Jeep Wagoneer S Service Bulletins
298 manufacturer communications on file.
- July 24, 2025•Document ID: 11021029Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- 23-006-25 REV. B
- Date Added:
- July 31, 2025
- Manufacturer:
- RAM
SummaryWindshield Wiper Blade Maintenance Customers may experience one or more of the following: ● Wiper blades that chatter/streak/jump/skip/smear or make noise while traveling across the windshield.
Associated Products (64)2026 Chrysler Pacifica2026 Chrysler Voyager2026 Dodge Charger2026 Dodge Durango2026 Jeep Recon2025 Alfa Romeo Stelvio2025 Chrysler Pacifica2025 Chrysler Voyager2025 Dodge Charger2025 Dodge Durango2025 Dodge Hornet2025 Jeep Compass2025 Jeep Gladiator2025 Jeep Grand Cherokee2025 Jeep Grand Cherokee L2025 Jeep Grand Wagoneer2025 Jeep Wagoneer2025 Jeep Wagoneer S2025 Jeep Wrangler2025 Ram 1500+ 44 moreAssociated Documents - July 24, 2025•Document ID: 11021012Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-223-25
- Date Added:
- July 31, 2025
- Manufacturer:
- JEEP
SummaryHands Free Kick Sensor Replacement ustomer may comment on one or more of the following: ● Drained 12V battery. ● Kick sensor is activating liftgate when there's no person kicking below rear fascia with keyfob on hand. NOTE: The liftgate will only open and close if the keyfob is present. This bulletin involves replacing the Hands Free Power Liftgate Module (Sensor).
Associated Products (2)Associated Documents - July 21, 2025•Document ID: 11021035Service Bulletin/Repair InstructionsAIR BAGS
- Mfr Comm. #:
- 105649
- Date Added:
- July 31, 2025
- Manufacturer:
- DODGE
SummaryMODULE - AIR BAG CONTROL & MODULE - OCCUPANT RESTRAINT
Associated Products (6)Associated Documents - July 21, 2025•Document ID: 11021033Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 106188
- Date Added:
- July 31, 2025
- Manufacturer:
- DODGE
SummaryMODULE - EV CONTROL UNIT
Associated Products (6)Associated Documents - July 16, 2025•Document ID: 11020842Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-207-25 REV. C
- Date Added:
- July 23, 2025
- Manufacturer:
- JEEP
SummaryFlash: Electronic Vehicle Control Unit (EVCU) Updates 6A2 Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● C10FA-00 - Wheel Hub disconnect Actuator Performance Left. ● C10FB-00 - Wheel Hub disconnect Actuator Performance Right. Customers may also comment on the following: ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC) This bulletin involves inspecting and possibly reprogramming the EVCU with the latest available software and then performing a Wheel End Disconnect Position Learn routine
Associated Products (1)Associated Documents - July 16, 2025•Document ID: 11020831Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-206-25 REV. B
- Date Added:
- July 23, 2025
- Manufacturer:
- JEEP
SummaryFlash: Electronic Vehicle Control Unit (EVCU) Updates 11A2 Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● C10FA-00 - Wheel Hub disconnect Actuator Performance Left. ● C10FB-00 - Wheel Hub disconnect Actuator Performance Right. Customers may also comment on the following: ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC This bulletin involves inspecting and possibly reprogramming the EVCU with the latest available software and then performing a Wheel End Disconnect Position Learn routine.
Associated Products (1)Associated Documents - July 14, 2025•Document ID: 11020849Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- S2523000068
- Date Added:
- July 23, 2025
- Manufacturer:
- JEEP
SummaryBuzz Squeak Rattle (BSR) Noise From Headliner Near Sunroof Opening, Passenger Side Visor, Or B-pillar Area.
Associated Products (2)Associated Documents - July 11, 2025•Document ID: 11020777Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- S2408000126 REV.A
- Date Added:
- July 17, 2025
- Manufacturer:
- JEEP
SummaryDiagnostic Trouble Code (DTC) B1A0A-00 Remote Keyless Entry (RKE) FOB 3 Performance
Associated Products (12)Associated Documents - July 11, 2025•Document ID: 11020775Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- S2519000002 REV.A
- Date Added:
- July 17, 2025
- Manufacturer:
- JEEP
SummarySteering Wheel Off Center. Diagnostic Trouble Code (DTC) C0051-00 Set.
Associated Products (2)Associated Documents - July 10, 2025•Document ID: 11020748Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-207-25 REV. A
- Date Added:
- July 17, 2025
- Manufacturer:
- JEEP
SummaryFlash: Electronic Vehicle Control Unit (EVCU) Updates 6A2 Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● C10FA-00 - Wheel Hub disconnect Actuator Performance Left. ● C10FB-00 - Wheel Hub disconnect Actuator Performance Right. Customers may also comment on the following: ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). This bulletin involves reprogramming the EVCU with the latest available software and performing a Wheel End Disconnect Position Learn routine.
Associated Products (1)Associated Documents - July 10, 2025•Document ID: 11020747Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-206-25 REV. A
- Date Added:
- July 17, 2025
- Manufacturer:
- JEEP
SummaryFlash: Electronic Vehicle Control Unit (EVCU) Updates 11A2 Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● C10FA-00 - Wheel Hub disconnect Actuator Performance Left. ● C10FB-00 - Wheel Hub disconnect Actuator Performance Right. Customers may also comment on the following: ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). This bulletin involves reprogramming the EVCU with the latest available software and performing a Wheel End Disconnect Position Learn routine
Associated Products (1)Associated Documents - July 10, 2025•Document ID: 11020746Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-134-25 REV. A
- Date Added:
- July 17, 2025
- Manufacturer:
- JEEP
SummaryFlash: Integrated Dual Charging Module (IDCM) Updates 6A2 Customers may comment on one or more of the following: ● 12 volt battery lamp on the Instrument Panel Cluster (IPC) illuminated due to depleted 12 volt battery. ● Unable to charge at High Voltage Charging station at Level-1, Level-2 or DC Fast Charge This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine.
Associated Products (1)Associated Documents - July 10, 2025•Document ID: 11020744Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-132-25 REV. A
- Date Added:
- July 17, 2025
- Manufacturer:
- JEEP
SummaryRSU With Additional Sleep Cycles for HV Battery Integrity Check - Flash: Integrated Dual Charging Module (IDCM) Updates 11A2 Customers may comment on one or more of the following: ● 12 volt battery lamp on the Instrument Panel Cluster (IPC) illuminated due to depleted 12 volt battery. ● Unable to charge at High Voltage Charging station at Level-1, Level-2 or DC Fast Charge. This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine
Associated Products (1)Associated Documents - July 10, 2025•Document ID: 11020742Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-129-25 REV. B
- Date Added:
- July 17, 2025
- Manufacturer:
- JEEP
SummaryFlash: Integrated Dual Charging Module (IDCM) Updates 11A2 Customers may comment on one or more of the following: ● 12 volt battery lamp on the Instrument Panel Cluster (IPC) illuminated due to depleted 12 volt battery. ● Unable to charge at High Voltage Charging station at Level-1, Level-2 or DC Fast Charge. This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine.
Associated Products (1)Associated Documents - July 10, 2025•Document ID: 11020741Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-128-25 REV. A
- Date Added:
- July 17, 2025
- Manufacturer:
- JEEP
SummaryFlash: Battery Pack Control Module (BPCM) Updates 6A2 Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0DE6 - Hybrid/EV Battery Pack Cell Voltage Low. NOTE: Active or stored. ● P1DAF - Incompatible Limp In Action Requested. NOTE: Active or stored. ● P1CDE – Hybrid/EV Wakeup Control 2 Output Circuit Short to Ground. ● P1CDA – Hybrid/EV Wakeup Control 1 Output Circuit/Open. ● U00C6 – Lost Communication With AIR Pressure Sensor. ● P0F00 - Hybrid/EV Battery Module 1 Performance. ● P0F01 - Hybrid/EV Battery Module 2 Performance. ● P0F02 - Hybrid/EV Battery Module 3 Performance. ● P0F03 - Hybrid/EV Battery Module 4 Performance. ● P0F04 - Hybrid/EV Battery Module 5 Performance. ● P0F05 - Hybrid/EV Battery Module 6 Performance. ● P0F06 - Hybrid/EV Battery Module 7 Performance. ● P0F07 - Hybrid/EV Battery Module 8 Performance. ● P0F08 - Hybrid/EV Battery Module 9 Performance. ● P0F09 - Hybrid/EV Battery Module 10 Performance. ● P0F0A - Hybrid/EV Battery Module 11 Performance. ● P0F0B - Hybrid/EV Battery Module 12 Performance. ● P0F0C - Hybrid/EV Battery Module 13 Performance. ● P0CA6-00 - Hybrid/EV Battery Charging Current High. NOTE: If the following DTCs are present/active in the BPCM, Battery Pack replacement will be required. Guided Diagnostics will prompt you for the repair action if the diagnostic is present on the vehicle. ● P0ADB-00 - Hybrid/EV Battery Positive Contractor A Control Circuit Low. ● P0AE2-00 - Hybrid/EV Battery Precharge Contactor Circuit Stuck Closed. ● P0AA1-00 - Hybrid/EV Battery Positive Contactor "A" Stuck Closed. ● P0FF8-00 - Hybrid/EV Battery Precharge Contactor Circuit "B" Stuck Closed. Customers may also comment on one or more of the following: ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Vehicle will not enter Drive Ready Mode. This bulletin also includes the following software enhancements: ● Bootloader update to prevent battery disconnect unit damage. ● Improvements in detecting pre-existing battery disconnect unit damage. ● Charging related enhancements that may lead to DTC P0CA6 falsely setting. This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine.
Associated Products (1)Associated Documents - July 10, 2025•Document ID: 11020740Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-127-25 REV. B
- Date Added:
- July 17, 2025
- Manufacturer:
- JEEP
SummaryFlash: Electronic Vehicle Control Unit (EVCU) Updates 6A2 Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● C10FA-00 - Wheel Hub disconnect Actuator Performance Left. ● C10FB-00 - Wheel Hub disconnect Actuator Performance Right. ● C10F8-00 - Left Front Wheel Hub Disconnect Actuator Position Sensor Circuit Range/Performance. ● C10F9-00 - Right Front Wheel Hub Disconnect Actuator Position Sensor Circuit Range/Performance. ● P061B-00 - Internal Control Module Torque Calculation Performance. Customers may also comment on one or more of the following: ● Instrument Panel Cluster (IPC), radio range and charge time estimations and messages are not correct. ● Battery range incorrect. ● Improved battery State of Charge (SoC) accuracy in off-nominal conditions. ● Battery heating values incorrect on radio when on Performance Pages display. ● Charging does not start when plugged in. ● Charging is not indicating when battery is at full charge. ● Charging slow or takes too long. ● Bumps and jerks while accelerating or decelerating. ● Wrench icon is illuminated on the IPC. ● Turtle icon is illuminated on the IPC. ● Vehicle enters into limp home mode. In addition, the following software enhancement is also available: ● Enables compatibility with the Flo V3 Chargers. This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine.
Associated Products (1)Associated Documents - July 10, 2025•Document ID: 11020738Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-078-25 REV. B
- Date Added:
- July 17, 2025
- Manufacturer:
- JEEP
SummaryRSU With Additional Sleep Cycles for HV Battery Integrity Check - Flash: Motor Control Processor A (MCP A) Updates 11A2 Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): ● P1626-00 - Park Pawl Motor Stuck. Customers may also comment on one or more of the following: ● Wrench lamp on in the Instrument Panel Cluster (IPC). ● Not able to move the shifter out of Park. ● Vehicle has reduced power. This bulletin also includes the following software enhancement: ● Software enhancement to prevent erroneous fault identification resulting in inverter shutdown
Associated Products (1)Associated Documents - July 10, 2025•Document ID: 11020737Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-077-25 REV. C
- Date Added:
- July 17, 2025
- Manufacturer:
- JEEP
SummaryRSU With Additional Sleep Cycles for HV Battery Integrity Check - Flash: Motor Control Processor B (MCP B) Updates 11A2 Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): ● P1626-00 - Park Pawl Motor Stuck. Customers may also comment on one or more of the following: ● Wrench lamp on in the Instrument Panel Cluster (IPC). ● Not able to move the shifter out of Park. ● Vehicle has reduced power. This bulletin also includes the following software enhancement: ● Software enhancement to prevent erroneous fault identification resulting in inverter shutdown This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine.
Associated Products (1)Associated Documents - July 10, 2025•Document ID: 11020736Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-076-25 REV. C
- Date Added:
- July 17, 2025
- Manufacturer:
- JEEP
SummaryRSU With Additional Sleep Cycles for HV Battery Integrity Check - Flash: Battery Pack Control Module (BPCM) Updates 11A2 Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0DE6 - Hybrid/EV Battery Pack Cell Voltage Low. NOTE: Active or stored. ● P1DAF - Incompatible Limp In Action Requested. NOTE: Active or stored. ● P1CDE – Hybrid/EV Wakeup Control 2 Output Circuit Short to Ground. ● P1CDA – Hybrid/EV Wakeup Control 1 Output Circuit/Open. ● U00C6 – Lost Communication With AIR Pressure Sensor. ● P0F00 - Hybrid/EV Battery Module 1 Performance. ● P0F01 - Hybrid/EV Battery Module 2 Performance. ● P0F02 - Hybrid/EV Battery Module 3 Performance. ● P0F03 - Hybrid/EV Battery Module 4 Performance. ● P0F04 - Hybrid/EV Battery Module 5 Performance. ● P0F05 - Hybrid/EV Battery Module 6 Performance. ● P0F06 - Hybrid/EV Battery Module 7 Performance. ● P0F07 - Hybrid/EV Battery Module 8 Performance. ● P0F08 - Hybrid/EV Battery Module 9 Performance. ● P0F09 - Hybrid/EV Battery Module 10 Performance. ● P0F0A - Hybrid/EV Battery Module 11 Performance. ● P0F0B - Hybrid/EV Battery Module 12 Performance. ● P0F0C - Hybrid/EV Battery Module 13 Performance. ● P0CA6-00 - Hybrid/EV Battery Charging Current High. NOTE: If the following DTCs are present/active in the BPCM, Battery Pack replacement will be required. Guided Diagnostics will prompt you for the repair action if the diagnostic is present on the vehicle. ● P0ADB-00 - Hybrid/EV Battery Positive Contractor A Control Circuit Low. ● P0AE2-00 - Hybrid/EV Battery Precharge Contactor Circuit Stuck Closed. ● P0AA1-00 - Hybrid/EV Battery Positive Contactor "A" Stuck Closed. ● P0FF8-00 - Hybrid/EV Battery Precharge Contactor Circuit "B" Stuck Closed. Customers may also comment on one or more of the following: ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Vehicle will not enter Drive Ready Mode. This bulletin also includes the following software enhancement: ● Bootloader update to prevent battery disconnect unit damage. ● Improvements in detecting pre-existing battery disconnect unit damage. ● Charging related enhancements that may lead to DTC P0CA6 falsely setting. This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine.
Associated Products (1)Associated Documents - July 10, 2025•Document ID: 11020735Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-074-25 REV. C
- Date Added:
- July 17, 2025
- Manufacturer:
- JEEP
SummaryRSU With Additional Sleep Cycles for HV Battery Integrity Check - Flash: Electronic Vehicle Control Unit (EVCU) Updates 11A2 Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● C10FA-00 - Wheel Hub disconnect Actuator Performance Left. ● C10FB-00 - Wheel Hub disconnect Actuator Performance Right. ● C10F8-00 - Left Front Wheel Hub Disconnect Actuator Position Sensor Circuit Range/Performance. ● C10F9-00 - Right Front Wheel Hub Disconnect Actuator Position Sensor Circuit Range/Performance. ● P061B-00 - Internal Control Module Torque Calculation Performance. Customers may also comment on one or more of the following: ● Instrument Panel Cluster (IPC), radio range and charge time estimations and messages are not correct. ● Battery range incorrect. ● Improved battery State of Charge (SoC) accuracy in off-nominal conditions. ● Battery heating values incorrect on radio when on Performance Pages display. ● Charging does not start when plugged in. ● Charging is not indicating when battery is at full charge. ● Charging slow or takes too long. ● Bumps and jerks while accelerating or decelerating. ● Wrench icon is illuminated on the IPC. ● Turtle icon is illuminated on the IPC. ● Vehicle enters into limp home mode. In addition, the following software enhancement is also available: ● Enables compatibility with the Flo V3 Chargers
Associated Products (1)Associated Documents