Ford Bronco Service Bulletins (2022)
274 manufacturer communications on file.
- November 28, 2025•Document ID: 11025876Service Bulletin/Repair InstructionsSUSPENSION; ELECTRICAL SYSTEM
- Mfr Comm. #:
- TSB 25-2575
- Date Added:
- December 2, 2025
- Manufacturer:
- FORD
SummaryThis article supersedes TSB 24-2104 to update the vehicle model years affected. Some vehicles listed in the Model statement above may exhibit a "Sta-bar Disconnect Service Required" message in the instrument panel cluster (IPC) and an illuminated warning light with any of the following diagnostic trouble codes (DTCs) stored in the chassis control module (CHCM): C103A, C1A99, C1B03, C1B07, C1B14 and/or B1A67. This may be due to water intrusion in the stabilizer bar wiring harness connector.
Associated Products (5)Associated Documents - November 18, 2025•Document ID: 11025827Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- TSB 25-2551
- Date Added:
- December 1, 2025
- Manufacturer:
- FORD
SummarySome of the vehicles listed in the model statement above may exhibit paint wearing along on the top inner edge of the tailgate where the rear window weather strip contacts the tailgate. This may be due to the accumulation of dirt between the rear window seal and tailgate.
Associated Products (5)Associated Documents - November 10, 2025•Document ID: 11025491Service Bulletin/Repair InstructionsSERVICE BRAKES; ELECTRICAL SYSTEM; UNKNOWN OR OTHER
- Mfr Comm. #:
- SSM 54362
- Date Added:
- November 12, 2025
- Manufacturer:
- FORD
SummarySome 2021-2025 Bronco vehicles may exhibit an illuminated red brake warning indicator with diagnostic trouble code (DTC) C0049:01 stored in the anti-lock brake system (ABS) module. Replace the brake fluid reservoir and the brake fluid level sensor electrical connector. Do not disconnect the brake fluid level sensor electrical connector, cut the connector 3-4 inches (75-100 mm) from the connector end and leave the brake fluid level sensor electrical connector attached to brake fluid reservoir. Include these parts in the same package when returning warranty replacement brake fluid reservoirs. The brake fluid reservoir with the electrical connector still connected should be packaged in the original box to protect it during shipping. For claiming, use causal part 2L210 and labor operations 2140A and 2219D45WR.
Associated Products (5)Associated Documents - October 21, 2025•Document ID: 11024526Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; LANE DEPARTURE: BLIND SPOT DETECTION
- Mfr Comm. #:
- SSM 54313
- Date Added:
- October 28, 2025
- Manufacturer:
- LINCOLN
SummarySome 2020-2025 various Ford and Lincoln vehicles equipped with blind spot information system (BLIS) may experience an inoperative blind spot monitoring with a "Blind Spot System Fault" message displayed in the instrument panel cluster (IPC). This may also be accompanied by diagnostic trouble codes (DTCs) B118C:11 and/or B118C:15 stored in the driver door module (DDM), and/or B118D:11 and/or B118D:15 stored in the passenger door module (PDM). This may be due to the wiring connector from the mirror to the BLIS module. If diagnostics lead to an internal mirror wiring harness fault, a new lower level BLIS light pigtail is now released for service. It is not necessary to replace the exterior mirror assembly. Use part number SC3Z-14A411-B to resolve the concern.
Associated Products (62)2025 Ford Bronco2025 Ford Bronco Sport2025 Ford Escape2025 Ford Expedition2025 Ford Explorer2025 Ford F-1502025 Ford Mustang2025 Ford Transit2025 Lincoln Aviator2025 Lincoln Corsair2025 Lincoln Navigator2024 Ford Bronco2024 Ford Bronco Sport2024 Ford Edge2024 Ford Escape2024 Ford Expedition2024 Ford Explorer2024 Ford F-1502024 Ford Mustang2024 Ford Transit+ 42 moreAssociated Documents - October 7, 2025•Document ID: 11024271Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- SSM 54275
- Date Added:
- October 14, 2025
- Manufacturer:
- FORD
SummarySome 2021-2023 Explorer vehicles equipped with a 3.0L EcoBoost engine, 2021-2023 Aviator vehicles equipped with a 3.0L EcoBoost or 3.0L plug-in hybrid electric vehicle (PHEV) engine, 2021-2023 Edge/Nautilus vehicles equipped with a 2.7L EcoBoost, 2021-2024 F-150 vehicles equipped with a 2.7L EcoBoost, and 2021-2024 Bronco and 2024 Ranger vehicles equipped with a 2.7L or 3.0L EcoBoost engine may exhibit a ticking/tapping or rattle type noise from the top front cover area of the engine. This noise may occur on initial start-up after a cold soak of 6 hours or more that may last for 2-5 seconds. This may be due to an internal component of the variable cam timing (VCT) unit. Workshop Manual (WSM), Section 303-00 > Diagnosis and Testing > Engine > Pinpoint Test F has been updated to include additional steps along with a video to identify the affected VCT unit that requires replacement.
Associated Products (21)2024 Ford Bronco2024 Ford F-1502024 Ford Ranger2023 Ford Bronco2023 Ford Edge2023 Ford Explorer2023 Ford F-1502023 Lincoln Aviator2023 Lincoln Nautilus2022 Ford Bronco2022 Ford Edge2022 Ford Explorer2022 Ford F-1502022 Lincoln Aviator2022 Lincoln Nautilus2021 Ford Bronco2021 Ford Edge2021 Ford Explorer2021 Ford F-1502021 Lincoln Aviator+ 1 moreAssociated Documents - September 24, 2025•Document ID: 11023548Service Bulletin/Repair InstructionsUNKNOWN OR OTHER; STRUCTURE:BODY
- Mfr Comm. #:
- TSB 25-2453
- Date Added:
- October 2, 2025
- Manufacturer:
- FORD
SummaryThis article supersedes TSB 24-2269 to add 2025 model year vehicles. Some of the vehicles listed in the Model statement above may exhibit the driver or passenger side upper rail front trim panel with a warped or misaligned appearance.
Associated Products (5)Associated Documents - September 22, 2025•Document ID: 11023299Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- TSB 25-2439
- Date Added:
- September 23, 2025
- Manufacturer:
- FORD
SummaryThis article supersedes TSB 23-2229 to update the labor times from M-time to M-Time with a limit. Some of the vehicles listed in the Model Statement may exhibit soft top exterior wear on the sides of the soft top material above the B-pillar. This may be due to contact and rubbing between the soft top frame and soft top material.
Associated Products (2)Associated Documents - September 16, 2025•Document ID: 11023297Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- TSB 25-2433
- Date Added:
- September 23, 2025
- Manufacturer:
- FORD
SummaryS+A42:H67me of the vehicles listed in the Model statement above may exhibit the hard top center panel's quarter turn latches come loose while driving.
Associated Products (5)Associated Documents - August 25, 2025•Document ID: 11022354OtherUNKNOWN OR OTHER; ENGINE
- Mfr Comm. #:
- 24N12 -S1
- Date Added:
- September 2, 2025
- Manufacturer:
- FORD
SummaryNEW VEHICLE DEMONSTRATION / DELIVERY HOLD Safety Recall 24S55 – Supplement #1 Dated: August 15, 2025 Customer Satisfaction Program 24N12 Dated June 19, 2025 New! REASON FOR THIS SUPPLEMENT • Rental Vehicles: Added specification that long block replacement must be approved by SSSC for rental coverage to apply. • Labor Allowances: Added labor operation for photo submission on all vehicles and labor operation for borescope inspection. • SSSC Approval: Borescope photo submission required for long block approval. • Parts Handling Allowance: Added additional allowance claiming information for engine replacement. • Attachments: Technical Instructions have been added to the program. PROGRAM TERMS This program provides a no-cost, one-time repair (if needed) for an engine long block replacement for vehicles that completed the 24S55 inspection process. This program will be in effect for 10 years of service or 150,000 miles from the warranty start date of the vehicle, whichever occurs first. This is
Associated Products (12)Associated Documents - August 13, 2025•Document ID: 11021974Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- TSB 25-2325
- Date Added:
- August 19, 2025
- Manufacturer:
- FORD
SummarySome of the vehicles listed in the Model statement above may exhibit an air register that is broken or loose. This may be due to the register barrel detaching from the register assembly. Removal of the instrument panel is no longer required.
Associated Products (5)Associated Documents - August 4, 2025•Document ID: 11022054Over The AirUNKNOWN OR OTHER
- Mfr Comm. #:
- PCM-25.7.3 Bronco
- Date Added:
- August 21, 2025
- Manufacturer:
- FORD
Summary"Quality improvements include: -On-Board Diagnostics calibration for an enhanced Intake air temperature sensor performance"
Associated Products (1)Associated Documents - July 29, 2025•Document ID: 11021358Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 54090
- Date Added:
- August 4, 2025
- Manufacturer:
- FORD
SummarySome 2021-2025 Ford and Lincoln vehicles equipped with SYNC4/Digital Experience may exhibit an unsuccessful telematics control unit module (TCU) software update or software activation during a universal serial bus (USB) update. This may be due to the vehicle connectivity setting being disabled.
Associated Products (45)2025 Ford Bronco2025 Ford Bronco Sport2025 Ford Escape2025 Ford Expedition2025 Ford Explorer2025 Ford F-1502025 Ford Maverick2025 Ford Mustang2025 Ford Ranger2025 Ford Transit2025 Lincoln Aviator2025 Lincoln Corsair2025 Lincoln Nautilus2025 Lincoln Navigator2024 Ford Bronco2024 Ford Edge2024 Ford Escape2024 Ford Expedition2024 Ford F-1502024 Ford Mustang+ 25 moreAssociated Documents - July 4, 2025•Document ID: 11020410Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- SSM 54016
- Date Added:
- July 8, 2025
- Manufacturer:
- FORD
SummarySome 2021-2025 Bronco and 2024-2025 Ranger vehicles equipped with a 2.7L/3.0L EcoBoost engine may require removal of the engine front cover due to various concerns. Workshop Manual, Section 303-01 has been updated with improved engine front cover removal and installation service procedure steps including a new body removal and install step.
Associated Products (7)Associated Documents - July 1, 2025•Document ID: 11021365Over The AirELECTRICAL SYSTEM
- Mfr Comm. #:
- 22-PU1010-MIL-LT Bronco
- Date Added:
- August 4, 2025
- Manufacturer:
- FORD
SummarySoftware Update: Quality improvements include: -Addresses incorrectly triggered warning lights when doors are removed -Addresses an erroneous DTC caused by the Electronic Brake Booster (EBB) in cold climate
Associated Products (2)Associated Documents - June 25, 2025•Document ID: 11020052Service Bulletin/Repair InstructionsSTRUCTURE:BODY; VISIBILITY/WIPER
- Mfr Comm. #:
- SSM 53981
- Date Added:
- July 2, 2025
- Manufacturer:
- FORD
SummarySome 2021-2024 Bronco vehicles may exhibit a rattle from the front windows with the windows placed in the partially down position and driving over rough roads and/or bumps. This may be due to the interface between the window glass and the body mounted glass run. To correct this condition, replace the body mounted glass runs using the body mounted glass run kit (3 door: M2DZ-9821597-E, and 5 door: M2DZ-7821597-F) which contains updated seals for improved sealing performance. For claiming, use causal part 9821597/7821597 and labor operations 23943A and 23943A19 in Section 12 of the Service Labor Time Standards (SLTS) Manual.
Associated Products (4)Associated Documents - June 25, 2025•Document ID: 11020044Service Bulletin/Repair InstructionsENGINE; POWER TRAIN
- Mfr Comm. #:
- SSM 53973
- Date Added:
- July 2, 2025
- Manufacturer:
- LINCOLN
SummarySome 2021-2024 Edge/Nautilus, 2021-2025 Bronco/Bronco Sport/E-Series/Escape/Corsair/Expedition/Navigator/Explorer/Aviator/F-150/F-Super Duty/Mustang/Ranger, and 2022-2025 Maverick vehicles may require an A/C compressor clutch assembly replacement be performed for various concerns. Workshop Manual (WSM), Section 412-00 Removal and Installation has been updated to eliminate the need to remove and install the A/C compressor to change out the A/C Compressor clutch assembly.
Associated Products (76)2025 Ford Bronco2025 Ford Bronco Sport2025 Ford E-3502025 Ford E-4502025 Ford Escape2025 Ford Expedition2025 Ford Explorer2025 Ford F-1502025 Ford Maverick2025 Ford Mustang2025 Ford Ranger2025 Lincoln Aviator2025 Lincoln Corsair2024 Ford Bronco2024 Ford Bronco Sport2024 Ford E-3502024 Ford E-4502024 Ford Edge2024 Ford Escape2024 Ford Expedition+ 56 moreAssociated Documents - June 20, 2025•Document ID: 11019702Service Bulletin/Repair InstructionsUNKNOWN OR OTHER; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 53966
- Date Added:
- June 24, 2025
- Manufacturer:
- LINCOLN
SummarySome 2021-2025 Ford/ Lincoln vehicles equipped with SYNC4 may not be able to perform an update to the accessory protocol interface module (APIM). This may be due to the software in the APIM. Ford Engineering has de-activated the ability to update these SYNC4 APIM modules as applicable, and the Ford Diagnosis and Repair System (FDRS) will not present an update for the APIM module. Some existing directed repairs may be impacted, check Professional Technician System (PTS) before attempting any specific technical service bulletin (TSB)/special service message (SSM) and check field service action (FSA) landing pages before attempting any FSA repairs. For any vehicle repairs requiring a software update that includes an APIM update in the programming sequence, if the 5-digit product code for the APIM software is equal to or lower than 23187, do not attempt to update affected modules at this time. To determine the 5-digit product code for the APIM software on the vehicle, while the vehicle center display screen is powered up with ignition in run or accessory, go to Settings > General > About SYNC.
Associated Products (31)2025 Lincoln Navigator2024 Ford Escape2024 Ford Expedition2024 Ford Mustang2024 Ford Transit2023 Ford Bronco2023 Ford Edge2023 Ford Escape2023 Ford Expedition2023 Ford F-1502023 Ford Transit2023 Lincoln Corsair2023 Lincoln Nautilus2023 Lincoln Navigator2022 Ford Bronco2022 Ford Edge2022 Ford Expedition2022 Ford Explorer2022 Ford F-1502022 Ford F-250+ 11 moreAssociated Documents - June 20, 2025•Document ID: 11019701Service Bulletin/Repair InstructionsSTRUCTURE:BODY; VISIBILITY/WIPER
- Mfr Comm. #:
- SSM 53962
- Date Added:
- June 24, 2025
- Manufacturer:
- FORD
SummarySome 2021-2025 Bronco vehicles may exhibit a water leak from the A-pillar, overhead console/upfitter switches and/or sun visors. If a leak is identified from this area, refer to Workshop Manual (WSM), Section 501-18 Pinpoint Test (PPT) G for water leak diagnosis. If the PPT leads to the replacement of the header seal, a revised header seal has been released for service (M2DZ-7803110-H) which contains a thicker consistent bead of butyl across the entire length of the seal. The header seal will need to be firmly depressed and massaged to make sure all of the butyl that is across the entire header seal will properly adhere to the body, creating a water-tight seal. For claiming, use causal part 7803110 and labor operation 03110A in Section 12 of the Service Labor Time Standards (SLTS) Manual.
Associated Products (5)Associated Documents - June 19, 2025•Document ID: 11020078OtherENGINE
- Mfr Comm. #:
- 24N12
- Date Added:
- July 2, 2025
- Manufacturer:
- FORD
SummaryCertain 2021 - 2022 Model Year Various Vehicles Engine Valve Inspection Test
Associated Products (12)Associated Documents - June 5, 2025•Document ID: 11019478Service Bulletin/Repair InstructionsWHEELS; SUSPENSION
- Mfr Comm. #:
- SSM 53869
- Date Added:
- June 11, 2025
- Manufacturer:
- FORD
SummarySome 2021-2024 Bronco vehicles built on or before 01-Jan-2025 equipped with a 2.3L EcoBoost engine and 10R60 automatic transmission may exhibit diagnostic trouble codes (DTCs) P0300, P0301, P0302, P0303, and P0304 and may be accompanied by a buck/jerk sensation while driving between 35-55 mph (56-89 km/h) in gears 7-10. If the condition remains after normal engine misfire diagnostics and associated repairs have been performed, the condition may be related to driveline torsional vibration induced by the rear wheels and/or rear axle assembly. The driveline torsional harmonics/vibrations are incorrectly identified by the misfire monitor as an engine misfire. Perform standard road force wheel balancing of all four tire and wheel assemblies and retest. If the condition continues to occur, replace the ring and pinion gearset in the rear axle. For claiming, use causal part 4209 and applicable labor operations found in Section 04 of the Service Labor Time Standards (SLTS) Manual.
Associated Products (4)Associated Documents