Hyundai Kona Service Bulletins
110 manufacturer communications on file.
- April 13, 2023•Document ID: 10235555Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:SENSOR
- Mfr Comm. #:
- 23-01-014H-4
- Date Added:
- May 4, 2023
- Manufacturer:
- HYUNDAI
SummaryHyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993) in response to an increase in thefts of certain Hyundai vehicles not equipped with engine immobilizers targeted through social media. In November 2021, engine immobilizers became standard on all Hyundai vehicles produced.
Associated Products (13)Associated Documents - April 6, 2023•Document ID: 10235341Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; VISIBILITY:POWER WINDOW DEVICES AND CONTROLS
- Mfr Comm. #:
- 23-01-014H-3
- Date Added:
- May 2, 2023
- Manufacturer:
- HYUNDAI
SummaryCertain Hyundai vehicles may not be equipped with an immobilizer. This bulletin provides the service procedure to update the IBU/BCM (Integrated Body Control Unit/Body Control Module), to revise the OEM Hyundai burglar alarm system operation and ignition start logic, and installation of two anti-theft decals for the front windows.
Associated Products (10)Associated Documents - March 21, 2023•Document ID: 10233549Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:SENSOR; ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:KEY/SENDER; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 23-01-014H-2
- Date Added:
- April 4, 2023
- Manufacturer:
- HYUNDAI
SummaryHyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993) in response to an increase in thefts of certain Hyundai vehicles not equipped with engine immobilizers targeted through social media. In November 2021, engine immobilizers became standard on all Hyundai vehicles produced.
Associated Products (4)Associated Documents - March 21, 2023•Document ID: 10233547Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:KEY/SENDER
- Mfr Comm. #:
- 23-01-014H-2
- Date Added:
- April 4, 2023
- Manufacturer:
- HYUNDAI
SummaryCertain Hyundai vehicles may not be equipped with an immobilizer. This bulletin provides the service procedure to update the IBU/BCM (Integrated Body Control Unit/Body Control Module), to revise the OEM Hyundai burglar alarm system operation and ignition start logic, and installation of two anti-theft decals for the front windows.
Associated Products (4)Associated Documents - January 30, 2023•Document ID: 10230904Service Bulletin/Repair InstructionsVISIBILITY
- Mfr Comm. #:
- 23-BD-002H
- Date Added:
- February 2, 2023
- Manufacturer:
- HYUNDAI
SummaryThis bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
Associated Products (36)2026 Hyundai Venue2023 Hyundai Elantra2023 Hyundai Ioniq 52023 Hyundai Kona2023 Hyundai Nexo2023 Hyundai Palisade2023 Hyundai Santa Cruz2023 Hyundai Santa Fe2023 Hyundai Sonata2023 Hyundai Tucson2023 Hyundai Venue2022 Hyundai Accent2022 Hyundai Elantra2022 Hyundai Elantra N2022 Hyundai Ioniq 52022 Hyundai Kona2022 Hyundai Kona N2022 Hyundai Nexo2022 Hyundai Palisade2022 Hyundai Santa Cruz+ 16 moreAssociated Documents - January 26, 2023•Document ID: 10230907Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 23-01-007H
- Date Added:
- February 2, 2023
- Manufacturer:
- HYUNDAI
SummaryCertain 2018-2022MY Kona (OS) vehicles equipped with 2.0L engines and 4WD may exhibit transfer case oil leaks and/or an oil smell caused by the transfer case pinion oil seal overheating. This bulletin describes the procedure to update the 4WD electronic control module (ECU) and to inspect the transfer pinion area for leakage. If a leak is detected, the transfer case pinion oil seal will need to be replaced.
Associated Products (2)Associated Documents - July 28, 2022•Document ID: 10217251Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 22-EM-010H
- Date Added:
- August 5, 2022
- Manufacturer:
- HYUNDAI
SummaryFollow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement.
Associated Products (20)2026 Hyundai Venue2023 Hyundai Elantra2022 Hyundai Accent2022 Hyundai Elantra2022 Hyundai Kona2022 Hyundai Palisade2022 Hyundai Santa Cruz2022 Hyundai Santa Fe2022 Hyundai Sonata2022 Hyundai Tucson2022 Hyundai Venue2021 Hyundai Accent2021 Hyundai Elantra2021 Hyundai Kona2021 Hyundai Palisade2021 Hyundai Santa Fe2021 Hyundai Sonata2021 Hyundai Tucson2021 Hyundai Veloster2021 Hyundai VenueAssociated Documents - July 14, 2022•Document ID: 10217258Service Bulletin/Repair InstructionsTIRES
- Mfr Comm. #:
- 22-GI-006H
- Date Added:
- August 5, 2022
- Manufacturer:
- HYUNDAI
SummaryEffective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before retail sale. This limit is the lesser of 1.5% of GVWR or 100 pounds. If the total added weight exceeds the lesser of the limit, a label must be added to the driver-side B-pillar within 25mm (1 inch) of the original tire placard.
Associated Products (24)2026 Hyundai Venue2023 Hyundai Elantra2023 Hyundai Nexo2022 Hyundai Accent2022 Hyundai Elantra2022 Hyundai Ioniq 52022 Hyundai Kona2022 Hyundai Nexo2022 Hyundai Palisade2022 Hyundai Santa Cruz2022 Hyundai Santa Fe2022 Hyundai Sonata2022 Hyundai Tucson2022 Hyundai Venue2021 Hyundai Accent2021 Hyundai Elantra2021 Hyundai Kona2021 Hyundai Nexo2021 Hyundai Palisade2021 Hyundai Santa Fe+ 4 moreAssociated Documents - July 14, 2022•Document ID: 10217250Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 22-AT-009H
- Date Added:
- August 5, 2022
- Manufacturer:
- HYUNDAI
SummaryIf you are servicing an applicable vehicle with a âCheck Engineâ light on and one or more of the DTC listed on Page 2, follow the repair procedure and perform the diagnosis. If necessary, replace the High Flow electric oil pump (HF EOP) for HF EOP issues or the Dual Clutch Transmission for High Pressure electric oil pump (HP EOP) issues.
Associated Products (9)Associated Documents - June 3, 2022•Document ID: 10215599Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 218/231 amend
- Date Added:
- July 9, 2022
- Manufacturer:
- HYUNDAI
SummaryCertain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing.
Associated Products (8)Associated Documents - May 19, 2022•Document ID: 10213721Service Bulletin/Repair InstructionsEQUIPMENT; POWER TRAIN
- Mfr Comm. #:
- 22-AT-007H
- Date Added:
- June 10, 2022
- Manufacturer:
- HYUNDAI
SummaryCertain vehicles (listed below) equipped with 7-speed Double Clutch Transmissions (DCT) may exhibit abnormal vibration at low speeds. This bulletin outlines the procedures for diagnosing clutch judder, updating the Transmission Control Unit (TCU) with revised logic, and/or replacing the Double Clutch.
Associated Products (1)Associated Documents - May 16, 2022•Document ID: 10213726Service Bulletin/Repair InstructionsSTEERING; WHEELS; TIRES
- Mfr Comm. #:
- 22-ST-007H
- Date Added:
- June 10, 2022
- Manufacturer:
- HYUNDAI
SummaryN Vehicles are designed to maximize dynamic steering performance. In normal Ackerman steering geometry, the inner front tire turns more than the outer tire to help cornering in low-speed situations, i.e., parking lot maneuvering or sharp U-turns. N vehicles have a steering geometry optimized for performance driving. The N vehicleâs steering angle difference between the front wheels is reduced to enhance cornering performance. While this helps in high performance driving conditions, it can cause a higher level of tire side scrub that may create a slow shudder or vibration while turning at full steering lock. The feel is similar to turning a 4WD vehicle on dry asphalt when locked in 4WD. This shudder or vibration at parking lot speeds is normal, and no repairs should be performed.
Associated Products (4)Associated Documents - May 5, 2022•Document ID: 10213724Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 22-EM-008H
- Date Added:
- June 10, 2022
- Manufacturer:
- HYUNDAI
SummaryHyundai is conducting a service campaign 974 to enhance the knock sensor logic with the Cylinder Noise Diagnostic System (CNDS) software update. CNDS is to detect abnormal cylinder wall scuffing or noise of the engine block before potentially severe engine damage occurs. If abnormal noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously. In addition, DTC P1327 will be recorded in the ECM.
Associated Products (2)Associated Documents - May 5, 2022•Document ID: 10213718Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 22-01-043H
- Date Added:
- June 10, 2022
- Manufacturer:
- HYUNDAI
SummaryHyundai is conducting a service campaign to enhance the knock sensor logic with the Cylinder Noise Diagnostic System (CNDS) software update. CNDS is to detect abnormal cylinder wall scuffing or noise of the engine block before potentially severe engine damage occurs. If abnormal noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously. In addition, DTC P1327 will be recorded in the ECM.
Associated Products (2)Associated Documents - April 8, 2022•Document ID: 10211680Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 22-ST-005H
- Date Added:
- May 10, 2022
- Manufacturer:
- HYUNDAI
SummaryCertain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing.
Associated Products (4)Associated Documents - April 8, 2022•Document ID: 10211678Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 22-ST-005H
- Date Added:
- May 10, 2022
- Manufacturer:
- HYUNDAI
SummaryCertain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing.
Associated Products (5)Associated Documents - March 31, 2022•Document ID: 10210210Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 22-01-032H
- Date Added:
- April 8, 2022
- Manufacturer:
- HYUNDAI
SummaryOn certain 2021 Elantra and 2022 Kona vehicles equipped with 2.0L engine, a coolant leak at the Water Temperature Sensor (WTS) may be observed due to machining burrs at the mounting port of the cylinder head, resulting in improper coolant sealing.
Associated Products (2)Associated Documents - January 12, 2022•Document ID: 10207807Service Bulletin/Repair InstructionsPOWER TRAIN; EQUIPMENT
- Mfr Comm. #:
- 22-01-007H
- Date Added:
- February 8, 2022
- Manufacturer:
- HYUNDAI
SummaryCertain vehicles equipped with 7-speed Double Clutch Transmissions (DCT) may exhibit abnormal shifting caused by an out of specification input shaft snap ring. This bulletin outlines the procedures for inspecting for 1-2 or 2-1 shift shock and replacing the input shaft snap ring.
Associated Products (3)Associated Documents - October 1, 2021•Document ID: 10203272Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 21-ST-003H
- Date Added:
- November 6, 2021
- Manufacturer:
- HYUNDAI
SummaryCertain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing
Associated Products (5)Associated Documents - June 7, 2021•Document ID: 10199096Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 21-01-044H
- Date Added:
- July 9, 2021
- Manufacturer:
- HYUNDAI
SummaryThis bulletin provides information related to the ECU (Engine Control Unit) software update for KONA (OS) 2.0L vehicles. This update revises the logic of idle fuel adaptive range to prevent idle combustion instability.
Associated Products (1)Associated Documents