Jeep Wagoneer Service Bulletins (2024)
464 manufacturer communications on file.
- August 28, 2024•Document ID: 11006826OtherSTEERING; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 100079
- Date Added:
- September 3, 2024
- Manufacturer:
- JEEP
SummaryWIRING - ELECTRIC POWER STEERING
Associated Products (6)Associated Documents - August 24, 2024•Document ID: 11006696Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- S2418000010
- Date Added:
- August 30, 2024
- Manufacturer:
- JEEP
SummaryMIL On/Check Engine Lamp On, Engine May Run Rough
Associated Products (7)Associated Documents - August 22, 2024•Document ID: 11006884OtherSTRUCTURE:BODY
- Mfr Comm. #:
- 99964
- Date Added:
- September 4, 2024
- Manufacturer:
- JEEP
SummaryBEZEL - DOOR HANDLE
Associated Products (8)Associated Documents - August 22, 2024•Document ID: 11006628Service Bulletin/Repair InstructionsLANE DEPARTURE: BLIND SPOT DETECTION; FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; LANE DEPARTURE: ASSIST; UNKNOWN OR OTHER
- Mfr Comm. #:
- 08-190-24
- Date Added:
- August 26, 2024
- Manufacturer:
- JEEP
Summary"Flash: Central ADAS Decision Module (CADM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● C008E - ECU Internal Performance. ● C2203-00 - Current VIN Missing/Mismatch. ● U015C-00 - Lost Communication With Automated Driving System Control Module ""A"". In addition, the customer may comment on one ore more of the following: ● Active Lane Management (ALM) settings do not save and turns ""Off"" between key-cycles. ● Adaptive Cruise Control (ACC) settings do not save between key-cycles. Defaults back to ""4 Bars"". ● ""Automatic Emergency Braking (AEB) Unavailable Service Required"" pop up intermittently on the Instrument Panel Cluster (IPC). ● ""Active Lane Management (ALM) Unavailable Service Required"" warning message appears on the IPC with no active fault codes. ● Blind Spot Monitoring (BSM) Warning Light LED ""flickering"" when activated. ● Traffic Sign Information (TSI) feature Indicator on the IPC ""blinking"" when driving past consecutive speed signs. This bulletin involves reprogramming of the CADM with the latest available software."
Associated Products (2)Associated Documents - August 21, 2024•Document ID: 11006842Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 100040
- Date Added:
- September 4, 2024
- Manufacturer:
- JEEP
SummaryCENTER STACK - VEHICLE FEATURE CONTROLS
Associated Products (6)Associated Documents - August 20, 2024•Document ID: 11006630Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 9100401REV1
- Date Added:
- August 26, 2024
- Manufacturer:
- JEEP
Summary3.5" speaker assembly Before replacing a speaker part for crackles or rattling noises make sure to take the following steps: 1. Check for electrical harness routing too close to speaker's rear moving parts, improper connection, and/or harness pinch or damage. 2. Ensure no loose components, including trim grilles, fasteners, surrounding IP parts, etc. were found when removing the speaker. 3. Try "bad" speaker at another IP location and see if noise follows speaker. Try a different "good" speaker at "bad speaker location" and see if noise still happens at "bad" location. 4. Remove the bad speaker and replace it back. 5. If even with this verification and adjustments the speaker sounds bad, test the individual speaker with the audio files provided in the Service Library Homepage under "Reference Materials" prior to replacement. Follow all these steps, if issue still happens; reach out to the engineer at Stellantis for more support, if the engineer doesn t respond in 30 minutes. Then the speaker can be replaced.
Associated Products (4)Associated Documents - August 12, 2024•Document ID: 11006346Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 9100401
- Date Added:
- August 14, 2024
- Manufacturer:
- JEEP
Summary3.5" speaker assembly Before replacing a speaker part for crackles or rattling noises make sure to take the following steps: 1. Check for electrical harness routing too close to speaker's rear moving parts, improper connection, and/or harness pinch or damage. 2. Ensure no loose components, including trim grilles, fasteners, surrounding IP parts, etc. were found when removing the speaker. 3. Try "bad" speaker at another IP location and see if noise follows speaker. Try a different "good" speaker at "bad speaker location" and see if noise still happens at "bad" location. If even with this verification and adjustments the speaker sounds bad, test the individual speaker with the audio files provided in the Service Library Homepage under "Reference Materials" prior to replacement.
Associated Products (4)Associated Documents - August 9, 2024•Document ID: 11006221Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; SERVICE BRAKES; FORWARD COLLISION AVOIDANCE: WARNINGS
- Mfr Comm. #:
- S248A000013
- Date Added:
- August 12, 2024
- Manufacturer:
- JEEP
SummaryAfter Radio Software Update, Pedestrian Emergency Brake (PEB) Lamp and Forward Collision Warning (FCW) Lamp on in Cluster or Other Customer Programable Features Concerns Not Set, No Diagnostic Trouble Codes (DTCs)
Associated Products (12)Associated Documents - August 7, 2024•Document ID: 11006241Service Bulletin/Repair InstructionsSTRUCTURE:BODY; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 23-004-24 REV. A
- Date Added:
- August 13, 2024
- Manufacturer:
- JEEP
Summary"Headlamp Condensation Clearing Procedure Some customers may report that on occasion, vehicle exterior head lamp assemblies are fogged with a light layer of condensation on the inside of the lenses."
Associated Products (41)2024 Dodge Durango2024 Jeep Compass2024 Jeep Gladiator2024 Jeep Grand Cherokee2024 Jeep Grand Wagoneer2024 Jeep Renegade2024 Jeep Wagoneer2024 Jeep Wrangler2024 Ram 15002023 Dodge Durango2023 Jeep Cherokee2023 Jeep Compass2023 Jeep Gladiator2023 Jeep Grand Cherokee2023 Jeep Grand Wagoneer2023 Jeep Renegade2023 Jeep Wagoneer2023 Jeep Wrangler2023 Ram 15002022 Dodge Durango+ 21 moreAssociated Documents - August 3, 2024•Document ID: 11006236Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- S2108000249 REV.C
- Date Added:
- August 12, 2024
- Manufacturer:
- JEEP
SummaryCluster and Radio Display Settings Revert Back to Default Settings, Auto Door Locks and Paddle Shifter Inoperative With No Menu to Enable, Pedestrian Emergency Brake (PEB) Lamp and Forward Collision Warning (FCW) Lamp on After a Recent Service Repair no Diagnostic Trouble Codes (DTCs)
Associated Products (13)Associated Documents - August 2, 2024•Document ID: 11006235Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- S2423000030 REV.A
- Date Added:
- August 12, 2024
- Manufacturer:
- JEEP
SummaryBuzz Squeak Rattle (BSR) From Upper Left Dash Area.
Associated Products (6)Associated Documents - July 26, 2024•Document ID: 11005275Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; STRUCTURE:BODY
- Mfr Comm. #:
- S2408000016 REV.A
- Date Added:
- July 26, 2024
- Manufacturer:
- JEEP
SummaryFront Passenger, Rear right and/or Rear left Window Door Window Switches are Inoperative, Window Operation Does Work from the Driver Master Switch
Associated Products (6)Associated Documents - July 25, 2024•Document ID: 11005321Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 18-063-24
- Date Added:
- July 30, 2024
- Manufacturer:
- JEEP
Summary"Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P06DD - Engine Oil Pressure Control Circuit Performance/Stuck Off. ● P00F3 - Humidity Sensor Circuit Range/Performance. Customer may also experience one or more of the following: ● Customers may experience coasting complaints at lower speed. ● Undesirable vehicle drivability behavior causing a vehicle Shift to Park event during Engine Stop Start (ESS) while Adaptive Cruise Control (ACC) is active. ● Pressing ACC button while ESS active can shift the vehicle to park. ● Idle speed oscillations observed when in Snow and Mud modes. ● Poor engine performance (undershoots engine speed) for ESS and for non-ESS engine start. ● Screen two incorrectly pops up on the Instrument Cluster Panel (IPC) for 5 seconds during Terrain and Rock mode. This bulletin involves reprogramming the PCM with the latest available software."
Associated Products (2)Associated Documents - July 24, 2024•Document ID: 11005356OtherPOWER TRAIN
- Mfr Comm. #:
- 99500
- Date Added:
- July 31, 2024
- Manufacturer:
- JEEP
SummaryCARRIER – PLANETARY & SHAFT KIT - OUTPUT
Associated Products (57)2025 Dodge Durango2025 Jeep Gladiator2025 Jeep Grand Cherokee2025 Jeep Grand Wagoneer2025 Jeep Wagoneer2025 Jeep Wrangler2025 Ram 15002024 Dodge Durango2024 Jeep Gladiator2024 Jeep Grand Cherokee2024 Jeep Grand Wagoneer2024 Jeep Wagoneer2024 Jeep Wrangler2024 Ram 15002023 Chrysler 3002023 Dodge Challenger2023 Dodge Charger2023 Dodge Durango2023 Jeep Gladiator2023 Jeep Grand Cherokee+ 37 moreAssociated Documents - July 24, 2024•Document ID: 11005207Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- S2408000080
- Date Added:
- July 24, 2024
- Manufacturer:
- JEEP
SummaryDifferent Cluster Displays Have a Reduced View While in Analog Mode, Darkened Sides
Associated Products (4)Associated Documents - July 19, 2024•Document ID: 11004978Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; STRUCTURE:BODY
- Mfr Comm. #:
- S2408000079
- Date Added:
- July 19, 2024
- Manufacturer:
- JEEP
SummaryLow Battery, No Crank No Start, Cluster Message “Service Keyless System”, Intermittent Power Liftgate Operation
Associated Products (9)Associated Documents - July 11, 2024•Document ID: 11004344Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 9100388
- Date Added:
- July 11, 2024
- Manufacturer:
- JEEP
SummaryBODY CONTROL MODULE After Battery Drainage BCM do not work. Please follow the following steps. 1. Check the BCM PROXI, if the BCM or any other modules are not aligned, then perform the PROXI alignment, reset the modules and perform normal ignition cycle (OFF to RUN to OFF) 2. If PROXI is correct (No misalignment), then reset the BCM module and perform normal ignition cycle. 3. Check for the DTC's and check wiring and components related to those DTC's and clear them
Associated Products (2)Associated Documents - July 11, 2024•Document ID: 11004342Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 9100386
- Date Added:
- July 11, 2024
- Manufacturer:
- JEEP
SummarySecurity Gateway Module Battery Voltage - Circuit Voltage Below Threshold - DTC B2199-16 Repair Action : 1) Check OR Replacing cabling. 2) Check OR Replacing connector. 3) Check the battery is good OR Replacing battery. 4) Check OR Replacing FUSE. 5) Check SGW terminal. Battery Voltage - Circuit Voltage Above Threshold - DTC B2199-17 Repair Action : 1) Check OR Replacing cabling. 2) Check OR Replacing connector. 3) Check the battery is good OR Replacing battery. 4) Check OR Replacing FUSE. 5) Check SGW terminal. CAN Bus- [C-CAN1] (Node mute) or CAN Bus Off Performance- (Bus off failure) - Check DTC in DTC matrix Repair Action: 1) CAN Lines Check 2) Read Fault memory of all nodes 3) Check and download the right calibration file for current vehicle configuration Ethernet Bus Failure - Check DTC Repair Action: 1) CAN Lines Check 2) Read Fault memory of all nodes 3) Check and download the right calibration file for current vehicle configuration ECU-In-Plant-Mode - B235A-00 Repair Action: Install Calibration file with correct policy Ecu Internal Performance - Internal Electronic Failure - DTC B22A9-49 Repair Action: 1. If its in store clear and check again if DTC shows up. 2. Check battery voltage 3. Issue still exist then change ECU ECU Not Programmed / Flash Required (No Valid Application) - DTC C221C-00 Repair Action: 1. Reflash ECU with correct file Control Module Security Certificate Missing/Invalid - DTC U3033-00 or U3033-01 Repair Action: 1. Check connectivity 2. Ethernet network 3. Flash with the latest FOTA App Code 4. Flash the cert store with correct certificate 5. Clear Faults
Associated Products (7)Associated Documents - July 10, 2024•Document ID: 11004151Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- S2408000015 REV.C
- Date Added:
- July 10, 2024
- Manufacturer:
- DODGE
SummaryRemote Keyless Entry (RKE) Functions Do Not Work, Intermittent Vehicle Response When Using the RKE, Key Not Programmed, Adding Remote Start
Associated Products (53)2024 Jeep Cherokee2024 Jeep Compass2024 Jeep Gladiator2024 Jeep Grand Wagoneer2024 Jeep Wagoneer2024 Jeep Wrangler2024 Ram 15002024 Ram 25002024 Ram 35002024 Ram 45002024 Ram 55002023 Dodge Durango2023 Jeep Cherokee2023 Jeep Compass2023 Jeep Gladiator2023 Jeep Grand Wagoneer2023 Jeep Wagoneer2023 Jeep Wrangler2023 Ram 15002023 Ram 2500+ 33 moreAssociated Documents - July 2, 2024•Document ID: 11003281Service Bulletin/Repair InstructionsSEATS
- Mfr Comm. #:
- 9100364
- Date Added:
- July 4, 2024
- Manufacturer:
- JEEP
SummarySeat Control Module 3RD ROW SEAT WILL NOT CLOSE FULLY DOWN CUSTOMER STATES THE PASSENGER SIDE 3RD ROW WILL NOT CLOSE FULLY DOWN Steps for Tech: Before recalibrating 3rd row see please follow below mentioned steps first. -Turn off vehicle for 2 minute and then turn on vehicle and press 3rd row seat switch 2 times - Seat will start moving and relearn its correct hard stops and parameters. -Seat will recalibrate itself with updated SW.
Associated Products (6)Associated Documents