Ford C-Max Service Bulletins
240 manufacturer communications on file.
- December 14, 2018•Document ID: 10153947Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- SSM 47710
- Date Added:
- March 4, 2019
- Manufacturer:
- FORD
SummarySome 2014-2015 Escape, 2015 C-Max and Focus vehicles equipped with integrated remote start may exhibit an illuminated MIL with diagnostic trouble code (DTC) P0116 in the powertrain control module (PCM) immediately following a remote start event. Vehicles may also display a warning message stating Engine Coolant Over Temperature. This condition may occur when remote start is used and the vehicle is allowed to time out (engine shuts off). Reprogram the body control module (BCM) using the latest software version of the appropriate Ford diagnostic scan tool. For claiming, use causal part 12A648 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Associated Products (4)Associated Documents - December 12, 2018•Document ID: 10153935Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- TSB 18-2373
- Date Added:
- March 4, 2019
- Manufacturer:
- FORD
SummarySome 2012-2018 Focus Electric, 2013-2017 C-Max Energi, and 2013-2019 Fusion Energi plug-in hybrid electric vehicles (PHEV) may exhibit the high voltage (HV) battery failing to charge while connected to the second Generation 120-volt electric vehicle service equipment (EVSE) charge cord. Follow the Service Procedure steps to correct the condition.
Associated Products (19)Associated Documents - December 10, 2018•Document ID: 10153944Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 47703
- Date Added:
- March 4, 2019
- Manufacturer:
- FORD
SummarySome 2014-2019 Escape, 2014-2018 C-MAX,Focus, and Transit Connect vehicles may exhibit a concern of not able to program and/or no electrical power after installation of a service part Body Control Module(BCM). Inspect the BCM for the presence of fuse F88. If the fuse is missing, install the correct size replacement fuse as outlined in the Wiring Manual and then re-evaluate the concern.
Associated Products (21)2019 Ford Escape2018 Ford C-Max2018 Ford Escape2018 Ford Focus2018 Ford Transit Connect2017 Ford C-Max2017 Ford Escape2017 Ford Focus2017 Ford Transit Connect2016 Ford C-Max2016 Ford Escape2016 Ford Focus2016 Ford Transit Connect2015 Ford C-Max2015 Ford Escape2015 Ford Focus2015 Ford Transit Connect2014 Ford C-Max2014 Ford Escape2014 Ford Focus+ 1 moreAssociated Documents - December 4, 2018•Document ID: 10153931Service Bulletin/Repair InstructionsSEATS; EQUIPMENT
- Mfr Comm. #:
- TSB 18-2361
- Date Added:
- March 4, 2019
- Manufacturer:
- LINCOLN
SummarySome 2013-2018 C-Max, 2013-2019 Escape/Fusion/MKZ, 2015-2018 Focus, 2015-2019 Edge/F150/MKC/Mustang, 2016-2018 MKX, 2016-2019 Explorer, 2017 Super Duty, 2018-2019 EcoSport/Expedition, and 2019 Nautilus vehicles may experience seat pan looseness, lateral movement, or clunk/thump noise on turns. Follow the Service Procedure steps to correct the condition.
Associated Products (80)2019 Ford Ecosport2019 Ford Edge2019 Ford Escape2019 Ford Explorer2019 Ford F-1502019 Ford F-2502019 Ford F-3502019 Ford Fusion2019 Ford Mustang2019 Lincoln MKC2019 Lincoln MKX2019 Lincoln MKZ2019 Lincoln Nautilus2018 Ford C-Max2018 Ford Ecosport2018 Ford Edge2018 Ford Escape2018 Ford Explorer2018 Ford F-1502018 Ford F-250+ 60 moreAssociated Documents - November 6, 2018•Document ID: 10152468Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 47649
- Date Added:
- January 7, 2019
- Manufacturer:
- FORD
Summary2013 2018 C-Max, Fusion, and MKZ Hybrid vehicles using SOBDM-C module connectors do not require electrical/dielectric grease. If used it may induce module communication concerns. Codes present may be U0293 and a P0AA6. The Workshop Shop Manual (WSM) does not state to use it on these module connectors.
Associated Products (18)Associated Documents - October 31, 2018•Document ID: 10148717Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- TSB 18-2328
- Date Added:
- November 19, 2018
- Manufacturer:
- FORD
SummarySome 2013-2016 Fusion, MKZ and C-Max vehicles equipped with an HF35 transmission and built on or before 15-Aug-2015 may exhibit a thumping/rubbing or grinding noise coming from the transmission. The noise may be present in all gear ranges including neutral when the vehicle is moving but will not be present when the vehicle is stationary or in park. Follow the Service Procedure steps to correct the condition.
Associated Products (12)Associated Documents - September 21, 2018•Document ID: 10149770Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 47538
- Date Added:
- December 3, 2018
- Manufacturer:
- FORD
SummarySome 2016-2018 Ford and Lincoln vehicles equipped with SYNC 3 may exhibit the Android Auto Preference menu selection is not present after an update to version 3.0 software. In prior versions of SYNC 3 software this menu was present, however in version 3.0 software the Android Auto Preference menu will only show up once an Android Phone has been initially connected to SYNC. This an operating characteristic of the Android Auto application after the SYNC 3.0 update and no repairs should be attempted.
Associated Products (61)2018 Ford C-Max2018 Ford Edge2018 Ford Escape2018 Ford Explorer2018 Ford F-1502018 Ford F-2502018 Ford F-3502018 Ford Fiesta2018 Ford Flex2018 Ford Focus2018 Ford Mustang2018 Ford Taurus2018 Ford Transit2018 Ford Transit Connect2018 Lincoln Continental2018 Lincoln MKC2018 Lincoln MKT2018 Lincoln MKX2018 Lincoln MKZ2017 Ford C-Max+ 41 moreAssociated Documents - September 18, 2018•Document ID: 10149751Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- TSB 18-2282
- Date Added:
- December 3, 2018
- Manufacturer:
- FORD
SummarySome 2013-2017 Fusion Energi and C-Max Energi vehicles may exhibit an illuminated MIL with DTC P0C27 and/or P0C28. Follow the Service Procedure steps to correct the condition.
Associated Products (10)Associated Documents - August 31, 2018•Document ID: 10144951Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- SSM 47502
- Date Added:
- September 24, 2018
- Manufacturer:
- FORD
SummarySome 2017-2018 Fusion, MKZ and C-Max vehicles with 2.0L Gas/Electric engine may exhibit an illuminated MIL with DTC P013A in the Powertrain Control Module(PCM). This may be due to an exhaust system leak. Exhaust leak inspection should be conducted before performing Powertrain Control/Emissions Diagnostics PC/ED Manual diagnostic routines. Inspect for carbon soot/moisture witness marks at exhaust connections. Inspect welds including CMS Boss, flex pipe and flanges. Inspect Catalyst Monitor Sensor(CMS) threads and crush washer to confirm sensor is fully seated in pipe boss. Do not use Vacutec smoke machine to diagnose sensor leaks. Applying soapy water solution to exhaust connections including CMS threads, while exhaust flow is restricted at the tailpipe and exhaust system is pressurized at 5 PSI(do not exceed 5 PSI), will increase ability to identify and confirm leaks
Associated Products (6)Associated Documents - August 2, 2018•Document ID: 10144930Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 47444
- Date Added:
- September 24, 2018
- Manufacturer:
- FORD
SummarySome 2016-2018 Ford and Lincoln vehicles equipped with SYNC 3 not at the latest software level may exhibit Various Performance Related concerns such as Display Operation, Navigation, Voice Recognition, Phone Pairing, Applink, Travel Link, Slow System Response, etc. Check for SYNC software update under the OASIS Tab SYNC selection. If an update is available refer to WSM, Section 415-00 and update the APIM software. After Installation, complete pop-up appears, remove USB flash drive and install into IDS tool to update Ford database. Perform a complete ignition cycle by turning the key off for 5 minutes which is critical for a successful installation. If no updates are available or a blue or black screen is present after an update refer to WSM, Section 415-00 for diagnosis or SYNC 3 intermittent blank screen GSB for tips. For claiming, use causal part 14G371 and applicable labor operations in section 10 of the SLTS manual.
Associated Products (59)2018 Ford C-Max2018 Ford Ecosport2018 Ford Edge2018 Ford Escape2018 Ford Explorer2018 Ford F-1502018 Ford Fiesta2018 Ford Flex2018 Ford Focus2018 Ford Fusion2018 Ford Mustang2018 Ford Taurus2018 Ford Transit2018 Ford Transit Connect2018 Lincoln Continental2018 Lincoln MKC2018 Lincoln MKT2018 Lincoln MKX2018 Lincoln MKZ2017 Ford C-Max+ 39 moreAssociated Documents - July 20, 2018•Document ID: 10144217Service Bulletin/Repair InstructionsEQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 47428
- Date Added:
- September 10, 2018
- Manufacturer:
- FORD
SummarySome 2013-2018 Fusion Energi, 2012-2018 Focus Electric and 2013-2017 C-MAX Energi vehicles equipped with a TCU built on or before 11-Oct-2017 may exhibit a discharged battery, inoperative remote features via MyFord Mobile app, incomplete user authorization and/or accessory protocol interface module (APIM) DTC U0198 with no modem electronic serial number (ESN) displayed. To correct this condition, perform any open TCU field service actions (FSAs). If U0198 DTC still remains, remove the TCU fuse for 5 minutes then reinstall. Reprogram the TCU using IDS or Ford J2534 Diagnostic Software (FJDS) release 110.03 or higher. An internet connection is required. Calibration files may also be obtained at www.motorcraftservice.com. For claiming, use causal part 14G229 and applicable labor operations in section 10 of the SLTS manual
Associated Products (16)Associated Documents - July 20, 2018•Document ID: 10144214Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- SSM 47425
- Date Added:
- September 10, 2018
- Manufacturer:
- FORD
SummarySome 2016 C-MAX and Focus Electric vehicles built on or after 11-May-2016 may exhibit a false activation of the alarm system. Reprogram the body control module (BCM) to the latest level using Integrated Diagnostic System (IDS) release 110.03 or higher. To correct the concern Make sure you are connected to the internet when entering module programming to obtain the latest updates. Use the applicable labor operation in section 10 of the Service Labor Time Standards manual and causal part 14A068 when claiming repair. Calibration files may also be obtained at www.motorcraftservice.com
Associated Products (2)Associated Documents - July 20, 2018•Document ID: 10144195Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:12V/24V/48V BATTERY; EQUIPMENT
- Mfr Comm. #:
- tsb18-2216
- Date Added:
- September 10, 2018
- Manufacturer:
- FORD
SummarySome 2012-2018 Focus Electric, 2013-2017 C-Max Energi, and 2013-2018 Fusion Energi plug-in hybrid electric vehicles (PHEV) may exhibit the high voltage (HV) battery failing to charge while connected to the second Generation 120-volt electric vehicle service equipment (EVSE) charge cord. Follow the Service Procedure steps to correct the condition.
Associated Products (16)Associated Documents - June 22, 2018•Document ID: 10143103Service Bulletin/Repair InstructionsEQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 47380
- Date Added:
- July 23, 2018
- Manufacturer:
- LINCOLN
SummarySome 2016-2018 Ford and Lincoln vehicles with SYNC 3 may exhibit an intermittent blue or black screen. Check for SYNC software update under the OASIS Tab SYNC selection. If update is available refer to WSM, Section 415-00 and update APIM software. After Installation Complete pop-up appears, remove USB flash drive and install into IDS tool to update Ford database. Perform a complete ignition cycle by turning the key off for 5 minutes which is critical for a successful installation. If no updates are available or a blue or black screen is present after an update refer to WSM, Section 415-00 for diagnosis or SYNC 3 intermittent blank screen GSB for tips. For claiming, use causal part 14G371 and applicable labor operations in section 10 of the SLTS manual.
Associated Products (55)2018 Ford C-Max2018 Ford Ecosport2018 Ford Edge2018 Ford Escape2018 Ford Explorer2018 Ford F-1502018 Ford Fiesta2018 Ford Flex2018 Ford Focus2018 Ford Fusion2018 Ford Mustang2018 Ford Taurus2018 Ford Transit2018 Lincoln Continental2018 Lincoln MKC2018 Lincoln MKT2018 Lincoln MKX2018 Lincoln MKZ2017 Ford C-Max2017 Ford Edge+ 35 moreAssociated Documents - June 22, 2018•Document ID: 10143102Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 47379
- Date Added:
- July 23, 2018
- Manufacturer:
- FORD
SummaryVarious 2016-2018 vehicles with SYNC 3 may experience a touch screen that does not respond to any input. Using the Professional Technician Society (PTS) website > OASIS tab > SYNC version, verify the vehicle SYNC software version. If the vehicle is at version 2.2 please update the module to the latest software level. After the software is updated make sure you shut the vehicle off, open the door for 2 minutes, then turn the key back on before testing the touch screen. If the software is at a later version than 2.2, proceed with normal diagnostics in Workshop Manual (WSM), Section 415-00. For claiming, use causal part 14G371 and applicable labor operations in section 10 of the Service Labor Times Standards (SLTS) manual.
Associated Products (58)2018 Ford C-Max2018 Ford Ecosport2018 Ford Edge2018 Ford Escape2018 Ford Explorer2018 Ford F-1502018 Ford Fiesta2018 Ford Flex2018 Ford Focus2018 Ford Fusion2018 Ford Mustang2018 Ford Taurus2018 Ford Transit2018 Lincoln Continental2018 Lincoln MKC2018 Lincoln MKT2018 Lincoln MKX2018 Lincoln MKZ2017 Ford C-Max2017 Ford Edge+ 38 moreAssociated Documents - June 13, 2018•Document ID: 10143113Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL
- Mfr Comm. #:
- 18M02
- Date Added:
- July 23, 2018
- Manufacturer:
- LINCOLN
SummaryCertain 2017 Model Year Multiple Vehicle Lines - California Emission Warranty Parts Coverage
Associated Products (17)Associated Documents - June 11, 2018•Document ID: 10143089Service Bulletin/Repair InstructionsEQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- SSM 47347
- Date Added:
- July 23, 2018
- Manufacturer:
- FORD
SummarySome 2013-2017 C-Max PHEV may exhibit diagnostic code P2183 and may have the coolant hoses that attach to the lower bulkhead connections incorrectly installed. The two hoses share the same female connectors and mate to matching male tube ends. There are two primary methods for telling which hose is which. The hoses have a marking on the upper surface (when installed) for either inboard (IB) or outboard (OB) orientation. The other method is to observe the braided protective sleeves that are installed on the hoses. The longer, nylon sleeve is on the inboard hose and should be attached to the tube that is closest to the driver's side. The shorter, fabric sleeve in on the outboard hose and should be installed to the tube that is closer to the passenger's side.
Associated Products (5)Associated Documents - April 4, 2018•Document ID: 10137126Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- SSM 47211
- Date Added:
- May 21, 2018
- Manufacturer:
- FORD
SummarySome 2016-2017 Ford and Lincoln vehicles equipped with SYNC 3 version 2.2 software may exhibit a blank screen after attempting to exit Valet mode. SYNC software updates are now available under the OASIS Tab SYNC selection. If update is available, refer to WSM Section 415-00 and update APIM software. For claiming, use causal part 14G371 and applicable labor operations in section 10 of the SLTS manual.
Associated Products (36)2017 Ford C-Max2017 Ford Edge2017 Ford Escape2017 Ford Expedition2017 Ford Explorer2017 Ford F-1502017 Ford Fiesta2017 Ford Focus2017 Ford Mustang2017 Ford Taurus2017 Ford Transit2017 Ford Transit Connect2017 Lincoln Continental2017 Lincoln MKC2017 Lincoln MKT2017 Lincoln MKX2017 Lincoln MKZ2017 Lincoln Navigator2016 Ford C-Max2016 Ford Edge+ 16 moreAssociated Documents - March 30, 2018•Document ID: 10137113Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- SSM 47201
- Date Added:
- May 21, 2018
- Manufacturer:
- FORD
SummaryReplacing the original equipment SYNC/Navigation system with either an aftermarket SYNC/Navigation kit or modifying original SYNC/Navigation parts to provide additional features is not recommended nor supported on any Ford, Mercury or Lincoln vehicle. Only approved Genuine Ford accessories or originally installed systems are supported and certified to function correctly with other vehicle systems. If you suspect a system has been modified, the following resources can be used to verify original equipment: Monroney Label (Window Sticker), Professional Technician Society (PTS) OASIS tab select SYNC or HVBOM. For Genuine Ford accessories use: PTS Workshop Tab select Dealer Installed Accessory or Accessory Installation.
Associated Products (234)2018 Ford C-Max2018 Ford Ecosport2018 Ford Edge2018 Ford Escape2018 Ford Explorer2018 Ford F-1502018 Ford Fiesta2018 Ford Flex2018 Ford Fusion2018 Ford Mustang2018 Ford Taurus2018 Ford Transit2018 Lincoln Continental2018 Lincoln MKC2018 Lincoln MKT2018 Lincoln MKX2018 Lincoln MKZ2017 Ford C-Max2017 Ford Edge2017 Ford Escape+ 214 moreAssociated Documents - March 29, 2018•Document ID: 10137110Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 47198
- Date Added:
- May 21, 2018
- Manufacturer:
- FORD
SummarySome 2013-2017 Fusion Energi, 2012-2017 Focus Electric and 2013-2017 C-MAX Energi vehicles equipped with a TCU built on or before 11-Oct-2017 may exhibit a discharged battery, inoperative remote features via MyFord Mobile app, incomplete user authorization and/or accessory protocol interface module (APIM) DTC U0198 with no modem electronic serial number (ESN) displayed. To correct this condition, perform any open TCU field service actions (FSAs). If U0198 DTC still remains, remove the TCU fuse for 5 minutes then reinstall. Reprogram the TCU using IDS or Ford J2534 Diagnostic Software (FJDS) release 108.05 or higher. An internet connection is required. Calibration files may also be obtained at www.motorcraftservice.com. For claiming, use causal part 14G229 and applicable labor operations in section 10 of the SLTS manual
Associated Products (16)Associated Documents