Hyundai Elantra Service Bulletins
684 manufacturer communications on file.
- April 28, 2022•Document ID: 10211667Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 22-01-028H-1
- Date Added:
- May 10, 2022
- Manufacturer:
- HYUNDAI
SummaryHyundai is conducting a campaign to enhance the knock sensor software to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, and the vehicle will be placed in Engine Protection Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair. In addition, DTC P132600 will be recorded in the ECM. The vehicle can continue to be operated for a limited time in Engine Protection Mode, but it will accelerate slower and have a reduced maximum speed. Engine RPMs will be limited to approximately 1800-2000 RPM.
Associated Products (40)2021 Hyundai Tucson2020 Hyundai Elantra GT2020 Hyundai Tucson2019 Hyundai Elantra GT2019 Hyundai Sonata2019 Hyundai Tucson2018 Hyundai Elantra GT2018 Hyundai Sonata2018 Hyundai Tucson2017 Hyundai Elantra GT2017 Hyundai Sonata2017 Hyundai Tucson2017 Hyundai Veloster2016 Hyundai Elantra2016 Hyundai Elantra GT2016 Hyundai Sonata2016 Hyundai Tucson2016 Hyundai Veloster2015 Hyundai Elantra2015 Hyundai Elantra GT+ 20 moreAssociated Documents - April 28, 2022•Document ID: 10211666Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 22-01-023H-1
- Date Added:
- May 10, 2022
- Manufacturer:
- HYUNDAI
SummaryCertain vehicles listed below may experience the Check Engine warning lamp illuminated with DTC P1326 and/or an engine concern/noise related to connecting rod bearing wear or damage. Follow the procedure to inspect the vehicle and replace the engine and/or update the engine ECU software (if new ROM is available) based on the inspection results.
Associated Products (40)2021 Hyundai Tucson2020 Hyundai Elantra GT2020 Hyundai Tucson2019 Hyundai Elantra GT2019 Hyundai Sonata2019 Hyundai Tucson2018 Hyundai Elantra GT2018 Hyundai Sonata2018 Hyundai Tucson2017 Hyundai Elantra GT2017 Hyundai Sonata2017 Hyundai Tucson2017 Hyundai Veloster2016 Hyundai Elantra2016 Hyundai Elantra GT2016 Hyundai Sonata2016 Hyundai Tucson2016 Hyundai Veloster2015 Hyundai Elantra2015 Hyundai Elantra GT+ 20 moreAssociated Documents - April 28, 2022•Document ID: 10211664Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- DBP966
- Date Added:
- May 10, 2022
- Manufacturer:
- HYUNDAI
SummaryHyundai is conducting a service campaign to enhance the knock sensor software to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, and the vehicle will be placed in Engine Protection Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair. In addition, DTC P132600 will be recorded in the ECM. The vehicle can continue to be operated for a limited time in Engine Protection Mode, but it will accelerate slower and have a reduced maximum speed. Engine RPMs will be limited to approximately 1800-2000 RPM.
Associated Products (40)2021 Hyundai Tucson2020 Hyundai Elantra GT2020 Hyundai Tucson2019 Hyundai Elantra GT2019 Hyundai Sonata2019 Hyundai Tucson2018 Hyundai Elantra GT2018 Hyundai Sonata2018 Hyundai Tucson2017 Hyundai Elantra GT2017 Hyundai Sonata2017 Hyundai Tucson2017 Hyundai Veloster2016 Hyundai Elantra2016 Hyundai Elantra GT2016 Hyundai Sonata2016 Hyundai Tucson2016 Hyundai Veloster2015 Hyundai Elantra2015 Hyundai Elantra GT+ 20 moreAssociated Documents - April 28, 2022•Document ID: 10211662Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- DBPT6G
- Date Added:
- May 10, 2022
- Manufacturer:
- HYUNDAI
SummaryCertain vehicles that have completed Service Campaign 966 may experience the Check Engine warning lamp illuminated with DTC P1326 and/or an engine concern/noise related to connecting rod bearing wear or damage. Follow the procedure to inspect the vehicle and replace the engine and/or update the engine ECU software (if new ROM is available) based on the inspection results.
Associated Products (40)2021 Hyundai Tucson2020 Hyundai Elantra GT2020 Hyundai Tucson2019 Hyundai Elantra GT2019 Hyundai Sonata2019 Hyundai Tucson2018 Hyundai Elantra GT2018 Hyundai Sonata2018 Hyundai Tucson2017 Hyundai Elantra GT2017 Hyundai Sonata2017 Hyundai Tucson2017 Hyundai Veloster2016 Hyundai Elantra2016 Hyundai Elantra GT2016 Hyundai Sonata2016 Hyundai Tucson2016 Hyundai Veloster2015 Hyundai Elantra2015 Hyundai Elantra GT+ 20 moreAssociated Documents - April 8, 2022•Document ID: 10211680Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 22-ST-005H
- Date Added:
- May 10, 2022
- Manufacturer:
- HYUNDAI
SummaryCertain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing.
Associated Products (30)2022 Hyundai Ioniq2022 Hyundai Kona2022 Hyundai Palisade2021 Hyundai Ioniq2021 Hyundai Kona2021 Hyundai Palisade2021 Hyundai Sonata2020 Hyundai Elantra2020 Hyundai Elantra GT2020 Hyundai Ioniq2020 Hyundai Kona2020 Hyundai Palisade2020 Hyundai Sonata2019 Hyundai Elantra2019 Hyundai Elantra GT2019 Hyundai Ioniq2019 Hyundai Kona2019 Hyundai Santa Fe2019 Hyundai Santa Fe XL2019 Hyundai Sonata+ 10 moreAssociated Documents - April 8, 2022•Document ID: 10211678Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 22-ST-005H
- Date Added:
- May 10, 2022
- Manufacturer:
- HYUNDAI
SummaryCertain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing.
Associated Products (32)2022 Hyundai Ioniq2022 Hyundai Ioniq 52022 Hyundai Kona2022 Hyundai Palisade2021 Hyundai Ioniq2021 Hyundai Kona2021 Hyundai Palisade2021 Hyundai Sonata2020 Hyundai Elantra2020 Hyundai Elantra GT2020 Hyundai Ioniq2020 Hyundai Kona2020 Hyundai Palisade2020 Hyundai Sonata2019 Hyundai Elantra2019 Hyundai Elantra GT2019 Hyundai Ioniq2019 Hyundai Kona2019 Hyundai Santa Fe2019 Hyundai Santa Fe XL+ 12 moreAssociated Documents - April 7, 2022•Document ID: 10211670Service Bulletin/Repair InstructionsBACK OVER PREVENTION
- Mfr Comm. #:
- 22-01-038H
- Date Added:
- May 10, 2022
- Manufacturer:
- HYUNDAI
SummarySome 2022 Elantra (CN7) vehicles may exhibit one or both of the following conditions: ⢠When driving and the vehicle blind spot collision warning alert sound is on; upon reduction of speed below 10 mph, the warning sound does not turn off. ⢠When backing up/moving in reverse and the rear cross traffic collision audible warning sound is on; upon changing the transmission into Drive, the warning sound does not turn off. This bulletin provides the service procedure to update the left and right BCA (Blind-Spot Collision-Avoidance Assist) modules software to resolve the condition(s) stated above.
Associated Products (1)Associated Documents - March 31, 2022•Document ID: 10210210Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 22-01-032H
- Date Added:
- April 8, 2022
- Manufacturer:
- HYUNDAI
SummaryOn certain 2021 Elantra and 2022 Kona vehicles equipped with 2.0L engine, a coolant leak at the Water Temperature Sensor (WTS) may be observed due to machining burrs at the mounting port of the cylinder head, resulting in improper coolant sealing.
Associated Products (2)Associated Documents - March 21, 2022•Document ID: 10210209Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 22-01-030H
- Date Added:
- April 8, 2022
- Manufacturer:
- HYUNDAI
SummaryCertain 20MY Elantra (AD/ADa) vehicles may experience an illuminated check engine warning light due to Diagnostic Trouble Codes (DTC) listed below. Perform the Transmission Control Unit (TCU) update, and, if necessary, replace the IVT (Intelligent Variable Transmission) to resolve this condition. This update also includes the software for optimizing CLR_DIST (distance traveled since DTCs cleared) display. ⢠TCU DTC Codes: P0730, P0731, P0741, P0867, P1603
Associated Products (1)Associated Documents - March 10, 2022•Document ID: 10210206Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 22-01-023H
- Date Added:
- April 8, 2022
- Manufacturer:
- HYUNDAI
SummaryCertain vehicles listed below may experience the Check Engine warning lamp illuminated with DTC P1326 and/or an engine concern/noise related to connecting rod bearing wear or damage. Follow the procedure to inspect the vehicle and replace the engine and/or update the engine ECU software (if new ROM is available) based on the inspection results.
Associated Products (36)2019 Hyundai Elantra GT2019 Hyundai Sonata2018 Hyundai Elantra GT2018 Hyundai Sonata2018 Hyundai Tucson2017 Hyundai Elantra GT2017 Hyundai Sonata2017 Hyundai Tucson2017 Hyundai Veloster2016 Hyundai Elantra2016 Hyundai Elantra GT2016 Hyundai Sonata2016 Hyundai Tucson2016 Hyundai Veloster2015 Hyundai Elantra2015 Hyundai Elantra GT2015 Hyundai Sonata2015 Hyundai Tucson2015 Hyundai Veloster2014 Hyundai Elantra+ 16 moreAssociated Documents - March 8, 2022•Document ID: 10210205Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 22-01-028H
- Date Added:
- April 8, 2022
- Manufacturer:
- HYUNDAI
SummaryHyundai is conducting a campaign to enhance the knock sensor software to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, and the vehicle will be placed in Engine Protection Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair. In addition, DTC P132600 will be recorded in the ECM. The vehicle can continue to be operated for a limited time in Engine Protection Mode, but it will accelerate slower and have a reduced maximum speed. Engine RPMs will be limited to approximately 1800-2000 RPM.
Associated Products (36)2019 Hyundai Elantra GT2019 Hyundai Sonata2018 Hyundai Elantra GT2018 Hyundai Sonata2018 Hyundai Tucson2017 Hyundai Elantra GT2017 Hyundai Sonata2017 Hyundai Tucson2017 Hyundai Veloster2016 Hyundai Elantra2016 Hyundai Elantra GT2016 Hyundai Sonata2016 Hyundai Tucson2016 Hyundai Veloster2015 Hyundai Elantra2015 Hyundai Elantra GT2015 Hyundai Sonata2015 Hyundai Tucson2015 Hyundai Veloster2014 Hyundai Elantra+ 16 moreAssociated Documents - March 3, 2022•Document ID: 10210204Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 22-01-027H
- Date Added:
- April 8, 2022
- Manufacturer:
- HYUNDAI
SummaryCertain Elantra N (CN7 N) vehicles may have been produced with the clutch disc installed in the reverse direction, potentially causing premature wear due to less clearance between the disc and pressure plate. This bulletin outlines the procedures to inspect the clutch disc, and if necessary, repair the condition.
Associated Products (1)Associated Documents - February 7, 2022•Document ID: 10208864Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 22-01-014H
- Date Added:
- March 8, 2022
- Manufacturer:
- HYUNDAI
SummaryThis bulletin describes the procedure to update wireless CarPlay to alleviate frequent disconnection of wireless CarPlay caused by other wireless noise from unknown sources which could make wireless communication unstable between D-Audio and mobile phone.
Associated Products (5)Associated Documents - January 31, 2022•Document ID: 10207810Service Bulletin/Repair InstructionsSTRUCTURE; EQUIPMENT
- Mfr Comm. #:
- 22-BD-001H
- Date Added:
- February 8, 2022
- Manufacturer:
- HYUNDAI
SummaryCertain 2021MY Elantra vehicles may exhibit paint delamination on the left, right and lower moldings of the front bumper. Follow the procedure outlined in this bulletin to remove and replace the dark chrome front bumper moldings.
Associated Products (1)Associated Documents - January 12, 2022•Document ID: 10207807Service Bulletin/Repair InstructionsPOWER TRAIN; EQUIPMENT
- Mfr Comm. #:
- 22-01-007H
- Date Added:
- February 8, 2022
- Manufacturer:
- HYUNDAI
SummaryCertain vehicles equipped with 7-speed Double Clutch Transmissions (DCT) may exhibit abnormal shifting caused by an out of specification input shaft snap ring. This bulletin outlines the procedures for inspecting for 1-2 or 2-1 shift shock and replacing the input shaft snap ring.
Associated Products (3)Associated Documents - January 3, 2022•Document ID: 10207803Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 21-01-023H-4
- Date Added:
- February 8, 2022
- Manufacturer:
- HYUNDAI
SummaryHyundai is conducting a campaign to enhance the knock sensor software to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, and the vehicle will be placed in Engine Protection Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair. In addition, DTC P132600 will be recorded in the ECM. The vehicle can continue to be operated for a limited time in Engine Protection Mode, but it will accelerate slower and have a reduced maximum speed. Engine RPMs will be limited to approximately 1800-2000 RPM.
Associated Products (35)2019 Hyundai Elantra GT2018 Hyundai Elantra GT2018 Hyundai Sonata2018 Hyundai Tucson2017 Hyundai Elantra GT2017 Hyundai Sonata2017 Hyundai Tucson2017 Hyundai Veloster2016 Hyundai Elantra2016 Hyundai Elantra GT2016 Hyundai Sonata2016 Hyundai Tucson2016 Hyundai Veloster2015 Hyundai Elantra2015 Hyundai Elantra GT2015 Hyundai Sonata2015 Hyundai Tucson2015 Hyundai Veloster2014 Hyundai Elantra2014 Hyundai Elantra GT+ 15 moreAssociated Documents - December 23, 2021•Document ID: 10206367Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- DBP972
- Date Added:
- January 8, 2022
- Manufacturer:
- HYUNDAI
SummaryWhen asked to provide the Modem Information, the Universal Subscriber Identity Module (USIM) may not be available. This TSB# 21-01-080H describes the 3-part software to correct this condition and activate Blue Link Services.
Associated Products (13)Associated Documents - December 23, 2021•Document ID: 10206363Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 21-01-080H
- Date Added:
- January 8, 2022
- Manufacturer:
- HYUNDAI
SummaryWhen asked to provide the Modem Information, the Universal Subscriber Identity Module (USIM) information is not available. This bulletin describes the 3-part Software to correct this condition and activate Blue Link Services.
Associated Products (13)Associated Documents - December 21, 2021•Document ID: 10206366Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- DBP966
- Date Added:
- January 8, 2022
- Manufacturer:
- HYUNDAI
SummaryHyundai is conducting a service campaign to enhance the knock sensor software to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, and the vehicle will be placed in Engine Protection Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair. In addition, DTC P132600 will be recorded in the ECM. The vehicle can continue to be operated for a limited time in Engine Protection Mode, but it will accelerate slower and have a reduced maximum speed. Engine RPMs will be limited to approximately 1800-2000 RPM.
Associated Products (35)2019 Hyundai Elantra GT2018 Hyundai Elantra GT2018 Hyundai Sonata2018 Hyundai Tucson2017 Hyundai Elantra GT2017 Hyundai Sonata2017 Hyundai Tucson2017 Hyundai Veloster2016 Hyundai Elantra2016 Hyundai Elantra GT2016 Hyundai Sonata2016 Hyundai Tucson2016 Hyundai Veloster2015 Hyundai Elantra2015 Hyundai Elantra GT2015 Hyundai Sonata2015 Hyundai Tucson2015 Hyundai Veloster2014 Hyundai Elantra2014 Hyundai Elantra GT+ 15 moreAssociated Documents - November 16, 2021•Document ID: 10204251Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 968DBP20211116
- Date Added:
- December 9, 2021
- Manufacturer:
- HYUNDAI
SummaryThis update includes information related to Electronic Control Module (ECM) software to revise control logic for completion of OBD-II Fuel System Readiness Monitor diagnosis.
Associated Products (3)Associated Documents