Boletín de servicio

2024 Jeep Wrangler Key Fob Range Issue Explained

A manufacturer communication, NHTSA ID 10248895, addresses a condition in the 2024 Jeep Wrangler where key fob functions for remote start, unlock, and lock only operate near the vehicle.

Byeditor david chen2024 Jeep Wrangler
2024 Jeep Wrangler — 2024 Jeep Wrangler manufacturer_communication
Editorial illustration generated for this article.
2024 Jeep Wrangler key fob rangeJeep Wrangler remote start rangeJeep Wrangler key fob unlock rangeJeep Wrangler key fob lock rangeKey Fob Functions for Remote Start, Unlock and Lock Only Operate Near the VehicleNHTSA ID 10248895Jeep Wrangler electrical systemJeep Wrangler immobilizerJeep Wrangler anti-theft2024 Jeep Wrangler manufacturer_communication

Owners of the 2024 Jeep Wrangler may notice that their key fob's remote start, unlock, and lock functions have a significantly reduced operating range. This means the key fob only works when the owner is very close to the vehicle, which can be inconvenient for daily use. This condition is the subject of a manufacturer communication, NHTSA ID 10248895, for the 2024 Jeep Wrangler manufacturer_communication.

Symptoms

The primary symptom is a limited range for key fob operations. Specifically, owners will observe that the "Key Fob Functions for Remote Start, Unlock and Lock Only Operate Near the Vehicle." This affects the convenience features of the vehicle, requiring proximity for basic remote actions.

Diagnosis / Trigger Conditions

This manufacturer communication describes a specific condition rather than a fault code. The condition is simply that the key fob's range for remote start, unlock, and lock is limited. There are no specific trigger conditions mentioned beyond the inherent operational characteristic or issue being described for the 2024 Jeep Wrangler manufacturer_communication.

Repair Procedure Summary

While the provided summary for NHTSA ID 10248895 describes the condition, it does not detail a specific repair procedure. Manufacturer communications often serve to inform dealerships about known issues, operational characteristics, or diagnostic steps. If you are experiencing this limited key fob range with your 2024 Jeep Wrangler manufacturer_communication, it's important to have your vehicle inspected by an authorized Jeep service center. They can access the full details of this communication and determine if any diagnostic or service actions are recommended.

Owner Action

If you own a 2024 Jeep Wrangler and are experiencing a limited operating range for your key fob's remote start, unlock, or lock functions, it is recommended to contact your local authorized Jeep dealership. Inform them about the issue and reference manufacturer communication NHTSA ID 10248895. The dealership can perform a diagnosis and advise on any necessary steps or if this is considered a normal operational characteristic for your vehicle.


Source: NHTSA ID: 10248895

Frequently Asked Questions

What is the issue with the 2024 Jeep Wrangler key fob range?
A manufacturer communication, NHTSA ID 10248895, indicates that the key fob functions for remote start, unlock, and lock may only operate when the owner is near the 2024 Jeep Wrangler.
Is this a recall for the 2024 Jeep Wrangler?
No, this is a manufacturer communication (TSB), not a recall. It informs dealerships about a known condition regarding the key fob range for the 2024 Jeep Wrangler.
What should I do if my 2024 Jeep Wrangler key fob has limited range?
You should contact your authorized Jeep dealership and describe the issue. Reference manufacturer communication NHTSA ID 10248895 for your 2024 Jeep Wrangler so they can investigate and provide guidance.
Does this issue affect all key fob functions?
The communication specifically mentions that "Key Fob Functions for Remote Start, Unlock and Lock Only Operate Near the Vehicle," indicating these are the primary functions affected by the limited range.

Related Articles

2024 Jeep Wrangler Problems: Recalls, Complaints & TSBs

The 2024 Jeep Wrangler has faced four safety recalls, primarily concerning exterior lighting and airbag deployment. While no owner complaints or federal investigations have been reported, twenty manufacturer service bulletins address various issues from engine performance and electrical glitches…

2024-2026 Jeep, Ram, Dodge Cylinder Head Bolt Inspection

Mopar has issued a Quality Inspection Request (QIR) concerning cylinder head cover bolts, part number 04893799AJ, for various 2024-2026 Jeep, Ram, and Dodge models. Dealers are instructed to identify and quarantine suspect bolts with a chamfered flange.

2024 Jeep Wrangler PCM Update for Misfire & O2 Sensor DTCs

A Technical Service Bulletin (TSB 18-003-26 REV. A) has been issued for the 2024 Jeep Wrangler to address various engine performance issues, including misfires, rough idle, and O2 sensor fault codes. This update involves reprogramming the Powertrain Control Module (PCM).

2021-2026 Jeep Wrangler / Gladiator Wind Noise TSB S2623000018

This technical service bulletin, S2623000018, addresses "Wind Noise From Hard Top Freedom Panels Near Rear View Mirror While Driving" in 2021-2026 Jeep Wrangler and Gladiator models, detailing a diagnostic and repair procedure involving the header seal.

2024 Jeep Wrangler Heated Steering Wheel Not Working TSB

If your 2024 Jeep Wrangler's heated steering wheel isn't working or isn't warm enough, Technical Service Bulletin (TSB) 08-121-26 from Stellantis outlines a software update for the Comfort Seat Wheel Module (CSWM) to resolve the issue.

Comments

Be the first to comment.

Leave a comment

Comments are moderated and may take a moment to appear. Only your first name and the initial of your last name are shown publicly.

Verifying you are human...