Dodge Charger Service Bulletins
1,783 manufacturer communications on file.
- March 24, 2026•Document ID: 11030414Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-134-26
- Date Added:
- April 1, 2026
- Manufacturer:
- DODGE
SummaryUniversal Garage Door Opener (UGDO) Inoperable Technicians may or may not find the following Diagnostic Trouble Code (DTC) present: SYMPTOM: ● B251D1-00 - Universal Garage Door Opener Control. Customers may comment on the following: ● Operational questions regarding the usage of the HomeLink® UGDO. . No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise, without written permission of FCA US LLC.
Associated Products (49)2026 Chrysler Pacifica2026 Chrysler Voyager2026 Dodge Charger2026 Jeep Cherokee2026 Jeep Compass2026 Jeep Gladiator2026 Jeep Grand Cherokee2026 Jeep Grand Cherokee L2026 Jeep Grand Wagoneer2026 Jeep Wagoneer2026 Jeep Wagoneer S2026 Jeep Wrangler2026 Ram 15002026 Ram 25002026 Ram 35002026 Ram 45002026 Ram 55002025 Chrysler Pacifica2025 Chrysler Voyager2025 Dodge Charger+ 29 moreAssociated Documents - March 21, 2026•Document ID: 11030229Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- 18-044-26
- Date Added:
- March 25, 2026
- Manufacturer:
- JEEP
SummaryFlash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P0111-00 - Intake Air Temperature Sensor 1 Circuit Range Performance Bank 1. (In Active or Stored status) ● P0071-00 - Ambient Air Temperature Sensor Performance. (In Active or Stored status) ● P0072-00 - Ambient Air Temperature Sensor Circuit "A" Low. (In Active or Stored status) ● P0073-00 - Ambient Air Temperature Sensor Circuit "A" High. (In Active or Stored status) ● P0011-00 - Bank 1 Camshaft 1 Position Timing Over Advanced Or. (In Active or Stored status) ● P25E4-00 - B Camshaft Position - Unable To Achieve Locked Position Bank 1. (In Active or Stored status) ● P05BD-00 - Stop-Start Mode Switch Range/Performance. (In Active or Stored status) ● P0116-00 - Engine Coolant Temperature Sensor 1 Performance. (In Active or Stored status) ● P062B-00 - Internal Control Module Fuel Injector Control Performance. (In Active or Stored status) ● P0604-00 - Internal Control Module Random Access Memory Ram Error. (In Active or Stored status) ● P060C-00 - Internal Control Module Main Processor Performance. (In Active or Stored status)** ● P018B-00 - Fuel Pressure Sensor "B" Circuit Range/performance. **(In Active or Stored status)** ● P1CEA-00 - Boost Side EVAP Purge System Performance. **(In Active or Stored status)** ● P06DD-00 - Engine Oil Pressure Control Circuit Performance/Stuck Off. **(In Active or Stored status)** ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking. **(In Active or Stored status)** ● P0300-00 - Multiple Cylinder Misfire. **(In Active or Stored status)** Customers may also experience one or more of the following: ● **Oil Level High Warning in the Instrument Panel Cluster (IPC).** ● Fully Autonomous Parking Assist (FAPA) is not deactivated when accelerator pedal is pressed. ● Vehicle is not heating up fast enough at freezi
Associated Products (133)2026 Chrysler Pacifica2026 Chrysler Voyager2026 Dodge Durango2026 Jeep Cherokee2026 Jeep Compass2026 Jeep Grand Cherokee2026 Jeep Grand Cherokee L2026 Jeep Grand Wagoneer2026 Jeep Wagoneer2026 Jeep Wagoneer S2026 Jeep Wrangler2026 Ram 15002026 Ram 25002026 Ram 35002026 Ram 45002026 Ram 55002025 Chrysler Pacifica2025 Chrysler Voyager2025 Dodge Durango2025 Jeep Compass+ 113 moreAssociated Documents - March 18, 2026•Document ID: 11030269Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- S2208000045 REV.C
- Date Added:
- March 25, 2026
- Manufacturer:
- CHRYSLER
SummaryBackup Camera Poor Image Quality Inspection
Associated Products (79)2026 Chrysler Pacifica2026 Chrysler Voyager2026 Dodge Durango2025 Chrysler Pacifica2025 Chrysler Voyager2025 Dodge Durango2024 Chrysler Pacifica2024 Chrysler Voyager2024 Dodge Durango2024 Ram 15002024 Ram 25002024 Ram 35002024 Ram 45002024 Ram 55002023 Chrysler 3002023 Chrysler Pacifica2023 Chrysler Voyager2023 Dodge Challenger2023 Dodge Charger2023 Dodge Durango+ 59 moreAssociated Documents - March 14, 2026•Document ID: 11030130Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-110-26 REV.A
- Date Added:
- March 18, 2026
- Manufacturer:
- DODGE
SummaryRSU With Additional Sleep Cycles for HV Battery Integrity Check - Flash: Battery Pack Control Module (BPCM) Updates 11B3 Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more the following Diagnostic Trouble Codes (DTCs): ● P0AA7-00 - Hybrid/EV Battery Pack "A" Voltage Isolation Sensor. ● P1614-00 - ECU Reset/Recovery Occurred. ● B1A8A-00 - Multi-Module VIN Handshake Failure. ● P1CDB-00 - Hybrid/EV Wakeup Control 1 Output Circuit Short To Battery. ● P1E25-00 - EV Battery Failure Level 2. ● P0D10-00 - Hybrid/EV Battery Negative Contactor A Stuck Open. ● P0D09-00 - Hybrid/EV Battery Positive Contactor A Stuck Open. ● P0DE6-00 - Hybrid/EV Battery Pack Cell Voltage Low. NOTE: Active or stored. ● P1DAF - Incompatible Limp In Action Requested. NOTE: Active or stored. ● P1CDE-00 - Hybrid/EV Wakeup Control 2 Output Circuit Short to Ground. ● P1CDA-00 - Hybrid/EV Wakeup Control 1 Output Circuit/Open. ● U00C6-00 - Lost Communication With AIR Pressure Sensor. ● P0F00-00 - Hybrid/EV Battery Module 1 Performance. ● P0F01-00 - Hybrid/EV Battery Module 2 Performance. ● P0F02-00 - Hybrid/EV Battery Module 3 Performance. ● P0F03-00 - Hybrid/EV Battery Module 4 Performance. ● P0F04-00 - Hybrid/EV Battery Module 5 Performance. ● P0F05-00 - Hybrid/EV Battery Module 6 Performance. ● P0F06-00 - Hybrid/EV Battery Module 7 Performance. ● P0F07-00 - Hybrid/EV Battery Module 8 Performance. ● P0F08-00 - Hybrid/EV Battery Module 9 Performance. ● P0F09-00 - Hybrid/EV Battery Module 10 Performance. ● P0F0A-00 - Hybrid/EV Battery Module 11 Performance. ● P0F0B-00 - Hybrid/EV Battery Module 12 Performance. ● P0F0C-00 - Hybrid/EV Battery Module 13 Performance. ● P0CA6-00 - Hybrid/EV Battery Charging Current High NOTE: If the following DTCs are present/active in the BPCM, Battery Pack replacement will be required. Guided Diagnostics will prompt you for the repair action if the diagnostic is present on the vehicle. ● P0ADB-00 - Hybrid/EV Battery Positive Contractor A Control Circuit Low. ● P0AE2-00 - Hybrid/EV Battery Precharge Contactor Circuit Stuck Closed. ● P0AA1-00 - Hybrid/EV Battery Positive Contactor "A" Stuck Closed. ● P0FF8-00 - Hybrid/EV Battery Precharge Contactor Circuit "B" Stuck Closed. Customers may also comment on one or more of the following: ● Vehicle will not start. ● A warning message will appear in the Instrument Panel Cluster (IPC) informing the driver to stop safely because the vehicle will be shutting down soon. ● Wrench icon is illuminated on the IPC. ● Vehicle will not enter Drive Ready Mode. This bulletin also includes the following software enhancements: ● Software enhancements to prevent multiple DTCs from falsely setting. ● Improved battery State of Charge (SoC) accuracy in off-nominal conditions. ● Bootloader update to prevent battery disconnect unit damage. ● Improvements in detecting pre-existing battery disconnect unit damage. ● Charging related enhancements that may lead to DTC P0CA6 falsely setting This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine.
Associated Products (1)Associated Documents - March 13, 2026•Document ID: 11030151Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 9100782
- Date Added:
- March 18, 2026
- Manufacturer:
- DODGE
SummaryTBM2.0H Setting U0080-00. Do not replace TBM ECU or SGW. Under certain conditions, SGW Module may take longer to establish Ethernet communication after boot up. If it takes longer than 30 seconds, The TBM2.0H module will set DTC U0080 - Ethernet Bus 1. As soon as SGW responds, the TBM2.0H will demature the DTC and move it to STORED. This issue should not cause any customer related symptoms. Do not replace following TBM part numbers: 68592342AE, 68592342AI, 68592342AJ, 68592342AM, 68592342AP. If the TBM2.0H module has set the DTC U0080 and it is STORED or ACTIVE, please clear the fault and do nothing. No further diagnostics is required.
Associated Products (3)Associated Documents - March 11, 2026•Document ID: 11030120Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-110-26
- Date Added:
- March 18, 2026
- Manufacturer:
- DODGE
SummaryRSU With Additional Sleep Cycles for HV Battery Integrity Check Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may SYMPTOM: exhibit/set one or more the following Diagnostic Trouble Codes (DTCs): ● P0AA7-00 - Hybrid/EV Battery Pack "A" Voltage Isolation Sensor. ● P1614-00 - ECU Reset/Recovery Occurred. ● B1A8A-00 - Multi-Module VIN Handshake Failure. ● P1CDB-00 - Hybrid/EV Wakeup Control 1 Output Circuit Short To Battery. ● P1E25-00 - EV Battery Failure Level 2. ● P0D10-00 - Hybrid/EV Battery Negative Contactor A Stuck Open. ● P0D09-00 - Hybrid/EV Battery Positive Contactor A Stuck Open. ● P0DE6-00 - Hybrid/EV Battery Pack Cell Voltage Low. NOTE: Active or stored. ● P1DAF - Incompatible Limp In Action Requested. NOTE: Active or stored. ● P1CDE-00 - Hybrid/EV Wakeup Control 2 Output Circuit Short to Ground. ● P1CDA-00 - Hybrid/EV Wakeup Control 1 Output Circuit/Open. ● U00C6-00 - Lost Communication With AIR Pressure Sensor. ● P0F00-00 - Hybrid/EV Battery Module 1 Performance. ● P0F01-00 - Hybrid/EV Battery Module 2 Performance. ● P0F02-00 - Hybrid/EV Battery Module 3 Performance. ● P0F03-00 - Hybrid/EV Battery Module 4 Performance. ● P0F04-00 - Hybrid/EV Battery Module 5 Performance. ● P0F05-00 - Hybrid/EV Battery Module 6 Performance. ● P0F06-00 - Hybrid/EV Battery Module 7 Performance. ● P0F07-00 - Hybrid/EV Battery Module 8 Performance. ● P0F08-00 - Hybrid/EV Battery Module 9 Performance. ● P0F09-00 - Hybrid/EV Battery Module 10 Performance. ● P0F0A-00 - Hybrid/EV Battery Module 11 Performance. ● P0F0B-00 - Hybrid/EV Battery Module 12 Performance. ● P0F0C-00 - Hybrid/EV Battery Module 13 Performance. ● P0CA6-00 - Hybrid/EV Battery Charging Current High. M08 FSAR-TSB-7132 -2- NOTE: If the following DTCs are present/active in the BPCM, Battery Pack replacement will be required. Guided Diagnostics will prompt you for the repair action if the diagnostic is present on the vehicle. ● P0ADB-00 - Hybrid/EV Battery Positive Contract
Associated Products (1)Associated Documents - March 9, 2026•Document ID: 11030138Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- S2621000003 REV.A
- Date Added:
- March 18, 2026
- Manufacturer:
- DODGE
SummaryThe vehicle will exhibit a service transmission/check engine warning indicator for the following transmission models: 845RE, 8HP45, 850RE, 8HP50, 8HP70, 8HP75, 8HP75-PHEV, 8HP75-LCV, 8HP90, 8HP95. Transmissions may exhibit the following diagnostic codes: P07E4, P1DB2, P0716, P1B14, P0733, P1D90, P1DB7, P1B13.
Associated Products (122)2026 Alfa Romeo Stelvio2026 Dodge Durango2026 Jeep Grand Cherokee2026 Jeep Grand Cherokee L2026 Jeep Grand Wagoneer2026 Jeep Wagoneer2026 Jeep Wrangler2026 Ram 15002026 Ram 25002026 Ram 35002025 Alfa Romeo Stelvio2025 Dodge Durango2025 Jeep Grand Cherokee2025 Jeep Grand Cherokee L2025 Jeep Grand Wagoneer2025 Jeep Wagoneer2025 Jeep Wrangler2025 Ram 15002025 Ram 25002025 Ram 3500+ 102 moreAssociated Documents - March 9, 2026•Document ID: 11030137Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- S2603000002
- Date Added:
- March 18, 2026
- Manufacturer:
- JEEP
SummaryGrease is purging from the differential seal.
Associated Products (7)Associated Documents - March 7, 2026•Document ID: 11030010Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-104-26
- Date Added:
- March 13, 2026
- Manufacturer:
- DODGE
SummaryRSU With Additional Sleep Cycles for HV Battery Integrity Check Customers may comment on one or more of the following: SYMPTOM: ● 12 volt battery lamp on the Instrument Panel Cluster (IPC) illuminated due to depleted 12 volt battery. ● Unable to charge at High Voltage Charging station at Level-1, Level-2 or DC Fast Charge. This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine.
Associated Products (1)Associated Documents - March 7, 2026•Document ID: 11030009Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-103-26
- Date Added:
- March 13, 2026
- Manufacturer:
- DODGE
SummaryFlash: Integrated Dual Charging Module (IDCM) Updates 6A3 Customers may comment on one or more of the following: SYMPTOM: ● 12 volt battery lamp on the Instrument Panel Cluster (IPC) illuminated due to depleted 12 volt battery. ● Unable to charge at High Voltage Charging station at Level-1, Level-2 or DC Fast Charge. This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine.
Associated Products (1)Associated Documents - March 7, 2026•Document ID: 11030008Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-102-26
- Date Added:
- March 13, 2026
- Manufacturer:
- DODGE
SummaryFlash: Integrated Dual Charging Module (IDCM) Updates 11B3 Customers may comment on one or more of the following: SYMPTOM: ● 12 volt battery lamp on the Instrument Panel Cluster (IPC) illuminated due to depleted 12 volt battery. ● Unable to charge at High Voltage Charging station at Level-1, Level-2 or DC Fast Charge. This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine.
Associated Products (1)Associated Documents - March 7, 2026•Document ID: 11030007Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-101-26
- Date Added:
- March 13, 2026
- Manufacturer:
- DODGE
SummaryRSU With Additional Sleep Cycles for HV Battery Integrity Check Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P1E18-00 - Internal Control Module Electronic Park Performance. ● P1625-00 - Park Pawl System Failure. ● P0A78-00 - Drive Motor A Inverter Performance. ● P0A79-00 - Drive Motor B Inverter Performance. ● P1626-00 - Park Pawl Motor Stuck. Customers may also comment on one or more of the following symptoms: ● Vehicle will not power down causing a 12V battery drain. ● Vehicle does not start. ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park. This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine.
Associated Products (1)Associated Documents - March 7, 2026•Document ID: 11030006Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-100-26
- Date Added:
- March 13, 2026
- Manufacturer:
- DODGE
SummaryRSU With Additional Sleep Cycles for HV Battery Integrity Check Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): ● P1E18-00 - Internal Control Module Electronic Park Performance. ● P1625-00 - Park Pawl System Failure. ● P0A78-00 - Drive Motor A Inverter Performance. ● P0A79-00 - Drive Motor B Inverter Performance. ● P1626-00 - Park Pawl Motor Stuck. The customer may comment on one or more of the following symptoms: ● Vehicle will not power down causing a 12V battery drain. ● Vehicle does not start. ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park. This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine.
Associated Products (1)Associated Documents - March 7, 2026•Document ID: 11030005Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-099-26
- Date Added:
- March 13, 2026
- Manufacturer:
- DODGE
SummaryRSU With Additional Sleep Cycles for HV Battery Integrity Check Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● B12B4-00 - Charge Status Indicator Module Internal. ● C10FA-00 - Wheel Hub disconnect Actuator Performance Left. ● C10FB-00 - Wheel Hub disconnect Actuator Performance Right. ● C10F8-00 - Left Front Wheel Hub Disconnect Actuator Position Sensor Circuit Range/Performance. ● C10F9-00 - Right Front Wheel Hub Disconnect Actuator Position Sensor Circuit Range/Performance. ● P061B-00 - Internal Control Module Torque Calculation Performance. Customers may also comment on one or more of the following: ● Loss of communication between EVCU and the Battery Pack Control Module (BPCM) can prevent high- voltage contactors from closing, resulting in a no-start condition. ● Remote start functionality fails when the vehicle is actively charging. ● "Charge Now" feature in application has multiple issues. Feature intermittently fails and does not close contactors, sometimes starts but charge port indicator lights are not commanded by EVCU and sets DTC B12B4-00. ● Closed loop 12V silent charging which can help mitigate a 12V drain issue on the vehicle. ● Drive-by-brake improvements and a resolved issue where the vehicle incorrectly enters turtle mode while driving. ● Powershot sometimes stuck at 0 seconds remaining which makes customer believe that Powershot is not working. ● Wheel End Disconnect closure at zero speed in case of miss at normal close speed. ● Drive-by-brake message update to Instrument Panel Cluster (IPC) in case of Limp Home mode. ● Vehicle will not start due to depleted 12v battery. ● Improvements to minimize occurrences of Limp Home Mode (Turtle Mode). ● IPC, radio range and charge time estimations and messages are not correct. ● Battery range incorrect. ● Improved battery State of Charge (SoC) accuracy in off-nominal conditions.
Associated Products (1)Associated Documents - March 7, 2026•Document ID: 11030004Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-097-26
- Date Added:
- March 13, 2026
- Manufacturer:
- DODGE
SummaryFlash: Motor Control Processor A (MCP A) Updates 6B3 Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P1E18-00 - Internal Control Module Electronic Park Performance. ● P1625-00 - Park Pawl System Failure. ● P0A78-00 - Drive Motor A Inverter Performance. ● P0A79-00 - Drive Motor B Inverter Performance. ● P1626-00 - Park Pawl Motor Stuck. The customer may comment on one or more of the following symptoms: ● Vehicle not shutting off and a draining 12V battery. ● Vehicle no start. ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park. This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine.
Associated Products (1)Associated Documents - March 7, 2026•Document ID: 11030003Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-096-26
- Date Added:
- March 13, 2026
- Manufacturer:
- DODGE
SummaryFlash: Motor Control Processor B (MCP B) Updates 6B3 Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P1E18-00 - Internal Control Module Electronic Park Performance. ● P1625-00 - Park Pawl System Failure. ● P0A78-00 - Drive Motor A Inverter Performance. ● P0A79-00 - Drive Motor B Inverter Performance. ● P1626-00 - Park Pawl Motor Stuck. The customer may comment on one or more of the following symptoms: ● Vehicle not shutting off and a draining 12V battery. ● Vehicle no start. ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park. This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine.
Associated Products (1)Associated Documents - March 7, 2026•Document ID: 11030002Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-095-26
- Date Added:
- March 13, 2026
- Manufacturer:
- DODGE
SummaryFlash: Electronic Vehicle Control Unit (EVCU) Updates 6B3 Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● C10FA-00 - Wheel Hub disconnect Actuator Performance Left. ● C10FB-00 - Wheel Hub disconnect Actuator Performance Right. ● C10F8-00 - Left Front Wheel Hub Disconnect Actuator Position Sensor Circuit Range/Performance. ● C10F9-00 - Right Front Wheel Hub Disconnect Actuator Position Sensor Circuit Range/Performance. ● P061B-00 - Internal Control Module Torque Calculation Performance. Customers may also comment on one or more of the following: ● Will not be able to start the vehicle. ● 12V battery dead resulting in no start. ● Loss of communication between EVCU and BPCM can prevent high-voltage contactors from closing, resulting in a no-start condition. ● Powershot sometimes stuck at 0 seconds remaining which makes customer believe that Powershot is not working. ● Remote start functionality fails when the vehicle is actively charging "Charge Now" feature in app - multiple issues. ● Sometimes fails and does not close contactors, sometimes starts but CPIM lights are not commanded by EVCU and sets B12B4. ● WED closure at zero speed in case of miss at normal close speed. ● Drive-by-brake HMI message update to IPC in case of Limp Home mode. ● DTC U0594 setting after pedal learn (applicable only for plant). ● Instrument Panel Cluster (IPC), radio range and charge time estimations and messages are not correct. ● Battery range incorrect. ● Improved battery State of Charge (SoC) accuracy in off-nominal conditions. ● Battery heating values incorrect on radio when on Performance Pages display. ● Charging does not start when plugged in. ● Charging is not indicating when battery is at full charge. ● Charging slow or takes too long. ● Bumps and jerks while accelerating or decelerating. ● Wrench icon is illuminated on the IPC. ● Turtle icon is illumina
Associated Products (1)Associated Documents - March 7, 2026•Document ID: 11030001Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-094-26
- Date Added:
- March 13, 2026
- Manufacturer:
- DODGE
SummaryFlash: Battery Pack Control Module (BPCM) Updates 6B3 Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may SYMPTOM: exhibit/set one or more the following Diagnostic Trouble Codes (DTCs): ● P0AA7-00 - Hybrid/EV Battery Pack "A" Voltage Isolation Sensor. ● P1614-00 - ECU Reset/Recovery Occurred. ● B1A8A-00 - Multi-Module VIN Handshake Failure. ● P1CDB-00 - Hybrid/EV Wakeup Control 1 Output Circuit Short To Battery. ● P1E25-00 - EV Battery Failure Level 2. ● P0D10-00 - Hybrid/EV Battery Negative Contactor A Stuck Open. ● P0D09-00 - Hybrid/EV Battery Positive Contactor A Stuck Open. ● P0DE6-00 - Hybrid/EV Battery Pack Cell Voltage Low. NOTE: Active or stored. ● P1DAF - Incompatible Limp In Action Requested. NOTE: Active or stored. ● P1CDE-00 – Hybrid/EV Wakeup Control 2 Output Circuit Short to Ground. ● P1CDA-00 – Hybrid/EV Wakeup Control 1 Output Circuit/Open. ● U00C6-00 – Lost Communication With AIR Pressure Sensor. ● P0F00-00 - Hybrid/EV Battery Module 1 Performance. ● P0F01-00 - Hybrid/EV Battery Module 2 Performance. ● P0F02-00 - Hybrid/EV Battery Module 3 Performance. ● P0F03-00 - Hybrid/EV Battery Module 4 Performance. ● P0F04-00 - Hybrid/EV Battery Module 5 Performance. ● P0F05-00 - Hybrid/EV Battery Module 6 Performance. ● P0F06-00 - Hybrid/EV Battery Module 7 Performance. ● P0F07-00 - Hybrid/EV Battery Module 8 Performance. ● P0F08-00 - Hybrid/EV Battery Module 9 Performance. ● P0F09-00 - Hybrid/EV Battery Module 10 Performance. ● P0F0A-00 - Hybrid/EV Battery Module 11 Performance. ● P0F0B-00 - Hybrid/EV Battery Module 12 Performance. ● P0F0C-00 - Hybrid/EV Battery Module 13 Performance. ● P0CA6-00 - Hybrid/EV Battery Charging Current High. B08 FSAR-RSU-7111 -2- NOTE: If the following DTCs are present/active in the BPCM, Battery Pack replacement will be required. Guided Diagnostics will prompt you for the repair action if the diagnostic is present on the vehicle. ● P0ADB-00 - Hybrid/EV Battery Positive Contractor A Contr
Associated Products (1)Associated Documents - March 7, 2026•Document ID: 11030000Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-093-26
- Date Added:
- March 13, 2026
- Manufacturer:
- DODGE
SummaryFlash: Motor Control Processor A (MCP A) Updates 11B3 Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set **one or more of the following Diagnostic Trouble Codes (DTCs)**: ● P1E18-00 - Internal Control Module Electronic Park Performance. ● P1625-00 - Park Pawl System Failure. ● P0A78-00 - Drive Motor A Inverter Performance. ● P0A79-00 - Drive Motor B Inverter Performance. ● P1626-00 - Park Pawl Motor Stuck. The customer may comment on one or more of the following symptoms: ● Vehicle does not start. ● Vehicle will not power down causing a 12V battery drain. ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park. This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine.
Associated Products (1)Associated Documents - March 7, 2026•Document ID: 11029999Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-092-26
- Date Added:
- March 13, 2026
- Manufacturer:
- DODGE
SummaryFlash: Motor Control Processor B (MCP B) Updates 11B3 Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set **one or more of the following Diagnostic Trouble Codes (DTCs)**: ● P1E18-00 - Internal Control Module Electronic Park Performance. ● P1625-00 - Park Pawl System Failure. ● P0A78-00 - Drive Motor A Inverter Performance. ● P0A79-00 - Drive Motor B Inverter Performance. ● P1626-00 - Park Pawl Motor Stuck. The customer may comment on one or more of the following symptoms: ● Vehicle will not power down causing a 12V battery drain. ● Vehicle does not start. ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park. This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine.
Associated Products (1)Associated Documents