Ford Ranger Service Bulletins
244 manufacturer communications on file.
- January 16, 2023•Document ID: 10230773Service Bulletin/Repair InstructionsPOWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
- Mfr Comm. #:
- TSB 23-2011
- Date Added:
- January 31, 2023
- Manufacturer:
- FORD
SummarySome 2019-2022 Ranger vehicles may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P0300, P0301, P0302, P0303, P0304 and/or P0316 stored in the powertrain control module (PCM). This may be due to water build up in the spark plug well(s) which can lead to signs of corrosion on ignition system components. To correct the condition, follow the Service Procedure to resolve the source of all DTCs and to install an engine appearance cover.
Associated Products (2)Associated Documents - December 23, 2022•Document ID: 10228884Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 51279
- Date Added:
- January 6, 2023
- Manufacturer:
- FORD
SummarySome 2021-2023 F-150, 2021-2022 F-Super Duty, 2021-2023 Ranger customers may have concerns including, but not limited to: no power to the distribution box, rear camera inoperative, rear park assist inoperative, box lights inoperative, power up/down tailgate inoperative, unable to open tailgate by tailgate switch, and no tailgate ajar message when the tailgate is ajar. These concerns may be caused by faulty connections between the pickup bed, tailgate, rear lamp assemblies, or bumper where connectors are disconnected, damaged, or coated with bedliner. Prior to performing any warranty diagnosis or repairs, verify if the vehicle had an aftermarket spray-in-bedliner. Any repairs resulting from aftermarket products/installation, including but not limited to a spray-in bedliner, are not covered under warranty.
Associated Products (5)Associated Documents - December 19, 2022•Document ID: 10228880Service Bulletin/Repair InstructionsSTRUCTURE:BODY:DOOR; BACK OVER PREVENTION
- Mfr Comm. #:
- SSM 51263
- Date Added:
- January 6, 2023
- Manufacturer:
- FORD
SummarySome 2015-2023 F-150, 2017-2022 F-Super Duty, and 2019-2023 Ranger vehicles may exhibit dust ingress into the cabin through the doors or air extractors. This may be due to the climate control system being in recirculation mode as a result of the recirculation button being on or automatic strategies for heating/cooling efficiency. To minimize dust ingress when driving in off-road or secondary road conditions, make sure that all doors and windows are fully closed and the climate control system is switched to defrost on and the instrument panel and footwell air vents are switched to off. Temperature and fan settings may be adjusted as desired. Alternatively, max defrost can be activated which will adjust all settings automatically. Operating in defrost mode will keep constant air flow through the rear air extractors and other small areas, helping minimize dust ingress.
Associated Products (6)Associated Documents - December 16, 2022•Document ID: 10228876Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- SSM 51261
- Date Added:
- January 6, 2023
- Manufacturer:
- FORD
SummarySome Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00.
Associated Products (41)2023 Ford Bronco2023 Ford Bronco Sport2023 Ford E-3502023 Ford Expedition2023 Ford Explorer2023 Ford F-1502023 Ford Maverick2023 Ford Mustang2023 Ford Ranger2023 Ford Transit2023 Lincoln Aviator2023 Lincoln Navigator2022 Ford Bronco2022 Ford Bronco Sport2022 Ford E-3502022 Ford Edge2022 Ford Escape2022 Ford Expedition2022 Ford Explorer2022 Ford F-150+ 21 moreAssociated Documents - December 8, 2022•Document ID: 10228855Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- SSM 51239
- Date Added:
- January 5, 2023
- Manufacturer:
- FORD
SummarySome 2019-2022 Ranger vehicles not equipped with an engine appearance cover may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P0300, P0301, P0302, P0303, P0304 and/or P0316 stored in the powertrain control module (PCM). This may be due to water build up in the spark plug well(s) which can lead to signs of corrosion on ignition system components. To prevent reoccurrence, an engine appearance cover must be installed on the vehicle. Currently, the engine cover (SPN: L1MZ-6A949-A) is not available to order and a new engine cover kit is being released. Repair the vehicle by replacing suspect ignition system components and schedule an appointment with the customer to have an engine cover installed when the engine cover kit becomes available in April 2023. Monitor OASIS for updates
Associated Products (2)Associated Documents - December 1, 2022•Document ID: 10228846Service Bulletin/Repair InstructionsCOMMUNICATION:MANUFACTURER TELEMATICS
- Mfr Comm. #:
- SSM 51228
- Date Added:
- January 5, 2023
- Manufacturer:
- LINCOLN
SummarySome 2020-2023 Ford and Lincoln vehicles equipped with a telematic control unit (TCU) may exhibit inoperative remote features via Ford Pass/Lincoln Way mobile app, incomplete user authorization, and/or modem electronic serial number (ESN) could not be displayed in the center display screen. To correct this condition prior to programming, remove the TCU fuse for 5-minutes then reinstall. Delete all previous session files for the vehicle. Start a new Ford Diagnosis and Repair System (FDRS) session. Perform a TCU provisioning and Program the TCU to the latest FDRS version level. If the concern is still present, follow normal diagnostics in Workshop Manual (WSM), Section 415-00. Refer to PTS OASIS home page for TCU version identification. For claiming, use causal part 14G229 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Associated Products (22)2023 Lincoln Aviator2022 Ford Bronco Sport2022 Ford Escape2022 Ford Explorer2022 Ford Maverick2022 Ford Mustang2022 Ford Ranger2022 Ford Transit2022 Ford Transit Connect2022 Lincoln Aviator2022 Lincoln Corsair2021 Ford Bronco Sport2021 Ford Escape2021 Ford Expedition2021 Ford Explorer2021 Ford Mustang2021 Ford Ranger2021 Ford Transit2021 Ford Transit Connect2021 Lincoln Aviator+ 2 moreAssociated Documents - October 13, 2022•Document ID: 10224334Service Bulletin/Repair InstructionsUNKNOWN OR OTHER; COMMUNICATION:MANUFACTURER TELEMATICS
- Mfr Comm. #:
- SSM 51131
- Date Added:
- October 19, 2022
- Manufacturer:
- LINCOLN
SummarySome 2020-2022 Ford and Lincoln vehicles equipped with a telematic control unit (TCU) may exhibit inoperative remote features via Ford Pass/Lincoln Way mobile app, incomplete user authorization, and/or modem electronic serial number (ESN) could not be displayed in the center display screen. To correct this condition prior to programming, remove the TCU fuse for 5-minutes then reinstall. Delete all previous session files for the vehicle. Start a new Ford Diagnosis and Repair System (FDRS) session. Perform a TCU provisioning and Program the TCU to the latest FDRS version level. If the concern is still present, follow normal diagnostics in Workshop Manual (WSM), Section 415-00. Refer to PTS OASIS home page for TCU version identification. For claiming, use causal part 14G229 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Associated Products (22)2023 Lincoln Aviator2022 Ford Bronco Sport2022 Ford Escape2022 Ford Explorer2022 Ford Maverick2022 Ford Mustang2022 Ford Ranger2022 Ford Transit2022 Ford Transit Connect2022 Lincoln Aviator2022 Lincoln Corsair2021 Ford Bronco Sport2021 Ford Escape2021 Ford Expedition2021 Ford Explorer2021 Ford Mustang2021 Ford Ranger2021 Ford Transit2021 Ford Transit Connect2021 Lincoln Aviator+ 2 moreAssociated Documents - October 6, 2022•Document ID: 10222788Service Bulletin/Repair InstructionsSERVICE BRAKES, HYDRAULIC
- Mfr Comm. #:
- SSM 51120
- Date Added:
- October 11, 2022
- Manufacturer:
- FORD
SummarySome Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00.
Associated Products (31)2022 Ford Bronco2022 Ford Bronco Sport2022 Ford E-3502022 Ford E-4502022 Ford Edge2022 Ford Escape2022 Ford Expedition2022 Ford Explorer2022 Ford F-1502022 Ford GT2022 Ford Maverick2022 Ford Mustang2022 Ford Ranger2022 Ford Transit2022 Ford Transit Connect2022 Lincoln Aviator2022 Lincoln Corsair2022 Lincoln Nautilus2022 Lincoln Navigator2021 Ford Bronco+ 11 moreAssociated Documents - September 5, 2022•Document ID: 10220379Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; POWER TRAIN
- Mfr Comm. #:
- TSB 22-2339
- Date Added:
- September 23, 2022
- Manufacturer:
- FORD
SummarySome 2018-2021 Expedition/Navigator, 2018-2020 F-150/Mustang and 2019-2021 Ranger vehicles equipped with a 10R80 automatic transmission may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P163E stored in the powertrain control module (PCM) or transmission control module (TCM) after replacing the main control valve body. This may be due to software incompatibility between the replacement main control valve body solenoid strategy file and the PCM/TCM software. To correct this condition, follow the Service Procedure to enter only the 13-digit solenoid body strategy when downloading transmission strategy.
Associated Products (4)Associated Documents - August 24, 2022•Document ID: 10218921Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- SSM 51051
- Date Added:
- August 30, 2022
- Manufacturer:
- FORD
SummarySome 2019-2022 Ranger vehicles (equipped without an engine appearance cover) may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P0300, P0301, P0302, P0303, P0304 and/or P0316 stored in the powertrain control module (PCM). This may be due to water build up in the spark plug well(s) which can lead to signs of corrosion on ignition system components. To prevent reoccurrence, an engine appearance cover must be installed on the vehicle. Currently, the engine cover (SPN: L1MZ-6A949-A) is not available to order and a new engine cover kit is being released. Repair the vehicle by replacing suspect ignition system components and schedule an appointment with the customer to have an engine cover installed when the engine cover kit becomes available in November 2022. Monitor OASIS for updates
Associated Products (2)Associated Documents - July 29, 2022•Document ID: 10217028Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 50975
- Date Added:
- August 2, 2022
- Manufacturer:
- FORD
SummarySome 2017-2022 Ford/Lincoln customers may experience a notification in the FordPassÃÂÃÂÃÂî/LincolnWayÃÂÃÂÃÂî app indicating Vehicle Has Entered Deep Sleep Mode. This occurs when the vehicle has not been started for 14 consecutive days, battery voltage is at/below 9.5 volts or the body control module (BCM) 12 volt battery state of charge (SOC) drops below 50%. A warning may also set if the telematic control unit (TCU) has received an over the air update. The TCU powers down all communication when in this mode and app features are disabled. Manually start the vehicle to wake if from mode. More information is located in the app under: Account > Help > search 'Deep Sleep' in the entry box. If the condition remains, check the BCM 12v SOC. If the SOC does not change after charging the battery or after BMS reset is performed, continue with normal battery and/or BMS sensor diagnostics.
Associated Products (27)2022 Ford Bronco2022 Ford Bronco Sport2022 Ford Edge2022 Ford Expedition2022 Ford Explorer2022 Ford F-1502022 Ford GT2022 Ford Maverick2022 Ford Mustang2022 Ford Ranger2022 Lincoln Aviator2022 Lincoln Corsair2022 Lincoln Nautilus2022 Lincoln Navigator2021 Ford Bronco2021 Ford Bronco Sport2021 Ford Edge2021 Ford Expedition2021 Ford Explorer2021 Ford F-150+ 7 moreAssociated Documents - June 29, 2022•Document ID: 10214878Service Bulletin/Repair InstructionsBACK OVER PREVENTION:SOFTWARE
- Mfr Comm. #:
- TSB 22-2254
- Date Added:
- July 1, 2022
- Manufacturer:
- FORD
SummarySome 2019-2020 Edge/F-150/Fusion/Continental/MKZ/Nautilus, 2019-2021 Mustang/Ranger/Transit Connect, 2020-2021 EcoSport/Escape/Expedition/Explorer/F-Super Duty/Aviator/Corsair/Navigator, 2021 Bronco Sport and 2020-2022 Explorer/Aviator vehicles with SYNC 3 may experience various SYNC performance related concerns. This may be due to the SYNC Software. To correct the condition, follow the Service Procedure to update the accessory protocol interface module (APIM) software.
Associated Products (13)Associated Documents - June 21, 2022•Document ID: 10214832Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 50873
- Date Added:
- June 30, 2022
- Manufacturer:
- LINCOLN
SummarySome 2017-2022 Ford and Lincoln vehicle owners may experience a condition of missing authorization, command and control, battery charging details or phone-as-a-key setup buttons/selections in their FordPass or LincolnWay App. This condition is due to an error within the FordPass or LincolnWay App and not due to a concern on the vehicle. Verify that the customers FordPass or LincolnWay App is at the latest version. Replacement or reprogramming of the telematics control unit (TCU)/gateway module (GWM)/remote function actuator (RFA) will not resolve this condition. If the condition persists, utilize the FordPass Guides or Lincoln Way Concierge teams.
Associated Products (25)2022 Ford Bronco Sport2022 Ford Edge2022 Ford Escape2022 Ford Expedition2022 Ford Explorer2022 Ford F-1502022 Ford Mustang2022 Ford Ranger2022 Ford Transit Connect2022 Lincoln Aviator2022 Lincoln Corsair2022 Lincoln Navigator2021 Ford Bronco Sport2021 Ford Edge2021 Ford Escape2021 Ford Expedition2021 Ford Explorer2021 Ford F-1502021 Ford Mustang2021 Ford Ranger+ 5 moreAssociated Documents - June 16, 2022•Document ID: 10214494Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 50863
- Date Added:
- June 29, 2022
- Manufacturer:
- FORD
SummarySome 2019-2022 Ranger vehicles may encounter a concern of FordPass not updating the current vehicle location and/or a battery draw is found to be from either the audio control module (ACM) or gateway module (GWM). This may be due to the software in the GWM. To correct this condition, reprogram the GWM using the latest software level of Ford Diagnosis and Repair System (FDRS). For claiming use causal part 14F642 and the applicable labor operations of Section 10 of the Service Labor Time Standards (SLTS) Manual.
Associated Products (2)Associated Documents - June 9, 2022•Document ID: 10214125Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- TSB 22-2225
- Date Added:
- June 13, 2022
- Manufacturer:
- FORD
SummarySome 2019-2020 Edge/F-150/Fusion/Continental/MKZ/Nautilus, 2019-2021 Mustang/Ranger/Transit Connect, 2020-2021 EcoSport/Escape/Expedition/Explorer/F-Super Duty/Aviator/Corsair/Navigator, 2021 Bronco Sport and 2020-2022 Explorer/Aviator vehicles with SYNC 3 may experience various SYNC performance related concerns. This may be due to the SYNC Software. To correct the condition, follow the Service Procedure to update the accessory protocol interface module (APIM) software.
Associated Products (9)Associated Documents - May 20, 2022•Document ID: 10212124Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- SSM 50793
- Date Added:
- May 24, 2022
- Manufacturer:
- FORD
SummaryThe 2021 Ranger front fender material migrated on 22-Apr-2021 from aluminum to steel. Additionally, service replacement fenders for 2019-2022 made of aluminum are no longer available. When replacing a front fender on Rangers built on or after 22-Apr-2021, no special instructions are needed as the service replacement steel front fenders are an exact replacement component. When replacing front fenders on Rangers built on or before 21-Apr-2021, replacement of the front bumper brackets SPN: KB3Z-17C887-D (right/front) and SPN: KB3Z-17C886-D (left/front) is required to ensure proper fitment of the new steel fender. Fender apron insulators, SPN: LB3Z-16071-A(right), SPN: LB3Z-16072-A(left) The exterior appearance of the aluminum and steel front fenders are identical. The fender material do not need to match side to side on a vehicle.
Associated Products (2)Associated Documents - May 2, 2022•Document ID: 10211722Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- SSM 50736
- Date Added:
- May 14, 2022
- Manufacturer:
- FORD
Summary2019-2021 Ranger and 2020-2021 Explorer with 2.3L EcoBoost engines and customer concern of increased engine oil level and/or fuel smell in oil. This may occur when operating conditions do not regularly allow the oil to reach full operating temperature such as: frequent short trips, long periods of idling or driving in stop and go traffic, and/or prolonged driving in cold climates. This condition is normal and will not affect engine durability due to increased oil level or fuel content in the oil. Advise customers concerned about their engine to regularly operate the vehicle in a manner to allow the oil to reach a normal, warm operating temperature which vaporizes the fuel, and follow Intelligent Oil-Life Monitor messages that alert when the oil should be changed based on how the vehicle is operated. Refer to the owner's manual for maintenance information.
Associated Products (2)Associated Documents - April 28, 2022•Document ID: 10210850Service Bulletin/Repair InstructionsTIRES:SIDEWALL
- Mfr Comm. #:
- SSM 50733
- Date Added:
- May 3, 2022
- Manufacturer:
- FORD
SummarySome 2021 and 2022 Ford and Lincoln vehicles may experience a tire sidewall wavy/indentation appearance in the radial direction on one or both sidewalls. Sidewall wavy/indentation appearance is a common cosmetic characteristic of radial tire construction and will not affect the performance of the tire.
Associated Products (33)2022 Ford Bronco2022 Ford Bronco Sport2022 Ford E-3502022 Ford E-4502022 Ford Edge2022 Ford Escape2022 Ford Expedition2022 Ford F-1502022 Ford Maverick2022 Ford Mustang2022 Ford Ranger2022 Ford Transit2022 Ford Transit Connect2022 Lincoln Aviator2022 Lincoln Corsair2022 Lincoln Nautilus2022 Lincoln Navigator2021 Ford Bronco2021 Ford Bronco Sport2021 Ford E-350+ 13 moreAssociated Documents - April 22, 2022•Document ID: 10210471Service Bulletin/Repair InstructionsEQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; POWER TRAIN
- Mfr Comm. #:
- TSB 22-2139
- Date Added:
- April 26, 2022
- Manufacturer:
- FORD
SummarySome 2017-2020 F-150, 2018-2022 Expedition/Navigator/Mustang and 2019-2022 Ranger vehicles equipped with a 10R80 automatic transmission may exhibit a harsh engagement/harsh shift/delayed shift. It is possible the vehicle may also have an illuminated malfunction indicator lamp (MIL) or diagnostic trouble codes (DTC) P0751, P0752, P0756, P0757, P0761, P0762, P0766, P0767, P0771, P0772, P2700, P2701, P2702, P2703, P2704, P2705, P2707, P2708, P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6 and/or P07F7 stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to incompatibility of the adaptive calibration to adapt to hardware break-in over time. To correct the condition, follow the Service Procedure steps to overhaul the main control valve body and/or perform an adaptive learning drive cycle.
Associated Products (8)Associated Documents - April 11, 2022•Document ID: 10210243Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING; POWER TRAIN
- Mfr Comm. #:
- SSM 50670
- Date Added:
- April 13, 2022
- Manufacturer:
- FORD
SummarySome 2021-2022 Ranger/Bronco vehicles equipped with a 2.3L EcoBoost engine built on or after 14-Dec-2021 and 2022 Explorer vehicles equipped with a 2.3L EcoBoost engine and built on or after 14-Dec-2021, may exhibit a lack of power with an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P25B4 stored in the powertrain control module (PCM). To correct the condition, clear the DTC and road test the vehicle under load until the vehicle reaches operating temperature. If the DTC repeats, the turbocharger will need to be replaced. For claiming use causal part 6K682 and applicable labor times found in Section 09 of the Service Labor Time Standards (SLTS) Manual. If the DTC does not repeat, release the vehicle to the customer.
Associated Products (5)Associated Documents