Jeep Wrangler Complaints

18,838 consumer complaints on file.

#11747396June 30, 2026
ELECTRICAL SYSTEM
Nothing has happened. They dont know when they can fix this issue and its a fire issue. The solution now is to park away from buildings, but car theft is high, and break-ins happen all around here, so that in itself is an issue. Should be at a dealer lot waiting for a fix and a loaner should be provided by Jeep.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11747317June 30, 2026
ELECTRICAL SYSTEM, ENGINE, FUEL/PROPULSION SYSTEM
After performing the 68c recall vehicle no longer drives the way it was designed. When in hybrid mode pushing the accelerator to the floor results in a 2-6 second delay waiting for the gas motor to kick in and then it slams the power into the car. This car is extremely unsafe and impossible to merge into the highway correctly now. Car does not show any warnings and dealer claims this is normal operation.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11747157June 29, 2026
SERVICE BRAKES
Had this 2013 Jeep Wrangler since new and has ABS module internal failure code C2200. ABS, ANTI SKID, BRAKE lights are constantly lit on the dashboard. No ABS on this Jeep making it unsafe in an emergency braking situation which could cause a crash. Have tried for over a year and a half to have the ABS repaired or get a new ABS Module. As of today, June 29, 2026, Mopar Parts has again informed us that the ABS Module is unavailable. The Internet has been alive with many Jeep Wrangler owners driving around with no ABS braking. NTSA needs to take action to get this corrected.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11747269June 29, 2026
ELECTRICAL SYSTEM
The contact owns a 2024 Jeep Wrangler 4XE. The vehicle was repaired under NHTSA Campaign Number: 25V741000 (Electrical System); however, while driving at an undisclosed speed, the check engine warning light illuminated, and the message "Electric not Available" was displayed, with the RPM elevated to high. Additionally, there was an abnormal burning odor coming from the engine compartment. The vehicle was taken back to the dealer where it was diagnosed and determined that the heater coolant system needed to be replaced. The vehicle was repaired; however, the failure persisted. The vehicle was taken back to the dealer to be diagnosed; however, the dealer stated that the failure could not be duplicated and that the steering damper needed to be replaced. The vehicle was repaired; however, the failure persisted. The vehicle was taken back to the dealer again, diagnosed, and determined that the turbocharger needed to be replaced. The vehicle was repaired; however, the failure persisted. The manufacturer was notified of the failure. The failure mileage was approximately 32,167.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11747302June 29, 2026
POWER TRAIN, ENGINE
am the original owner of this 2015 Jeep Wrangler, which I purchased new. The vehicle has been properly maintained according to the manufacturer's recommended maintenance schedule. I have records documenting routine maintenance, including regular oil changes. At approximately 75,000 miles, I began hearing a persistent ticking noise from the engine. Because I was concerned that the noise could indicate a mechanical problem, I scheduled an inspection with an authorized Jeep dealership. The dealership diagnosed the vehicle with a failed rocker arm that caused damage to the exhaust camshaft. The dealership advised that the intake camshaft remained in good condition, indicating that the failure was isolated to the exhaust valvetrain at the time of diagnosis. This type of internal engine failure at approximately 80,000 miles was unexpected for a properly maintained vehicle. My concern is that if this condition is not diagnosed promptly, continued operation could result in further engine damage, loss of engine performance, engine misfire, or potential engine failure while the vehicle is being driven, creating a potential safety hazard. While researching this issue after receiving the diagnosis, I found numerous reports from other owners of vehicles equipped with the 3.6L Pentastar engine describing similar rocker arm and camshaft failures across Jeep owner forums, Reddit, Facebook owner groups, and YouTube. Although I understand there has not been a recall for this condition on my vehicle, I believe the number of similar owner reports suggests the issue may warrant further review. I am submitting this complaint so that NHTSA is aware of the issue and can evaluate whether similar failures are occurring with sufficient frequency to justify additional investigation.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11747181June 29, 2026
ELECTRICAL SYSTEM, POWER TRAIN
- The all electric drive system intermittently fails. The vehicle drive shuts down and stops suddenly when decelerating to a stop in full electric mode while in drive. The vehicle "drive" light on the gear shift then starts flashing when the drive system shuts down. Vehicle motors lock up and the vehicle comes to an abrupt stop. The vehicle then has to be shifted into Park, and then back into Drive, in order for it to re-engage. The incidents happened at all different levels of SOC - from 98% charge to 1% charge. All happened at different times of day. Temperatures between 73-85 degrees. All in daylight with different sun/clouds. Yes it is available for inspection upon request. - Safety is an obvious issue when the vehicle comes to a compete and sudden stop in traffic unexpectedly. - Yes the problem has been reproduced and confirmed my an independent automotive engineer. I am an experienced professional automotive test driver/engineer for multiple OEM's. - Not as of this time. It is due for service on Thursday July 2nd for its 78C recall completion. At that time, I will have the dealership inspect it. - There were no warnings of any kind prior to each failure. I have only owned the vehicle for 14 days, and in that time, the issue has repeated 6 times. All when in full electric/battery mode, or, when in hybrid mode but the vehicle was operating solely on electric propulsion and the ICE was not on or engaged.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11747177June 29, 2026
POWER TRAIN, FUEL/PROPULSION SYSTEM, ENGINE
Was traveling approximately 55 MPH down the highway for 15 min in electric mode. Moved to the shoulder and stopped quickly using regenerative braking for an oncoming emergency vehicle. I got back on the highway and I suddenly lost almost all pedal response and it would not accelerate. I kept pushing the accelerator pedal harder and harder. That's when the ICE kicked on and there was a sudden violent lurch forward and the engine was screaming at over 5000 RPM. There were cars approaching behind me and they had to suddenly stop and they honked horns and avoid hitting me. This sudden throttling of the battery/electric and very erratic switch over to ICE is dangerous.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11747138June 29, 2026
STEERING
The contact owns a 2021 Jeep Wrangler. The contact discovered from a news report that the vehicle might be included in NHTSA Campaign Number: 26V363000 (Steering). Upon investigation, the contact discovered that the part to do the recall repair was not yet available. The local dealer was made aware of the issue and confirmed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11747105June 29, 2026
POWER TRAIN, ELECTRICAL SYSTEM
While driving, regardless of whether at neighborhood or highway speeds, my Jeep Wrangler 4xe suddenly loses drive power without warning. Electric propulsion drops in stages — to about 50%, then 25% — then the dash displays "Electric Mode Temporarily Unavailable" and the vehicle forces itself into hybrid mode. When this happens, I press the accelerator and get little or no response for several seconds before the gas engine engages. This is a serious safety hazard when merging or pulling into traffic. I have had a couple of close calls due to the lack of acceleration. It is repeatable and occurs during normal driving. This all began after having the 68C recall performed. Also, while driving in electric mode at highway speeds, the engine constantly starts and stops, causing a lurching each time. In other instances, when the acceleration is lagging, and the engine does start and engage, the vehicle accelerates more than expected, which could be a serious safety risk.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11747098June 29, 2026
POWER TRAIN, VEHICLE SPEED CONTROL
On 6-22-26 at approximately 1035 am, I was traveling southbound on Rte 140 in Taunton. I was in the left lane, traveling at a speed of approximately 55 mph. The Jeep was in Electric Mode. I attempted to accelerate so that I could get around a tanker truck. I pressed down on the accelerator, but my speed only went up to 56 mph before slowly starting to come down. I pressed harder on the accelerator, but my speed continued to drop. There was a vehicle traveling close behind me that was clearly getting aggravated by my slow speed (posted 65mph zone). I came off the accelerator and moved into the right lane. At this point the gas engine finally came on and gave me additional acceleration power.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11747097June 29, 2026
POWER TRAIN, VEHICLE SPEED CONTROL
On [XXX] at approximately [XXX] pm I was at the intersection of [XXX] and [XXX]. When the light turned green I attempted to make a left turn. The Jeep was in E-Save mode, but the gas engine was not on at the time. I stepped on the accelerator, but the vehicle moved very slowly through the turn, no matter how hard I pressed down on the accelerator (electric motor engaged at this time). I feared that I would get struck by other vehicles due to the very slow rate of speed. When I cleared the intersection, the gas motor finally turned on and supplied me with the required amount of acceleration. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11747091June 29, 2026
ENGINE
Water pump failure, with 12,540
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11746997June 28, 2026
FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING, SERVICE BRAKES
XXX lights on dash for abs, brakes, traction came on upon commuting home from [XXX] to [XXX]. I went to Honda Fredericksburg and diagnosis was C2200 failed and the part was on back order. Returned to SC and followed up with Jeep and local automotive services and part back order but able to drive without replacement and still awaiting product. XXX engine light on in addition to the continual abs, brake, traction lights as well as vehicle going into limp mode. Took it immediately to local automotive services shop and received ABS control Module failure is now sending error to other sensors to put Jeep in limp mode and inoperable. OEM Part still on back order and unable to obtain from Jeep. I contacted Mt. Pleasant Jeep dealership service department as well and unable to get the part. No part available and unknown timeframe which leaves me to garage the Jeep while waiting for a new part to become available. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11747080June 28, 2026
ELECTRICAL SYSTEM
While driving down the highway, the instrument cluster flashed a lightning bolt and then went blank and the Jeep stalled. Completely lost power and had to stop on the edge of a busy interstate highway. Upon stopping and putting the Jeep in park and pressing the start button, everything lit up and the vehicle started, then immediately gave me a TPMS sensor failed warning and all pressure readings were blank, it periodically gave me a low pressure warning after that but I manually checked the pressure with a tire gauge and it was within in normal range on all five tires (including spare). After I restarted and drove a bit further, the same thing happened again. I looked at the voltage in the instrument display and what I saw was I am only getting to about 13.3v on start up and when idle (including coasting at highway speed) or stopped and ESS kicks in voltage drops to 12.2. I looked up the VIN on the MOPAR recall site and it shows that recall # 24V-652 has been previously marked as completed.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11747074June 28, 2026
ELECTRICAL SYSTEM
My 2022 Jeep Wrangler Unlimited (VIN [XXX]) has completely lost power and shut down while being driven in moving traffic on three separate occasions, each time without warning. When it shuts down, the vehicle loses engine power and forward motion along with power-assisted braking, power-assisted steering, and hazard lights, and it has to be towed. The first failure occurred on or about XXX, at about 13,000 miles. The vehicle was towed to the dealer, and a bad battery cell and loose transmission control module terminals were addressed under warranty, but no cause for the shutdown was found. The second failure occurred on or about XXX, at about 14,608 miles. The vehicle shut down again in traffic and was towed in, leaving me stranded for over an hour. Replaced both batteries and No cause was found. The third failure occurred on or about XXX, at about 16,913 miles. The vehicle shut down a third time in traffic and was towed in. Both batteries failed testing and were replaced, and a blown 150-amp main fuse was replaced, but again no cause was identified. The vehicle still remains at the dealership and has not been diagnosed or repaired. After three repair attempts over roughly 4,000 miles, the manufacturer has not found or corrected the cause of these repeated electrical shutdowns. Losing all power in moving traffic, with no propulsion and no steering or braking assist, is an extreme safety hazard that could easily cause a crash. There has been no crash, injury, or fire so far, but the defect keeps recurring and the vehicle is still unsafe to rely on and is still at the dealer as no root cause has been found. I am requesting that NHTSA review this dangerous, unresolved defect. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11747065June 28, 2026
ENGINE, ELECTRICAL SYSTEM, UNKNOWN OR OTHER
I went to start my Wrangler 4XE today and had a "Service Charging System" error. The gas part of the Jeep was running, so I proceeded to drive it. I noticed when I came to a stop, the car would not accelerate, then when it did it was violent and bucking. At a stop light it sounded like it was going to stall so I turned it off and then it would not turn back on at all. I finally got it to turn back on and drove it a little further, at one point I went to accelerate and had the pedal all the way to the floor and it would not advance. I brought it to Auto Zone and had a new 12V battery put in, but it did not fix the issue. After a quick search, it seems like this is a common problem with Jeep 4XE High Voltage Battery systems. Jeep has recalled the battery at least 3 times now and I've taken it for the first two recalls already. It was extremely distressing to try to accelerate and it not move, and could have seriously been a safety issue if I continued to drive the car. I was in another state, Jeep has no 24/7 service to call other than roadside assistance, so I had it towed to Brubaker Jeep in Lancaster PA, but I live in Virginia and had to rent a car to get home.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11747005June 28, 2026
ELECTRICAL SYSTEM, ENGINE, UNKNOWN OR OTHER
I own a 2022 4xe, ater the 68c recall the power of the electric drive is limited. Frequent power loss occurs on highway driving during acceleration (merging onto highway or passing other cars). Despite the battery being charged up to 50% there is only 25% power available. The car is a plug in hybrid vehicle. The internal combustion engine starts in these cases with several seconds delay. During that time the vehicle does not accelerate sufficiently to safely merge onto a highway or pass other cars. The power loss happens without warning during critical drive situations like merging onto a highway or passing other cars. The driver expects a continuous level of power by the car, not a sudden power loss. This is reported by countless other drivers on all social media platforms as a consequence of the 68C recall that affects 350 000 Jeep Wrangler 4xe and Grand Cherokee 4xe. Jeep does not respond to customer complaints or requests for clarification. I would like to request all these cases be looked into, and also contacting Jeep for the new parameters put in place to protect the battery, such as battery temperature and power limits put in place to "protect" a hardware issue within a battery with software
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11746998June 28, 2026
POWER TRAIN, ELECTRICAL SYSTEM
While driving, my 2023 Jeep Wrangler 4xe suddenly loses drive power without warning. The car is a plug in hybrid vehicle. The vehicle routinely displays 'Electric Temporarily Unavailable'. When it happens, I press the accelerator and the vehicle does not respond; there is a delay of several seconds with little or no power before the gas engine engages. This is a serious safety hazard — the loss of power is sudden and unpredictable, and the delay leaves me unable to accelerate when merging or pulling into traffic. The condition is reproducible and began after the 68C recall software update. The driver expects a continuous level of power by the car, not a sudden power loss. This is reported by countless other drivers on all social media platforms as a consequence of the 68C recall that affects 350,000 Jeep Wrangler 4xe and Grand Cherokee 4xe. I have taken the vehicle to the dealer multiple times; each visit results in 'no codes found' and 'operating as designed,' and it has not been repaired. Jeep does not respond to customer complaints or requests for clarification.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11746959June 27, 2026
STEERING, ELECTRICAL SYSTEM, UNKNOWN OR OTHER
On 06/20/2026, the same day I leased this new 2026 Jeep Wrangler Unlimited Rubicon, at 29 miles it displayed a "Power Steering System Hot - Performance May Be Limited" warning followed by an "Electric Power Steering Fail" warning. The Jeep mobile app and an email from Jeep Service both logged an Electric Power Steering failure that day and stated continued operation with reduced steering assist could pose a safety risk and to contact a dealer as soon as possible. The failed system is the electric power steering; the vehicle is available for inspection on request. On 06/23/2026 the selling dealer confirmed the problem by factory scan, recording stored fault codes in the electric power steering module (C2129-16) and related steering/cluster modules (B11C1-13 and U1464-00), plus numerous low/under-voltage codes, with system voltage as low as ~7.4V. The dealer characterized it only as "low battery voltage," reported no problem found, and performed no repair; their only action was to charge the 12V battery by driving, and the power steering connector was not inspected or replaced. The same "Power Steering System Hot" warning reappeared within about 10 minutes of leaving the dealer after that visit, which I documented on video, confirming the problem was not resolved. The manufacturer has not yet inspected the vehicle. These symptoms match Recall 26V363 and NHTSA investigation PE24024 concerning the electric hydraulic power steering pump connector overheating and causing fires, including while parked and off. This vehicle is a 2026, which appears to fall outside the currently published recall years (2021-2025); I am reporting it so a model-year 2026 incident is on record. The safety risks are loss of steering assist while driving and potential fire, including while parked and off. I park in a shared garage. No crash, fire, or injury has occurred... yet.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0
#11746630June 26, 2026
SERVICE BRAKES
Brake, abs and traction dash lights come on permanently. Code pulled is C2200, abs internal failure. Replacement or repair parts unavailable due to manufacturer hold due to engineering issues. Can’t drive due to NC safety inspection fail.
Crash:
No
Fire:
No
Injuries:
0
Deaths:
0

← Back to Jeep Wrangler