Ford F-150 Service Bulletins (2021)
634 manufacturer communications on file.
- January 30, 2024•Document ID: 10249776Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- SSM 52218
- Date Added:
- February 6, 2024
- Manufacturer:
- FORD
SummarySome 2021-2023 F-150 non-Lightning vehicles may exhibit reduced power and/or lack of acceleration above 4000 revolutions per minute (RPM) and/or not being able to shift above 4000 RPM. This may be due to the missing retainers (service part number W714040-S300) from the air cleaner intake. Prior to performing other diagnostics, inspect the air cleaner intake to determine if the retainers are present and fully seated. If the retainers are not present, install as necessary. Refer to the Workshop Manual (WSM), Section 303-12C Intake Air Distribution and Filtering - 3.5L EcoBoost (BM), Removal and Installation, Air Cleaner, Removal, Step 4. If the retainers are present, or the missing retainers were replaced and the symptom is still present, refer to the WSM for additional diagnostics. For claiming, use causal part 9C675 and applicable labor operations in Section 06 of the Service Labor Time Standards (SLTS) Manual.
Associated Products (3)Associated Documents - January 24, 2024•Document ID: 10249826Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- OTA 23PU1009SSNS
- Date Added:
- February 7, 2024
- Manufacturer:
- FORD
SummarySoftware Update PU1009-SS-NS for 2023 MY F-150 vehicles is now available. Quality Improvements include: -Eliminate incorrect Fuel System Lean PCM Fault DTC/MIL setting. - Robustness action in operation of vehicle to detect low-state-of-charge battery and prevent engine stall, as well as provide improved warning to customers when low-state-of-charge conditions exist. - Eliminate potential ABS Yaw Rate Calibration issue. - Robustness action to prevent potential line pressure drift DTC from setting. - Eliminate False Positive Throttle DTC or MIL from setting - Eliminate potential ABS Yaw Rate Calibration issue. - Robustness action to alleviate the Nuisance SSN (Stop Safely Now) message from setting and vehicle should operate as expected in the next Key Start event - Eliminates potential Emergency Parking Brake activation when wire harness experience a short.
Associated Products (3)Associated Documents - January 22, 2024•Document ID: 10249823Service Bulletin/Repair InstructionsPOWER TRAIN; ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
- Mfr Comm. #:
- OTA23PU0630YAW
- Date Added:
- February 7, 2024
- Manufacturer:
- FORD
SummarySoftware Update 23-PU0630-YAW-RT for 2021 MY F-150 vehicles is now available. Quality Improvements include: -Correct the Generator voltage desired (GENVDSD) parameter identification (PID) missing from the powertrain control module (PCM) PID list in the Ford Diagnosis And Repair System (FDRS) scan tool. Refer TSB 23-2154 - Robustness action in operation of vehicle to detect low-state-of-charge battery and prevent potential engine stall, as well as provide improved warning to customers when low-state-of-charge conditions exist. - Robustness action to prevent potential line pressure drift DTC P084B from setting. - Eliminate potential ABS Yaw Rate Calibration issue. - Robustness action to alleviate the Nuisance SSN (Stop Safely Now) mesage from setting and vehicle should operate as expected in the next Key Start event - Eliminates potential Emergency Parking Brake activation when wire harness experience a short.
Associated Products (1)Associated Documents - January 22, 2024•Document ID: 10249786Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- TSB 24-2020
- Date Added:
- February 6, 2024
- Manufacturer:
- FORD
SummaryThis article supersedes TSB 23-2367 to revise Step 8 of the Service Procedure. Some 2021-2023 F-150 vehicles equipped with a 400 watt direct current/alternating current (DC/AC) inverter system with a pickup bed alternating current (AC) power outlet socket may experience the DC/AC inverter system inoperative with diagnostic trouble code (DTC) B1330:9A stored in the body control module (BCM). This may be due to a connection issue at C4628
Associated Products (3)Associated Documents - December 20, 2023•Document ID: 10248370Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); POWER TRAIN
- Mfr Comm. #:
- TSB 23-2429
- Date Added:
- January 5, 2024
- Manufacturer:
- FORD
SummaryThis article supersedes TSB 23-2363 to add 2021-2022 vehicle model years, update the symptom and the causal part. Some 2021-2023 F-150 vehicles equipped with a 3.5L PowerBoost engine may exhibit an illuminated powertrain malfunction (wrench) indicator with diagnostic trouble code (DTC) P084B stored in the powertrain control module (PCM). This may be due to the software level of the PCM. To correct this condition, perform the Service Procedure below to reprogram the PCM to the latest software level via the Ford Diagnosis and Repair System (FDRS).
Associated Products (3)Associated Documents - December 20, 2023•Document ID: 10248369Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- TSB 23-2427
- Date Added:
- January 5, 2024
- Manufacturer:
- FORD
SummaryThis article supersedes TSB 23-2240 to to add labor operation H and correct parts list. Some 2021-2023 F-150 vehicles may exhibit a no crank/no start with a battery draw and air conditioning (A/C) clutch engaged at all times. This may be due to an opened diode in the A/C clutch field coil damaging the output driver (field effect transistor YFET) in the body control module C (BCMC). To correct the condition, follow the Service Procedure to replace the BCMC and A/C clutch field coil assembly.
Associated Products (3)Associated Documents - December 13, 2023•Document ID: 10248364Service Bulletin/Repair InstructionsBACK OVER PREVENTION:SOFTWARE; BACK OVER PREVENTION
- Mfr Comm. #:
- TSB 23-2416
- Date Added:
- January 5, 2024
- Manufacturer:
- FORD
SummarySome 2021 F-150 vehicles not equipped with a 360 camera system (minor feature code J3KAB, found by double-clicking the top left vehicle identification number (VIN) on OASIS) may exhibit an inoperative rear camera on demand feature when the rear camera button is pressed. This may be due to the software level of the SYNC module (APIM). To correct this condition, follow the Service Procedure to update the APIM via a coordinated flash along with image processing module A (IPMA) and instrument panel cluster (IPC) to the latest software level.
Associated Products (1)Associated Documents - December 13, 2023•Document ID: 10248268Service Bulletin/Repair InstructionsUNKNOWN OR OTHER; BACK OVER PREVENTION:SOFTWARE
- Mfr Comm. #:
- OTA SU7 P1 F150
- Date Added:
- January 4, 2024
- Manufacturer:
- FORD
SummarySoftware Update SU7 P1 for 2021- 2023 MY F150 vehicles is now available. Quality improvements include: -21 MY Increases availability of BlueCruise. Ignition reset will not be necessary to reengage BlueCriuse. -21 MY Reduces false eyes-off warnings -22-23 MY Reduces erroneuos braking for objects that are not in the path for Rear Park Aid and Reverse Brake Assist features.
Associated Products (3)Associated Documents - December 12, 2023•Document ID: 10248361Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; ELECTRICAL SYSTEM
- Mfr Comm. #:
- TSB 23-2408
- Date Added:
- January 5, 2024
- Manufacturer:
- FORD
SummarySome 2021 F-150 vehicles equipped with a 3.0L diesel engine and an 8 inch instrument panel cluster (IPC) display (minor feature code HKRAC, found by double-clicking the top left vehicle identification number (VIN) in OASIS) may exhibit an oil change minder feature that stays at 100% and does not decrease in the IPC. This may be due to the software level of the IPC. To correct this condition, follow the Service Procedure to update the APIM to the latest software level via a coordinated flash.
Associated Products (1)Associated Documents - December 12, 2023•Document ID: 10247526Service Bulletin/Repair InstructionsBACK OVER PREVENTION
- Mfr Comm. #:
- SSM 52134
- Date Added:
- December 19, 2023
- Manufacturer:
- FORD
SummaryVarious 2021-2024 Ford and Lincoln vehicles equipped with the rear camera on demand feature may exhibit a Please Check Surroundings For Safety or Full View Not Available message when the rear camera button is pressed and the vehicle is not in reverse. Inform customers this condition is considered normal operation and does not affect vehicle durability because the full rear view camera image can only be shown when the vehicle is in reverse. No additional diagnosis or service is required for this condition.
Associated Products (17)2024 Ford Edge2024 Ford Escape2023 Ford Edge2023 Ford Escape2023 Ford Expedition2023 Ford F-1502023 Lincoln Corsair2023 Lincoln Nautilus2023 Lincoln Navigator2022 Ford Edge2022 Ford Expedition2022 Ford F-1502022 Lincoln Nautilus2022 Lincoln Navigator2021 Ford Edge2021 Ford F-1502021 Lincoln NautilusAssociated Documents - December 8, 2023•Document ID: 10248360Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:INFOTAINMENT:SOFTWARE; EQUIPMENT:ELECTRICAL:INFOTAINMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- TSB 23-2407
- Date Added:
- January 5, 2024
- Manufacturer:
- FORD
SummarySome 2021-2022 F-150 vehicles equipped with a direct current/alternating current converter module A (DCACA) inverter (minor feature code HUKAK) may exhibit a Pro Power Onboard Unavailable message in the vehilce center display screen with DTC B15DA:09 in the BCM. This may be due to the software level of the BCM and powertrain control module (PCM). To confirm a vehicle is built with a certain minor feature code, review the build information by double-clicking the vehicle identification number (VIN) in the upper left corner in the Professional Technician System (PTS). To correct this condition, perform the Service Procedure below to reprogram the BCM and PCM to the latest software level via the Ford Diagnosis and Repair System (FDRS).
Associated Products (2)Associated Documents - November 30, 2023•Document ID: 10245674Service Bulletin/Repair InstructionsBACK OVER PREVENTION:SOFTWARE; EQUIPMENT
- Mfr Comm. #:
- SSM 52100
- Date Added:
- December 1, 2023
- Manufacturer:
- FORD
SummarySome 2021-2023 F-150 vehicles equipped with autowipers may exhibit an inoperative rain-sensing wipers feature, even when the feature is turned on in the Vehicle Settings menu. This may be due to the software level of the steering column control module (SCCM). To correct this condition, reprogram the SCCM using the latest software level of the Ford Diagnosis and Repair System (FDRS) located under the SW Updates tab. For claiming, use causal part 3F791 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Associated Products (3)Associated Documents - November 23, 2023•Document ID: 10246346Service Bulletin/Repair InstructionsEXTERIOR LIGHTING; ELECTRICAL SYSTEM:SOFTWARE; ELECTRICAL SYSTEM; ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:CONTROL MODULE
- Mfr Comm. #:
- OTAPU1009TLCCSM2
- Date Added:
- December 7, 2023
- Manufacturer:
- FORD
SummarySoftware Update PU1009-TLC-CSM2 for 2021 F-150 vehicles is now available. Quality Improvements include: -improvement to trailer license plate lights illumination. -improvement to interior motion sensor alarm to prevent inadvertent alarms -enhancement to prevent alarm activation during inhibit OTA updates
Associated Products (1)Associated Documents - November 23, 2023•Document ID: 10246145Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- TSB 23-2367
- Date Added:
- December 5, 2023
- Manufacturer:
- FORD
SummaryThis article supersedes TSB 22-2324 to add an additional model year. Some 2021-2023 F-150 vehicles equipped with a 400 watt direct current/alternating current (DC/AC) inverter system with a pickup bed alternating current (AC) power outlet socket may experience the DC/AC inverter system inoperative with diagnostic trouble code (DTC) B1330:9A stored in the body control module (BCM). This may be due to a connection issue at C4628. To correct the condition, follow the Service Procedure to inspect the connector and secure the harness.
Associated Products (3)Associated Documents - November 22, 2023•Document ID: 10246345Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; VISIBILITY:REARVIEW MIRRORS/DEVICES; ELECTRICAL SYSTEM; VISIBILITY:POWER WINDOW DEVICES AND CONTROLS
- Mfr Comm. #:
- OTAPU0813DORF150
- Date Added:
- December 7, 2023
- Manufacturer:
- FORD
SummarySoftware Update PU0813-DOR-UP2 for 2021 F-150 vehicles is now available. Quality Improvements include: -Improved 1-touch up window performance -Mirror unfold button performance improvement -Heated mirror overtemp fix Reference 21B16. -Prevent vehicles experiencing loss of driver frontal switch pack control (window, mirror, rear window lockout, mirror-fold if equipped)) at low voltage.
Associated Products (1)Associated Documents - November 20, 2023•Document ID: 10245391Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- SSM 52078
- Date Added:
- November 21, 2023
- Manufacturer:
- FORD
SummarySome 2021-2023 F-150 vehicles may exhibit DTC U023A:08 after reprogramming the SCCM. Do not replace or reprogram the SCCM, image processing module A (IPMA) or their components for this condition at this time. This DTC does not alert the customer, will not affect vehicle durability and no additional diagnosis or service is required for this condition at this time. Engineering is currently working on a solution for this condition that will reprogram the IPMA and is expected in late December 2023. Monitor OASIS for additional information.
Associated Products (3)Associated Documents - November 17, 2023•Document ID: 10245387Service Bulletin/Repair InstructionsVISIBILITY:POWER WINDOW DEVICES AND CONTROLS
- Mfr Comm. #:
- SSM 52074
- Date Added:
- November 21, 2023
- Manufacturer:
- FORD
SummarySome 2021-2023 F-150 vehicles equipped with one-touch up/down front windows may exhibit a window not responding to one-touch controls, does not open all the way and/or bounces back when using the one-touch close function. These may be due to a calibration parameter in the driver door module (DDM) and/or passenger door module (PDM). To correct the condition, reprogram the DDM and PDM using the latest level of the Ford Diagnosis and Repair System (FDRS) scan tool then perform the Power Door Window Initialization procedure for both the DDM and the PDM. For claiming, use causal part number 14B291 and applicable labor times from Section 10 of the Service Labor Times Standard (SLTS) Manual.
Associated Products (3)Associated Documents - November 15, 2023•Document ID: 10246123Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- TSB 23-2351
- Date Added:
- December 5, 2023
- Manufacturer:
- FORD
SummarySome 2021-2023 F-150, 2022-2023 Expedition/Navigator, 2022-2023 Mustang, 2020-2023 Transit, 2020-2023 Explorer/Aviator vehicles equipped with a 10R80/10R80MHT transmission may exhibit a harsh/delayed engagement and/or harsh/delayed shift, an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes. stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to the software in the powertrain control module (PCM) or transmission control module (TCM), the transmission solenoid ID strategy, sticking valves in the main control valve body and/or axial movement of the CDF clutch cylinder (7H351) sleeve.
Associated Products (18)2023 Ford Expedition2023 Ford Explorer2023 Ford F-1502023 Ford Mustang2023 Ford Transit2023 Lincoln Aviator2023 Lincoln Navigator2022 Ford Expedition2022 Ford Explorer2022 Ford F-1502022 Ford Mustang2022 Ford Transit2022 Lincoln Aviator2022 Lincoln Navigator2021 Ford Explorer2021 Ford F-1502021 Ford Transit2021 Lincoln AviatorAssociated Documents - November 14, 2023•Document ID: 10246334Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- OTASU6P2F-150
- Date Added:
- December 7, 2023
- Manufacturer:
- FORD
SummarySoftware Update SU6 P2 for 2021 F-150 vehicles is now available. Quality improvements include: -Ford Blue Cruise Map expiration removal update. - Adds a "some display features may be temporarily unavailable" message to the SYNC screen when a SYNC update is installing. - Selectable Drive Modes - prevent default to normal mode due to loss of communication with SYNC - Improved SYNC Display and single toggle addition to disable certain features that will help enhance your towing experience. - Improved instant voice feedback share feature -Addresses SYNC reboot issue may occurs after 2 hours of continuous use.
Associated Products (1)Associated Documents - November 14, 2023•Document ID: 10245357Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:INFOTAINMENT:SOFTWARE; EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM); EQUIPMENT:ELECTRICAL:INFOTAINMENT
- Mfr Comm. #:
- TSB 23-2345
- Date Added:
- November 21, 2023
- Manufacturer:
- FORD
SummarySome 2021-2023 Ford and Lincoln vehicles equipped with SYNC 4 may exhibit the navigation feature in the center display screen only displaying imperial (feet and miles) units and not being able to change to metric (meters and kilometers) units. This may be due to the software level of the SYNC module (APIM). To correct this condition, follow the Service Procedure to update the APIM to the latest software level via a coordinated flash. NOTE: The APIM software update that addresses the symptom listed in this article may have been sent via Ford Power-Up software updates delivered over-the-air (OTA) to connected vehicles that have automatic updates enabled through the center display screen. Enter the vehicle identification number (VIN) in Professional Technician System (PTS) and check the OTA Dashboard under the Connected Vehicle tab for OTA update history. If an update to the APIM has successfully completed recently and the customer is reporting the symptoms are no longer present, this article may not apply.
Associated Products (15)Associated Documents