Nissan Rogue Service Bulletins
837 manufacturer communications on file.
- January 7, 2021•Document ID: 10186832Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:INFOTAINMENT:SOFTWARE
- Mfr Comm. #:
- NTB14-105a
- Date Added:
- February 6, 2021
- Manufacturer:
- NISSAN
Summary2014-2020 ROGUE; CARPET WET FRONT FLOOR AREA This bulletin has been amended. See AMENDMENT HISTORY on the last page. Discard all previous versions of this bulletin.
Associated Products (7)Associated Documents - January 4, 2021•Document ID: 10186831Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- NTB12-110d
- Date Added:
- February 6, 2021
- Manufacturer:
- NISSAN
SummaryPOWER BACK DOOR CALIBRATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Discard all previous versions of this bulletin.
Associated Products (22)2021 Nissan Murano2020 Nissan Murano2020 Nissan Pathfinder2020 Nissan Rogue2019 Nissan Murano2019 Nissan Pathfinder2019 Nissan Rogue2018 Nissan Murano2018 Nissan Pathfinder2018 Nissan Rogue2017 Nissan Murano2017 Nissan Pathfinder2017 Nissan Rogue2016 Nissan Murano2016 Nissan Pathfinder2016 Nissan Rogue2015 Nissan Murano2015 Nissan Pathfinder2015 Nissan Rogue2014 Nissan Pathfinder+ 2 moreAssociated Documents - December 22, 2020•Document ID: 10185472Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:WIRING; FUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- NTB20-094
- Date Added:
- January 9, 2021
- Manufacturer:
- NISSAN
Summary2015-2020 ROGUE; MIL ON WITH DTC P0181 AND/OR P0183 IF YOU CONFIRM The MIL is ON with DTC P0181 (FTT SENSOR) and/or P0183 (FTT SEN/CIRCUIT) stored in the ECM. ACTION 1. Remove the fuel pump assembly. 2. Inspect the fuel pump assembly wiring, and reroute the wiring, if applicable. 3. Reinstall the fuel pump assembly.
Associated Products (6)Associated Documents - December 22, 2020•Document ID: 10185473Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE; EQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- NTB20-095
- Date Added:
- January 9, 2021
- Manufacturer:
- NISSAN
Summary2021 ROGUE; AWD COUPLER SERVICE INFORMATION SERVICE INFORMATION The AWD coupler on the APPLIED VEHICLE listed above, is available as a separate service part. When replacement of the AWD coupler is required, DO NOT follow the ESM procedure. Instead, follow the procedure outlined in this service bulletin.
Associated Products (1)Associated Documents - December 18, 2020•Document ID: 10185432Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; EQUIPMENT
- Mfr Comm. #:
- NTB17-083b
- Date Added:
- January 9, 2021
- Manufacturer:
- NISSAN
SummaryMOTION ACTIVATED LIFTGATE STICKER This bulletin is no longer active. Please discard previous versions of NTB17-083.
Associated Products (5)Associated Documents - December 17, 2020•Document ID: 10185448Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT; VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM
- Mfr Comm. #:
- NTB20-090a
- Date Added:
- January 9, 2021
- Manufacturer:
- NISSAN
Summary2014-2020 ROGUE; HVAC BLOWER NOISY OR WATER DRIPS ON DRIVER SIDE CARPET This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Associated Products (7)Associated Documents - December 16, 2020•Document ID: 10185471Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; STRUCTURE:BODY
- Mfr Comm. #:
- NTB20-093
- Date Added:
- January 9, 2021
- Manufacturer:
- NISSAN
Summary2021 ROGUE; INTELLIGENT KEY UNIT DTC B203D-14 DIAGNOSTIC PROCEDURE SERVICE INFORMATION DTC B203D-14 indicates a concern in the circuit between the inside key antenna and the intelligent key control unit. Currently, the ESM does not have a diagnosis or repair procedure for DTC B203D-14. When DTC B203D-14 is confirmed, perform the diagnosis and repair procedures, outlined in the ESM, for DTC B203C-14. ï· For DTC B203C-14 diagnosis and repair procedure, refer to the ESM section: BODY EXTERIOR, DOORS, ROOF & VEHICLE SECURITY > DOOR & LOCK >DTC/CIRCUIT DIAGNOSIS > B203C-14 INSIDE ANTENNA.
Associated Products (1)Associated Documents - December 9, 2020•Document ID: 10185447Service Bulletin/Repair InstructionsEQUIPMENT; VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM; EQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- NTB20-090
- Date Added:
- January 9, 2021
- Manufacturer:
- NISSAN
Summary2014-2020 ROGUE; HVAC BLOWER NOISY OR WATER DRIPS ON DRIVER SIDE CARPET IF YOU CONFIRM The customer states the HVAC blower is noisy OR Water is dripping on the driver side carpet after going through a car wash. ACTION Refer to REPAIR OVERVIEW on page 2.
Associated Products (7)Associated Documents - December 8, 2020•Document ID: 10185425Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; EQUIPMENT
- Mfr Comm. #:
- NTB15-026d
- Date Added:
- January 9, 2021
- Manufacturer:
- NISSAN
Summary2014-2020 ROGUE; LACKS POWER DUE TO SNOW INGESTION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Associated Products (7)Associated Documents - December 4, 2020•Document ID: 10170198Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY; SUSPENSION; EQUIPMENT
- Mfr Comm. #:
- DOR-H5Y5B-01
- Date Added:
- January 13, 2020
- Manufacturer:
- NISSAN
SummaryThis SKU is a Suspension Ball Joint. The customer communication requested return of unsold inventory to inspect for the outer diameter of the ball joint housing being too small. The outer diameter being too small would prevent the part from being installed, and would therefore have no impact on the end user besides time to complete installation.
Associated Products (24)2019 Nissan Rogue2018 Nissan Rogue2017 Nissan Rogue2017 Nissan Rogue Sport2016 Nissan Rogue2015 Nissan Rogue2014 Nissan Rogue2013 Nissan Rogue2012 Nissan Rogue2011 Nissan Rogue2010 Nissan Rogue2009 Nissan Quest2009 Nissan Rogue2008 Nissan Quest2008 Nissan Rogue2007 Nissan Murano2007 Nissan Quest2006 Nissan Murano2006 Nissan Quest2005 Nissan Murano+ 4 moreAssociated Documents - November 30, 2020•Document ID: 10183979Service Bulletin/Repair InstructionsCOMMUNICATION:MANUFACTURER TELEMATICS; ELECTRICAL SYSTEM
- Mfr Comm. #:
- NTB20-085
- Date Added:
- December 9, 2020
- Manufacturer:
- NISSAN
SummaryTELEMATICS CONTROL UNIT RESET AFTER AUTOMATIC COLLISION NOTIFICATION SERVICE INFORMATION The Telematics Control Unit (TCU) has the ability to send an automatic collision notification when the vehicle is involved in an accident. Once an automatic collision notification is performed, the function becomes disabled. The TCU must be reset to re-enable the automatic collision notification function. This bulletin describes how to reset the TCU after an automatic collision notification has been performed.
Associated Products (7)Associated Documents - November 30, 2020•Document ID: 10183978Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM); EQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- NTB20-084
- Date Added:
- December 9, 2020
- Manufacturer:
- NISSAN
SummaryINTELLIGENT KEY UNIT DTC P161D STORED IN THE ECM SERVICE INFORMATION DTC P161D (IMMOBILIZER) will not cause: ï· The MIL to turn ON. ï· The Remote Engine Start to become inoperative. ï· The âNo Key Detectedâ message to appear. ï· An impact to any of the vehicleâs functions or performance. If other DTCs are stored with P161D, perform the diagnosis and repair procedures, outlined in the ESM, for the other DTCs first. ï· After the other DTCs have been resolved and P161D does not clear, proceed with the diagnosis and repair, outlined in the ESM, for DTC P161D.
Associated Products (3)Associated Documents - November 24, 2020•Document ID: 10183980Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY; POWER TRAIN; EQUIPMENT
- Mfr Comm. #:
- P0A33 2021 Rogue
- Date Added:
- December 9, 2020
- Manufacturer:
- NISSAN
SummaryFinal All Wheel Drive Clutch Break-In Dealer Announcement: Nissan is conducting a dealer inventory quality action to complete the final all-wheel drive (AWD) clutch break-in process on 5,789 2021 Nissan Rogue vehicles identified in Service Comm. Due to a design issue, that has since been corrected, Nissan has determined that the break-in process was not properly completed on the subject vehicles. As a result, customers may experience a vibration felt through the floorboard while making a ninety (90) degree turn. Affected vehicles are subject to stop sale and are either currently in dealer inventory or assigned and in transit to the dealer. What Dealers Should Do: PLEASE FOLLOW THE ATTACHED REPAIR INSTRUCTIONS: 1.Verify if vehicles are affected by this quality action using Service Comm or DBS National Service History â Open Campaign I.D. P0A33 â¢New vehicles in dealer inventory can also be identified by using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). ï§Refer to NPSB 15-460 for additional information â¢Some vehicles may still be in transit. Please continue to check newly arriving inventory for applicability. 2.Please do not drive, sell, loan, or trade the specific vehicles in Dealer Inventory subject to this Quality Action. 3.Use the attached procedure to complete the final all-wheel drive clutch break-in process prior to retail delivery of the vehicle. 4.Once remedied, dealers may submit the applicable warranty claim for the action performed and release the vehicle. Dealer Responsibility: It is the dealerâs responsibility to check Service Comm or DBS National Service History â Open Campaign using the appropriate campaign I.D for the inspection status on each affected vehicle currently in new vehicle inventory. Thank you for your prompt attention to this matter.
Associated Products (1)Associated Documents - November 17, 2020•Document ID: 10183975Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:BODY CONTROL MODULE/BCM; POWER TRAIN
- Mfr Comm. #:
- NTB20-081
- Date Added:
- December 9, 2020
- Manufacturer:
- NISSAN
Summary2021 ROGUE; VIBRATION FROM REAR WHILE TURNING AT LOW SPEED IF YOU CONFIRM The customer experiences a vibration or a stick/slip/binding feeling from the rear of the vehicle when turning at low speed. ACTION Perform the AWD coupler clutch break-in procedure.
Associated Products (1)Associated Documents - November 11, 2020•Document ID: 10184021Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- NTB19-067d
- Date Added:
- December 9, 2020
- Manufacturer:
- NISSAN
SummarySOFTWARE UPDATE FOR INFOTAINMENT ISSUES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Associated Products (7)Associated Documents - November 11, 2020•Document ID: 10183973Service Bulletin/Repair InstructionsEQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM
- Mfr Comm. #:
- NTB20-079
- Date Added:
- December 9, 2020
- Manufacturer:
- NISSAN
Summary2021 ROGUE; AV CONTROL UNIT REPLACEMENT PROCESS IF YOU CONFIRM The AV control unit needs to be replaced on an APPLIED VEHICLE. ACTION IMPORTANT: The AV control unit for the applied vehicle is new, different from the previous model year, and requires a new procedure when replacing. If the following procedures are not followed completely, all features will not work as intended. 1. Replace the AV control unit 2. Reprogram the AV control unit 3. Configure the AV control unit 4. Write the VIN to the AV control unit (Manual Input) IMPORTANT: Procedures 2-4 above must be performed in the order shown below.
Associated Products (1)Associated Documents - November 5, 2020•Document ID: 10184025Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- NTB20-052a
- Date Added:
- December 9, 2020
- Manufacturer:
- NISSAN
SummaryREAR DOOR ALERT SERVICE INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Associated Products (3)Associated Documents - November 5, 2020•Document ID: 10184016Service Bulletin/Repair InstructionsLANE DEPARTURE: SENSING SYSTEM: CAMERA; FORWARD COLLISION AVOIDANCE
- Mfr Comm. #:
- NTB19-042a
- Date Added:
- December 9, 2020
- Manufacturer:
- NISSAN
SummaryAEB WARNING LIGHT BLINKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Associated Products (43)2021 Nissan Altima2021 Nissan Armada2021 Nissan Kicks2021 Nissan Leaf2021 Nissan Maxima2021 Nissan Murano2021 Nissan Rogue2021 Nissan Sentra2021 Nissan Titan2021 Nissan Versa2020 Nissan Altima2020 Nissan Armada2020 Nissan Kicks2020 Nissan Leaf2020 Nissan Maxima2020 Nissan Murano2020 Nissan Rogue2020 Nissan Sentra2020 Nissan Titan2020 Nissan Versa+ 23 moreAssociated Documents - October 19, 2020•Document ID: 10182364Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:INFOTAINMENT; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- NTB20-075
- Date Added:
- November 9, 2020
- Manufacturer:
- NISSAN
SummarySOFTWARE UPDATE POP-UP NOTIFICATION SERVICE INFORMATION The infotainment system of the applied vehicle has the ability to update its software through an over-the-air (OTA) link. As software updates become available for new features, and/or patches, the software update screen (pop-up) shown in Figure 1 will automatically be displayed. Much like cell phone and computer updates, this is a normal feature which allows the user to choose when an update is downloaded. ï· It is recommended that while in dealer inventory and this pop-up appears, that â Yesâ is selected to provide the latest software version to the customer at delivery. NOTE: If the ignition is turned OFF in the middle of a download, it will automatically restart when the ignition is turned back ON. When one of the following is selected: Yesâ¦..The pop-up is hidden and the download starts in the background. Laterâ¦The pop-up is hidden and displayed again in the next key cycle (after cold start).
Associated Products (4)Associated Documents - October 14, 2020•Document ID: 10182363Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- NTB20-074
- Date Added:
- November 9, 2020
- Manufacturer:
- NISSAN
Summary2021 ROGUE AND 2020 SENTRA; BCM SERVICE INFORMATION SERVICE INFORMATION ï· When replacing the BCM, ALWAYS replace it with a new one. ï· Module configuration MUST BE performed before pairing the BCM and intelligent key unit. Once the BCM and intelligent key unit have been paired, portions of the configuration are locked and can no longer be changed. ï· When replacing the BCM, it is critical to follow the work procedure as detailed in the ESM. ï For Rogue, go to ELECTRICAL & POWER CONTROL > BODY CONTROL SYSTEM > BASIC INSPECTION > ADDITIONAL SERVICE WHEN REPLACING BCM. ï For Sentra, go to ELECTRICAL & POWER CONTROL > BODY CONTROL SYSTEM > BASIC INSPECTION > INSPECTION & ADJUSTMENT > ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT (BCM).
Associated Products (2)Associated Documents