Ford F-600 Service Bulletins (2023)
59 manufacturer communications on file.
- April 5, 2024•Document ID: 10253556Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- SSM 52420
- Date Added:
- April 25, 2024
- Manufacturer:
- FORD
SummarySome 2023-2024 F-Super Duty vehicles may exhibit an illuminated powertrain malfunction (wrench) indicator with diagnostic trouble codes (DTC) P2122, P2123, P2127, P2128, and/or P2138 stored in the powertrain control module (PCM). The vehicle may or may not exhibit a perceived lack of power intermittently. Perform a wiggle test of connector C1580 at the left rear of the engine compartment while the engine is at normal operating temperature. Perform a visual inspection of pins 18 through 29 as well as a terminal fit test using the appropriately sized flex probe. Repair as necessary. Refer to Wiring Diagram Cell 005. If no concerns are found, refer to Workshop Manual (WSM), Section 310-02 for normal diagnostics.
Associated Products (14)Associated Documents - March 26, 2024•Document ID: 10252647Service Bulletin/Repair InstructionsPOWER TRAIN:MANUAL TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
- Mfr Comm. #:
- SSM 52389
- Date Added:
- April 4, 2024
- Manufacturer:
- FORD
SummarySome 2022-2024 F-Super Duty vehicles equipped with a 6.7L engine may exhibit an illuminated malfunction indicator lamp (MIL) with only diagnostic trouble code (DTC) U3012 stored in the PCM. If no drivability concerns or other DTCs are present, perform normal diagnostics per the Workshop Manual (WSM). If diagnostics lead to the powertrain control module (PCM) or body control module (BCM), the replacement of the PCM and/or the BCM will not resolve this concern. This illuminated MIL with DTC U3012 does not affect vehicle durability and no additional diagnosis or service is required for this condition at this time. Inform customers that they can continue to drive the vehicle and engineering is currently working on a solution for this condition. Monitor OASIS for additional information and schedule service appointments for customers once the repair becomes available.
Associated Products (21)2024 Ford F-2502024 Ford F-3502024 Ford F-4502024 Ford F-5502024 Ford F-6002024 Ford F-6502024 Ford F-7502023 Ford F-2502023 Ford F-3502023 Ford F-4502023 Ford F-5502023 Ford F-6002023 Ford F-6502023 Ford F-7502022 Ford F-2502022 Ford F-3502022 Ford F-4502022 Ford F-5502022 Ford F-6002022 Ford F-650+ 1 moreAssociated Documents - March 15, 2024•Document ID: 10252627Service Bulletin/Repair InstructionsTRAILER HITCHES
- Mfr Comm. #:
- SSM 52363
- Date Added:
- April 4, 2024
- Manufacturer:
- FORD
SummarySome 2023-2024 F-Super Duty vehicles equipped with a trailer brake control module may exhibit a Trailer Disconnected message after cycling the ignition off and back on with a trailer connected. This may be due to the presence of an integrated battery charger on a trailer equipped with electric over hydraulic brakes. If trailer functionality is restored after unplugging and plugging the trailer connector back in while the ignition is on, this condition can be corrected by downloading and performing the Trailer Brake Configuration application using the latest version of the Ford Diagnosis and Repair System (FDRS) diagnostic scan tool. For claiming, use causal part 19H332 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Associated Products (14)Associated Documents - March 14, 2024•Document ID: 10252626Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- SSM 52357
- Date Added:
- April 4, 2024
- Manufacturer:
- FORD
SummarySome 2021-2024 Bronco Sport vehicles equipped with a 1.5L EcoBoost engine may exhibit water coolant pump leaks. This may be due to contamination in the coolant system. To correct this condition and prevent recurrent water pump failures, perform a coolant system flush. Refer to the Workshop Manual (WSM), Section 303-03A Engine Cooling - 1.5L EcoBoost > General Procedures > Engine Cooling System Flushing > Steps 1-8. Then replace the coolant pump. Refer to the WSM, Section Engine Cooling - 1.5L EcoBoost > Removal and Installation. Fill and bleed the coolant system properly. Refer to the WSM, Section 303-03A Engine Cooling - 1.5L EcoBoost > General Procedures > Engine Cooling System Draining, Vacuum Filling and Bleeding. Note: Repeat steps 10-12 a total of 10 times to remove any remaining air trapped in the system.
Associated Products (18)Associated Documents - March 12, 2024•Document ID: 10252546Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
- Mfr Comm. #:
- TSB 24-2066
- Date Added:
- April 3, 2024
- Manufacturer:
- FORD
SummaryThis TSB supersedes article 24-2036 to update the vehicles affected. Some 2023-2024 F-Super Duty pickup vehicles built on or before 02-Jan-2024 equipped with a 6.7L engine may exhibit an illuminated MIL with diagnostic trouble codes (DTC) P0133, P0139, and/or P0145 stored in the powertrain control module (PCM). This may be due to the software in the PCM and does not affect vehicle operation.
Associated Products (14)Associated Documents - March 8, 2024•Document ID: 10251956Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- SSM 52345
- Date Added:
- March 20, 2024
- Manufacturer:
- FORD
SummarySome 2022-2024 various Ford/Lincoln vehicles equipped with SYNC 4 may experience concern where customers are receiving an error message when trying to enroll in connected services. This may be due to the gateway module (GWM) software. To correct the concern, download and run the Transport and Factory Mode Deactivation app: under HS1 modules select BCM > Transport and Factory Mode > Download > Run. When the pop-up message appears for Change Vehicle Mode - Transport/Factory/Normal Mode, press OK. This will proceed to the Transport and Factory Mode Deactivation screen, select Unlock Vehicle Connectivity Settings (21 MY + Vehicles). A pop-up message appears noting Vehicle Is Now In Normal Mode, select OK. This will return to the Transport and Factory Mode Deactivation screen, select Exit. A final pop-up notification stating that the application is finished, select OK. For claiming, use causal part 14G490 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Associated Products (43)2024 Ford Bronco2024 Ford Edge2024 Ford Escape2024 Ford Expedition2024 Ford F-1502024 Ford F-2502024 Ford F-3502024 Ford F-4502024 Ford F-5502024 Ford F-6002024 Ford F-6502024 Ford F-7502024 Ford Mustang2024 Ford Mustang Mach-E2024 Ford Ranger2024 Ford Transit2024 Lincoln Corsair2024 Lincoln Navigator2023 Ford Bronco2023 Ford Edge+ 23 moreAssociated Documents - March 6, 2024•Document ID: 10251952Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- SSM 52335
- Date Added:
- March 20, 2024
- Manufacturer:
- FORD
SummaryFor 2015-2024 Ford and Lincoln vehicles equipped with turbocharged engines and customer concern of an engine oil leak, refer to Workshop Manual (WSM), Section 303-00 for oil leak inspection and testing methods. Ford has evaluated turbochargers replaced for oil leak symptoms and although oil may collect on the external surface of a turbocharger, it is extremely rare for a turbocharger assembly to be the root cause of the oil leak. Careful inspection of the turbocharger oil feed and drain tubes should be performed along with the recommended WSM procedures as needed. Warranty claims for turbocharger replacement going forward will be assessed.
Associated Products (211)2024 Ford Bronco2024 Ford Bronco Sport2024 Ford Edge2024 Ford Escape2024 Ford Expedition2024 Ford Explorer2024 Ford F-1502024 Ford F-2502024 Ford F-3502024 Ford F-4502024 Ford F-5502024 Ford F-6002024 Ford F-6502024 Ford F-7502024 Ford Maverick2024 Ford Mustang2024 Ford Ranger2024 Ford Transit2024 Lincoln Aviator2024 Lincoln Corsair+ 191 moreAssociated Documents - March 6, 2024•Document ID: 10251950Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:BODY CONTROL MODULE/BCM
- Mfr Comm. #:
- SSM 52333
- Date Added:
- March 20, 2024
- Manufacturer:
- FORD
SummaryMany body control module C (BCMC) warranty return parts are coming back with no trouble found. To verify that the BCMC is at fault prior to replacing, perform the following. First, disconnect the battery then check all BCMC connectors for terminal pushout, pin damage, spread terminals, and corrosion. Refer to Workshop Manual Section 100-00 Wire Terminal Inspection and Replacement. If none found, reconnect the BCMC and battery terminals then recheck functionality. If concern still exists, proceed with BCMC replacement.
Associated Products (15)Associated Documents - March 4, 2024•Document ID: 10251947Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:INFOTAINMENT:SOFTWARE; EQUIPMENT:ELECTRICAL:INFOTAINMENT
- Mfr Comm. #:
- SSM 52328
- Date Added:
- March 20, 2024
- Manufacturer:
- FORD
SummarySome 2021-2024 Bronco/F-150, 2023-2024 Escape/F-Super Duty vehicles equipped with SYNC 4 may experience a concern during accessory protocol interface module (APIM) programming where the vehicle's center display screen indicates USB Error. This may be due to a lack of memory space available to perform the APIM software update. If it is a memory concern, the Ford Diagnosis and Repair System (FDRS) will provide an option to delete the voice application. Re-enter the module programming and when prompted, do not select first option - SYNC Module (APIM) Software Update, select the second option - Delete Voice Application(s) From Module. Once deleted, run the SYNC Module (APIM) Software Update as directed, this will update the software and automatically reload the voice app. If the voice delete option is not available, continue with normal diagnostics in the Workshop Manual, Section 418.
Associated Products (24)2024 Ford Bronco2024 Ford Escape2024 Ford F-1502024 Ford F-2502024 Ford F-3502024 Ford F-4502024 Ford F-5502024 Ford F-6002024 Ford F-6502024 Ford F-7502023 Ford Bronco2023 Ford Escape2023 Ford F-1502023 Ford F-2502023 Ford F-3502023 Ford F-4502023 Ford F-5502023 Ford F-6002023 Ford F-6502023 Ford F-750+ 4 moreAssociated Documents - March 1, 2024•Document ID: 10251937Service Bulletin/Repair InstructionsUNKNOWN OR OTHER; ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:KEY/SENDER
- Mfr Comm. #:
- SSM 52317
- Date Added:
- March 20, 2024
- Manufacturer:
- FORD
Summary2023 F-Super Duty, 2023-2024 Expedition, 2024 Nautilus/F-150 vehicles will exhibit no light emitting diode (LED) confirmation from the key fob indicating that the vehicle has remote started (or not remote started). Factory key fobs with remote start no longer contain a LED feedback indicator. Do not replace the key fob for this condition. This is a normal operating characteristic and no service action is necessary.
Associated Products (10)Associated Documents - March 1, 2024•Document ID: 10251934Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- SSM 52314
- Date Added:
- March 20, 2024
- Manufacturer:
- FORD
SummaryDuring service and repair requiring removal and replacement of a crankshaft bolt and/or crankshaft damper, achieving proper torque of the crankshaft pulley bolt is critical. Incorrect torque may allow the bolt to loosen resulting in the timing gear breaking and engine damage. Replacement of the bolt is critical to the repair and accurately following the installation procedure in the Workshop Manual (WSM) Section, 303-01 is extremely important. The bolt torque procedure can be found in the crankshaft front seal removal and installation procedure or in the engine assembly procedure.
Associated Products (232)2024 Ford Bronco2024 Ford Bronco Sport2024 Ford E-3502024 Ford E-4502024 Ford Edge2024 Ford Escape2024 Ford Expedition2024 Ford Explorer2024 Ford F-1502024 Ford F-2502024 Ford F-3502024 Ford F-4502024 Ford F-5502024 Ford F-6002024 Ford F-6502024 Ford F-7502024 Ford Maverick2024 Ford Mustang2024 Ford Transit2024 Lincoln Aviator+ 212 moreAssociated Documents - February 29, 2024•Document ID: 10250854Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- SSM 52308
- Date Added:
- March 5, 2024
- Manufacturer:
- FORD
SummarySome 2022 F-Super Duty vehicles equipped with a 12.3 inch center display screen and 2023-2024 F-Super Duty vehicles may exhibit DTCs B1D08:11 and/or B1D09:11 stored in the trailer module (TRM) with a Trailer Brake System Fault See Manual message in the instrument panel cluster (IPC) when a trailer is not connected to the vehicle. This may be due to water intrusion at the back side of the trailer tow connector. Inspect connector C4099 and the trailer tow connector (14489) for signs of corrosion or damage. If corrosion or damage is present at either connector, replace the female side of the C4099 connector using service pig tail kit (3U2Z-14S411-JXC) and the trailer tow connector. If corrosion or damage is not present, refer to the Workshop Manual (WSM) Section 417-01 Exterior Lighting, Diagnosis and Testing for additional diagnosis. For claiming, use causal part 14489 and applicable labor operations in Section 01 of the Service Labor Time Standards (SLTS) Manual.
Associated Products (19)Associated Documents - February 27, 2024•Document ID: 10250850Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); POWER TRAIN
- Mfr Comm. #:
- SSM 52299
- Date Added:
- March 5, 2024
- Manufacturer:
- FORD
SummarySome 2023-2024 F-Super Duty vehicles equipped with a 6.7L engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) U02A2, P206B, P203B, P208A, P20FA, P20FD, and/or P20FC stored in the powertrain control module (PCM). Before performing normal diagnostics, inspect connectors C1273C (32 pin) and C406 (14 pin) for proper connection. Also disconnect and inspect C1415 (32 pin), C406 (14 pin), C4863 (7 pin) and C4864 (5 pin) on the 14405 vehicle harness for signs of terminal push out, water intrusion and/or corrosion. Refer to the Wiring Diagram for connector locations. Repair as necessary. Refer to Wiring Diagram Cell 005 for repair procedures.
Associated Products (12)Associated Documents - February 22, 2024•Document ID: 10251257Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 24B05
- Date Added:
- March 5, 2024
- Manufacturer:
- FORD
SummaryCertain 2023 Model Year Super Duty and Transit Vehicles Equipped with 10R Transmissions - Main Control Assembly Bolt Inspection
Associated Products (8)Associated Documents - February 16, 2024•Document ID: 10250528Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC; EQUIPMENT:ELECTRICAL:INFOTAINMENT; EQUIPMENT:ELECTRICAL:INFOTAINMENT:SOFTWARE
- Mfr Comm. #:
- SSM 52271
- Date Added:
- February 23, 2024
- Manufacturer:
- FORD
SummarySome 2023 F-Super Duty vehicles equipped with a 12 inch center display screen and driver assistance package DBCAY (minor feature code) may exhibit the brakes applying without brake pedal input during parking lot type driving below 5 mph (8 km/h). To confirm a vehicle is built with a certain minor feature code, review the build information by double-clicking the vehicle identification number (VIN) in the upper left corner in the Professional Technician System (PTS) OASIS report. This may be due to the Front Brake Assist feature of the vehicle. If the customer finds this feature too sensitive, it can be turned off in the vehicle's center display screen in the Features > Driver Assistance menu. This feature is unrelated to the Pre-Collision Assist feature of the vehicle. To disable the pop-up message that Front Brake Assist is off every time the vehicle is restarted and permanently disable the feature, download and perform the IPMA - Image Processing Module A (IPMA) Configuration application using the latest version of the Ford Diagnosis and Repair System (FDRS) diagnostic scan tool. For claiming, use caus
Associated Products (7)Associated Documents - January 26, 2024•Document ID: 10249432Service Bulletin/Repair InstructionsUNKNOWN OR OTHER; ELECTRICAL SYSTEM:BODY CONTROL MODULE:SOFTWARE
- Mfr Comm. #:
- SSM 52213
- Date Added:
- January 30, 2024
- Manufacturer:
- FORD
SummarySome 2022-2023 F-150 and 2023 F-Super Duty vehicles equipped with a direct current/alternating current converter module A (DCACA) inverter (minor feature code HUKAK) may exhibit a Please Contact Authorized Dealer For Service message in the center display screen with DTC P0A93:96 stored in the DCACA. This may be due to the software level of the DCACA and has no effect on vehicle operation. To confirm a vehicle is built with a certain minor feature code, review the build information by double-clicking the vehicle identification number (VIN) in the upper left corner in the Professional Technician System (PTS). To correct this condition, reprogram the DCACA to the latest software level using the latest version of the Ford Diagnosis and Repair System (FDRS) scan tool. For claiming, use causal part 19G317 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Associated Products (9)Associated Documents - January 19, 2024•Document ID: 10249178Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- SSM 52192
- Date Added:
- January 24, 2024
- Manufacturer:
- FORD
SummarySome 2023-2024 F-Super Duty vehicles equipped with a 6.7L engine may require fuel injector removal and replacement for various reasons. Fuel injector o-ring and supply tube kits LC3Z-9229-A and LC3Z-9229-B for 2020-2022 F-Super Duty vehicles should be utilized when instructed to replace these parts in Workshop Manual, Section 303-04. The parts catalog is in the process of being updated.
Associated Products (12)Associated Documents - January 18, 2024•Document ID: 10249175Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- SSM 52188
- Date Added:
- January 24, 2024
- Manufacturer:
- FORD
Summary2024 F-Super Duty vehicles are equipped with XL-22 (WSS-M2C184-A1) high temperature power steering fluid that looks like clear hydraulic fluid. This fluid is an improvement in high temperature and thermal oxidative stability compared to Mercon LV. This power steering fluid is also compatible and highly recommended to use when filling or topping off power steering systems of all 2012-2023 F-Super Duty vehicles originally equipped with Mercon LV.
Associated Products (82)2024 Ford F-2502024 Ford F-3502024 Ford F-4502024 Ford F-6502024 Ford F-7502023 Ford F-2502023 Ford F-3502023 Ford F-4502023 Ford F-5502023 Ford F-6002023 Ford F-6502023 Ford F-7502022 Ford F-2502022 Ford F-3502022 Ford F-4502022 Ford F-5502022 Ford F-6002022 Ford F-6502022 Ford F-7502021 Ford F-250+ 62 moreAssociated Documents - December 20, 2023•Document ID: 10248367Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- TSB 23-2426
- Date Added:
- January 5, 2024
- Manufacturer:
- FORD
SummarySome 2023 F-Super Duty chassis cab vehicles equipped with a 6.7L engine may exhibit an engine coolant temperature gauge reading at the high end of the normal range while towing in high ambient temperatures with no diagnostic trouble codes (DTC) stored in the powertrain control module (PCM) or warning messages present in the instrument panel cluster (IPC). This may be due to the software in the IPC.
Associated Products (7)Associated Documents - December 20, 2023•Document ID: 10248060Service Bulletin/Repair InstructionsSERVICE BRAKES; EQUIPMENT:ELECTRICAL:INFOTAINMENT:SOFTWARE; EQUIPMENT:ELECTRICAL:INFOTAINMENT
- Mfr Comm. #:
- SSM 52147
- Date Added:
- January 2, 2024
- Manufacturer:
- FORD
SummarySome 2023 F-Super Duty vehicles equipped with a 12 inch center display screen and driver assistance package DBCAY (minor feature code) may exhibit the brakes applying without brake pedal input during parking lot type driving below 5 mph (8 km/h). To confirm a vehicle is built with a certain minor feature code, review the build information by double-clicking the vehicle identification number (VIN) in the upper left corner in the Professional Technician System (PTS) OASIS report. This may be due to the Front Brake Assist feature of the vehicle. If the customer finds this feature too sensitive, it can be turned off in the vehicle's center display screen in the Features > Driver Assistance menu. This feature is unrelated to the Pre-Collision Assist feature of the vehicle. To disable the pop-up message that Front Brake Assist is off every time the vehicle is restarted and permanently disable the feature, download and perform the IPMA - Image Processing Module A (IPMA) Configuration application using the latest version of the Ford Diagnosis and Repair System (FDRS) diagnostic scan tool. For claiming, use caus
Associated Products (7)Associated Documents