2023-2024 BMW X1/X2 PDC Display Error (SIB 65 05 24)

2023-2024 BMW X1/X2 PDC Display Error SIB 65 05 24

BMW SIB 65 05 24 details a software issue in the head unit (HU-H6) that can cause the "NO PDC DISPLAY WHEN REAR VIEW CAMERA IS ACTIVATED" message or errors in the Park Distance Control (PDC) display for 2023-2024 BMW X1 and X2 models. A software update is required to fix the BMW X1 PDC display…

Marcus Weber2024 BMW X1April 30, 2026

Q: What causes the "NO PDC DISPLAY WHEN REAR VIEW CAMERA IS ACTIVATED" message in my 2023-2024 BMW X1 or X2? A: The "NO PDC DISPLAY WHEN REAR VIEW CAMERA IS ACTIVATED" message or errors in the Park Distance Control (PDC) display are caused by unfavorable software in the head unit (HU-H6), which can be resolved by a software update detailed in BMW Service Information Bulletin SIB 65 05 24.

## Symptoms of the BMW X1 PDC Display Error

Owners of affected BMW X1 and X2 vehicles may notice a specific issue related to their Park Distance Control (PDC) system. When the rear view camera is activated, the "Park Distance Control (PDC) display on the central information display (CID) may not display, or may display with errors." This can manifest as the verbatim message "NO PDC DISPLAY WHEN REAR VIEW CAMERA IS ACTIVATED" appearing on the screen.

## Cause of the BMW X1 PDC Display Error

The root cause of this display malfunction is identified as unfavorable software residing within the vehicle's head unit, specifically the HU-H6 module. This software anomaly prevents the PDC display from functioning correctly when the rear view camera is in use.

## Important Warnings for Owners and Technicians

BMW has issued specific guidelines regarding this software update. If your vehicle's current I-level software version is already at U006-24-03-530 or a more recent version, the vehicle should not be programmed for this issue. Instead, technicians should proceed with standard diagnostic procedures to identify any other potential causes for the display problem.

Additionally, during any programming procedure, it is crucial to "Always connect a BMW-approved battery charger/power supply (SI B04 23 10)." This ensures stable voltage throughout the update process, preventing potential damage or interruptions.

## Repair Procedure Summary

To address the BMW X1 PDC display error, technicians must first determine the vehicle's current I-level software version. This check is performed using either the AIR or AWP (Aftersales Workplace) applications.

If the I-level is found to be lower than U006-24-03-530, the vehicle's head unit (HU-H6) must be programmed. The target software version is I-level U006-24-03-530 or higher, utilizing ISTA 4.46.21 (or a more recent release). The programming process involves connecting a battery charger and the ISTA 4 programming system to the vehicle. Technicians will then determine and execute a measures plan, ensuring all control units are programmed and encoded as necessary. Following the update, a vehicle test is performed, and any stored fault memory is cleared. The repair code associated with this specific fix is 6512580200.

## Required Tools or Parts

The primary tools required for this repair include a BMW-approved battery charger or power supply, as detailed in SI B04 23 10. Additionally, the ISTA 4 programming system, specifically version 4.46.21 or newer, is essential for performing the software update on the head unit.

## Owner Action

If you own a 2023-2024 BMW X1 or X2 and are experiencing the "NO PDC DISPLAY WHEN REAR VIEW CAMERA IS ACTIVATED" message or any other Park Distance Control display issues when the rear camera is active, you should contact an authorized BMW dealership. Explain the symptoms, mentioning the potential software issue in the HU-H6 head unit. The dealership will be able to diagnose the vehicle's current software I-level and perform the necessary update as outlined in BMW Service Information Bulletin SIB 65 05 24. This repair is typically covered under warranty.

Source: NHTSA ID 10250376

Frequently Asked Questions

What is the specific issue addressed by BMW SIB 65 05 24?

BMW SIB 65 05 24 addresses a software issue in the head unit (HU-H6) that causes the "NO PDC DISPLAY WHEN REAR VIEW CAMERA IS ACTIVATED" message or errors in the Park Distance Control (PDC) display when the rear view camera is active.

Which BMW models are affected by the BMW X1 PDC display error?

This issue affects 2024 BMW X1 (U11) and 2023 BMW X2 (U10) models equipped with the HU-H6 head unit.

How is the BMW X1 PDC display error resolved?

The issue is resolved by updating the vehicle's head unit (HU-H6) software to I-level U006-24-03-530 or higher using the ISTA programming system at a BMW dealership.

Will I be charged for this software update?

This software update is typically covered under the BMW New Vehicle Limited Warranty or BMW Certified Pre-Owned Program, meaning it should be performed free of charge by an authorized BMW dealership.

2023-2024 BMW X1/X2 PDC Display Error SIB 65 05 24

Frequently Asked Questions

Related Articles

2023-2024 BMW X1/X2 Rear Axle Wheel Bearing Noise & Faults

2024 BMW X1/X2 FC 034AEF Exhaust Cold Start Not Controllable

2024-2026 BMW X1/X2 DKG Transmission Oil Service TSB

2024-2026 BMW X1/X2 Power Windows & Mirrors Not Functioning

2024-2025 BMW X1, X2, X3 Android Auto Connection Issues

Yorumlar

Yorum bırakın

Şu araçlar için de geçerli

Frequently Asked Questions

Related Articles

2023-2024 BMW X1/X2 Rear Axle Wheel Bearing Noise & Faults

2024 BMW X1/X2 FC 034AEF Exhaust Cold Start Not Controllable

2024-2026 BMW X1/X2 DKG Transmission Oil Service TSB

2024-2026 BMW X1/X2 Power Windows & Mirrors Not Functioning

2024-2025 BMW X1, X2, X3 Android Auto Connection Issues

Yorumlar

Yorum bırakın