Hyundai · Model Report
Showing safety data for the 2009 model year only.
Hyundai Motor America (Hyundai) is recalling certain 2007-2010 Elantra and 2009-2011 Elantra Touring vehicles. On February 21, 2020 Hyundai expanded the recall to include 46,425 model year 2007-2008 Entourage and 2007 Santa Fe vehicles. Moisture may enter the Anti-lock Brake (ABS) Module and result in an electrical short.
Hyundai Motor America (Hyundai) is recalling certain model year 2008-2010 Elantra vehicles manufactured June 1, 2008, to April 30, 2010, and 2009-2010 Elantra Touring vehicles manufactured November 1, 2008, to April 30, 2010. The electronic power steering (EPS) electronic control unit (ECU) may sense a discrepancy in the steering input signals and, as a result, disable the steering power assist.
Hyundai Motor Company (Hyundai) is recalling certain model year 2006-2009 Accent, model year 2007-2011 Azera, Sonata and Sante Fe,2006-2011 Tucson, 2009-2011 Elantra Touring, 2007-2010 Elantra, 2008-2011 Veracruz, 2009-2011 Genesis, 2010-2011 Genesis Coupe, 2007-2008 Entourage, and 2006-2008 Tiburon vehicles. Originally, in April 2013, Hyundai recalled 1,059,824 model year 2007-2009 Accent and Tucson, model year 2007-2010 Elantra, model year 2007-2011 Santa Fe, model year 2008-2009 Veracruz, model year 2010-2011 Genesis Coupe, and model year 2011 Sonata vehicles. In September 2013, Hyundai informed the agency that it was adding more vehicles to this campaign, representing an additional 652,512 units. The total number of vehicles being recalled is now 1,712,336. In the affected vehicles, the stop lamp switch may malfunction. A malfunctioning stop lamp switch may cause the brake lights to not illuminate when the brake pedal is depressed or may cause an inability to deactivate the cruise control by depressing the brake pedal. Additionally, a malfunctioning stop lamp switch may also result in intermittent operation of the push-button start feature, affect the operation of the brake transmission shift interlock feature, preventing the shifter from being moved out of the PARK position and cause the Electronic Stability Control (ESC) malfunction light to illuminate.
HYUNDAI IS RECALLING CERTAIN MODEL YEAR 2007-2009 ELANTRA VEHICLES MANUFACTURED FROM JULY 14, 2006, THROUGH NOVEMBER 1, 2008. THE FRONT PASSENGER SEATS IN THE VEHICLES CONTAIN A WEIGHT SENSOR DESIGNED TO DEACTIVATE THE RIGHT FRONTAL AIRBAG WHEN OCCUPANTS OF CERTAIN WEIGHTS OCCUPY THE SEAT. THE ELECTRICAL CONNECTOR FOR THE WEIGHT SENSOR IS LOCATED UNDER THE CENTER CONSOLE, BETWEEN THE FRONT SEATS. UNDER CERTAIN CIRCUMSTANCES THE CONNECTOR COULD BECOME CONTAMINATED AND MALFUNCTION SUCH THAT THE FRONT PASSENGER AIRBAG WILL DEPLOY REGARDLESS OF THE WEIGHT OF THE OCCUPANT.
The Anti-Lock Braking System (ABS) module has failed due to moisture intrusion that caused an internal electrical short circuit, destroying the ABS Primary Pressure Sensor. A few days after the vehicle was parked outside during heavy rain, I was driving on a busy highway when it suddenly lost engine power. During this emergency, I had to perform heavy braking and maneuver to the shoulder without engine assist. At the same time, the ABS and Electronic Stability Control (ESC) systems suddenly disabled completely. This failure is consistent with the safety defect described in NHTSA Campaign 20V-061 (Recall 188), which acknowledges that these ABS modules can permit moisture intrusion. However, Hyundai's remedy, installing a fuse relay, only cuts battery power while the vehicle is parked to reduce fire risk; it does not seal or repair the ABS module. Moisture from the heavy rain entered the module while the vehicle was parked and ultimately shorted the internal pressure sensor while driving, disabling critical braking and stability systems. Two independent third-party sources (an ASE-certified mechanic and a commercial automotive diagnostic scanner) identified codes C1237 (ABS Primary Pressure Sensor Signal), C1513, and C1260. Both confirmed an internal electrical failure of the ABS module. At Hyundai Corporate Consumer Affairs’ direction, the vehicle was inspected by an authorized Hyundai dealership. The dealership did not perform the required dynamic road test needed to reproduce the active ABS faults, and claimed there was only C1260 and not an ABS malfunction. The invoice documents identical mileage in and out, and video shows diagnostics performed while the vehicle was stationary with the engine off. Approximately 15 minutes later, an independent scanner successfully retrieved C1237, C1513, and C1260. Despite this evidence, Hyundai Consumer Affairs refused to repair the failed ABS module, characterizing it as a “maintenance item.”
No injuries · No fire · No crash
The contact owns a 2009 Hyundai Elantra. The contact stated that while driving 55 MPH on the highway, the vehicle lost power steering assist. The power steering assist warning light was illuminated during the failure. The contact pulled over to the side of the road, turned off and restarted the vehicle; however, the failure persisted. The contact was able to continue driving, although the steering wheel was difficult to turn. The vehicle was taken to an independent mechanic; however, the cause of the failure could not be determined; however, the mechanic associated the failure with NHTSA Campaign Number: 15V100000 (Steering) and referred the contact to the manufacturer for assistance. The failure mileage was approximately 46,000.
No injuries · No fire · No crash
I am reporting Hyundai’s failure to complete open Campaign 127/NHTSA Recall 15V-100 on my 2009 Hyundai Elantra. I acquired the vehicle from a family member in late July 2026 after the previous owner died and the vehicle was delayed in probate. I sought recall service immediately after legal transfer. Component/system: The Electronic Power Steering (EPS) failed. Power steering assist is completely unavailable. The EPS warning lamp is illuminated and the EPS module reports DTC C1604. The vehicle and EPS system remain at [XXX] Hyundai in [XXX] and are available for inspection upon request. Safety risk: The vehicle was driven from [XXX] to [XXX] during transportation during its transfer to me, and the power steering failed en route. Loss of steering assist substantially increased steering effort suddenly& created a safety risk to the driver, passengers and other motorists. Dealer confirmation: Yes. The condition is recognized by [XXX] Hyundai. I presented the vehicle on XXX specifically for the open EPS recall, and it has remained there since. This is the second area Hyundai dealer that attempted to decline recall service. [XXX] states it cannot perform the prescribed software update because the required Hyundai tablet/programming equipment is no longer available. The dealer has also pressured me to retrieve the unrepaired vehicle and attempted to charge for diagnostics. Other inspections: Hyundai Consumer Affairs is involved under case #XXX. No police or insurance representative has inspected the vehicle. Hyundai’s latest update is that it is attempting to source either the required computer or part, but no remedy or completion date has been provided. Warnings/symptoms: When the EPS failed, the EPS warning lamp illuminated and steering assist was lost. OBD-II/EPS diagnostics subsequently identified C1604. The vehicle has been continuously available for recall repair since XXX. Thank you for your review & assistance with this. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
No injuries · No fire · No crash
Power steering assist motor stopped working, leaving the car with hard manual steering. Dealer inspection confirms the issue across several year models, inclding my 2009. There were 2 other year models with the same issue in their shop with mine that day. One was 2018. One was a 2023. Car is very difficult to steer around curves at any speed. Warning lamp on dash says "EPS".
No injuries · No fire · No crash
The contact owns a 2009 Hyundai Elantra. The contact received notification of NHTSA Campaign Number: 20V061000 (Service Brakes, Hydraulic). The contact stated that while driving approximately 35 MPH, the TPMS and powertrain warning lights illuminated, but the vehicle drove normally. The contact stated that a month later, while the vehicle was parked and turned off, a pedestrian saw smoke coming from the engine compartment. The contact arrived at the scene, and the Police and Fire Department were already on scene. The contact stated that a fireman entered the vehicle and opened the hood, and disconnected the battery. A Police report was filed. The contact inspected the vehicle, reconnected the battery, and there was smoke coming from the ABS module inside the engine compartment. The contact then disconnected the battery. The battery was later reconnected, and the vehicle was driven to the residence. The contact arrived at the residence and removed the ABS fuse, and the smoke ceased. The vehicle was taken to an auto shop where a handheld diagnostic machine retrieved DTC: P0441 (EVAP system incorrect purge flow). The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was 168,000.
No injuries · No fire · No crash