Nissan Rogue Service Bulletins
837 manufacturer communications on file.
- May 22, 2026•Document ID: 11033020Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- NTB26-030
- Date Added:
- May 30, 2026
- Manufacturer:
- NISSAN
SummaryNEW PROCESS TO REPLACE THE TCU SERVICE INFORMATION For the APPLIED VEHICLES, the process to replace the Telematics Communication Unit (TCU) has changed. If the TCU for the APPLIED VEHICLES needs to be replaced for any reason, an email must be sent to Aeris Global Services Operation Center (Aeris) to activate the TCU before it is installed. Follow the steps starting on page 2 to activate the replacement TCU.
Associated Products (1)Associated Documents - May 1, 2026•Document ID: 11033026Service Bulletin/Repair InstructionsFUEL/PROPULSION SYSTEM
- Mfr Comm. #:
- NTB26-006A
- Date Added:
- May 30, 2026
- Manufacturer:
- NISSAN
SummaryFUEL FILLER TUBE LOWER SEAL IS LEAKING AND DTC P0456 IS STORED IN THE ECM This bulletin is no longer active. Please discard previous versions of NTB26-006.
Associated Products (16)Associated Documents - April 15, 2026•Document ID: 11031721Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- NTB26-019
- Date Added:
- April 29, 2026
- Manufacturer:
- NISSAN
SummaryMIL ON WITH DTC P0181 STORED IN THE ECM IF YOU CONFIRM The customer states the MIL is ON but the vehicle does not have any drivability concerns or reduced power message in the combination meter, AND DTC P0181 for “Fuel Tank Temperature” is stored in either “Past” or “Current” in the ECM. ACTION Follow the SERVICE PROCEDURE in this bulletin to: 1. Replace the fuel temperature sensor. 2. Erase all the DTCs.
Associated Products (9)Associated Documents - April 13, 2026•Document ID: 11031705Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- NTB09-131C
- Date Added:
- April 29, 2026
- Manufacturer:
- NISSAN
SummaryCERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1).
Associated Products (366)2026 Nissan Altima2026 Nissan Armada2026 Nissan Frontier2026 Nissan Kicks2026 Nissan Leaf2026 Nissan Murano2026 Nissan Pathfinder2026 Nissan Rogue2026 Nissan Sentra2025 Nissan Altima2025 Nissan Armada2025 Nissan Frontier2025 Nissan Kicks2025 Nissan Leaf2025 Nissan Murano2025 Nissan Pathfinder2025 Nissan Rogue2025 Nissan Sentra2025 Nissan Versa2024 Nissan Altima+ 346 moreAssociated Documents - April 13, 2026•Document ID: 11031704Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- NTB09-131C
- Date Added:
- April 29, 2026
- Manufacturer:
- NISSAN
SummaryCERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1).
Associated Products (366)2026 Nissan Altima2026 Nissan Armada2026 Nissan Frontier2026 Nissan Kicks2026 Nissan Leaf2026 Nissan Murano2026 Nissan Pathfinder2026 Nissan Rogue2026 Nissan Sentra2025 Nissan Altima2025 Nissan Armada2025 Nissan Frontier2025 Nissan Kicks2025 Nissan Leaf2025 Nissan Murano2025 Nissan Pathfinder2025 Nissan Rogue2025 Nissan Sentra2025 Nissan Versa2024 Nissan Altima+ 346 moreAssociated Documents - March 30, 2026•Document ID: 11031699Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- NTB15-049CC
- Date Added:
- April 29, 2026
- Manufacturer:
- NISSAN
SummaryTELEMATICS SERVICE INFORMATION HINT: This bulletin applies to vehicles equipped with a 4G network compatible TCU. TCUs compatible with 3G network only are no longer supported. SERVICE INFORMATION The APPLIED VEHICLES that come equipped with a factory installed SOS switch, located near the overhead map lamp, also come equipped with a wireless communication device called a Telematics Communication Unit (TCU). With an active NissanConnect® Services subscription, the TCU communicates with the NissanConnect® Services Data Center to provide various security and convenience services. This bulletin contains important service procedures that must be performed properly in order to set-up and maintain the telematics system for the APPLIED VEHICLES. · A table has been provided on the next page that lists the steps required to successfully configure a TCU after it has been replaced. · A CHECK-OFF SHEET has been provided on page 20 to print and check off steps as they are performed. Staple the completed CHECK-OFF SHEET to the repair order.
Associated Products (44)2025 Nissan Leaf2024 Nissan GT-R2024 Nissan Leaf2024 Nissan Murano2023 Nissan GT-R2023 Nissan Leaf2023 Nissan Murano2022 Nissan Altima2022 Nissan Leaf2022 Nissan Murano2022 Nissan Rogue Sport2021 Nissan Altima2021 Nissan GT-R2021 Nissan Leaf2021 Nissan Murano2021 Nissan Rogue Sport2020 Nissan Altima2020 Nissan Armada2020 Nissan GT-R2020 Nissan Leaf+ 24 moreAssociated Documents - February 2, 2026•Document ID: 11028683Service Bulletin/Repair InstructionsFUEL/PROPULSION SYSTEM
- Mfr Comm. #:
- NTB26-006
- Date Added:
- February 10, 2026
- Manufacturer:
- NISSAN
SummaryFUEL FILLER TUBE LOWER SEAL IS LEAKING AND DTC P0456 IS STORED IN THE ECM IF YOU CONFIRM The vehicle has a visible leak with a smoke machine test coming from the fuel filler tube lower seal, AND DTC P0456 is stored as “Active”, “Past”, or “Pending” in the ECM. ACTION 1. Remove the supplied funnel from the rear of the vehicle or trunk. 2. Insert the funnel completely in the fuel filler tube and remove completely five (5) times. 3. Re-check the fuel filler tube lower seal with a smoke machine to determine visually if any leak is present. 4. If the fuel filler lower seal continues to leak, replace the fuel filler tube. IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair.
Associated Products (16)Associated Documents - January 7, 2026•Document ID: 11028691Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- NTB25-063
- Date Added:
- February 10, 2026
- Manufacturer:
- NISSAN
SummaryVENT CONTROL VALVE IN ACTIVE TEST INOPERATIVE IN CONSULT 4 SERVICE INFORMATION An issue in CONSULT 4 has been identified in “EVAP system close” in Work support. · After selecting the "EVAP system close" in Work support, the “VENT CONTROL/V” in Active test becomes non-functional temporarily. · When selecting “EVAP system close” operation in Work support, wait 10 minutes before starting “VENT CONTROL/V” Active test or cycle the IGN switch ON/OFF for “VENT CONTROL/V” Active test to be operational. HINT: This bulletin applies to model years that use CONSULT 4 only.
Associated Products (10)Associated Documents - December 15, 2025•Document ID: 11028690Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- NTB25-064
- Date Added:
- February 10, 2026
- Manufacturer:
- NISSAN
SummaryMIL ON WITH DTCS P05D8 AND P05D9 STORED IN THE ECM IF YOU CONFIRM The MIL is ON with DTCs P05D8 for “PCV Regulator Valve Control Circuit/Open” and P05D9 for “PCV Regulator Valve Control Circuit Low” stored in the ECM, AND The wiring harness, for wiring harness connector F130, is severed at the Crank Case Ventilation Valve under the Engine Cover. ACTION Follow the SERVICE PROCEDURE starting on page 3 to repair the wiring harness. IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair.
Associated Products (2)Associated Documents - October 15, 2025•Document ID: 11024399Service CampaignELECTRICAL SYSTEM
- Mfr Comm. #:
- NTB25-046
- Date Added:
- October 21, 2025
- Manufacturer:
- NISSAN
Summary*****Dealer Announcement***** Nissan is conducting a service campaign on certain model year 2025 Nissan Rogue vehicles identified in Service Comm and National Service History – Open Campaigns. On affected vehicles, some NissanConnect Services subscribers are unable to access the remote engine start/stop and climate (RES) features via both the mobile app and the web portal. Customers are still able to use the key fob to remotely start their vehicle. To restore NissanConnect Services subscribers’ RES feature through the mobile app and web portal, your Nissan dealer will reconfigure the Body Control Module (BCM). *****What Dealers Should Do***** 1. Verify if vehicles are affected by this service campaign using Service Comm or DBS National Service History – Open Campaigns I.D. PD175 2. If a retailed vehicle affected by this Campaign ID visits the dealer for service, the dealer should inform the customer about the service campaign and communicate the reconfiguration is available. 3. Once remedied, dealers should submit the applicable warranty claim for the action performed so it can be closed in Service Comm and release the vehicle to the customer.
Associated Products (1)Associated Documents - October 14, 2025•Document ID: 11024400Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- NTB25-046
- Date Added:
- October 21, 2025
- Manufacturer:
- NISSAN
SummaryVOLUNTARY SERVICE CAMPAIGN 2025 ROGUE; REMOTE ENGINE START BCM CONFIGURATION INTRODUCTION Nissan is conducting this voluntary service campaign on certain specific model year 2025 Rogue vehicles to reconfigure the BCM. This service will be performed at no charge to the customer for parts or labor. IDENTIFICATION NUMBER Nissan has assigned identification number PD175 to this campaign. This number must appear on all communication and documentation of any nature dealing with this campaign. DEALER RESPONSIBILITY Dealers are to repair vehicles falling within range of this campaign that enter the service department. This includes vehicles purchased from private parties, vehicles presented by transient (tourists) owners, and vehicles in a dealer’s inventory.
Associated Products (1)Associated Documents - October 1, 2025•Document ID: 11024395Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- NTB25-030A
- Date Added:
- October 21, 2025
- Manufacturer:
- NISSAN
SummarySTEERING WHEEL SWITCH BUTTONS INOPERATIVE, STICKING, OR NOT CLICKING WHEN PRESSED IF YOU CONFIRM The customer states that any of the steering wheel switch buttons are inoperative, sticking, or not clicking when pressed. ACTION Follow the SERVICE PROCEDURE to: 1. Remove the steering wheel assembly. 2. Replace the switch assembly on the steering wheel assembly. HINT: The switch assembly includes switches for both sides of the steering wheel. 3. Reinstall the steering wheel assembly. IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair. This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Associated Products (9)Associated Documents - October 1, 2025•Document ID: 11024391Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- NPSB 15-460
- Date Added:
- October 21, 2025
- Manufacturer:
- NISSAN
SummaryACTION Date: October 2, 2025 To: FOMs, DOMs, RAMs, & RGMs Subject: LAUNCH PD172 PMA55 Multi Model Monroney Bumper Label – QA – Dealer Announcement and Procedure ACTION: FOMs & DOMs are asked to ensure that dealers are aware of this new campaign information. Dealer Announcement: To ensure continued customer satisfaction and confidence, Nissan is conducting a quality action on certain specific model year 2025 ARIYA, 2024-2025 Pathfinder, 2024-2026 Rogue, 2024-2025 Murano and 2025-2026 Kicks vehicles, as identified in Service Comm and DBS National Service History. This action updates the Monroney labels to reflect corrected bumper labeling requirements for California and Hawaii. Dealers will replace original Monroney labels with corrected Monroney labels. Nissan will send VIN-specific corrected labels to address affected vehicles in dealer inventory. New labels will begin shipping via Federal Express Wednesday, October 1, 2025. Dealers will replace original Monroney labels with corrected Monroney labels. Affected vehicles are subject to stop sale and are either currently in dealer inventory or assigned and in transit to the dealer. What Dealers Should Do: PLEASE FOLLOW THE ATTACHED INSTRUCTIONS: 1.Verify if vehicles are affected by this quality action using Service Comm or DBS National Service History – Open Campaigns I.D. PD172 & PMA55 •New vehicles in dealer inventory can also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). Refer to NPSB 15-460 for additional information •Some vehicles may still be in transit. Please continue to check newly arriving inventory for applicability. 2.Please do not drive, loan, sell or trade the specific vehicles in dealer inventory subject to this quality action. 3.Use the attached procedure to remedy any vehicles affected by this quality action prior to sale. 4.If you have exchanged or traded one of the affected vehicles to another Nissan dealer, please forward the corrected Monroney label to the current dealer upon receipt so it can be attached to the vehicle. •If a vehicle has been retailed, dispose of the corrected Monroney label using the same procedure as for destroying the original Monroney label. 5.The service department should submit the applicable warranty claim for the action performed to close the campaign in Service Comm and release the vehicle.
Associated Products (7)Associated Documents - March 20, 2025•Document ID: 11015914Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- NTB25-008
- Date Added:
- March 25, 2025
- Manufacturer:
- NISSAN
Summary"ENGINE MALFUNCTION POWER REDUCED SERVICE NOW" DISPLAYED IN COMBINATION METER IF YOU CONFIRM The customer states that a "Engine Malfunction Power Reduced Service Now" warning is being displayed, or was displayed in the past, OR DTC P0404 for “EGR A CONTROL” is stored as “Past” or “Current” in the ECM. ACTION Refer to the SERVICE PROCEDURE in this bulletin to: 1. Confirm the current ECM part number. 2. Reprogram the ECM, if applicable. IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair.
Associated Products (3)Associated Documents - February 28, 2025•Document ID: 11015917Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- NTB25-014
- Date Added:
- March 25, 2025
- Manufacturer:
- NISSAN
SummaryREAR VIEW CAMERA IS INOPERATIVE OR "X" IS DISPLAYED WHEN SHIFTING INTO REVERSE IF YOU CONFIRM The Rear View Camera is inoperative or an "X" is displayed when shifting into reverse, AND There is corrosion at the Rear View Camera wiring harness connector D504 (Figure 2 on page 2). ACTION 1. Replace the Wiper Grommet Seal, the Rear Camera Harness, add Rear Camera Wiring Harness Dampers and, if there are signs of corrosion in the camera connector, the Camera. 2. Add Drain holes to the bottom of the rear door.
Associated Products (3)Associated Documents - February 20, 2025•Document ID: 11014472Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING; SERVICE BRAKES
- Mfr Comm. #:
- NTB19-042F
- Date Added:
- February 25, 2025
- Manufacturer:
- NISSAN
SummaryAUTOMATIC EMERGENCY BRAKING WARNING LIGHT BLINKING APPLIED SYSTEMS: Vehicles equipped with a lane camera (see Figure 1) SERVICE INFORMATION If the Automatic Emergency Braking (AEB) warning light or is blinking (but not illuminated steadily) or the customer states it is blinking, and there are no related DTCs, inspect the windshield. A blinking AEB warning light may occur under the following conditions: When contamination or foreign material adhere to the lane camera viewing window on the windshield. When driving while it is snowing or when frost forms on the lane camera viewing window on the windshield. When the lane camera viewing window on the windshield is temporarily fogged up. Figure 1 Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle. HINT: o Refer to the applicable ESM for diagnosis if DTCs are present in the Laser/Radar, ICC/ADAS, or Lane Camera systems. o For further information: Refer to the following pages. Use the search keyword “blinking” in the ESM.
Associated Products (80)2024 Nissan Altima2024 Nissan Armada2024 Nissan Frontier2024 Nissan Kicks2024 Nissan Leaf2024 Nissan Murano2024 Nissan Pathfinder2024 Nissan Sentra2024 Nissan Titan2024 Nissan Versa2023 Nissan Altima2023 Nissan Armada2023 Nissan Frontier2023 Nissan Kicks2023 Nissan Leaf2023 Nissan Maxima2023 Nissan Murano2023 Nissan Pathfinder2023 Nissan Rogue2023 Nissan Sentra+ 60 moreAssociated Documents - February 20, 2025•Document ID: 11014471Service Bulletin/Repair InstructionsFORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; ELECTRICAL SYSTEM; SERVICE BRAKES; FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING
- Mfr Comm. #:
- NTB19-033G
- Date Added:
- February 25, 2025
- Manufacturer:
- NISSAN
SummaryINTELLIGENT CRUISE CONTROL INOPERATIVE AND AEB/FEB WARNING LIGHT ON OR RADAR OBSTRUCTION MESSAGE DISPLAYED WITH DTC C1A16 OR C2582 IF YOU CONFIRM IMPORTANT: The purpose of ACTION (on the next page) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair. Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle. The customer states that the ICC stopped working while driving, OR The customer states that the AEB/FEB warning light is ON, or turned ON, while driving (Figure 1), OR The message “Unavailable Front Radar Obstruction” or “Forward Driving Aids Temporarily Disabled Front Sensor Blocked See Owner's Manual” has displayed while driving (Figure 2). AND DTC C1A16, C1A16-97, C2582, or C2582-97 is the ONLY DTC stored. Figure 1 Figure 2 This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. Forward Driving Aids Temporarily Disabled Front Sensor Blocked See Owner’s Manual
Associated Products (93)2024 Nissan Armada2024 Nissan Frontier2024 Nissan Kicks2024 Nissan Leaf2024 Nissan Murano2024 Nissan Pathfinder2024 Nissan Sentra2024 Nissan Titan2024 Nissan Versa2023 Nissan Altima2023 Nissan Armada2023 Nissan Frontier2023 Nissan Kicks2023 Nissan Leaf2023 Nissan Maxima2023 Nissan Murano2023 Nissan Pathfinder2023 Nissan Rogue2023 Nissan Sentra2023 Nissan Titan+ 73 moreAssociated Documents - January 29, 2025•Document ID: 11014075Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE
- Mfr Comm. #:
- NTB25-007
- Date Added:
- February 10, 2025
- Manufacturer:
- NISSAN
SummaryMIL ON WITH DTC P0196 STORED IN THE ECM IF YOU CONFIRM The MIL is ON with DTC P0196 for “EOT SENSOR” stored in the ECM. HINT: DTC P0012 for “INTAKE VALVE TIMING CONTROL B1” may be stored along with P0196 for “EOT SENSOR”. ACTION Follow the SERVICE PROCEDURE in this bulletin to diagnose DTC P0196 for “EOT SENSOR”. Disregard P0012 if stored along with P0196. Do not follow the service information in the ESM when diagnosing P0196. The ESM information will be updated at a later date.
Associated Products (5)Associated Documents - January 21, 2025•Document ID: 11013264Service Bulletin/Repair InstructionsFORWARD COLLISION AVOIDANCE: WARNINGS; FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING
- Mfr Comm. #:
- NTB18-041E
- Date Added:
- January 30, 2025
- Manufacturer:
- NISSAN
SummaryFALSE ACTIVATION OF AEB, FEB, OR FCW IF YOU CONFIRM The following system(s) falsely activated or the customer reports false activation of: AEB (Automatic Emergency Braking); FEB (Forward Emergency Braking); FCW (Forward Collision Warning) ACTION 1. Check Service COMM or Dealer Business Systems (DBS) National Service History to determine if campaign NTB19-064 applies to this vehicle. If the campaign IS applicable to the vehicle you are working on, then this bulletin does NOT apply. ONLY perform campaign NTB19-064. 2. Refer to Repair Overview on page 2. IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair.
Associated Products (4)Associated Documents - January 21, 2025•Document ID: 11013265Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- NTB21-040B
- Date Added:
- January 30, 2025
- Manufacturer:
- NISSAN
SummaryDTCS B2740-87, B2744-87, AND/OR B274D-87 STORED IF YOU CONFIRM Any of the following DTCs are stored: B2740-87 (TCU) B2744-87 (BCM) B274D-87 (Combination Meter) ACTION Follow the SERVICE PROCEDURE to reprogram the Sonar Control Unit, if applicable. IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair.
Associated Products (1)Associated Documents