BMW Z4 Service Bulletins
513 manufacturer communications on file.
- February 1, 2020•Document ID: 10172502Service Bulletin/Repair InstructionsBACK OVER PREVENTION; ELECTRICAL SYSTEM
- Mfr Comm. #:
- B663119
- Date Added:
- March 16, 2020
- Manufacturer:
- BMW
SummaryREARVIEW CAMERA. SPORADICALLY NO IMAGE IS DISPLAYED: This Service Information Bulletin (Revision 1) replaces SI B66 31 19 dated October 2019. When reverse gear is selected or the rear view camera is activated sporadically no image is displayed on the Central Information Display (CID). If the ignition is cycled off and back on the function is restored. Software error between the head unit and the rear-view camera.
Associated Products (37)Associated Documents - February 1, 2020•Document ID: 10172495Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- B610120
- Date Added:
- March 16, 2020
- Manufacturer:
- BMW
SummaryACCESSORIES DO NOT POWER ON: Customer is not able to power accessories using the 12 volt power socket. Design change to reduce short circuits and blown fuses.
Associated Products (10)Associated Documents - February 1, 2020•Document ID: 10172494Service Bulletin/Repair InstructionsVISIBILITY
- Mfr Comm. #:
- B511318
- Date Added:
- March 16, 2020
- Manufacturer:
- BMW
SummaryLIN BUS FAULTS WITH EXTERIOR REARVIEW MIRROR GLASS DAMAGE: This Service Information Bulletin (Revision 2) replaces SI B51 13 18 dated February 2020. The exterior rearview mirror glass is discolored or cracked. The power windows and folding mirrors may not operate.
Associated Products (8)Associated Documents - February 1, 2020•Document ID: 10172487Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- B110120
- Date Added:
- March 16, 2020
- Manufacturer:
- BMW
SummaryENGINE OIL FILTER INSERT IS DIFFICULT TO REMOVE - REMOVAL: This Service Information Bulletin (Revision 1) replaces SI B11 01 20 dated February 2020. On rare occasions during an engine oil service the BMW Original (Genuine) engine oil filter insert is either difficult to remove or breaks apart in the oil filter housing. The engine oil filter is broken. The paper is torn and the lower plastic section is stuck in the engine oil filter housing (1).
Associated Products (131)Associated Documents - January 1, 2020•Document ID: 10171503Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- B840220
- Date Added:
- February 18, 2020
- Manufacturer:
- BMW
SummaryREMOTE 3D VIEW NOT AVAILABLE: Remote 3D View cannot be launched In the BMW ConnectedDrive App. Software error in the Advanced Telematics Module 2 (ATM2).
Associated Products (68)Associated Documents - January 1, 2020•Document ID: 10171502Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- B840120
- Date Added:
- February 18, 2020
- Manufacturer:
- BMW
SummaryBMW CONNECTEDDRIVE SERVICES ARE NOT AVAILABLE: The BMW ConnectedDrive services are not available for an extended period. This may include: Calls in the BMW Assistance app (Concierge Service) Vehicle data and status in the BMW ConnectedDrive app Remote services Remote 3D View Real Time Traffic Information (RTTI) Weather News Software error in Advanced Telematics Module 2 (ATM2).
Associated Products (68)Associated Documents - January 1, 2020•Document ID: 10171497Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:PROPULSION SYSTEM:TRACTION BATTERY
- Mfr Comm. #:
- B660120
- Date Added:
- February 18, 2020
- Manufacturer:
- BMW
SummaryACTIVE PARK DISTANCE CONTROL: SETTING MENU NO LONGER AVAILABLE AFTER PROGRAMMING. The activation setting for Active Park Distance Control (aPDC) is no longer available after programming. In this case the customer can no longer activate or deactivate the function. Note: The setting (activated or de-activated) which was selected prior to programming the vehicle will be retained. Software error in the head unit HU-H3 occurring with vehicle Integration Level (I-Level) S18A-19-11-500 to S18A-19-11-540.
Associated Products (12)Associated Documents - January 1, 2020•Document ID: 10171492Service Bulletin/Repair InstructionsSEATS
- Mfr Comm. #:
- B520120
- Date Added:
- February 18, 2020
- Manufacturer:
- BMW
SummaryGROANING NOISE FROM TRIM APERTURE ON THE FRONT SEAT: When getting in or out of the vehicle a groaning noise can be heard from the opening (aperture) in the seat backrest. The noise may be heard from one or both of the front seats. The trim aperture in the front seat is insufficiently lubricated. The front and rear halves of the trim can contact each other causing friction noise.
Associated Products (7)Associated Documents - January 1, 2020•Document ID: 10171491Service Bulletin/Repair InstructionsSTRUCTURE:BODY:DOOR
- Mfr Comm. #:
- B510320
- Date Added:
- February 18, 2020
- Manufacturer:
- BMW
SummaryWATER RUNS OUT OF DRIVER'S DOOR WHEN OPENING: If the vehicle is parked on an incline (front higher than the rear) water may not be able to flow out of the door. Upon opening the door water may flow out rapidly. The collected water does not run inside the car. The door seal creates such a tight seal that water can't flow from the door.
Associated Products (2)Associated Documents - January 1, 2020•Document ID: 10171489Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- B510120
- Date Added:
- February 18, 2020
- Manufacturer:
- BMW
SummaryRATTLE NOISE FROM STEERING COLUMN TRIM: A rattle noise is present from the area of the lower steering column trim (lower shroud). One or more of the lower steering column trim latching mechanisms is broken.
Associated Products (2)Associated Documents - January 1, 2020•Document ID: 10171479Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- B111219
- Date Added:
- February 18, 2020
- Manufacturer:
- BMW
SummaryMALFUNCTION INDICATOR LAMP IS ILLUMINATED WITH A CRANKSHAFT ADAPTION FAULT: When diagnosing an illuminated malfunction indicator lamp (MIL) and/or a different issue the following faults may also be stored in the Digital Motor Electronics (DME). Fault code Control module Fault code text 213A2B DME Increment wheel adaption faulty This situation is not associated with any drivability complaints and only affects vehicles built with a Factory I-level of 19-07-500 and later. An unfavorable DME diagnostic calibration may cause the fault code to be stored. In most circumstances this will cause the MIL to be illuminated.
Associated Products (75)Associated Documents - December 1, 2019•Document ID: 10170589Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- B621019
- Date Added:
- January 21, 2020
- Manufacturer:
- BMW
SummaryINCORRECT CONDITION BASED SERVICE DATA FOR BRAKE FLUID SERVICE. "Brake fluid service due since 12/2001" is displayed in the instrument cluster although the vehicle is only a maximum of 1 year old. Software error in the KOMBI (Instrument Cluster).
Associated Products (63)Associated Documents - December 1, 2019•Document ID: 10170588Service Bulletin/Repair InstructionsELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
- Mfr Comm. #:
- B620919
- Date Added:
- January 21, 2020
- Manufacturer:
- BMW
SummaryINSTRUMENT CLUSTER REMAINS DARK AFTER STARTING THE VEHICLE: Instrument cluster remains dark after starting the vehicle. After a restart normal functionality is restored. Software error in the KOMBI (Instrument Cluster).
Associated Products (65)Associated Documents - December 1, 2019•Document ID: 10170580Service Bulletin/Repair InstructionsSEATS
- Mfr Comm. #:
- B522219
- Date Added:
- January 21, 2020
- Manufacturer:
- BMW
SummaryNOISE DURING FORWARD / BACK SEAT ADJUSTMENT OVER THE ENTIRE LENGTH OF TRAVEL: A loud screeching noise can be heard from the front driver's or passenger's seat during forward/back seat adjustment.
Associated Products (10)Associated Documents - December 1, 2019•Document ID: 10170578Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- B410719
- Date Added:
- January 21, 2020
- Manufacturer:
- BMW
SummarySERVICE ACTION: REPLACE THE HOOD OR DOOR SERVICE ACTION: REPLACE THE HOOD OR DOOR. Incorrectly manufactured front hoods or doors have been have been installed on the affected vehicles (VINs) noted below. The front hoods do not have a circumferential PVC seal The doors do not have a part of the PVC seal and the relining adhesive applied This could lead to internal corrosion. Poor sealing of the hood and doors.
Associated Products (2)Associated Documents - December 1, 2019•Document ID: 10170572Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- B120319
- Date Added:
- January 21, 2020
- Manufacturer:
- BMW
SummaryENGINE DOES NOT START BELOW FREEZING TEMPERATURES: Engine designation correction Parts availability Warranty. The engine will not start at temperatures below freezing. The starter does not turn and engage.
Associated Products (118)Associated Documents - November 1, 2019•Document ID: 10169476Service Bulletin/Repair InstructionsFORWARD COLLISION AVOIDANCE: SENSING SYSTEM: CAMERA; EQUIPMENT; EQUIPMENT:ELECTRICAL
- Mfr Comm. #:
- B662019
- Date Added:
- December 16, 2019
- Manufacturer:
- BMW
SummarySERVICE ACTION: REPLACE KAFAS (CAMERA-BASED DRIVER ASSISTANCE SYSTEM) CAMERA. A malfunction of the KAFAS camera can occur due to a voltage supply fault. This triggers a Check Control Message (CCM) to be displayed sporadically during the drive cycle- "Driver Assistance support restricted.
Associated Products (5)Associated Documents - November 1, 2019•Document ID: 10169474Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT
- Mfr Comm. #:
- B652219
- Date Added:
- December 16, 2019
- Manufacturer:
- BMW
SummaryNO AUDIO IS AVAILABLE FOR APPROXIMATELY 30 SECONDS AFTER HEAD UNIT START UP: After programming vehicle no audio is available for approximately 30 seconds after head unit start-up. Fault code B7F490 "Control unit reset" is present in the RAM (Receiver Audio Module).
Associated Products (25)Associated Documents - November 1, 2019•Document ID: 10169472Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT
- Mfr Comm. #:
- B651019
- Date Added:
- December 16, 2019
- Manufacturer:
- BMW
SummaryENGINE SPEED DEPENDENT NOISE DURING AUDIO PLAYBACK: Integration level updated. There is an engine speed-dependent noise heard through the speakers during audio playback. Software error in the Receiver Audio Module (RAM) control unit.
Associated Products (26)Associated Documents - November 1, 2019•Document ID: 10169469Service Bulletin/Repair InstructionsELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- B620119
- Date Added:
- December 16, 2019
- Manufacturer:
- BMW
SummaryINSTRUMENT CLUSTER AND ONBOARD COMPUTER INTERMITTENTLY INOPERATIVE: Instrument Cluster (KOMBSP18) functions are intermittently inoperative including: On-board Computer (BC) button on turn signal stalk (BC button shown at left) Radio displays Menu button Turn signal displays Arrows on multifunction steering wheel MFL thumbwheel control.
Associated Products (26)Associated Documents