Kia Forte Service Bulletins (2020)
100 manufacturer communications on file.
- August 5, 2026•Document ID: 11036452Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE
- Mfr Comm. #:
- TSB_ENG263
- Date Added:
- August 28, 2026
- Manufacturer:
- KIA
SummaryTECHNICAL SERVICE BULLETIN: MISFIRE CONCERN DUE TO OVERRUNNING ALTERNATOR DECOUPLER - This bulletin provides information to address unresolved misfire events on some 2020–2024MY Forte (BDm) produced from January 1, 2019 through September 30, 2024, and 2020–2022MY Soul (SK3) vehicles produced from November 1, 2018 through May 31, 2022 equipped with a Gamma 1.6L T‑GDI engine. In certain cases, misfire symptoms may persist after completing normal diagnostic procedures and replacing ignition‑related components (spark plugs, ignition coils, and fuel injectors). If misfire concerns remain after these repairs are performed, excessive torsional oscillation of the Overrunning Alternator Decoupler (OAD) pulley may be the contributing factor. This bulletin provides the procedure to replace the OAD pulley with the updated Overrunning Alternator Pulley (OAP) kit and associated damper components.
Associated Products (8)Associated Documents - June 8, 2026•Document ID: 11034003Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- CS2312_TSB_R2
- Date Added:
- June 18, 2026
- Manufacturer:
- KIA
SummaryTECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: THEFT DETERRENT IGNITION CYLINDER PROTECTOR AND DECAL INSTALLATION (CS2312) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to install a Theft Deterrent Ignition Cylinder Protector on certain 2010-2022MY Kia vehicles outlined on page 20, which may not have been equipped with an immobilizer and whose Integrated Body Control Unit (IBU) / Body Control Module (BCM) did receive the Anti-Theft Software Logic upgrade under CS2301/02/03/04/05/06/07/08/09 TSBs. In an effort to help prevent thefts of Kia vehicles, a protective cover will be permanently affixed to the ignition cylinder. This Theft Deterrent Ignition Cylinder Protector prevents the removal of the key lock cylinder thereby preventing access to the ignition tumbler.
Associated Products (69)Associated Documents - February 19, 2026•Document ID: 11029037EmissionsELECTRICAL SYSTEM; POWER TRAIN
- Mfr Comm. #:
- SC199_OWNR_BD_3
- Date Added:
- February 25, 2026
- Manufacturer:
- KIA
SummaryVOLUNTARY EMISSIONS SERVICE CAMPAIGN: OWNER RENOTIFICATION (SC199 FL301) - This document is the owner renotification advising that Kia is conducting Voluntary Service Campaign to update the software programming on the Transmission Control Module (TCM) and, if necessary, replace the Intelligent Variable Transmission (IVT) on certain 2019-2020 MY Forte vehicles.
Associated Products (2)Associated Documents - February 19, 2026•Document ID: 11028908Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- TSB_CS2312_R1
- Date Added:
- February 19, 2026
- Manufacturer:
- KIA
SummaryTECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: THEFT DETERRENT IGNITION CYLINDER PROTECTOR AND DECAL INSTALLATION (CS2312) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to install a Theft Deterrent Ignition Cylinder Protector on certain 2010-2022MY Kia vehicles outlined on page 20, which may not have been equipped with an immobilizer and whole Integrated Body control Unit (IBU) / Body Control Module (BCM) did receive the Ant-Theft Software Logic upgrade under CS2301/02/03/04/05/06/07/08/09 TSBs. In an effort to help prevent thefts of Kia vehicles, a protective cover will be permanently affixed to the ignition cylinder. This Theft Deterrent Ignition Cylinder Protector prevents the removal of the key lock cylinder thereby preventing access to the ignition tumbler.
Associated Products (72)Associated Documents - December 18, 2025•Document ID: 11026825Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- TSB_CS2312
- Date Added:
- December 24, 2025
- Manufacturer:
- KIA
SummaryTECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: THEFT DETERRENT IGNITION CYLINDER PROTECTOR AND DECAL INSTALLATION (CS2312) - This bulletin provides information to install a Theft Deterrent Ignition Cylinder Protector on certain 2010-2022MY Kia vehicles outlined on page 19, which may not have been equipped with an immobilizer and whose Integrated Body Control Unit (IBU) / Body Control Module (BCM) did receive the Anti-Theft Software Logic upgrade under CS2301/02/03/04/05/06/07/08/09 TSBs. In an effort to help prevent thefts of Kia vehicles, a protective cover will be permanently affixed to the ignition cylinder. This Theft Deterrent Ignition Cylinder Protector prevents the removal of the key lock cylinder thereby preventing access to the ignition tumbler.
Associated Products (73)Associated Documents - December 17, 2025•Document ID: 11026980OtherSTRUCTURE:BODY
- Mfr Comm. #:
- CS2312_OWNR
- Date Added:
- January 5, 2026
- Manufacturer:
- KIA
SummaryCUSTOMER SATISFACTION CAMPAIGN: OWNER NOTIFICATION (CS2312) - This document is the owner notification advising that Kia is conducting Customer Satisfaction Campaign. A software upgrade that addresses the social media theft method has been made available to owners of eligible Kia model vehicles free of charge at authorized Kia dealers since 2023. In addition to the anti-theft software, a new zinc-reinforced ignition cylinder protector hardware upgrade has been developed and can be installed at the ignition cylinder location to provide additional protection against the social media theft method. Because the subject Kia vehicles were not factory-equipped with an engine immobilizer and were previously eligible for the software upgrade, these vehicles are eligible until March 31, 2027, to have the ignition cylinder protector installed—if requested—at no cost through an authorized Kia dealership. (Mailing of these notifications to vehicle owners will be completed from December 17, 2025 through February 27, 2026)
Associated Products (73)Associated Documents - December 9, 2025•Document ID: 11026698OtherBACK OVER PREVENTION: WARNINGS
- Mfr Comm. #:
- PS797
- Date Added:
- December 18, 2025
- Manufacturer:
- KIA
SummaryPITSTOP: TECHNICAL OPERATIONS: EXTERNAL DAMAGE TO ULTRASONIC SENSOR: This Pitstop provides information related to Parking Distance Warning (PDW) alerts and repairs involving ultrasonic sensors. The PDW system alerts the driver while parking, by calculating distance based on the difference in signal transmission and reception times between the vehicle (ultrasonic sensor) and an object. The membrane film of the ultrasonic sensor is used for object detention and can be damaged by stone chips or foreign substances while driving. Damage to the cover of the ultrasonic sensor can also lead to damage to the internal circuit. As a result of this external damage, the PDW system may not receive the proper signal from the ultrasonic sensor. In some cases, the system may cause a false alarm, no alert, or phantom warnings by a “Warning Lamp’ to be displayed on the cluster. The ultrasonic sensor membrane film should be always inspected for external damage and if any part replacement should be treated as a general repair, not as a warranty claim repair for this concern. (Please note that this Pitstop only applies to models/trims that are equipped with the ultrasonic sensors.)
Associated Products (157)Associated Documents - April 17, 2025•Document ID: 11017172Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- TSB_TRA046_R5
- Date Added:
- April 23, 2025
- Manufacturer:
- KIA
SummaryTECHNICAL SERVICE BULLETIN: TRANSMISSION FLUID APPLICATION GUIDE - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information relating to the correct transmission fluid type and fill quantity requirement for each Kia model. A flush is required ONLY when a transmission is replaced, and the transmission oil cooler is transferred to the new transmission.
Associated Products (165)Associated Documents - April 3, 2025•Document ID: 11017109Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- TSB_ENG222_R8
- Date Added:
- April 18, 2025
- Manufacturer:
- KIA
SummaryTECHNICAL SERVICE BULLETIN: EXCESSIVE OIL CONSUMPTION NU/GAMMA/THETA/KAPPA ENGINES - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information on diagnosing and/or repairing some 2011-2024MY vehicles (refer to the table on pages 9 and 10 for applicable models and engine), which may exhibit a symptom of excessive oil consumption.
Associated Products (74)Associated Documents - March 20, 2025•Document ID: 11015973Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- TSB_ELE378
- Date Added:
- March 26, 2025
- Manufacturer:
- KIA
SummaryTECHNICAL SERVICE BULLETIN: SERVICE ACTION: KIA CONNECT MODEM RESET (SA611) - This bulletin outlines the procedure for resetting the modem in certain 2016-2025MY Kia vehicles listed on page 3 that are equipped with Kia Connect Services. The affected vehicles may encounter the following issues: remote Start/Climate Control function not working, vehicle Status on the Kia Access App not updating, connected routing not functioning properly.
Associated Products (68)Associated Documents - February 28, 2025•Document ID: 11014912Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- TSB_ENG222_R7
- Date Added:
- March 4, 2025
- Manufacturer:
- KIA
SummaryTECHNICAL SERVICE BULLETIN: EXCESSIVE OIL CONSUMPTION NU/GAMMA/THETA/KAPPA ENGINES - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information on diagnosing and/or repairing some 2011-2024MY vehicles (refer to the tables on pages 8-9 for applicable models and engine), which may exhibit a symptom of excessive oil consumption.
Associated Products (74)Associated Documents - September 13, 2024•Document ID: 11007859Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- TSB_CHA121_R2
- Date Added:
- September 17, 2024
- Manufacturer:
- KIA
SummaryTECHNICAL SERVICE BULLETIN: FRONT STRUT BEARING & SPRING PAD REPLACEMENT - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to replace the front strut bearing and upper spring pad on both front (LH and RH) strut assemblies on certain 2019-2024MY Forte (BDm) vehicles produced from July 09, 2018 through present, 2020-2024MY Soul (SK3) vehicles produced from November 15, 2018 through present, and 2021-2024 Seltos (SP2) vehicles produced from November 20, 2019 through present. The affected vehicles may exhibit an intermittent noise when turning the steering wheel both when driving and when the vehicle is not in motion.
Associated Products (15)Associated Documents - July 26, 2024•Document ID: 11005364Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- TSB_CHA121_R1
- Date Added:
- July 31, 2024
- Manufacturer:
- KIA
SummaryTECHNICAL SERVICE BULLETIN: FRONT STRUT BEARING & SPRING PAD REPLACEMENT - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to replace the front strut bearing and upper spring pad on both front (LH and RH) strut assemblies on certain 2019-2024MY Forte (BDm) vehicles produced from July 09, 2018 through present, 2020-2024MY Soul (SK3) vehicles produced from November 15, 2018 through present, and 2021-2024 Seltos (SP2) vehicles produced from November 20, 2019 through present. The affected vehicles may exhibit an intermittent noise when turning the steering wheel both when driving and when the vehicle is not in motion.
Associated Products (15)Associated Documents - July 11, 2024•Document ID: 11004930Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- TSB_TRA109
- Date Added:
- July 18, 2024
- Manufacturer:
- KIA
SummaryTECHNICAL SERVICE BULLETIN: IVT OIL PRESSURE SENSOR REPLACEMENT: This bulletin provides information to replace the Intelligent Variable Transmission (IVT) Oil Pressure Sensor (OPS) on some 2018-2024MY vehicles listed on page 3 equipped with IVT. The affected vehicles may exhibit a malfunction indicator lamp (MIL) illuminated on the instrument cluster with DTCs P084500, P084600, and/or P0867XX present with no drivability concerns due to a failed IVT oil pressure sensor.
Associated Products (21)Associated Documents - June 6, 2024•Document ID: 11001596Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- CS2305_TSB_R5
- Date Added:
- June 13, 2024
- Manufacturer:
- KIA
SummaryTECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: ANTI-THEFT S/W LOGIC UPGRADE & DECAL INSTALLATION (CS2305) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to upgrade the software logic of the Integrated Body Control Unit (IBU) or Body Control Module (BCM) system on certain 2014-2018MY Forte (YD), 2017-2018MY Forte (YDm), and 2019-2021MY Forte (BDm) vehicles produced within the dates outlined in page 13, which may not be equipped with an immobilizer. This logic upgrade will add anti-theft ignition start logic to the vehicle's system operation which activates when the vehicle is locked with the use of the key fob.
Associated Products (12)Associated Documents - May 16, 2024•Document ID: 11000787Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- TSB_TRA046_R4
- Date Added:
- June 4, 2024
- Manufacturer:
- KIA
SummaryThis bulletin provides information relating to the correct transmission fluid type and fill quantity requirement for each Kia model. A flush is required ONLY when a transmission is replaced.
Associated Products (165)Associated Documents - February 9, 2024•Document ID: 10250517Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- TSB_ELE303_R2
- Date Added:
- March 2, 2024
- Manufacturer:
- KIA
SummaryTECHNICAL SERVICE BULLETIN: AVN 5.0 WIDE NON-RESPONSIVE RADIO ICON (AM, FM, SXM) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to update the software on 5th Generation AVN wide on certain 2020-2024MY Kia vehicles (refer to model list on page 3) to remedy a 'non-responsive' or 'inoperative' radio (FM, AM, SXM, etc. ) concern. The affected AVN unit on the vehicles may not respond when pressing the 'RADIO' hard key/button on the AVN unit or when selecting the 'RADIO' icon on the AVN menu screen.
Associated Products (61)Associated Documents - January 8, 2024•Document ID: 10248691Service Bulletin/Repair InstructionsSUSPENSION; STRUCTURE
- Mfr Comm. #:
- TSB_CHA121
- Date Added:
- February 2, 2024
- Manufacturer:
- KIA
SummaryTECHNICAL SERVICE BULLETIN: FRONT STRUT BEARING & SPRING PAD REPLACEMENT - This bulletin provides information to replace the front strut bearing and upper spring pad on both front (LH and RH) strut assemblies on certain 2019-2024MY Forte (BDm) vehicles produced from July 09, 2018 through present, 2020-2024MY Soul (SK3) vehicles produced from November 15, 2018 through present, and 2021-2024 Seltos (SP2) vehicles produced from November 20, 2019 through present. The affected vehicles may exhibit an intermittent noise when turning the steering wheel both when driving and when the vehicle is not in motion.
Associated Products (15)Associated Documents - November 2, 2023•Document ID: 10245168Service Bulletin/Repair InstructionsSEATS; STRUCTURE
- Mfr Comm. #:
- TSB_BOD212_R1
- Date Added:
- December 5, 2023
- Manufacturer:
- KIA
SummaryTECHNICAL SERVICE BULLETIN: PARTIAL SEAT TRACK REPLACEMENT FOR INOPERATIVE FRONT SEAT - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to inspect and repair an inoperative front seat mechanism on some 2019-2024MY Forte (BDm) vehicles produced from June 18, 2018 through Present and some 2018-2023MY Rio (SC) vehicles produced from January 2, 2017 through August 16, 2023. Symptoms of an inoperative front seat include the inability of the seat to move forward and backward, which may be caused by a pin getting stuck on a rail.
Associated Products (12)Associated Documents - November 2, 2023•Document ID: 10245167Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:CONTROL MODULE; ELECTRICAL SYSTEM
- Mfr Comm. #:
- CS2305_TSB_R4
- Date Added:
- December 5, 2023
- Manufacturer:
- KIA
SummaryTECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: ANTI-THEFT S/W LOGIC UPGRADE & DECAL INSTALLATION (CS2305) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to upgrade the software logic of the Integrated Body Control Unit (IBU) or Body Control Module (BCM) system on certain 2014-2018MY Forte (YD), 2017-2018MY Forte (YDm), and 2019-2021MY Forte (BDm) vehicles produced within the dates outlined in page 13, which may not be equipped with an immobilizer. This logic upgrade will add anti-theft ignition start logic to the vehicle's system operation which activates when the vehicle is locked.
Associated Products (12)Associated Documents