Ford Mustang Service Bulletins
288 manufacturer communications on file.
- October 21, 2025•Document ID: 11024519Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- TSB 25-2500
- Date Added:
- October 28, 2025
- Manufacturer:
- FORD
SummaryThis article supersedes TSB 23-2334 to update the model years affected and part list. Some of the vehicles listed in the Model statement above may exhibit a sagging headliner or a gap where the headliner meets the upper door weatherstrip.
Associated Products (3)Associated Documents - September 24, 2025•Document ID: 11023547Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- TSB 25-2423
- Date Added:
- October 2, 2025
- Manufacturer:
- FORD
SummarySome of the vehicles listed in the Model statement above may exhibit at least one of the following conditions: - No upshift past second gear - Unable to achieve third gear ratio - Illuminated malfunction indicator lamp (MIL) with DTCs P0757 and P2701 This may be due to a damaged one-way clutch (OWC).
Associated Products (10)Associated Documents - September 19, 2025•Document ID: 11023289Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; UNKNOWN OR OTHER
- Mfr Comm. #:
- SSM 54232
- Date Added:
- September 23, 2025
- Manufacturer:
- FORD
SummarySome 2025 Mustang GTD vehicles built on or before 15-Jul-2025 may exhibit various suspension warning messages displayed in the instrument panel cluster (IPC) including but not limited to "Front Lift Not Available See Manual". The vehicle may also have diagnostic trouble code (DTC) C1041:92 stored in the vehicle dynamics control module (VDM). This may be due to the VDM software. To correct the condition, reprogram the VDM module using the latest software level of the Ford Diagnosis and Repair System (FDRS) scan tool. For claiming, use causal part 18B008 and labor operations 12651D and 12651D4.
Associated Products (1)Associated Documents - September 13, 2025•Document ID: 11023198Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- TSB 25-2429
- Date Added:
- September 18, 2025
- Manufacturer:
- FORD
SummaryThis bulletin supersedes TSB 25-2300 to update the production fix date. Some of the vehicles listed in the Model statement above may exhibit at least one of the following conditions: * Harsh engagement * Delayed engagement * Harsh shift * Delayed shift * Illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P0751, P0752, P0756, P0757, P0761, P0762, P0766, P0767, P0771, P0772, P2700, P2701, P2702, P2703, P2704, P2705, P2707, P2708, P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6 and/or P07F7 stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to PCM software and/or axial movement of the CDF clutch cylinder (7H351) sleeve causing hydraulic circuit leaks. NOTE: If internal transmission service is required to address a concern detected with the CDF clutch cylinder following this article, technicians should carefully inspect and replace other transmission components and flush transmission fluid cooler only as necessary to confirm proper function. Add a new line to the repair order to document any additional re
Associated Products (11)Associated Documents - September 10, 2025•Document ID: 11023202Service Bulletin/Repair InstructionsUNKNOWN OR OTHER; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 54206
- Date Added:
- September 18, 2025
- Manufacturer:
- FORD
SummarySome 2025 Mustang GTD vehicles may set diagnostic trouble code (DTC) U0420:82 in the image processing module a (IPMA) during a diagnostic self-test. This may be due to the module's DTC sensitivity during vehicle key-on/start-up. Replacement or reprogramming of the IPMA module may not resolve this condition. If no other DTCs are present, no warning indicators are illuminated while the engine is running, and no noticeable symptoms are present, no additional diagnostics or service is recommended for this condition at this time. Inform customers engineering is currently working on a solution for this condition that is expected in Q2 2026. Monitor Professional Technician System (PTS) for additional information and schedule service appointments for customers once the repair becomes available. If this condition is encountered, use the "Submit Global Concern Report (GCR)" link at the upper right of the Vehicle ID tab to submit a report and reference this article number in the report.
Associated Products (1)Associated Documents - September 3, 2025•Document ID: 11023856OtherENGINE; UNKNOWN OR OTHER
- Mfr Comm. #:
- 25H03
- Date Added:
- October 3, 2025
- Manufacturer:
- LINCOLN
SummaryHarvest Program 25H03 Certain 2024 - 2025 Model Year Bronco, Bronco Sport, Corsair, Escape, Explorer, Maverick, Mustang, and Ranger Vehicles with 1.5L, 2.0L, or 2.3L Engine Spark Plug Replacemen
Associated Products (16)Associated Documents - August 28, 2025•Document ID: 11022299OtherELECTRICAL SYSTEM; ENGINE
- Mfr Comm. #:
- 25H03
- Date Added:
- September 2, 2025
- Manufacturer:
- FORD
SummaryCertain 2024 - 2025 Model Year Bronco, Bronco Sport, Corsair, Escape, Explorer, Maverick, Mustang, and Ranger Vehicles with 1.5L, 2.0L, or 2.3L Engine Spark Plug Replacement
Associated Products (16)Associated Documents - August 22, 2025•Document ID: 11022391Service Bulletin/Repair InstructionsSTRUCTURE:BODY; VISIBILITY/WIPER
- Mfr Comm. #:
- TSB 25-2386
- Date Added:
- September 3, 2025
- Manufacturer:
- FORD
SummarySome of the vehicles listed in the Model Statement above may exhibit a quarter glass rubber moulding that is rolled over or folded in. This may be due to the installation of the quarter glass assembly.
Associated Products (2)Associated Documents - August 19, 2025•Document ID: 11022422Over The AirELECTRICAL SYSTEM; UNKNOWN OR OTHER
- Mfr Comm. #:
- PT-25.13.1 Mustang
- Date Added:
- September 3, 2025
- Manufacturer:
- FORD
Summary"Quality improvements include: -On-Board Diagnostics calibration for an enhanced Intake air temperature sensor performance"
Associated Products (1)Associated Documents - August 16, 2025•Document ID: 11021971Service Bulletin/Repair InstructionsPOWER TRAIN; ELECTRICAL SYSTEM
- Mfr Comm. #:
- TSB 25-2300
- Date Added:
- August 19, 2025
- Manufacturer:
- FORD
SummaryThis bulletin supersedes TSB 25-2131 to add reprogram for later level software, new Steps 1-4 in Service Procedure. Updated Part List with 3 superseded part numbers. Some of the vehicles listed in the Model statement above may exhibit at least one of the following conditions: * Harsh engagement * Delayed engagement * Harsh shift * Delayed shift * Illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P0751, P0752, P0756, P0757, P0761, P0762, P0766, P0767, P0771, P0772, P2700, P2701, P2702, P2703, P2704, P2705, P2707, P2708, P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6 and/or P07F7 stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to PCM software and/or axial movement of the CDF clutch cylinder (7H351) sleeve causing hydraulic circuit leaks. NOTE: If internal transmission service is required to address a concern detected with the CDF clutch cylinder following this article, technicians should carefully inspect, replace other transmission components and flush transmission fluid cooler only as necessary
Associated Products (11)Associated Documents - August 14, 2025•Document ID: 11021976Service Bulletin/Repair InstructionsFUEL/PROPULSION SYSTEM
- Mfr Comm. #:
- SSM 54138
- Date Added:
- August 19, 2025
- Manufacturer:
- FORD
SummarySome 2024-2025 F-150, Expedition/Navigator, Escape/Corsair, Bronco, Explorer, Mustang, Maverick vehicles equipped with a 1.5/2.0/2.3/3.5L EcoBoost engine and built on 01-Oct-2024 and through 31-May-2025 may exhibit an extended crank condition, strong fuel smell in the engine oil, high engine oil level and may have various drivability diagnostic trouble codes (DTCs) stored in the powertrain control module (PCM) with an illuminated malfunction indicator lamp (MIL). This may be due to an internal fuel leak of the fuel injection pump causing fuel to enter the crankcase and reduce fuel pressure in the high pressure fuel rail. Diagnose this condition using Pinpoint Test HP located in the Workshop Manual, Section 303-04A. If no DTCs are stored in the PCM, proceed from Step HP1 to Step HP5 and continue testing. For claiming, if fuel injection pump replacement is required, use causal part number 9D376 and labor operation code 9543A. If the root cause is identified as anything other than the fuel injection pump, claim the repair outside of this article. Note: Components damaged as a result of this failure mode
Associated Products (18)2025 Ford Bronco2025 Ford Bronco Sport2025 Ford Expedition2025 Ford Explorer2025 Ford F-1502025 Ford Maverick2025 Ford Mustang2025 Ford Ranger2025 Lincoln Corsair2025 Lincoln Navigator2024 Ford Bronco Sport2024 Ford Expedition2024 Ford Explorer2024 Ford F-1502024 Ford Maverick2024 Ford Mustang2024 Lincoln Corsair2024 Lincoln NavigatorAssociated Documents - August 7, 2025•Document ID: 11021803Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; UNKNOWN OR OTHER
- Mfr Comm. #:
- SSM 54116
- Date Added:
- August 12, 2025
- Manufacturer:
- LINCOLN
SummaryVarious 2019-2024 Ford and Lincoln vehicles equipped with SYNC 3 may experience a partially or fully black center display screen at start-up using Apple CarPlay or Android Auto. This does not affect rear camera operation. This may be due to interference from the phone being connected into the media hub using a universal serial bus (USB) cable during SYNC system boot up. To correct his condition, advise the customer to disconnect the USB cable from the phone. If the center display screen displays normally, reconnect the phone. If the concern persists, disconnect the phone from the USB cable, cycle the ignition off and open the driver's door so the interior lights come on. Close the door, start the vehicle and wait for the center display screen to boot up past the start-up animation and display the home screen, then reconnect the phone using the USB cable. If the concern persists after this procedure, follow normal Workshop Manual diagnostics for a blank screen concern.
Associated Products (34)2024 Ford Bronco Sport2024 Ford Explorer2024 Ford Maverick2024 Ford Transit2024 Lincoln Aviator2023 Ford Bronco Sport2023 Ford Explorer2023 Ford Maverick2023 Ford Mustang2023 Ford Ranger2023 Ford Transit2023 Lincoln Aviator2022 Ford Bronco Sport2022 Ford Ecosport2022 Ford Escape2022 Ford Explorer2022 Ford Maverick2022 Ford Mustang2022 Ford Ranger2022 Ford Transit+ 14 moreAssociated Documents - July 29, 2025•Document ID: 11021358Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 54090
- Date Added:
- August 4, 2025
- Manufacturer:
- FORD
SummarySome 2021-2025 Ford and Lincoln vehicles equipped with SYNC4/Digital Experience may exhibit an unsuccessful telematics control unit module (TCU) software update or software activation during a universal serial bus (USB) update. This may be due to the vehicle connectivity setting being disabled.
Associated Products (45)2025 Ford Bronco2025 Ford Bronco Sport2025 Ford Escape2025 Ford Expedition2025 Ford Explorer2025 Ford F-1502025 Ford Maverick2025 Ford Mustang2025 Ford Ranger2025 Ford Transit2025 Lincoln Aviator2025 Lincoln Corsair2025 Lincoln Nautilus2025 Lincoln Navigator2024 Ford Bronco2024 Ford Edge2024 Ford Escape2024 Ford Expedition2024 Ford F-1502024 Ford Mustang+ 25 moreAssociated Documents - July 26, 2025•Document ID: 11021211OtherENGINE; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 25P20
- Date Added:
- August 2, 2025
- Manufacturer:
- FORD
SummaryCertain 2025 Model Year Bronco, Explorer, Mustang, and Ranger Vehicles Engine Coolant Temperature Sensor Replacement On all affected vehicles, the Engine Coolant Temperature sensor (ECT) may have a poor solder joint internally, causing a Diagnostic Trouble Code (DTC) to set against the sensor for an open circuit and the check engine light to illuminate
Associated Products (4)Associated Documents - July 23, 2025•Document ID: 11020957Service Bulletin/Repair InstructionsUNKNOWN OR OTHER; VISIBILITY/WIPER
- Mfr Comm. #:
- SSM 54067
- Date Added:
- July 30, 2025
- Manufacturer:
- FORD
SummaryFor 2018-2024 Edge and 2018-2025 Mustang vehicles, if diagnostics lead to the sun visor as the causal part, a new lower level part is available (DS7Z-9904132-A). It is not necessary to replace the sun visor assembly if only the clip is damaged.
Associated Products (9)Associated Documents - July 11, 2025•Document ID: 11021203OtherWHEELS
- Mfr Comm. #:
- 25B30
- Date Added:
- August 2, 2025
- Manufacturer:
- FORD
SummaryCertain 2025 Model Year Mustang 60th Anniversary Vehicles Red Wheel Center Caps Replacement Dealers are to remove the black center wheel caps that are currently installed and replace with new red ones
Associated Products (1)Associated Documents - July 2, 2025•Document ID: 11020088Service Bulletin/Repair InstructionsUNKNOWN OR OTHER; ENGINE
- Mfr Comm. #:
- SSM 53991
- Date Added:
- July 2, 2025
- Manufacturer:
- FORD
SummarySome 2025 Mustang GTD vehicles may set diagnostic trouble code (DTC) U0420:82 in the image processing module a (IPMA) during a diagnostic self-test. This may be due to the module's DTC sensitivity during vehicle key-on/start-up. Replacement or reprogramming of the IPMA module may not resolve this condition. If no other DTCs are present, no warning indicators are illuminated while the engine is running, and no noticeable symptoms are present, no additional diagnostics or service is recommended for this condition at this time. Inform customers engineering is currently working on a solution for this condition that is expected in Q4 2025. Monitor Professional Technician System (PTS) for additional information and schedule service appointments for customers once the repair becomes available. If this condition is encountered, use the "Submit Global Concern Report (GCR)" link at the upper right of the Vehicle ID tab to submit a report and reference this article number in the report.
Associated Products (1)Associated Documents - June 25, 2025•Document ID: 11020044Service Bulletin/Repair InstructionsPOWER TRAIN; ENGINE
- Mfr Comm. #:
- SSM 53973
- Date Added:
- July 2, 2025
- Manufacturer:
- FORD
SummarySome 2021-2024 Edge/Nautilus, 2021-2025 Bronco/Bronco Sport/E-Series/Escape/Corsair/Expedition/Navigator/Explorer/Aviator/F-150/F-Super Duty/Mustang/Ranger, and 2022-2025 Maverick vehicles may require an A/C compressor clutch assembly replacement be performed for various concerns. Workshop Manual (WSM), Section 412-00 Removal and Installation has been updated to eliminate the need to remove and install the A/C compressor to change out the A/C Compressor clutch assembly.
Associated Products (76)2025 Ford Bronco2025 Ford Bronco Sport2025 Ford E-3502025 Ford E-4502025 Ford Escape2025 Ford Expedition2025 Ford Explorer2025 Ford F-1502025 Ford Maverick2025 Ford Mustang2025 Ford Ranger2025 Lincoln Aviator2025 Lincoln Corsair2024 Ford Bronco2024 Ford Bronco Sport2024 Ford E-3502024 Ford E-4502024 Ford Edge2024 Ford Escape2024 Ford Expedition+ 56 moreAssociated Documents - June 25, 2025•Document ID: 11020041Service Bulletin/Repair InstructionsPOWER TRAIN; ENGINE
- Mfr Comm. #:
- SSM 53971
- Date Added:
- July 2, 2025
- Manufacturer:
- FORD
SummarySome 2023-2025 Escape vehicles equipped with a 1.5L/2.0L EcoBoost engine, 2023-2025 Corsair vehicles equipped with a 2.0L EcoBoost engine, 2024-2025 Nautilus vehicles equipped with a 2.0L EcoBoost engine, 2024-2025 Mustang vehicles with a 2.3L EcoBoost engine, and 2025 Bronco/Explorer/Ranger vehicles equipped with a 2.3L EcoBoost engine may exhibit an engine misfire condition with diagnostic trouble codes (DTC) P0301, P0302, P0303 and/or P0304 set in the powertrain control module (PCM). This may be due to the spark plugs and/or ignition coils. To correct the condition, refer to Workshop Manual (WSM), Section 303-07 for normal diagnostics.
Associated Products (13)Associated Documents - June 24, 2025•Document ID: 11020049Service Bulletin/Repair InstructionsPOWER TRAIN; ENGINE
- Mfr Comm. #:
- SSM 53974
- Date Added:
- July 2, 2025
- Manufacturer:
- FORD
SummarySome 2024-2025 Mustang vehicles equipped with a 2.3L EcoBoost engine may require removal of the air conditioning compressor belt due to various concerns. Workshop Manual (WSM), Section 303-05 has been updated with improved removal and installation service procedure steps.
Associated Products (2)Associated Documents