BMW X2 Service Bulletins (2023)
40 manufacturer communications on file.
- July 10, 2026•Document ID: 11035396EmissionsENGINE
- Mfr Comm. #:
- B120326
- Date Added:
- July 31, 2026
- Manufacturer:
- BMW
SummaryDue to an implementation error in various OBD diagnostics in the vehicle's control units, in very rare cases itmay happen that stored fault memory codes (DTCs) and the MIL (warning light) are not automaticallydeleted even though the underlying malfunction has already been rectified. This does not comply with the statutory OBD specifications.
Associated Products (41)Associated Documents - June 26, 2026•Document ID: 11035496Warranty Program/ExtensionENGINE
- Mfr Comm. #:
- B010224
- Date Added:
- August 3, 2026
- Manufacturer:
- BMW
SummaryThe EVAP systems purge (vent) valve limited warranty for defects in materials and / or workmanship has been extended to 15 years / 150,000 miles as determined from the original first in-service / delivery date.
Associated Products (7)Associated Documents - May 5, 2026•Document ID: 11032730Warranty Program/ExtensionENGINE
- Mfr Comm. #:
- B010224
- Date Added:
- May 18, 2026
- Manufacturer:
- BMW
SummaryThe EVAP systems purge (vent) valve limited warranty for defects in materials or workmanship has been extended to 15 years / 150,000 miles as determined from the original in-service date.
Associated Products (12)Associated Documents - March 11, 2026•Document ID: 11030061EmissionsELECTRICAL SYSTEM
- Mfr Comm. #:
- B120326
- Date Added:
- March 13, 2026
- Manufacturer:
- BMW
SummaryBMW AG is conducting Voluntary Emissions Recall (effective March 11, 2026) on certain Model Year 2023 -2026 BMW vehicles that were produced between January 14, 2022, and September 16, 2025.
Associated Products (38)Associated Documents - March 2, 2026•Document ID: 11030056Service Bulletin/Repair InstructionsWHEELS
- Mfr Comm. #:
- B330126
- Date Added:
- March 13, 2026
- Manufacturer:
- BMW
Summary1. Noise complaint: Humming or clicking type noise in the speed range of 15 – 65 mph can be heard from the rear axle. Seeattached video “V33 01 26 Humming” and “V33 02 26 Clicking” The noise may be amplified depending on road speed. Or 2. Fault memory entry: Customer has Dynamic Stability Control malfunction indicator lamp and/or related Check Control Message. The following fault codes are found in the Integrated Brake module fault memory: 4809B7: Wheel speed sensor - rear left - tooth missing 4809C2: Wheel speed sensor - rear right - tooth missing 480AB4: Wheel speed sensor - rear right – noise monitoring 480AAD: Wheel speed sensor - rear left – noise monitoring
Associated Products (3)Associated Documents - February 18, 2026•Document ID: 11028922Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- B330126
- Date Added:
- February 23, 2026
- Manufacturer:
- BMW
Summary1. Noise complaint: Humming or clicking type noise in the speed range of 15 – 65 mph can be heard from the rear axle. Seeattached video “V33 01 26 Humming” and “V33 02 26 Clicking” The noise may be amplified depending on road speed. Or 2. Fault memory entry: Customer has Dynamic Stability Control malfunction indicator lamp and/or related Check Control Message. The following fault codes are found in the Integrated Brake module fault memory: 4809B7: Wheel speed sensor - rear left - tooth missing 4809C2: Wheel speed sensor - rear right - tooth missing 480AB4: Wheel speed sensor - rear right – noise monitoring 480AAD: Wheel speed sensor - rear left – noise monitoring
Associated Products (4)Associated Documents - June 11, 2025•Document ID: 11019554EmissionsELECTRICAL SYSTEM
- Mfr Comm. #:
- B120425
- Date Added:
- June 17, 2025
- Manufacturer:
- BMW
SummaryEMISSIONS RECALL 25E-A02: PROGRAM CONTROL UNITS
Associated Products (19)Associated Documents - April 26, 2025•Document ID: 11017300Service CampaignELECTRICAL SYSTEM
- Mfr Comm. #:
- B340425
- Date Added:
- April 29, 2025
- Manufacturer:
- BMW
SummaryAs a result of a data input error, certain fault memories are permanently stored. The permanent storage offault memories does not comply with the legal specifications of the authority (California Air Resources Board– CARB). The fault has no effect on the use of the vehicle by the customer.
Associated Products (9)Associated Documents - April 25, 2025•Document ID: 11017277Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- B410225
- Date Added:
- April 28, 2025
- Manufacturer:
- BMW
SummaryWhile driving on a smooth and/or uneven road, a “popping” sound is heard from the bottom of the C-pillar area. This can occur on one and/or both sides on the vehicle C-pillars.
Associated Products (5)Associated Documents - April 25, 2025•Document ID: 11017273Service CampaignELECTRICAL SYSTEM
- Mfr Comm. #:
- B120425
- Date Added:
- April 28, 2025
- Manufacturer:
- BMW
SummaryAs a result of a data input error, certain fault memories are permanently stored. The permanent storage offault memories does not comply with the legal specifications of the authority (California Air Resources Board– CARB). The fault has no effect on the use of the vehicle by the customer.
Associated Products (21)Associated Documents - April 1, 2025•Document ID: 11017083Service CampaignSERVICE BRAKES
- Mfr Comm. #:
- B340425
- Date Added:
- April 17, 2025
- Manufacturer:
- BMW
SummaryAs a result of a data input error, certain fault memories are permanently stored. The permanent storage offault memories does not comply with the legal specifications of the authority (California Air Resources Board– CARB). The fault has no effect on the use of the vehicle by the customer.
Associated Products (13)Associated Documents - March 21, 2025•Document ID: 11015855Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- B280123
- Date Added:
- March 24, 2025
- Manufacturer:
- BMW
SummaryCheck control message (790) “Emergency gearbox release activated” is displayed immediately after starting the engine. This applies only to U11 equipped with the 7-speed M-DCT transmission.
Associated Products (8)Associated Documents - December 20, 2024•Document ID: 11012087Service CampaignPOWER TRAIN
- Mfr Comm. #:
- B280224
- Date Added:
- December 31, 2024
- Manufacturer:
- BMW
SummaryMicro-movements combined with frictional corrosion can increase wear on the longitudinal splined connection between the double clutch transmission (DCT) and the transfer box.
Associated Products (4)Associated Documents - December 19, 2024•Document ID: 11012092Service CampaignELECTRICAL SYSTEM
- Mfr Comm. #:
- B613024
- Date Added:
- December 31, 2024
- Manufacturer:
- BMW
SummaryDue to a software error in the Basic Central Platform (BCP), Remote Software Upgrade (RSU) is no longerpossible.
Associated Products (6)Associated Documents - December 5, 2024•Document ID: 11012082Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- B512924
- Date Added:
- December 31, 2024
- Manufacturer:
- BMW
SummaryThe tailgate/trunk will not latch when closed.
Associated Products (6)Associated Documents - October 19, 2024•Document ID: 11009003Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- B652924
- Date Added:
- October 19, 2024
- Manufacturer:
- BMW
SummaryDuring a parking maneuver with activated Park Distance Control (PDC), intermittently the parking instructions displayed in the Central Information Display (CID) are shown in German. The text in the instructions read: "Mit dem Parken beginnen" or “Einparken Starten” (start parking).
Associated Products (8)Associated Documents - August 16, 2024•Document ID: 11006725Service CampaignPOWER TRAIN
- Mfr Comm. #:
- B280224
- Date Added:
- September 1, 2024
- Manufacturer:
- BMW
SummaryMicro-movements combined with frictional corrosion can increase wear on the longitudinal splinedconnection between the double clutch transmission (DCT) and the transfer box.
Associated Products (2)Associated Documents - August 7, 2024•Document ID: 11006734Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- B520224
- Date Added:
- September 1, 2024
- Manufacturer:
- BMW
SummaryCustomer states they started to receive Check Control messages for the driver’s seat at the end of eachdriving cycle: One or more of the following check control messages (CCM) were present at that time: CCM 434 Seat calibration required. CCM 108 Driver restraint system. Eventually multiple restarts after they first noticed the CCM the seat stopped functioning, the air bag warninglamp illuminated in the instrument cluster, and they received a new Check Control message: CCM 97 Restraint system. There are now 6 DTC faults stored: ACSM6 Air Bag module 930D86 - Function restraint system driver restricted. C95432 - seat module Driver (seat memory), message status backrest locking standardization required. C95434 - seat module Driver (seat memory), message status backrest locking standardizationrecommended. FAS_I20 Driver's Seat module 8029F5 - initialization seat: limited seat adjustment due to missing calibration 802A03 - Functions seat adjustment FAS limited available. 802A05 - ÜKB: Shut-off ÜKB because of missing calibration. Also, one or both of the following check control messages (CCM) may currently be present: CCM 108 “Driver restraint system” CCM 109 “Passenger restraint system” The seat initialization and memory has been lost. Or Repeat failure of seat initialization after completing the test module via ISTA.
Associated Products (8)Associated Documents - July 31, 2024•Document ID: 11005450Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- B520224
- Date Added:
- August 2, 2024
- Manufacturer:
- BMW
SummaryThe seat initialization and memory has been lost; Or Repeat failure of seat initialization after completing the test module via ISTA. One or both of the following check control messages (CCM) may be present: CCM 108 “Driver restraint system” CCM 109 “Passenger restraint system”
Associated Products (5)Associated Documents - July 16, 2024•Document ID: 11005246Service Bulletin/Repair InstructionsVISIBILITY/WIPER
- Mfr Comm. #:
- B660424
- Date Added:
- July 25, 2024
- Manufacturer:
- BMW
SummaryThe washer fluid cleaning system has air remaining in its components, and/or the fluid lines after a previous repair has been performed. The previous repair may have involved draining, opening, and replacingcomponents in the system.
Associated Products (4)Associated Documents