Freightliner · Model Report
Showing safety data for the 2018 model year only.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2023 Freightliner Cascadia, 2020-2023 Western Star 49X, 2021-2023 Western Star 47X, and 2022 Freightliner 114SD vehicles. The brake modulator valves on the front axle may corrode and cause the vehicle to pull to the affected side during braking initiated by Electronic Stability Control (ESC) or Roll Stability Control (RSC).
Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2023 Freightliner Cascadia, 2020-2022 Freightliner Business Class M2, and 2022 Freightliner 114SD, and 2020-2023 Western Star 49X, 2021-2023 Western Star 47X, and 2021-2022 Western Star 57X vehicles. The brake modulator valves on the front axle may corrode and cause the vehicle to pull to the affected side during an Adaptive Cruise Control (ACC) braking event.
Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2021 Cascadia P4 vehicles. The brake lights may remain illuminated after the brake pedal has been released.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2022 Freightliner Cascadia vehicles equipped with halogen headlight assemblies. The halogen headlight bulb may dislodge during replacement and contact other vehicle components, possibly causing them to melt.
Daimler Trucks North America LLC (DTNA) is recalling certain 2018-2019 Freightliner Cascadia, Business Class M2, 108SD, 114SD and 122SD and Western Star 4700, 4900 and 5700 vehicles. An internal component within the clutch assembly may fail, which in certain circumstances could allow the vehicle to move unexpectedly.
See attached document for complaint.
No injuries · No fire · No crash
See attached document for complaint.
The Automatic Emergency Braking System has activated at least 3 different times while I was driving. At each occurrence there was nothing in the roadway or travel lane. The vehicle came to an abrupt stop twice and slammed the brakes on but then released them a moment later once. In each event a very near collision with other vehicles was almost caused. There are other drivers that use this truck that have reported similar events (5 or 6), but I cannot say for certain what the exact circumstances were in those events. This vehicle is available for inspection if requested. A dealer has not confirmed the problem, each time they report that the system in functioning correctly. The vehicle has not been inspected by any entity other than the dealer. No symptoms prior, only a red collision warning light in the gauge cluster and a warning beep at the immediate time of the event.
No injuries · No fire · No crash
Unsure what system or component failed. Our driver was making a delivery on the morning of 4/29/23. He was parked at the consignee location, engine off, and reported hearing a loud pop sound from the tractor while he was offloading merchandise from the trailer. A fire started under the hood, he attempted to extinguish it with the fire extinguisher and failed. The tractor burned to the ground. If the driver had been in the cab when it started, he could've been killed in the fire. Per online articles I found, it seems there were recalls on this same tractor year/model where fires were involved, but this unit shows no open recalls. Wreckage is available for inspection. CHP came to the seen, but to my knowledge there has been no inspection performed by anyone in any official capacity yet. No warning lamps or messages, or symptoms reported in advance of incident, just the loud pop sound reported by the driver.
The contact owns a 2018 Freightliner Cascadia. The contact stated that while the vehicle was turned off, the brake lights remained illuminated. The vehicle was not diagnosed nor repaired by an independent mechanic or dealer. The manufacturer was not made aware of the failure. The failure mileage was unknown.
No injuries · No fire · No crash