Jeep Wrangler Service Bulletins
1,433 manufacturer communications on file.
- September 17, 2026•Document ID: 11037471Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- 23-044-26
- Date Added:
- September 23, 2026
- Manufacturer:
- JEEP
SummaryWindshield Wiper Blade Flipped Customers must experience one or more of the following: SYMPTOM: ● Streaking wiper blade. ● Buzz, squeak or rattle from the outer side of wiper blade on the glass. This bulletin involves replacing the driver's side windshield wiper blade.
Associated Products (1)Associated Documents - September 11, 2026•Document ID: 11037354Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- S2609000011
- Date Added:
- September 17, 2026
- Manufacturer:
- JEEP
SummaryMIL-On and/or Engine Oil Leak
Associated Products (11)Associated Documents - September 11, 2026•Document ID: 11037338Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- 23-043-26
- Date Added:
- September 17, 2026
- Manufacturer:
- JEEP
SummaryPowertrain Control Module (PCM) Bracket Not Properly Secured Customers may comment on the following: SYMPTOM: ● Buzz, Squeak or Rattle (BSR) from the front of vehicle in the engine compartment. This bulletin involves inspecting and possibly remounting the PCM bracket.
Associated Products (1)Associated Documents - September 10, 2026•Document ID: 11037349Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 9100904
- Date Added:
- September 17, 2026
- Manufacturer:
- JEEP
SummaryShifter If shifter is having trouble shifting between 1st and 2nd gear, then adjust cables as described in service library.
Associated Products (2)Associated Documents - September 9, 2026•Document ID: 11037337Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- 23-039-26
- Date Added:
- September 17, 2026
- Manufacturer:
- JEEP
SummarySteel Hood Vent Gap Customers may comment on one or more of the following: SYMPTOM: ● Gap between Steel Hood Vent and Performance Hood Fig. 1. ● Buzz, squeak and rattle noise. ● Hood pad water soaked after rain. ● Water leak through into the engine compartment. This bulletin involves Inspecting and possibly reseating the plastic hood vent.
Associated Products (1)Associated Documents - September 8, 2026•Document ID: 11037364OtherELECTRICAL SYSTEM
- Mfr Comm. #:
- OTHERDOC_177
- Date Added:
- September 17, 2026
- Manufacturer:
- JEEP
SummaryRadio Over The Air Update to U43.17 R1H Software Version (FOTA) Customers may experience one or more of the following:- Navigation Stability - Android Auto & Carplay stability & connectivity- Distorted/glitchy display prior to start‑up animation- Text appearance display- Widget incorrect display- Turn signal blind spot response timing- Audio cut out - Drive Modes selection- Park assist Guidelines selction
Associated Products (2)Associated Documents - September 8, 2026•Document ID: 11037353Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; SEATS
- Mfr Comm. #:
- S2623000048 REV.A
- Date Added:
- September 17, 2026
- Manufacturer:
- JEEP
SummaryCustomer States Driver Seat inoperative. Seat Fuse F59 30A Found blown.
Associated Products (4)Associated Documents - September 8, 2026•Document ID: 11037346Service Bulletin/Repair InstructionsSTRUCTURE:BODY; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 9100900
- Date Added:
- September 17, 2026
- Manufacturer:
- JEEP
SummaryPassive Entry O/S Dr Handle Prior to replacing an inoperative passive entry door handle, perform Star Online S2623000040.
Associated Products (36)2026 Chrysler Pacifica2026 Chrysler Voyager2026 Dodge Durango2026 Jeep Compass2026 Jeep Gladiator2026 Jeep Wrangler2025 Chrysler Pacifica2025 Chrysler Voyager2025 Dodge Durango2025 Jeep Compass2025 Jeep Gladiator2025 Jeep Wrangler2024 Chrysler Pacifica2024 Chrysler Voyager2024 Dodge Durango2024 Jeep Compass2024 Jeep Gladiator2024 Jeep Wrangler2023 Chrysler Pacifica2023 Chrysler Voyager+ 16 moreAssociated Documents - August 26, 2026•Document ID: 11036762Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- 9100363 Rev 3
- Date Added:
- September 3, 2026
- Manufacturer:
- JEEP
SummaryTurbocharger Kit Please note that many turbo components are serviceable separately and full turbo replacement may not be required. If the turbo is being inspected for: Noise/Rattle: Inspect heat shield fasteners for looseness and check the wastegate actuator/linkage for binding. The actuator kit is serviced separately. Oil Leak: Inspect the turbo oil feed O-ring area for leaks. O-ring is serviced separately.
Associated Products (13)Associated Documents - August 25, 2026•Document ID: 11036752Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- 23-036-26
- Date Added:
- September 3, 2026
- Manufacturer:
- JEEP
SummaryWater Leak In Rear Cargo Area Customers may comment on the following: SYMPTOM: ● Water leak in the rear cargo area.
Associated Products (3)Associated Documents - August 12, 2026•Document ID: 11036282Warranty Program/ExtensionSTRUCTURE:BODY
- Mfr Comm. #:
- 114045
- Date Added:
- August 19, 2026
- Manufacturer:
- JEEP
SummaryID-25-11 Rev. C Aluminum Filiform Corrosion Warranty Policy and Vehicle Digital Imaging (VDI) Pre-Approval Process - ALL Vehicles
Associated Products (6)Associated Documents - August 12, 2026•Document ID: 11036281Warranty Program/ExtensionSTRUCTURE:BODY
- Mfr Comm. #:
- 114044
- Date Added:
- August 19, 2026
- Manufacturer:
- JEEP
SummaryD-25-15 Rev. C Aluminum Filiform Corrosion Warranty Policy and Vehicle Digital Imaging (VDI) Pre-Approval Process - ALL Vehicles
Associated Products (6)Associated Documents - August 6, 2026•Document ID: 11036183Warranty Program/ExtensionELECTRICAL SYSTEM
- Mfr Comm. #:
- 16C Combo Rev3
- Date Added:
- August 13, 2026
- Manufacturer:
- JEEP
SummaryEMISSION RECALL – NORTH AMERICA Check Engine/Malfunction Indicator Lamp 16C The instrument panel cluster on about 32,587 of the above vehicles may have an inoperable check engine/malfunction indicator lamp (CEL/MIL). (JT) vehicles: CEL/MIL and cargo lamp indicator function are swapped. (JL) vehicles: CEL/MIL will not turn on. The CEL/MIL in and of itself will not affect emissions. However, if there was an emission issue that would require illumination of the CEL/MIL, the customer would not be alerted. The vehicle would be non-compliant to the OBD II regulation.
Associated Products (4)Associated Documents - August 5, 2026•Document ID: 11036181Service Bulletin/Repair InstructionsSEATS
- Mfr Comm. #:
- S2623000048
- Date Added:
- August 13, 2026
- Manufacturer:
- JEEP
SummaryCustomer States Driver Seat Inoperative.
Associated Products (4)Associated Documents - August 5, 2026•Document ID: 11036172Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- 113835
- Date Added:
- August 13, 2026
- Manufacturer:
- JEEP
SummaryCOVER - CYLINDER HEAD
Associated Products (4)Associated Documents - August 3, 2026•Document ID: 11036167Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- 113792
- Date Added:
- August 13, 2026
- Manufacturer:
- JEEP
SummaryPAD - INSTRUMENT PANEL
Associated Products (6)Associated Documents - July 27, 2026•Document ID: 11035991Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 9100872
- Date Added:
- August 6, 2026
- Manufacturer:
- JEEP
SummaryDisplay Exchange part has been superseded. Order the latest Z part number: Z8607669AC --> Z8791155AA (Active Exchange Part) Z8607669AD --> Z8791669AA (Active Exchange Part) Z8607669AE --> Z8791156AA (Active Exchange Part) Z8607671AC --> Z8791157AA (Active Exchange Part) Z8607671AD --> Z8791158AA (Active Exchange Part) Z8607671AE --> Z8791159AA (Active Exchange Part)
Associated Products (6)Associated Documents - July 16, 2026•Document ID: 11035159Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 03-003-26
- Date Added:
- July 23, 2026
- Manufacturer:
- JEEP
SummaryRear Driveshaft Out Of Balance Customers may comment on one or more of the following: SYMPTOM: ● Vehicle exhibits a vibration that increases with speed that can be felt in the seat or floor. ● Oil is leaking from the Constant Velocity (CV) joint cover. This bulletin involves replacing the rear drive shaft.
Associated Products (1)Associated Documents - July 15, 2026•Document ID: 11035200Service CampaignSERVICE BRAKES
- Mfr Comm. #:
- 56D Combo
- Date Added:
- July 23, 2026
- Manufacturer:
- JEEP
SummaryCustomer Satisfaction Notification 56D – Antilock Brake System Control Module Software - Dealer Notification
Associated Products (1)Associated Documents - July 15, 2026•Document ID: 11035192Service Bulletin/Repair InstructionsFUEL/PROPULSION SYSTEM
- Mfr Comm. #:
- 9100840
- Date Added:
- July 23, 2026
- Manufacturer:
- JEEP
SummarySwitchbank 4 gang The customer will notice either one or two of the following conditions: 1. Fuel Door is Not opening when Fuel door Switch is pushed. Technician Observe the DTC P04CB-FUEL FILL DOOR OPEN REQUEST SENSOR-SWITCH CIRCUIT HIGH. 2. Drives Modes do not work when Switch is pressed (Hybrid, Electric, E-save). Technician Observe DTC U113B-LOST COMMUNICATION WITH SWITCH BANK MODULE. Procedure: If during vehicle Scan diagnostics besides DTC's P04CA, P04CB or U113B. there are another DTCs Repair it First accordingly. DTC's may be related to main ECU's like: HCP, BCM, PCM, etc. If DTC P04CB and/or U113B are still present, then follow the following action before replacing the Switch: 1. Read vehicle DTCs while the IGN ON. 2. Verify ESBM feed fuse state. Replace the fuse if needed. 3. Wiggle the ESBM harness takeout (LIN and ESBM feed takeout) and monitor the state of DTC P04CB and/or U113B. o If this step affects DTC P04CB and/or U113B. behavior, the issue is likely related to a failure in the harness. 4. Disconnect the harness from the ESBM and confirm there not any damage, like bend PINs, corrosion, etc. 5. Confirm Harness continuity. 6. Verify power to ESBM by back probing the ESBM connector o If voltage is lower than 11.8V, follow normal procedures for low batteries. - If there no damage in the harness nor the connector and pins of the ESBM, reconnect it ensuring the harness connector is being fully engaged into the ESBM connector. 7. Confirm Continuity of the harness from the ESBM connector to the BCM connectors. 8. Reconnect the ESBM and then Verify LIN bus activity with Mopar scope. o Config scope to LIN monitor if feasible. o Replace the ESBM only based confirmation from the LIN diagnostic. 9. With the scan tool, read DTCs. If still DTC are set, replace ESBM (Fuel door and drive modes Switch module) in accordance with the Service Information. Flag the part to be returned to supplier for further part analysis.
Associated Products (3)Associated Documents