Chrysler (FCA US, LLC) is recalling certain 2025-2026 Ram 1500 Pickup, Ram 2500 Pickup, Ram 3500 Pickup, Ram 3500 Cab Chassis, Ram 4500 Cab Chassis, and Ram 5500 Cab Chassis vehicles. A software error may cause the instrument panel display to fail. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standards numbers 102, "Transmission Shift Position Sequence," 105, "Hydraulic and Electric Brake Systems," 108, "Lamps, Reflective Devices, and Associated Equipment," 126, "Electronic Stability Control Systems for Light Vehicles," 135, "Light Vehicle Brake Systems," 138, "Tire Pressure Monitoring System," and/or 208, "Occupant Crash Protection."
Chrysler (FCA US, LLC) is recalling certain 2024-2026 Jeep Wagoneer S, 2025-2026 Ram 1500 Pickup, Ram 2500 Pickup, Ram 3500 Pickup, Ram 3500 Cab Chassis, Ram 4500 Cab Chassis, Ram 5500 Cab Chassis, and 2026 Jeep Cherokee vehicles. Due to an improperly designed trailer tow module, the trailer lights may fail to illuminate and the trailer brakes may fail.
Chrysler (FCA US, LLC) is recalling certain 2025 Ram 2500 Pickup, 3500 Pickup, 3500 Cab Chassis, 4500 Cab Chassis, and 5500 Cab Chassis trucks. A software error in the occupant restraint controller module may cause the driver's side air bag and/or seat belt pretensioner not to deploy in a crash and disable the electronic stability control (ESC) system. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 208, "Occupant Crash Protection" and 126, "Electronic Stability Control Systems."
Chrysler (FCA US, LLC) is recalling certain 2025-2026 Ram 1500 Pickup, Ram 2500 Pickup, Ram 3500 Pickup, Ram 3500 Cab Chassis, 4500 Ram Cab Chassis, and Ram 5500 Cab Chassis vehicles. A software error may cause the instrument panel cluster display to be blank. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 135, "Light Vehicle Brake Systems," 105, "Hydraulic and Electric Brake Systems," and 102, "Transmission shift lever sequence, starter interlock, and transmission braking effect."
Chrysler (FCA US, LLC) is recalling certain Ram 2500 and Ram 3500 vehicles equipped with a 3.5" cluster and column shifter. A software error may cause the gear selection display to be inaccurate. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 101, "Control and Displays."
All of my dash board light lit up. I stop the truck turn it off. when I get back in to drive it would not engage the transmission. No reverse No drive and the engine would not shut off. Happened about two weeks ago. the first time what in December, Same problem! they say it just needed a software flash, but if that was the case why would it happen again, and why would they need another software flash ?
No injuries · No fire · No crash
Upon start up of the vehicle multiple warning codes appear; ABS turned off, 4 wheel drive temporarily disabled, Stability turned off, front and rear parking sensors disabled, Cruise Control disabled (in all forms). If vehicle is put into drive, or issue happens when the vehicle is already in drive; Unable to detect selected gear (switching from Drive/Reverse into Park) which results in not being able to turn the vehicle off.
No injuries · No fire · No crash
The contact owns a 2025 Ram 3500. The contact stated that shortly after purchasing the vehicle brand new and filling the fuel tank on December 3, 2025, the DEF depth gauge failed. The vehicle was taken to a dealer, where the module was reprogrammed and the physical gauge was replaced. However, the contact obtained internal service notes revealing that the urea pump, the DEF tank, the urea tank wiring harness, the DEF injector, and the fluid had actually been replaced due to an active fuel leak within the DEF system. On March 31, 2026, the vehicle was taken back to the dealer to address a malfunctioning digital rearview mirror. While at the dealer, a recall repair was performed under NHTSA Campaign Number: 25V882000 (Air Bags, Electronic Stability Control (ESC)). The digital mirror was replaced; however, the failure recurred immediately. In May 2026, the vehicle was returned to the dealer for the ongoing mirror issue; however, the service notes only indicated that a part adjustment was performed, and the defect persisted. The contact then took the vehicle to a second dealer to repair the digital mirror and address the DEF system, as the warning light had re-illuminated on the instrument panel. During this visit, the second dealer performed a recall repair under NHTSA Campaign Number: 26V059000 (Exterior Lighting, Electrical System). While the dealer claimed to have serviced both the DEF warning light and the mirror, the mirror failure remained unresolved. After spending a cumulative month at the dealer, the vehicle was diagnosed with an illuminated check engine light caused by a recurring DEF-contaminated fuel leak. The dealer replaced the entire DEF assembly, including the fuel system components, and cleared the DTCs. In July 2026, the vehicle was returned to the dealer yet again for another digital mirror replacement, which failed to resolve the issue. The contact believed there was an inherent manufacturing flaw at the top of the fuel tank causing the repeated DEF system failures. The vehicle was not repaired.
No injuries · No fire · No crash
When driving the Anti lock brakes, cruise control, front and rear collision warning system, automatic emergency breaking system and lane keeping system are disabled. All of these alerts are displayed on the display cluster. All of these systems are disabled at the same time. I was told by the dealership that this is caused by a faulty Wheel Speed Sensor. The Wheel Speed Sensors have been replaced 3 times and have not fixed this problem. This has happened when towing a 14,000lbs trailer and the stability of the truck and load are compromised when breaking with a load.
No injuries · No fire · No crash
I have been submitting reports to you for several months with no resolution. The truck yet again experienced the same problem, twice, within 1 week. It would start but then claim that it couldn't detect what gear it was in and said "can't shut off until transmission is in park". After cutting electrical power to get it to shut off, it would not start. After getting it started, it would not go into gear. Once I got the engine running and transmission to go into gear, it no longer had ABS.
No injuries · No fire · No crash