Kia Forte Service Bulletins
471 manufacturer communications on file.
- August 5, 2026•Document ID: 11036452Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE
- Mfr Comm. #:
- TSB_ENG263
- Date Added:
- August 28, 2026
- Manufacturer:
- KIA
SummaryTECHNICAL SERVICE BULLETIN: MISFIRE CONCERN DUE TO OVERRUNNING ALTERNATOR DECOUPLER - This bulletin provides information to address unresolved misfire events on some 2020–2024MY Forte (BDm) produced from January 1, 2019 through September 30, 2024, and 2020–2022MY Soul (SK3) vehicles produced from November 1, 2018 through May 31, 2022 equipped with a Gamma 1.6L T‑GDI engine. In certain cases, misfire symptoms may persist after completing normal diagnostic procedures and replacing ignition‑related components (spark plugs, ignition coils, and fuel injectors). If misfire concerns remain after these repairs are performed, excessive torsional oscillation of the Overrunning Alternator Decoupler (OAD) pulley may be the contributing factor. This bulletin provides the procedure to replace the OAD pulley with the updated Overrunning Alternator Pulley (OAP) kit and associated damper components.
Associated Products (8)Associated Documents - July 18, 2026•Document ID: 11035090Service CampaignSERVICE BRAKES
- Mfr Comm. #:
- SC238_OWNR_501
- Date Added:
- July 18, 2026
- Manufacturer:
- KIA
SummaryVOLUNTARY SERVICE CAMPAIGN: OWNER RENOTIFICATION (SC238 Flight #501) - This document is the owner renotification advising that Kia is conducting a Voluntary Service Campaign to inspect and, if necessary, replace brake line(s) in certain 2014-2017 MY Forte and Forte Koup vehicles that were originally sold in or are currently registered in states where heavy amounts of road salt are used. In addition, an anti-corrosion material will be applied to the underbody components for added protection.
Associated Products (8)Associated Documents - June 9, 2026•Document ID: 11033803Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- CS2311_TSB_R4
- Date Added:
- June 12, 2026
- Manufacturer:
- KIA
SummaryTECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: THEFT DETERRENT IGNITION: CYLINDER PROTECTOR & DECAL INSTALLATION (CS2311) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to install a Theft Deterrent Ignition Cylinder Protector on certain 2010-2022MY Kia vehicles outlined on page 20, which may not have been equipped with an immobilizer and whose Integrated Body Control Unit (IBU) / Body Control Module (BCM) are not able to receive the Anti-Theft Software Logic upgrade under CS2301/02/03/04/05/06/07/08/09 TSBs. In an effort to help prevent thefts of Kia vehicles that are not equipped with an immobilizer, a protective cover will be permanently affixed to the ignition cylinder. This Theft Deterrent Ignition Cylinder Protector prevents the removal of the key lock cylinder thereby preventing access to the ignition tumbler.
Associated Products (35)Associated Documents - June 8, 2026•Document ID: 11034003Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- CS2312_TSB_R2
- Date Added:
- June 18, 2026
- Manufacturer:
- KIA
SummaryTECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: THEFT DETERRENT IGNITION CYLINDER PROTECTOR AND DECAL INSTALLATION (CS2312) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to install a Theft Deterrent Ignition Cylinder Protector on certain 2010-2022MY Kia vehicles outlined on page 20, which may not have been equipped with an immobilizer and whose Integrated Body Control Unit (IBU) / Body Control Module (BCM) did receive the Anti-Theft Software Logic upgrade under CS2301/02/03/04/05/06/07/08/09 TSBs. In an effort to help prevent thefts of Kia vehicles, a protective cover will be permanently affixed to the ignition cylinder. This Theft Deterrent Ignition Cylinder Protector prevents the removal of the key lock cylinder thereby preventing access to the ignition tumbler.
Associated Products (69)Associated Documents - May 28, 2026•Document ID: 11033217Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- TSB_ELE422
- Date Added:
- June 3, 2026
- Manufacturer:
- KIA
SummaryTECHNICAL SERVICE BULLETIN: INFOTAINMENT SYSTEM SOFTWARE UPDATE USING UPDATE.KIA.COM - This bulletin provides information and service procedures for updating the infotainment systems on applicable Kia vehicles using the Kia Navigation Updater available at update.kia.com. The software update may improve system performance, enhance existing features, and apply the latest operating software for supported vehicles (2021-2026MY All Models).
Associated Products (70)Associated Documents - April 14, 2026•Document ID: 11031906Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- TSB_ELE417
- Date Added:
- May 1, 2026
- Manufacturer:
- KIA
SummaryTECHNICAL SERVICE BULLETIN: INFOTAINMENT SOFTWARE UPDATE PROCEDURE - This bulletin provides information on the process for downloading infotainment software updates and preparing USB for installation on applicable Kia vehicles. The software downloads and USB preparation process is similar across all supported platforms; however, in‑vehicle installation procedures vary by head unit type.
Associated Products (45)Associated Documents - April 1, 2026•Document ID: 11030378OtherENGINE; ELECTRICAL SYSTEM
- Mfr Comm. #:
- PI2106_OWNR_501
- Date Added:
- April 1, 2026
- Manufacturer:
- KIA
SummaryPRODUCT IMPROVEMENT CAMPAIGN: OWNER RENOTIFICATION (PI2106 FLIGHT 501) - This document is the owner renotification advising that Kia is conducting a Product Improvement Campaign to perform a software update on 2017-2018 MY Kia Forte vehicles equipped with 2.0-liter Nu GDI engines to protect the engine from excessive connecting rod bearing damage. The update will be done free of charge and will only involve the addition of newly developed computer software for the Engine Control Unit (“ECU”).
Associated Products (3)Associated Documents - March 25, 2026•Document ID: 11030343OtherENGINE; ELECTRICAL SYSTEM
- Mfr Comm. #:
- PI2105_OWNR_501
- Date Added:
- March 31, 2026
- Manufacturer:
- KIA
SummaryPRODUCT IMPROVEMENT CAMPAIGN: OWNER RENOTIFICATION (PI2105 FLIGHT 501) - This document is the owner renotification advising that Kia is conducting a Product Improvement Campaign to perform a software update on 2016 MY Forte and Forte Koup vehicles equipped with 2.0-liter GDI engines to protect the engine from excessive connecting rod bearing damage. The update will be done free of charge and will only involve the addition of newly developed computer software for the Engine Control Unit (“ECU”).
Associated Products (2)Associated Documents - March 4, 2026•Document ID: 11029972OtherENGINE; ELECTRICAL SYSTEM
- Mfr Comm. #:
- PI2102_OWNR_501
- Date Added:
- March 12, 2026
- Manufacturer:
- KIA
SummaryPRODUCT IMPROVEMENT CAMPAIGN: OWNER RENOTIFICATION (PI2102 FLIGHT #501) - This document is the owner renotification advising that Kia is conducting an important Product Improvement Campaign to perform a software update on 2010-2011 MY Kia Forte and Forte Koup vehicles equipped with 2.4-liter MPI engines to protect the engine from excessive connecting rod bearing damage. The update will be done free of charge and will only involve the addition of newly developed computer software for the Engine Control Unit (“ECU”).
Associated Products (4)Associated Documents - February 19, 2026•Document ID: 11029037EmissionsELECTRICAL SYSTEM; POWER TRAIN
- Mfr Comm. #:
- SC199_OWNR_BD_3
- Date Added:
- February 25, 2026
- Manufacturer:
- KIA
SummaryVOLUNTARY EMISSIONS SERVICE CAMPAIGN: OWNER RENOTIFICATION (SC199 FL301) - This document is the owner renotification advising that Kia is conducting Voluntary Service Campaign to update the software programming on the Transmission Control Module (TCM) and, if necessary, replace the Intelligent Variable Transmission (IVT) on certain 2019-2020 MY Forte vehicles.
Associated Products (2)Associated Documents - February 19, 2026•Document ID: 11028908Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- TSB_CS2312_R1
- Date Added:
- February 19, 2026
- Manufacturer:
- KIA
SummaryTECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: THEFT DETERRENT IGNITION CYLINDER PROTECTOR AND DECAL INSTALLATION (CS2312) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to install a Theft Deterrent Ignition Cylinder Protector on certain 2010-2022MY Kia vehicles outlined on page 20, which may not have been equipped with an immobilizer and whole Integrated Body control Unit (IBU) / Body Control Module (BCM) did receive the Ant-Theft Software Logic upgrade under CS2301/02/03/04/05/06/07/08/09 TSBs. In an effort to help prevent thefts of Kia vehicles, a protective cover will be permanently affixed to the ignition cylinder. This Theft Deterrent Ignition Cylinder Protector prevents the removal of the key lock cylinder thereby preventing access to the ignition tumbler.
Associated Products (72)Associated Documents - December 19, 2025•Document ID: 11026989OtherSTRUCTURE:BODY
- Mfr Comm. #:
- CS2311_OWNR_PC201
- Date Added:
- January 5, 2026
- Manufacturer:
- KIA
SummaryCUSTOMER SATISFACTION CAMPAIGN: POSTCARD OWNER RENOTIFICATION (CS2311) - This document is the owner renotification advising that Kia is conducting Customer Satisfaction Campaign. Kia has developed a new zinc-reinforced ignition cylinder protector hardware upgrade and can be installed at the ignition cylinder location to provide additional protection against the social media theft method. Prior notifications stated that this modification had to be performed by July 1, 2025, but the subject vehicles are now eligible until March 31, 2027, to have the ignition cylinder protector installed—if requested—at no cost through an authorized Kia dealership. (Mailing of these notifications to vehicle owners will be completed from December 19, 2025 through December 31, 2025)
Associated Products (41)Associated Documents - December 18, 2025•Document ID: 11026825Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- TSB_CS2312
- Date Added:
- December 24, 2025
- Manufacturer:
- KIA
SummaryTECHNICAL SERVICE BULLETIN: CUSTOMER SATISFACTION: THEFT DETERRENT IGNITION CYLINDER PROTECTOR AND DECAL INSTALLATION (CS2312) - This bulletin provides information to install a Theft Deterrent Ignition Cylinder Protector on certain 2010-2022MY Kia vehicles outlined on page 19, which may not have been equipped with an immobilizer and whose Integrated Body Control Unit (IBU) / Body Control Module (BCM) did receive the Anti-Theft Software Logic upgrade under CS2301/02/03/04/05/06/07/08/09 TSBs. In an effort to help prevent thefts of Kia vehicles, a protective cover will be permanently affixed to the ignition cylinder. This Theft Deterrent Ignition Cylinder Protector prevents the removal of the key lock cylinder thereby preventing access to the ignition tumbler.
Associated Products (73)Associated Documents - December 17, 2025•Document ID: 11026980OtherSTRUCTURE:BODY
- Mfr Comm. #:
- CS2312_OWNR
- Date Added:
- January 5, 2026
- Manufacturer:
- KIA
SummaryCUSTOMER SATISFACTION CAMPAIGN: OWNER NOTIFICATION (CS2312) - This document is the owner notification advising that Kia is conducting Customer Satisfaction Campaign. A software upgrade that addresses the social media theft method has been made available to owners of eligible Kia model vehicles free of charge at authorized Kia dealers since 2023. In addition to the anti-theft software, a new zinc-reinforced ignition cylinder protector hardware upgrade has been developed and can be installed at the ignition cylinder location to provide additional protection against the social media theft method. Because the subject Kia vehicles were not factory-equipped with an engine immobilizer and were previously eligible for the software upgrade, these vehicles are eligible until March 31, 2027, to have the ignition cylinder protector installed—if requested—at no cost through an authorized Kia dealership. (Mailing of these notifications to vehicle owners will be completed from December 17, 2025 through February 27, 2026)
Associated Products (73)Associated Documents - December 9, 2025•Document ID: 11026698OtherBACK OVER PREVENTION: WARNINGS
- Mfr Comm. #:
- PS797
- Date Added:
- December 18, 2025
- Manufacturer:
- KIA
SummaryPITSTOP: TECHNICAL OPERATIONS: EXTERNAL DAMAGE TO ULTRASONIC SENSOR: This Pitstop provides information related to Parking Distance Warning (PDW) alerts and repairs involving ultrasonic sensors. The PDW system alerts the driver while parking, by calculating distance based on the difference in signal transmission and reception times between the vehicle (ultrasonic sensor) and an object. The membrane film of the ultrasonic sensor is used for object detention and can be damaged by stone chips or foreign substances while driving. Damage to the cover of the ultrasonic sensor can also lead to damage to the internal circuit. As a result of this external damage, the PDW system may not receive the proper signal from the ultrasonic sensor. In some cases, the system may cause a false alarm, no alert, or phantom warnings by a “Warning Lamp’ to be displayed on the cluster. The ultrasonic sensor membrane film should be always inspected for external damage and if any part replacement should be treated as a general repair, not as a warranty claim repair for this concern. (Please note that this Pitstop only applies to models/trims that are equipped with the ultrasonic sensors.)
Associated Products (157)Associated Documents - November 13, 2025•Document ID: 11025759Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- TSB_GEN103
- Date Added:
- December 1, 2025
- Manufacturer:
- KIA
SummaryTECHNICAL SERVICE BULLETIN: TIRE MOBILITY REPLACEMENT - This bulletin provides information to replace the Tire Mobility Kit (TMK) sealant can or TMK bag assembly on certain 2023-2024MY Forte (BDm) models produced from March 01, 2023 thorough November 30, 2023. Lower ambient temperatures can create a vacuum effect inside the TMK sealant can, causing the sealant can cap to open, resulting in the tire sealant leaking.
Associated Products (2)Associated Documents - August 5, 2025•Document ID: 11021640OtherELECTRICAL SYSTEM; ENGINE
- Mfr Comm. #:
- PI2106_OWNR_401
- Date Added:
- August 6, 2025
- Manufacturer:
- KIA
SummaryPRODUCT IMPROVEMENT CAMPAIGN: OWNER RENOTIFICATION (PI2106) - This document is the owner renotification advising that Kia is conducting a Product Improvement Campaign to perform a software update on 2017-2018 MY Kia Forte vehicles equipped with 2.0-liter Nu GDI engines to protect the engine from excessive connecting rod bearing damage. The update will be done free of charge and will only involve the addition of newly developed computer software for the Engine Control Unit (“ECU”).
Associated Products (2)Associated Documents - July 23, 2025•Document ID: 11021052OtherELECTRICAL SYSTEM; ENGINE
- Mfr Comm. #:
- PI2105_OWNR_401
- Date Added:
- July 31, 2025
- Manufacturer:
- KIA
SummaryPRODUCT IMPROVEMENT CAMPAIGN: OWNER RENOTIFICATION (PI2105) - This document is the owner renotification advising that Kia is conducting a Product Improvement Campaign to perform a software update on 2016 MY Forte and Forte Koup vehicles equipped with 2.0-liter GDI engines to protect the engine from excessive connecting rod bearing damage. The update will be done free of charge and will only involve the addition of newly developed computer software for the Engine Control Unit (“ECU”).
Associated Products (2)Associated Documents - July 1, 2025•Document ID: 11020586OtherELECTRICAL SYSTEM; ENGINE
- Mfr Comm. #:
- PI2102_OWNR_401
- Date Added:
- July 9, 2025
- Manufacturer:
- KIA
SummaryPRODUCT IMPROVEMENT CAMPAIGN: OWNER RENOTIFICATION (PI2102) - This document is the owner renotification advising that Kia is conducting a Product Improvement Campaign to perform a software update on 2010-2011 MY Kia Forte and Forte Koup vehicles equipped with 2.4-liter MPI engines to protect the engine from excessive connecting rod bearing damage. The update will be done free of charge and will only involve the addition of newly developed computer software for the Engine Control Unit (“ECU”).
Associated Products (4)Associated Documents - April 17, 2025•Document ID: 11017172Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- TSB_TRA046_R5
- Date Added:
- April 23, 2025
- Manufacturer:
- KIA
SummaryTECHNICAL SERVICE BULLETIN: TRANSMISSION FLUID APPLICATION GUIDE - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information relating to the correct transmission fluid type and fill quantity requirement for each Kia model. A flush is required ONLY when a transmission is replaced, and the transmission oil cooler is transferred to the new transmission.
Associated Products (165)Associated Documents