Nissan Altima Service Bulletins

1,075 manufacturer communications on file.

March 9, 2018•Document ID: 10133211
Service Bulletin/Repair Instructions
EQUIPMENT:ELECTRICAL
Mfr Comm. #:
NTB18-023
Date Added:
April 16, 2018
Manufacturer:
NISSAN
Summary
NISSAN; MICROPHONE DOES NOT WORK This bulletin applies only to vehicles equipped with Telematics. IF YOU CONFIRM The microphone of an applied vehicle does not work. - The person receiving your call through Bluetooth® cannot hear you. And Voice Recognition does not respond to any commands. NOTE: DTCs U1A01 and/or U1A02 may be found stored. ACTION 1. Confirm TCU reprogramming will resolve the issue. - Refer to ?Issue Confirmation? on page 2. 2. If confirmed, reprogram the TCU.
Associated Products (7)
2018 Nissan Altima 2018 Nissan Armada 2018 Nissan Maxima 2018 Nissan Murano 2018 Nissan Pathfinder 2018 Nissan Rogue 2018 Nissan Titan
Associated Documents
- Download MC-10133211-0001.pdf↗
March 6, 2018•Document ID: 10134846
Service Bulletin/Repair Instructions
EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM)
Mfr Comm. #:
NTB15-009g
Date Added:
April 23, 2018
Manufacturer:
NISSAN
Summary
NAVIGATION SYMPTOMS WHEN SD CARD IS MISSING OR WRONG CARD INSTALLED This bulletin has been amended. The Applied Vehicles section has been revised, and changes have been made to the table beginning on page 5. No other changes have been made. Please discard previous versions of this bulletin.
Associated Products (13)
2018 Nissan Altima 2018 Nissan GT-R 2018 Nissan Leaf 2018 Nissan Maxima 2018 Nissan Murano 2017 Nissan GT-R 2017 Nissan Leaf 2017 Nissan Maxima 2017 Nissan Murano 2016 Nissan Leaf 2016 Nissan Maxima 2016 Nissan Murano 2015 Nissan Murano
Associated Documents
- Download MC-10134846-0001.pdf↗
March 5, 2018•Document ID: 10134858
Service Bulletin/Repair Instructions
EQUIPMENT; ENGINE
Mfr Comm. #:
NTB18-019
Date Added:
April 23, 2018
Manufacturer:
NISSAN
Summary
2013-2018 ALTIMA AND 2014-2018 ROGUE; ENGINE SUPPORT TOOLS SERVICE INFORMATION A new Engine Support Tool and Engine Support Bracket are now available to allow the CVT to be removed from the Applied Vehicles without having to remove the engine. The procedures in this bulletin are different than those that are currently in the Electronic Service Manual (ESM), which will be updated with this information at a later date. Please refer to the vehicle specific service procedure to use these new tools: Altima Page 2 Rogue AWD Page 11 Rogue FWD Page 24
Associated Products (11)
2018 Nissan Altima 2018 Nissan Rogue 2017 Nissan Altima 2017 Nissan Rogue 2016 Nissan Altima 2016 Nissan Rogue 2015 Nissan Altima 2015 Nissan Rogue 2014 Nissan Altima 2014 Nissan Rogue 2013 Nissan Altima
Associated Documents
- Download MC-10134858-0001.pdf↗
March 5, 2018•Document ID: 10133203
Service Bulletin/Repair Instructions
EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
Mfr Comm. #:
NTB17-039e
Date Added:
April 16, 2018
Manufacturer:
NISSAN
Summary
PATHFINDER, ALTIMA, MAXIMA, MURANO AND QUEST; CVT JUDDER AND DTC P17F0 OR P17F1 STORED This bulletin applies only to vehicles equipped with a V6 engine. This bulletin has been amended to add Quest to Applied Vehicles and information related to Quest on pages 25, 100, 102, 103 and 105. Please discard previous versions of this bulletin. IMPORTANT: You must read the entire bulletin to properly perform this repair.
Associated Products (18)
2017 Nissan Altima 2017 Nissan Maxima 2017 Nissan Murano 2017 Nissan Pathfinder 2017 Nissan Quest 2016 Nissan Altima 2016 Nissan Maxima 2016 Nissan Murano 2016 Nissan Pathfinder 2016 Nissan Quest 2015 Nissan Altima 2015 Nissan Murano 2015 Nissan Pathfinder 2015 Nissan Quest 2014 Nissan Altima 2014 Nissan Pathfinder 2013 Nissan Altima 2013 Nissan Pathfinder
Associated Documents
- Download MC-10133203-0001.pdf↗
March 1, 2018•Document ID: 10134857
Service Bulletin/Repair Instructions
ELECTRICAL SYSTEM:STARTER ASSEMBLY
Mfr Comm. #:
NTB18-018
Date Added:
April 23, 2018
Manufacturer:
NISSAN
Summary
2013-2015 ALTIMA; ROUGH IDLE ON START UP IF YOU CONFIRM Under the conditions listed below, when the engine is started it runs rough (rough idle) for a few seconds, and then will idle normally: - Ambient temperature is between 25°F and 45°F (-4°C - 7°C). - The engine has been OFF (not running) long enough for the engine to be close to the same temperature as the ambient temperature (about 6 hours). NOTE: This bulletin does not apply to the following issues: - Engine does not start. - Engine has a long crank time before starting. ACTION 1. Inspect the PCV valve (see page 2). - If the PCV valve is orange in color, replace it. - See the PARTS INFORMATION. - If the PCV valve is black in color, do not replace it. 2. Refer to step 6 in the SERVICE PROCEDURE to confirm if a reprogram is available for the vehicle you are working on. 3. If a reprogram is available, reprogram the ECM.
Associated Products (3)
2015 Nissan Altima 2014 Nissan Altima 2013 Nissan Altima
Associated Documents
- Download MC-10134857-0001.pdf↗
February 27, 2018•Document ID: 10130503
Service Bulletin/Repair Instructions
EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; POWER TRAIN
Mfr Comm. #:
NTB18-017
Date Added:
March 26, 2018
Manufacturer:
NISSAN
Summary
NISSAN; SERVICE INFORMATION FOR DTCS B2EF0 AND B130C This bulletin applies only to vehicles equipped with Telematics. SERVICE INFORMATION Diagnostic information in the Electronic Service Manuals (ESM) for the following DTCs may be missing or incorrect: -B2EF0 ? INTERNAL BATTERY (CIRC VOLT BELOW THRESHOLD) -B130C ? TCU (Telematics Control Unit) PAIRING ERROR If one of these DTCs is stored, follow the steps listed below along with the Electronic Service Manual (ESM) to compete the required repairs. DTC B2FE0 ? INTERNAL BATTERY (CIRC VOLT BELOW THRESHOLD): 1. Start the engine and let it idle for 30 minutes (to allow charging of the TCU internal battery). -2018 LEAF only: Put the vehicle in Ready to Drive mode (depress the brake pedal and depress the power [?ignition?] switch) for 30 minutes. 2. Verify the DTC can be erased. 3. If the DTC will not erase, replace the TCU. DTC B130C: 1. Collect all keys, and then re-register them to the vehicle. 2. Verify the DTC can be erased. 3. If the DTC will not erase, replace the TCU. NOTE: The related Electronic Service Manuals (ESM) will be updated at a later date. CLAIMS INFORMATION Refer to the current Nissan Warranty Flat Rate Manual and submit a claim for the repairs performed.
Associated Products (23)
2018 Nissan Altima 2018 Nissan Armada 2018 Nissan GT-R 2018 Nissan Leaf 2018 Nissan Maxima 2018 Nissan Murano 2018 Nissan Pathfinder 2018 Nissan Rogue 2018 Nissan Sentra 2018 Nissan Titan 2017 Nissan Altima 2017 Nissan GT-R 2017 Nissan Maxima 2017 Nissan Murano 2017 Nissan Pathfinder 2017 Nissan Rogue 2017 Nissan Sentra 2017 Nissan Titan 2016 Nissan Altima 2016 Nissan Maxima+ 3 more
Associated Documents
- Download MC-10130503-0001.pdf↗
February 16, 2018•Document ID: 10130490
Service Bulletin/Repair Instructions
EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
Mfr Comm. #:
NTB15-049o
Date Added:
March 26, 2018
Manufacturer:
NISSAN
Summary
TELEMATICS SERVICE INFORMATION This bulletin applies only to vehicles equipped with a Telematics Communication Unit (TCU). This bulletin has been amended. Changes have been made throughout. It is necessary to read the revised procedure(s) in entirety to properly perform the action(s). Please discard previous versions of this bulletin.
Associated Products (23)
2018 Nissan Altima 2018 Nissan Armada 2018 Nissan GT-R 2018 Nissan Leaf 2018 Nissan Maxima 2018 Nissan Murano 2018 Nissan Pathfinder 2018 Nissan Rogue 2018 Nissan Sentra 2018 Nissan Titan 2017 Nissan Altima 2017 Nissan GT-R 2017 Nissan Maxima 2017 Nissan Murano 2017 Nissan Pathfinder 2017 Nissan Rogue 2017 Nissan Sentra 2017 Nissan Titan 2016 Nissan Altima 2016 Nissan Maxima+ 3 more
Associated Documents
- Download MC-10130490-0001.pdf↗
February 1, 2018•Document ID: 10130496
Service Bulletin/Repair Instructions
EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
Mfr Comm. #:
NTB18-008
Date Added:
March 26, 2018
Manufacturer:
NISSAN
Summary
ADAS SYSTEM DTC C1A03, C1A04, AND/OR C1B01 SERVICE INFORMATION This bulletin applies only to vehicles equipped with Automatic Emergency Braking (AEB) or Forward Emergency Braking (FEB). SERVICE INFORMATION If the following ICC/ADAS codes are stored, make sure to follow the diagnostic procedures in the Electronic Service Manual (ESM) before replacing any parts. C1A03 ? VEHICLE SPEED SENSOR -The diagnostic procedure in the ESM includes check and, if needed, repair for ABS DTCs before replacing ADAS components. -If repairs are performed for the ABS system; when compete, perform DTC Confirmation Procedure again before doing any additional repairs. C1A04 ? ABS/TCS/VDC SYSTEM -The diagnostic procedure in the ESM includes check and, if needed, repair for ABS DTCs before replacing ADAS components. -If repairs are performed for the ABS system; when compete, perform DTC Confirmation Procedure again before doing any additional repairs. C1B01 CAM AIMING INCMP -The diagnostic procedure in the ESM includes check and, if needed, repair for LANE CAMERA DTCs before replacing ADAS components. -LANE CAMERA DTC may require adjustment of the lane camera. -If repairs/adjustments are performed for the Lane Camera; when compete, perform DTC Confirmation Procedure again before doing any additional repairs.
Associated Products (14)
2018 Nissan Altima 2018 Nissan Armada 2018 Nissan Maxima 2018 Nissan Murano 2018 Nissan Pathfinder 2018 Nissan Rogue 2018 Nissan Sentra 2017 Nissan Altima 2017 Nissan Armada 2017 Nissan Maxima 2017 Nissan Murano 2017 Nissan Pathfinder 2017 Nissan Rogue 2017 Nissan Sentra
Associated Documents
- Download MC-10130496-0001.pdf↗
January 11, 2018•Document ID: 10128639
Service Bulletin/Repair Instructions
ENGINE; VEHICLE SPEED CONTROL
Mfr Comm. #:
NTB13-054b
Date Added:
February 12, 2018
Manufacturer:
NISSAN
Summary
ALTIMA AND ROGUE; ENGINE TURNS OFF OR HESITATES WHEN ACCELERATING FROM A STOP DURING HOT AMBIENT TEMPERATURES (+100°F) This bulletin has been amended. The APPLIED VEHICLES section and Table A on pages 5 and 6 have been revised. No other changes have been made. Please discard previous versions of this bulletin.
Associated Products (9)
2017 Nissan Altima 2017 Nissan Rogue 2016 Nissan Altima 2016 Nissan Rogue 2015 Nissan Altima 2015 Nissan Rogue 2014 Nissan Altima 2014 Nissan Rogue 2013 Nissan Altima
Associated Documents
- Download MC-10128639-0001.pdf↗
January 4, 2018•Document ID: 10128640
Service Bulletin/Repair Instructions
EQUIPMENT
Mfr Comm. #:
NTB15-049n
Date Added:
February 12, 2018
Manufacturer:
NISSAN
Summary
TELEMATICS SERVICE INFORMATION This bulletin applies to vehicles equipped with a TCU (Telematics Communication Unit). This bulletin has been amended. A correction was made to the Service Procedure on page 23. No other changes were made. Please discard previous versions of this bulletin.
Associated Products (22)
2018 Nissan Altima 2018 Nissan Armada 2018 Nissan GT-R 2018 Nissan Maxima 2018 Nissan Murano 2018 Nissan Pathfinder 2018 Nissan Rogue 2018 Nissan Sentra 2018 Nissan Titan 2017 Nissan Altima 2017 Nissan GT-R 2017 Nissan Maxima 2017 Nissan Murano 2017 Nissan Pathfinder 2017 Nissan Rogue 2017 Nissan Sentra 2017 Nissan Titan 2016 Nissan Altima 2016 Nissan Maxima 2016 Nissan Rogue+ 2 more
Associated Documents
- Download MC-10128640-0001.pdf↗
December 19, 2017•Document ID: 10127449
Service Bulletin/Repair Instructions
ENGINE
Mfr Comm. #:
NTB16-110g
Date Added:
January 29, 2018
Manufacturer:
NISSAN
Summary
2013-2017 ALTIMA AND 2014-2016 ROGUE; 4 CYLINDER WITH DTC P0776 AND/OR JUDDER WITH P17F0 OR P17F1 STORED This bulletin applies to Altima vehicles equipped with a 4-cyl engine only. This bulletin has been amended to add 2013-2014 Altima to the Applied Vehicles and Table A on page 80, and to supersede NTB15-084 and NTB15-086. The Service Procedure was updated on page 81. No other changes have been made. Please discard previous versions of this bulletin.
Associated Products (8)
2017 Nissan Altima 2016 Nissan Altima 2016 Nissan Rogue 2015 Nissan Altima 2015 Nissan Rogue 2014 Nissan Altima 2014 Nissan Rogue 2013 Nissan Altima
Associated Documents
- Download MC-10127449-0001.pdf↗
December 19, 2017•Document ID: 10127447
Service Bulletin/Repair Instructions
ENGINE
Mfr Comm. #:
NTB15-086i
Date Added:
January 29, 2018
Manufacturer:
NISSAN
Summary
2013-2014 ALTIMA; MIL ON WITH DTC P0776, P1715 MAY HAVE HESITATION AND/OR LACK OF POWER This bulletin applies to vehicles equipped with a 4-cyl engine only. This bulletin has been superseded to NTB16-110. Please discard previous versions of this bulletin.
Associated Products (2)
2014 Nissan Altima 2013 Nissan Altima
Associated Documents
- Download MC-10127447-0001.pdf↗
December 19, 2017•Document ID: 10127446
Service Bulletin/Repair Instructions
ENGINE
Mfr Comm. #:
NTB15-084f
Date Added:
January 29, 2018
Manufacturer:
NISSAN
Summary
2013-2014 ALTIMA; CVT JUDDER AND DTC P17F0 OR P17F1 STORED This bulletin applies to vehicles equipped with a 4-cyl engine only. This bulletin has been superseded to NTB16-110. Please discard previous versions of this bulletin.
Associated Products (2)
2014 Nissan Altima 2013 Nissan Altima
Associated Documents
- Download MC-10127446-0001.pdf↗
December 18, 2017•Document ID: 10127456
Service Bulletin/Repair Instructions
EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
Mfr Comm. #:
NTB17-127
Date Added:
January 29, 2018
Manufacturer:
NISSAN
Summary
NISSAN; INTELLIGENT KEY INITIALIZATION PROCEDURE STOPS OR WILL NOT CONTINUE SERVICE INFORMATION When the initialization procedure being performed with a new or existing Intelligent Key to an applied vehicle is interrupted (the procedure stops or will not continue), the BCM may be left in learn mode and will not function until it returns to normal mode. Under this condition, the BCM and Intelligent Key(s) will not function normally. If this condition occurs, the BCM must be returned to normal mode and the initialization procedure started over. To get back to the beginning of the Initialization procedure, use one of the following procedures: - Successfully perform the initialization procedure using one of the original Intelligent Keys twice consecutively. - Each successful initialization will follow with two (2) quick tones. OR - When the initialization procedure cannot be successfully performed twice (more than two quick tones), perform the initialization procedure five (5) times using the inoperative ?failed? Intelligent Key. - Initialization does not need to be successful when performed five times. When returning to normal operating mode, the initialization procedure for all Intelligent Keys may be started again.
Associated Products (5)
2017 Nissan Altima 2017 Nissan Maxima 2017 Nissan Murano 2017 Nissan Pathfinder 2017 Nissan Titan
Associated Documents
- Download MC-10127456-0001.pdf↗
December 11, 2017•Document ID: 10127453
Service Bulletin/Repair Instructions
ENGINE
Mfr Comm. #:
NTB17-123
Date Added:
January 29, 2018
Manufacturer:
NISSAN
Summary
2018 ALTIMA AND SENTRA; DO NOT ERASE DTC P0315 This bulletin applies to vehicles equipped with a 4-cyl (non-turbo) engine only. SERVICE INFORMATION If DTC P0315 is stored on an Applied Vehicle, do not erase it. If DTC P0315 is stored, the description on the CONSULT-III plus screen will be listed as: (TBD) Crankshaft Position System Variation Not Learned. If you find DTC P0315 stored, please note the following: - Do not erase the DTC. - It will not turn ON the MIL. - No diagnosis or repair is necessary. - It will clear itself after a few trips with normal operation of the vehicle. NOTE: If DTC P0315 is erased with C-III plus, the ECM will restart the learning pattern: - The DTC may be stored again before the learning/driving pattern is complete. - The MIL will not come ON. - The DTC will clear itself after a few trips with normal operation of the vehicle.
Associated Products (2)
2018 Nissan Altima 2018 Nissan Sentra
Associated Documents
- Download MC-10127453-0001.pdf↗
December 7, 2017•Document ID: 10127450
Service Bulletin/Repair Instructions
EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
Mfr Comm. #:
NTB16-117b
Date Added:
January 29, 2018
Manufacturer:
NISSAN
Summary
2016-2017 ALTIMA; MIL ON WITH A/F RATIO SENSOR DTC(s) This bulletin has been amended. Changes have been made throughout. It is necessary for you to read this revised procedure to properly perform this action. Please discard all previous versions of this bulletin.
Associated Products (2)
2017 Nissan Altima 2016 Nissan Altima
Associated Documents
- Download MC-10127450-0001.pdf↗
November 27, 2017•Document ID: 10127474
Service Bulletin/Repair Instructions
EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
Mfr Comm. #:
NTB17-118
Date Added:
January 29, 2018
Manufacturer:
NISSAN
Summary
NISSAN; INTELLIGENT KEY IDENTIFICATION AND REGISTRATION TIPS This bulletin applies to vehicles equipped with Intelligent Key only. SERVICE INFORMATION When replacing or adding an Intelligent Key, it is very important to make sure the correct Intelligent Key is selected from the parts department. - A running change was made that will help identify the correct Intelligent Key. - Beginning in late 2017 and early 2018 the last five digits of the Intelligent Key part number is marked on the Intelligent Key under the mechanical key. - See page 2 for location images of this part number addition. NOTE: - A correct Intelligent Key may or may not have the last five digits of the part number as shown on page 2. - The above running change was applied as a ?help? to identify the correct Intelligent Key for a given vehicle, but the actual part number listed in the parts catalog did not change. - Make sure to use the electronic parts catalog (FAST) or equivalent to confirm the correct Intelligent Key for a given vehicle.
Associated Products (12)
2018 Nissan Altima 2018 Nissan Maxima 2018 Nissan Murano 2018 Nissan Pathfinder 2018 Nissan Rogue 2018 Nissan Titan 2017 Nissan Altima 2017 Nissan Maxima 2017 Nissan Murano 2017 Nissan Pathfinder 2017 Nissan Rogue 2017 Nissan Titan
Associated Documents
- Download MC-10127474-0001.pdf↗
November 21, 2017•Document ID: 10125187
Service Bulletin/Repair Instructions
SUSPENSION
Mfr Comm. #:
NTB17-040a
Date Added:
December 14, 2017
Manufacturer:
NISSAN
Summary
REVISED WHEEL ALIGNMENT SPECIFICATIONS This bulletin has been amended to add 2018 Versa Sedan and 2018 Versa Note. No other changes have been made. Please discard previous versions of this bulletin.
Associated Products (22)
2018 Nissan Versa 2017 Nissan Altima 2017 Nissan Frontier 2017 Nissan Leaf 2017 Nissan Maxima 2017 Nissan Murano 2017 Nissan NV 2017 Nissan Pathfinder 2017 Nissan Rogue 2017 Nissan Versa 2017 Nissan Versa Note 2016 Nissan Altima 2016 Nissan Frontier 2016 Nissan Leaf 2016 Nissan Maxima 2016 Nissan Murano 2016 Nissan NV 2016 Nissan NV200 2016 Nissan Pathfinder 2016 Nissan Rogue+ 2 more
Associated Documents
- Download MC-10125187-0001.pdf↗
November 14, 2017•Document ID: 10126254
Service Bulletin/Repair Instructions
EQUIPMENT:ELECTRICAL
Mfr Comm. #:
NTB15-049m
Date Added:
December 22, 2017
Manufacturer:
NISSAN
Summary
TELEMATICS SERVICE INFORMATION This bulletin applies to vehicles that are equipped with a wireless communication device called a Telematics Communication Unit (TCU). This bulletin has been amended. Changes have been made throughout. You must read the entire bulletin to understand all the changed information. Please discard previous versions of this bulletin.
Associated Products (22)
2018 Nissan Altima 2018 Nissan Armada 2018 Nissan GT-R 2018 Nissan Maxima 2018 Nissan Murano 2018 Nissan Pathfinder 2018 Nissan Rogue 2018 Nissan Sentra 2018 Nissan Titan 2017 Nissan Altima 2017 Nissan GT-R 2017 Nissan Maxima 2017 Nissan Murano 2017 Nissan Pathfinder 2017 Nissan Rogue 2017 Nissan Sentra 2017 Nissan Titan 2016 Nissan Altima 2016 Nissan Maxima 2016 Nissan Rogue+ 2 more
Associated Documents
- Download MC-10126254-0001.pdf↗
November 2, 2017•Document ID: 10126439
Service Bulletin/Repair Instructions
ENGINE AND ENGINE COOLING
Mfr Comm. #:
NTB16-110f
Date Added:
December 22, 2017
Manufacturer:
NISSAN
Summary
2015-2017 ALTIMA AND 2014-2016 ROGUE; 4 CYLINDER WITH DTC P0776 AND/OR JUDDER WITH P17F0 OR P17F1 STORED This bulletin applies to Altima vehicles with a 4 cylinder engine only. This bulletin has been amended. Changes were made on pages 2, 3, 85-89 and 96. Please discard previous versions of this bulletin. You must read the entire bulletin to properly perform this repair; includes TCM reprograming.
Associated Products (6)
2017 Nissan Altima 2016 Nissan Altima 2016 Nissan Rogue 2015 Nissan Altima 2015 Nissan Rogue 2014 Nissan Rogue
Associated Documents
- Download MC-10126439-0001.pdf↗

← Back to Nissan Altima