Toyota · Model Report
Showing safety data for the 2005 model year only.
Tenneco Automotive (DRiV) is recalling certain aftermarket ball joints for 2004-2007 Toyota Sequoia and 2004-2006 Toyota Tundra vehicles, MOOG part number K80521, K80522, NAPA part number NCP2601633, NCP2601634, ACDelco part number 45D2344, and 45D2345. The ball joint housing may have inadequate hardness, causing premature failure.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2010-2016 4Runner, 2003-2006 Tundra, 2003-2013 Corolla, 2009-2010 Corolla Matrix, 2004-2005 RAV4, 2002-2007 Sequoia, 2011-2013 Sienna, 2008-2012 Scion xB, 2008-2009 Lexus IS-F, 2007-2012 Yaris and Lexus ES350, 2010-2017 Lexus GX460, 2002-2010 Lexus SC430, 2006-2012 Lexus IS250 and IS350 and 2010-2015 Lexus IS250C and IS350C vehicles. These vehicles had their driver or passenger frontal air bag inflators previously replaced under a prior recall using inflators of the same design. The inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2002-2005 Lexus SC and Toyota Sequoia, 2003-2005 Toyota Corolla and Tundra, and 2003-2007 Pontiac Vibe vehicles. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation.
Southeast Toyota Distributors, LLC (SET) is recalling certain 2005-2011 4Runner, Highlander, Sequoia, and Sienna, 2005-2010 Avalon and Tundra, 2006-2008 Camry Solara, 2006-2010 Highlander hybrid, 2006-2011 Rav4 and Tacoma, 2007-2010 FJ Cruiser, 2007-2011 Camry hybrid, 2009-2010 Venza, 2010-2012 Prius, 1988-1990 and 2005-2010 Camry, and 1989 and 2009-2010 Corolla vehicles equipped with aftermarket accessory seat heaters with a copper strand heating element. The electrical wiring in the seat heaters may be damaged when the seat cushion is compressed.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2003-2006 Toyota Land Cruiser and Lexus LX470, 2005-2006 Toyota Tundra and Sequoia, 2004-2006 Toyota 4Runner and Lexus GX470 vehicles equipped with side curtain-shield-air bags. The affected vehicles have an air bag control module that may be improperly programmed, causing the side curtain-shield-air bags to deploy inadvertently.
frame and brake systems are severely rusted. has been undercoated many times but frame is rusting from inside out in the boxed portions and is delaminating from double layered reinforced areas. Toyota had a recall for some of these models but this one was not included for some reason. I have a 1997 model Toyota suv that has no rust compared to this 2005 model. Toyota needs to reopen this recall campaign as there are too many vehicles that have this same issue. This truck only has 119,000 miles. Failed a safety inspection at an independent tire store-frame rust and rear brake backing plates rusted and breaking apart. This truck is from the northern states and is currently in Florida.
No injuries · No fire · No crash
See attached document for complaint.
No injuries · No fire · No crash
My 2005 Toyota Tundra 4x4 Toyota’s frame is completely rusted out, with large rust holes in the frame. At 88,000 miles & is unsafe to drive. Many other people who have the same make and model are having the same problems. Toyota had a recall on the frame but I missed it as I have had a heart attack and kidney failure. I have reached out to multiple dealerships and Toyota’s main customer support in 2022 and even in the last week.. They refuse to do anything.
No injuries · No fire · No crash
The frame is so rusted in my truck my mechanic said it may snap at anytime and is not safe to drive. I know Toyota tundra’s from 2000-2003 have been recalled for same reason.
No injuries · No fire · No crash
This report addresses the critical structural integrity concerns related to excessive corrosion, and frame material loss affecting the main ladder frame chassis. The degradation of the frame members poses a significant and immediate safety risk, including potential catastrophic structural failure, detachment of critical components, and failure of safety systems (e.g., braking and fuel lines) mounted to the frame. Location: Mid-frame section (beneath the cab) and rear sections (near the leaf spring mounts and rear axle).
No injuries · No fire · No crash