Ford Ranger Service Bulletins (2025)
67 manufacturer communications on file.
- September 3, 2025•Document ID: 11023856OtherENGINE; UNKNOWN OR OTHER
- Mfr Comm. #:
- 25H03
- Date Added:
- October 3, 2025
- Manufacturer:
- LINCOLN
SummaryHarvest Program 25H03 Certain 2024 - 2025 Model Year Bronco, Bronco Sport, Corsair, Escape, Explorer, Maverick, Mustang, and Ranger Vehicles with 1.5L, 2.0L, or 2.3L Engine Spark Plug Replacemen
Associated Products (16)Associated Documents - September 2, 2025•Document ID: 11023710Over The AirENGINE
- Mfr Comm. #:
- PCM-25.10.0 Ranger
- Date Added:
- October 3, 2025
- Manufacturer:
- FORD
SummaryQuality improvements include: -On-Board Diagnostics calibration for an enhanced Intake air temperature sensor performance
Associated Products (1)Associated Documents - August 28, 2025•Document ID: 11022299OtherELECTRICAL SYSTEM; ENGINE
- Mfr Comm. #:
- 25H03
- Date Added:
- September 2, 2025
- Manufacturer:
- FORD
SummaryCertain 2024 - 2025 Model Year Bronco, Bronco Sport, Corsair, Escape, Explorer, Maverick, Mustang, and Ranger Vehicles with 1.5L, 2.0L, or 2.3L Engine Spark Plug Replacement
Associated Products (16)Associated Documents - August 14, 2025•Document ID: 11021976Service Bulletin/Repair InstructionsFUEL/PROPULSION SYSTEM
- Mfr Comm. #:
- SSM 54138
- Date Added:
- August 19, 2025
- Manufacturer:
- FORD
SummarySome 2024-2025 F-150, Expedition/Navigator, Escape/Corsair, Bronco, Explorer, Mustang, Maverick vehicles equipped with a 1.5/2.0/2.3/3.5L EcoBoost engine and built on 01-Oct-2024 and through 31-May-2025 may exhibit an extended crank condition, strong fuel smell in the engine oil, high engine oil level and may have various drivability diagnostic trouble codes (DTCs) stored in the powertrain control module (PCM) with an illuminated malfunction indicator lamp (MIL). This may be due to an internal fuel leak of the fuel injection pump causing fuel to enter the crankcase and reduce fuel pressure in the high pressure fuel rail. Diagnose this condition using Pinpoint Test HP located in the Workshop Manual, Section 303-04A. If no DTCs are stored in the PCM, proceed from Step HP1 to Step HP5 and continue testing. For claiming, if fuel injection pump replacement is required, use causal part number 9D376 and labor operation code 9543A. If the root cause is identified as anything other than the fuel injection pump, claim the repair outside of this article. Note: Components damaged as a result of this failure mode
Associated Products (18)2025 Ford Bronco2025 Ford Bronco Sport2025 Ford Expedition2025 Ford Explorer2025 Ford F-1502025 Ford Maverick2025 Ford Mustang2025 Ford Ranger2025 Lincoln Corsair2025 Lincoln Navigator2024 Ford Bronco Sport2024 Ford Expedition2024 Ford Explorer2024 Ford F-1502024 Ford Maverick2024 Ford Mustang2024 Lincoln Corsair2024 Lincoln NavigatorAssociated Documents - August 14, 2025•Document ID: 11021975Service Bulletin/Repair InstructionsUNKNOWN OR OTHER; VISIBILITY/WIPER
- Mfr Comm. #:
- SSM 54137
- Date Added:
- August 19, 2025
- Manufacturer:
- FORD
SummaryVarious 2021-2025 Ford and Lincoln vehicles equipped with the rear camera on demand feature may exhibit "Please Check Surroundings For Safety" or "Full View Not Available" messages when the rear camera button is pressed and the vehicle is not in reverse. Inform customers this condition is considered normal operation and does not affect vehicle durability because the full rear view camera image can only be shown when the vehicle is in reverse. No additional diagnosis or service is required for this condition.
Associated Products (56)2025 Ford Bronco Sport2025 Ford Escape2025 Ford Expedition2025 Ford Explorer2025 Ford F-1502025 Ford Maverick2025 Ford Ranger2025 Ford Transit2025 Lincoln Aviator2025 Lincoln Corsair2025 Lincoln Navigator2024 Ford Bronco Sport2024 Ford Edge2024 Ford Escape2024 Ford Expedition2024 Ford Explorer2024 Ford F-1502024 Ford Maverick2024 Ford Ranger2024 Ford Transit+ 36 moreAssociated Documents - August 1, 2025•Document ID: 11021704Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- SSM 54102
- Date Added:
- August 7, 2025
- Manufacturer:
- FORD
SummarySome 2025 Ranger vehicles equipped with a 2.3/2.7L EcoBoost engine built on or before 12-June-2025 and 2025 Ranger Raptor vehicles equipped with a 3.0L EcoBoost engine built on or before 18-June-2025 may exhibit various illuminated brake system warning lamps/fault messages at start up with diagnostic trouble codes (DTCs) C003A:4A, C003A:64, C0037:4A, C0037:64, C2005:1D, C2005:78, C2006:1D, and/or C2006:78 stored in the anti-lock brake system (ABS) module. To correct this condition, reprogram the ABS module using the latest software level of the Ford Diagnosis and Repair System (FDRS). For claiming, use causal part 2005 and labor operations 2219D and 2219D44 in Section 02 of the Service Labor Time Standards (SLTS) Manual.
Associated Products (1)Associated Documents - August 1, 2025•Document ID: 11021703Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- SSM 54101
- Date Added:
- August 7, 2025
- Manufacturer:
- FORD
SummarySome 2025 Ranger vehicles equipped with a 2.3/2.7L EcoBoost engine built on or before 12-June-2025 and 2025 Ranger Raptor vehicles equipped with a 3.0L EcoBoost engine built on or before 18-June-2025 may exhibit an illuminated anti-lock brake system (ABS) warning indicator with diagnostic trouble code (DTC) U3012:68 stored in the ABS module. The vehicle may also exhibit any of the following symptoms: a soft brake pedal following vehicle start-up, various brake system illuminated warning lamps and/or brake-related messages displayed in the instrument panel cluster (IPC). This may be due to a controller area network (CAN) communication concern within the ABS module. To correct this condition, reprogram the ABS module using the latest software level of the Ford Diagnosis and Repair System (FDRS). For claiming, use causal part 2005 and labor operations 2219D and 2219D44 in Section 02 of the Service Labor Time Standards (SLTS) Manual.
Associated Products (1)Associated Documents - July 29, 2025•Document ID: 11021358Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 54090
- Date Added:
- August 4, 2025
- Manufacturer:
- FORD
SummarySome 2021-2025 Ford and Lincoln vehicles equipped with SYNC4/Digital Experience may exhibit an unsuccessful telematics control unit module (TCU) software update or software activation during a universal serial bus (USB) update. This may be due to the vehicle connectivity setting being disabled.
Associated Products (45)2025 Ford Bronco2025 Ford Bronco Sport2025 Ford Escape2025 Ford Expedition2025 Ford Explorer2025 Ford F-1502025 Ford Maverick2025 Ford Mustang2025 Ford Ranger2025 Ford Transit2025 Lincoln Aviator2025 Lincoln Corsair2025 Lincoln Nautilus2025 Lincoln Navigator2024 Ford Bronco2024 Ford Edge2024 Ford Escape2024 Ford Expedition2024 Ford F-1502024 Ford Mustang+ 25 moreAssociated Documents - July 26, 2025•Document ID: 11021211OtherENGINE; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 25P20
- Date Added:
- August 2, 2025
- Manufacturer:
- FORD
SummaryCertain 2025 Model Year Bronco, Explorer, Mustang, and Ranger Vehicles Engine Coolant Temperature Sensor Replacement On all affected vehicles, the Engine Coolant Temperature sensor (ECT) may have a poor solder joint internally, causing a Diagnostic Trouble Code (DTC) to set against the sensor for an open circuit and the check engine light to illuminate
Associated Products (4)Associated Documents - July 4, 2025•Document ID: 11020410Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- SSM 54016
- Date Added:
- July 8, 2025
- Manufacturer:
- FORD
SummarySome 2021-2025 Bronco and 2024-2025 Ranger vehicles equipped with a 2.7L/3.0L EcoBoost engine may require removal of the engine front cover due to various concerns. Workshop Manual, Section 303-01 has been updated with improved engine front cover removal and installation service procedure steps including a new body removal and install step.
Associated Products (7)Associated Documents - July 3, 2025•Document ID: 11020412Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- SSM 54013
- Date Added:
- July 8, 2025
- Manufacturer:
- FORD
SummarySome 2025 Ranger vehicles may exhibit various illuminated brake system warning lamps/fault messages at start up with diagnostic trouble codes (DTCs) C003A:4A, C003A:64, C0037:4A, C0037:64, C2005:1D, C2005:78, C2006:1D, and/or C2006:78 stored in the antilock brake system (ABS) module. To correct this condition, clear the DTCs, turn the ignition off and then back on, engage and disengage the park brake and then run a self-test. If any DTCs return, refer to the Workshop Manual (WSM) for normal diagnosis. If the DTCs clear, this concern may be due to the ABS software and replacement of the ABS module or wheel speed sensors will not resolve this condition. Inform the customers they can continue to drive the vehicle and engineering is currently working on a solution for this condition that is expected in Q3 of 2025. Monitor Professional Technician System (PTS) for additional information and schedule service appointments for customers once the repair becomes available.
Associated Products (1)Associated Documents - July 2, 2025•Document ID: 11020414Service Bulletin/Repair InstructionsEXTERIOR LIGHTING
- Mfr Comm. #:
- SSM 54008
- Date Added:
- July 8, 2025
- Manufacturer:
- FORD
SummarySome 2021-2025 F-150 non-Lightning, 2023-2025 F-Super Duty, 2024-2025 Ranger, and 2025 Explorer vehicles may exhibit a perceived improper functioning fog lamp(s). Customers may describe fog lamps blinking, turning on or off, or flashing. If the vehicle is equipped with cornering lamps, this may be normal function. Under certain conditions and inputs, either lamp might turn on or off independently to aid visibility during cornering. This condition does not affect vehicle durability and no additional diagnosis or service is required for this condition at this time. For additional cornering lamp information, refer to the Owner's Manual and/or Workshop Manual (WSM), Section 417-01.
Associated Products (8)Associated Documents - June 25, 2025•Document ID: 11020050Service Bulletin/Repair InstructionsSTRUCTURE:BODY; POWER TRAIN
- Mfr Comm. #:
- SSM 53979
- Date Added:
- July 2, 2025
- Manufacturer:
- FORD
SummarySome 2024-2025 Ranger vehicles may exhibit a "Check Charging System" message displayed in the instrument panel cluster (IPC) with diagnostic trouble codes (DTC) U012D, U0284, and/or U042E stored in the powertrain control module (PCM). This may be due to corrosion found in the active grille shutter lower connector (C1767). If no corrosion is found in this connector, refer to the Workshop Manual (WSM), Section 414-00 for normal diagnostics. If corrosion is found, replace the connector and active grille shutter (AGS) actuator (base part number: 10884). To aid in engineering investigation, when removing the corroded connector cut the wires about 3 inches (76 mm) from the connector to ensure adequate wire is left for analysis. If the corrosion condition is encountered, use the "Submit Global Concern Report (GCR)" link at the upper right of the Vehicle ID tab to submit a report and reference this article number in the report. For claiming, use causal part 14290 and labor operations 12650D, 12650D45, 12650D45WR, 12650D78LW, 12650D78BU, 12650D78CM, and/or 12650D78TD in Section 10 of the Service Labor Time Stand
Associated Products (2)Associated Documents - June 25, 2025•Document ID: 11020044Service Bulletin/Repair InstructionsPOWER TRAIN; ENGINE
- Mfr Comm. #:
- SSM 53973
- Date Added:
- July 2, 2025
- Manufacturer:
- FORD
SummarySome 2021-2024 Edge/Nautilus, 2021-2025 Bronco/Bronco Sport/E-Series/Escape/Corsair/Expedition/Navigator/Explorer/Aviator/F-150/F-Super Duty/Mustang/Ranger, and 2022-2025 Maverick vehicles may require an A/C compressor clutch assembly replacement be performed for various concerns. Workshop Manual (WSM), Section 412-00 Removal and Installation has been updated to eliminate the need to remove and install the A/C compressor to change out the A/C Compressor clutch assembly.
Associated Products (76)2025 Ford Bronco2025 Ford Bronco Sport2025 Ford E-3502025 Ford E-4502025 Ford Escape2025 Ford Expedition2025 Ford Explorer2025 Ford F-1502025 Ford Maverick2025 Ford Mustang2025 Ford Ranger2025 Lincoln Aviator2025 Lincoln Corsair2024 Ford Bronco2024 Ford Bronco Sport2024 Ford E-3502024 Ford E-4502024 Ford Edge2024 Ford Escape2024 Ford Expedition+ 56 moreAssociated Documents - June 25, 2025•Document ID: 11020041Service Bulletin/Repair InstructionsPOWER TRAIN; ENGINE
- Mfr Comm. #:
- SSM 53971
- Date Added:
- July 2, 2025
- Manufacturer:
- FORD
SummarySome 2023-2025 Escape vehicles equipped with a 1.5L/2.0L EcoBoost engine, 2023-2025 Corsair vehicles equipped with a 2.0L EcoBoost engine, 2024-2025 Nautilus vehicles equipped with a 2.0L EcoBoost engine, 2024-2025 Mustang vehicles with a 2.3L EcoBoost engine, and 2025 Bronco/Explorer/Ranger vehicles equipped with a 2.3L EcoBoost engine may exhibit an engine misfire condition with diagnostic trouble codes (DTC) P0301, P0302, P0303 and/or P0304 set in the powertrain control module (PCM). This may be due to the spark plugs and/or ignition coils. To correct the condition, refer to Workshop Manual (WSM), Section 303-07 for normal diagnostics.
Associated Products (13)Associated Documents - June 20, 2025•Document ID: 11019710Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; STEERING
- Mfr Comm. #:
- SSM 53961
- Date Added:
- June 25, 2025
- Manufacturer:
- FORD
SummarySome 2025 Ranger vehicles may exhibit a turn signal fast flash on the instrument panel cluster (IPC) while outside turn signals operate properly.
Associated Products (1)Associated Documents - June 4, 2025•Document ID: 11019491Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- SSM 53875
- Date Added:
- June 11, 2025
- Manufacturer:
- FORD
SummarySome 2025 Bronco and Ranger vehicles may exhibit various illuminated brake system warning lamps/fault messages at start up with diagnostic trouble codes (DTCs) C003A:4A, C003A:64, C0037:4A, C0037:64, C2005:1D, C2005:78, C2006:1D, and/or C2006:78 stored in the antilock brake system (ABS) module. To correct this condition, clear the DTCs, turn the ignition off and then back on, engage and disengage the park brake and then run a self-test. If any DTCs return, refer to the Workshop Manual (WSM) for normal diagnosis. If the DTCs clear, this concern may be due to the ABS software and replacement of the ABS module or wheel speed sensors will not resolve this condition. Inform the customers they can continue to drive the vehicle and engineering is currently working on a solution for this condition that is expected in Q3 of 2025. Monitor Professional Technician System (PTS) for additional information and schedule service appointments for customers once the repair becomes available.
Associated Products (2)Associated Documents - May 30, 2025•Document ID: 11018779Service Bulletin/Repair InstructionsVEHICLE SPEED CONTROL
- Mfr Comm. #:
- SSM 53861
- Date Added:
- June 2, 2025
- Manufacturer:
- FORD
SummarySome 2025 Ranger vehicles may exhibit an illuminated anti-lock brake system (ABS) warning indicator with diagnostic trouble code (DTC) U3012:68 stored in the ABS module. The vehicle may also exhibit any of the following symptoms: a soft brake pedal following vehicle start-up, various brake system illuminated warning lamps and/or brake-related messages displayed in the instrument panel cluster (IPC).
Associated Products (1)Associated Documents - May 22, 2025•Document ID: 11018595Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- SSM 53822
- Date Added:
- May 28, 2025
- Manufacturer:
- FORD
SummaryWhen replacing the rear leaf spring assemblies on 2024-2025 Ranger vehicles built on and before 28-Apr-2025, if the vehicle was equipped with composite leaf springs, replacement of both the driver side and passenger side with steel leaf springs will be necessary.
Associated Products (2)Associated Documents - May 20, 2025•Document ID: 11018591Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- SSM 53813
- Date Added:
- May 27, 2025
- Manufacturer:
- FORD
SummarySome 2024-2025 Ranger vehicles may exhibit a difficult to cycle glove compartment lock using the key. To correct this condition, insert the key into the glove compartment lock cylinder and cycle the key clockwise from the 12 o'clock position (unlocked) to the 3 o'clock position (locked) and then back to the 12 o'clock position (unlocked), 5 times. Extra force may be required during the initial clockwise key turn from the 12 o'clock position to the 3 o'clock position. This extra force will set the lock into the correct position and optimize turning efforts. For claiming, use causal part 60060T10 and claim M-time.
Associated Products (2)Associated Documents