2024 Jeep Wrangler Key Fob Range Issue Explained
A manufacturer communication, NHTSA ID 10248895, addresses a condition in the 2024 Jeep Wrangler where key fob functions for remote start, unlock, and lock only operate near the vehicle.
Owners of the 2024 Jeep Wrangler may notice that their key fob's remote start, unlock, and lock functions have a significantly reduced operating range. This means the key fob only works when the owner is very close to the vehicle, which can be inconvenient for daily use. This condition is the subject of a manufacturer communication, NHTSA ID 10248895, for the 2024 Jeep Wrangler manufacturer_communication.
Symptoms
The primary symptom is a limited range for key fob operations. Specifically, owners will observe that the "Key Fob Functions for Remote Start, Unlock and Lock Only Operate Near the Vehicle." This affects the convenience features of the vehicle, requiring proximity for basic remote actions.
Diagnosis / Trigger Conditions
This manufacturer communication describes a specific condition rather than a fault code. The condition is simply that the key fob's range for remote start, unlock, and lock is limited. There are no specific trigger conditions mentioned beyond the inherent operational characteristic or issue being described for the 2024 Jeep Wrangler manufacturer_communication.
Repair Procedure Summary
While the provided summary for NHTSA ID 10248895 describes the condition, it does not detail a specific repair procedure. Manufacturer communications often serve to inform dealerships about known issues, operational characteristics, or diagnostic steps. If you are experiencing this limited key fob range with your 2024 Jeep Wrangler manufacturer_communication, it's important to have your vehicle inspected by an authorized Jeep service center. They can access the full details of this communication and determine if any diagnostic or service actions are recommended.
Owner Action
If you own a 2024 Jeep Wrangler and are experiencing a limited operating range for your key fob's remote start, unlock, or lock functions, it is recommended to contact your local authorized Jeep dealership. Inform them about the issue and reference manufacturer communication NHTSA ID 10248895. The dealership can perform a diagnosis and advise on any necessary steps or if this is considered a normal operational characteristic for your vehicle.
Source: NHTSA ID: 10248895
Frequently Asked Questions
- What is the issue with the 2024 Jeep Wrangler key fob range?
- A manufacturer communication, NHTSA ID 10248895, indicates that the key fob functions for remote start, unlock, and lock may only operate when the owner is near the 2024 Jeep Wrangler.
- Is this a recall for the 2024 Jeep Wrangler?
- No, this is a manufacturer communication (TSB), not a recall. It informs dealerships about a known condition regarding the key fob range for the 2024 Jeep Wrangler.
- What should I do if my 2024 Jeep Wrangler key fob has limited range?
- You should contact your authorized Jeep dealership and describe the issue. Reference manufacturer communication NHTSA ID 10248895 for your 2024 Jeep Wrangler so they can investigate and provide guidance.
- Does this issue affect all key fob functions?
- The communication specifically mentions that "Key Fob Functions for Remote Start, Unlock and Lock Only Operate Near the Vehicle," indicating these are the primary functions affected by the limited range.
What Jeep Wrangler owners report
Counted from the records in our database across 41 model years.
- 18,838
- Owner complaints
- 104
- Recalls
- 2,758
- Service bulletins
- 572
- Crashes reported
- 552
- Fires reported
- 435
- Injuries reported
The 2024 model year
970 complaints, the 4th most of 41 model years on file. Owners reported 14 crashes, 13 fires and 7 injuries for this year, which also has 14 recalls on file.
Electrical System, the system this article covers, accounts for 3,613 of 18,838 complaints (19%), including 568 for 2024.
Complaints by model year
| 2006 | 730 | |
|---|---|---|
| 2007 | 1,750 | |
| 2008 | 1,904 | |
| 2010 | 686 | |
| 2012 | 836 | |
| 2014 | 658 | |
| 2018 | 1,827 | |
| 2019 | 747 | |
| 2021 | 963 | |
| 2024 | 970 |
Most-reported systems
- Steering — 3,929
- Electrical System — 3,613
- Power Train — 2,470
- Engine — 2,406
- Fuel System — 2,015
Latest recalls for the 2024 model year
- 26V363000 — Steering (Jun 2026) — Park outside
- 26V327000 — Back Over Prevention (May 2026)
- 25V766000 — Engine (Nov 2025)
Recent owner reports about electrical system
Since the 68C Recall software update was performed on my Jeep, the vehicle has experienced recurring, unexpected losses of motive power while driving in Electric Mode. During these events, pressing the accelerator yields no response.
Read owner complaints →The contact owns a 2024 Jeep Wrangler. The contact received notification of NHTSA Campaign Number: 25V710000 (ELECTRICAL SYSTEM); however, the part to do the recall repair was unavailable.
Complaints are owner reports filed with NHTSA. They are unverified, and counts depend on how many vehicles were sold, so they are not a failure rate.
Related Articles
What's Going Wrong with the 2024 Jeep Wrangler: Recalls & Bulletins
The 2024 Jeep Wrangler has been subject to four safety recalls, primarily concerning lighting systems and the driver's airbag. Owners should also be aware of several manufacturer service bulletins addressing issues like engine performance, heated steering wheel malfunctions, and rear axle oil…
2024-2027 Jeep Wrangler A/C Not Working Issue (9100935)
For 2024-2027 Jeep Wrangler owners experiencing A/C issues like hot air or a non-operating A/C relay clutch, manufacturer communication 9100935 outlines a simple fix: a battery disconnection to reset the PCM, warning against unnecessary Power Distribution Center (PDC) replacements.
2024 Jeep Wrangler 4WD System Warning & DTC C147B-92 TSB
Jeep has issued TSB 08-355-26 for certain 2024 Wrangler models to address issues with the 4WD system, including warning lights, MIL illumination, and DTC C147B-92. The fix involves a software update to the Drivetrain Control Module (DTCM).
2024-2026 Jeep, Ram, Dodge Cylinder Head Bolt Inspection
Mopar has issued a Quality Inspection Request (QIR) concerning cylinder head cover bolts, part number 04893799AJ, for various 2024-2026 Jeep, Ram, and Dodge models. Dealers are instructed to identify and quarantine suspect bolts with a chamfered flange.
2024 Jeep Wrangler PCM Update for Misfire & O2 Sensor DTCs
A Technical Service Bulletin (TSB 18-003-26 REV. A) has been issued for the 2024 Jeep Wrangler to address various engine performance issues, including misfires, rough idle, and O2 sensor fault codes. This update involves reprogramming the Powertrain Control Module (PCM).
Leave a comment
Comments are moderated and may take a moment to appear. Only your first name and the initial of your last name are shown publicly.
Comments
Be the first to comment.