Dodge Charger Service Bulletins (2024)
275 manufacturer communications on file.
- January 6, 2026•Document ID: 11027649Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- 109231
- Date Added:
- January 14, 2026
- Manufacturer:
- JEEP
SummaryLATCH - LIFTGATE
Associated Products (30)2026 Dodge Charger2026 Jeep Grand Cherokee2026 Jeep Grand Cherokee L2026 Jeep Grand Wagoneer2026 Jeep Wagoneer2026 Jeep Wagoneer S2025 Dodge Charger2025 Jeep Grand Cherokee2025 Jeep Grand Cherokee L2025 Jeep Grand Wagoneer2025 Jeep Wagoneer2025 Jeep Wagoneer S2024 Dodge Charger2024 Jeep Grand Cherokee2024 Jeep Grand Cherokee L2024 Jeep Grand Wagoneer2024 Jeep Wagoneer2024 Jeep Wagoneer S2023 Jeep Grand Cherokee2023 Jeep Grand Cherokee L+ 10 moreAssociated Documents - December 19, 2025•Document ID: 11026789Service Bulletin/Repair InstructionsSTRUCTURE:BODY; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-411-25
- Date Added:
- December 23, 2025
- Manufacturer:
- DODGE
SummaryFlash: Driver Door Latch Module (DDLM) and Passenger Door Latch Module (PDLM) Updates Customers may experience one or more of the following: ● Door glass does not drop when opening the door. ● Multiple presses required for passive entry unlock. This bulletin involves reprogramming the DDLM and PDLM with the latest available software.
Associated Products (1)Associated Documents - December 18, 2025•Document ID: 11026779Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-130-25 REV. B
- Date Added:
- December 23, 2025
- Manufacturer:
- DODGE
SummaryRSU With Additional Sleep Cycles for HV Battery Integrity Check - Flash: Integrated Dual Charging Module (IDCM) Updates 11B3 Customers may comment on one or more of the following: ● 12 volt battery lamp on the Instrument Panel Cluster (IPC) illuminated due to depleted 12 volt battery. ● Unable to charge at High Voltage Charging station at Level-1, Level-2 or DC Fast Charge. This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine.
Associated Products (1)Associated Documents - December 18, 2025•Document ID: 11026775Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-126-25 REV. B
- Date Added:
- December 23, 2025
- Manufacturer:
- DODGE
SummaryFlash: Integrated Dual Charging Module (IDCM) Updates 11B3 Customers may comment on one or more of the following: ● 12 volt battery lamp on the Instrument Panel Cluster (IPC) illuminated due to depleted 12 volt battery. ● Unable to charge at High Voltage Charging station at Level-1, Level-2 or DC Fast Charge. This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine.
Associated Products (1)Associated Documents - December 18, 2025•Document ID: 11026771Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-075-25 REV. C
- Date Added:
- December 23, 2025
- Manufacturer:
- DODGE
SummaryRSU With Additional Sleep Cycles for HV Battery Integrity Check - Flash: Electronic Vehicle Control Unit (EVCU) Updates 11B3 Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **B12B4-00 - Charge Status Indicator Module Internal.** ● C10FA-00 - Wheel Hub disconnect Actuator Performance Left. ● C10FB-00 - Wheel Hub disconnect Actuator Performance Right. ● C10F8-00 - Left Front Wheel Hub Disconnect Actuator Position Sensor Circuit Range/Performance. ● C10F9-00 - Right Front Wheel Hub Disconnect Actuator Position Sensor Circuit Range/Performance. ● P061B-00 - Internal Control Module Torque Calculation Performance. Customers may also comment on one or more of the following: ● **Loss of communication between EVCU and the Battery Pack Control Module (BPCM) can prevent high-voltage contactors from closing, resulting in a no-start condition. ● Remote start functionality fails when the vehicle is actively charging. ● "Charge Now" feature in application has multiple issues. Feature intermittently fails and does not close contactors, sometimes starts but charge port indicator lights are not commanded by EVCU and sets DTC B12B4-00. ● Closed loop 12V silent charging which can help mitigate a 12V drain issue on the vehicle. ● Drive-by-brake improvements and a resolved issue where the vehicle incorrectly enters turtle mode while driving. ● Powershot sometimes stuck at 0 seconds remaining which makes customer believe that Powershot is not working. ● Wheel End Disconnect closure at zero speed in case of miss at normal close speed. ● Drive-by-brake message update to Instrument Panel Cluster (IPC) in case of Limp Home mode. ● Vehicle will not start due to depleted 12v battery. ● Improvements to minimize occurrences of Limp Home Mode (Turtle Mode)** ● IPC, radio range and charge time estimations and messages are not correct. ● Battery range incorrect. ● Improved battery State of Charge (SoC) accuracy in off-nominal conditions. ● Battery heating values incorrect on radio when on Performance Pages display. ● Charging does not start when plugged in. ● Charging is not indicating when battery is at full charge. ● Charging slow or takes too long. ● Bumps and jerks while accelerating or decelerating. ● Wrench icon is illuminated on the IPC This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine
Associated Products (1)Associated Documents - December 18, 2025•Document ID: 11026769Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-072-25 REV. C
- Date Added:
- December 23, 2025
- Manufacturer:
- DODGE
SummaryRSU With Additional Sleep Cycles for HV Battery Integrity Check - Flash: Motor Control Processor A (MCP A) Updates 11B3 Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● **P1E18-00 - Internal Control Module Electronic Park Performance. ● P1625-00 - Park Pawl System Failure. ● P0A78-00 - Drive Motor A Inverter Performance. ● P0A79-00 - Drive Motor B Inverter Performance.** ● P1626-00 - Park Pawl Motor Stuck. The customer may comment on one or more of the following symptoms: ● **Vehicle will not power down causing a 12V battery drain. ● Vehicle does not start.** ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine
Associated Products (1)Associated Documents - December 18, 2025•Document ID: 11026768Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-071-25 REV. D
- Date Added:
- December 23, 2025
- Manufacturer:
- DODGE
SummaryRSU With Additional Sleep Cycles for HV Battery Integrity Check - Flash: Motor Control Processor A (MCP A) Updates 11B3 Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● **P1E18-00 - Internal Control Module Electronic Park Performance. ● P1625-00 - Park Pawl System Failure. ● P0A78-00 - Drive Motor A Inverter Performance. ● P0A79-00 - Drive Motor B Inverter Performance.** ● P1626-00 - Park Pawl Motor Stuck. The customer may comment on one or more of the following symptoms: ● **Vehicle will not power down causing a 12V battery drain. ● Vehicle does not start.** ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine
Associated Products (1)Associated Documents - December 18, 2025•Document ID: 11026767Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-070-25 REV. C
- Date Added:
- December 23, 2025
- Manufacturer:
- DODGE
SummaryRSU With Additional Sleep Cycles for HV Battery Integrity Check - Flash: Motor Control Processor A (MCP A) Updates 11B3 Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● **P1E18-00 - Internal Control Module Electronic Park Performance. ● P1625-00 - Park Pawl System Failure. ● P0A78-00 - Drive Motor A Inverter Performance. ● P0A79-00 - Drive Motor B Inverter Performance.** ● P1626-00 - Park Pawl Motor Stuck. The customer may comment on one or more of the following symptoms: ● **Vehicle will not power down causing a 12V battery drain. ● Vehicle does not start.** ● Wrench icon is illuminated on the Instrument Panel Cluster (IPC). ● Turtle icon illuminated on the IPC. ● Reduced power. ● Vehicle will not shift out of park This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine
Associated Products (1)Associated Documents - December 18, 2025•Document ID: 11026764Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-026-25 REV. D
- Date Added:
- December 23, 2025
- Manufacturer:
- DODGE
SummaryFlash: Electronic Vehicle Control Unit (EVCU) Updates 11B3 Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **B12B4-00 - Charge Status Indicator Module Internal.** ● C10FA-00 - Wheel Hub disconnect Actuator Performance Left. ● C10FB-00 - Wheel Hub disconnect Actuator Performance Right. ● C10F8-00 - Left Front Wheel Hub Disconnect Actuator Position Sensor Circuit Range/Performance. ● C10F9-00 - Right Front Wheel Hub Disconnect Actuator Position Sensor Circuit Range/Performance. ● P061B-00 - Internal Control Module Torque Calculation Performance. Customers may also comment on one or more of the following: ● **Will not be able to start the vehicle. ● 12V battery dead resulting in no start. ● Improvements to minimize occurrences of Limp Home Mode (Turtle Mode). ● Loss of communication between EVCU and the Battery Pack Control Module (BPCM) can prevent high- voltage contactors from closing, resulting in a no-start condition. ● Remote start functionality fails when the vehicle is actively charging. ● "Charge Now" feature in application has multiple issues. Feature intermittently fails and does not close contactors, sometimes starts but charge port indicator lights are not commanded by EVCU and sets DTC B12B4-00. ● Closed loop 12V silent charging which can help mitigate the 12V drain issue on the vehicle. ● Highway creep improvements and a resolved issue where the vehicle incorrectly enters turtle mode while driving. ● Powershot sometimes stuck at 0 seconds remaining which makes customer believe that Powershot is not working. ● Wheel End Disconnect closure at zero speed in case of miss at normal close speed. ● Drive-by-brake message update to Instrument Panel Cluster (IPC) in case of Limp Home mode.** ● Instrument Panel Cluster (IPC), radio range and charge time estimations and messages are not correct. ● Battery range incorrect. ● Improved battery State of Charge (SoC) accuracy in off-nominal conditions. ● Battery heating values incorrect on radio when on Performance Pages display. ● Charging does not start when plugged in. ● Charging is not indicating when battery is at full charge. ● Charging slow or takes too long. ● Bumps and jerks while accelerating or decelerating. ● Wrench icon is illuminated on the IPC. ● Turtle icon is illuminated on the IPC. ● Vehicle enters into limp home mode. In addition, the following software enhancement is also available: ● Enables compatibility with the Flo V3 Chargers This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine
Associated Products (1)Associated Documents - December 18, 2025•Document ID: 11026761Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-023-25 REV. D
- Date Added:
- December 23, 2025
- Manufacturer:
- DODGE
SummaryFlash: Motor Control Processor A (MCP A) Updates 11B3 Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): ● **P1E18-00 - Internal Control Module Electronic Park Performance. ● P1625-00 - Park Pawl System Failure. ● P0A78-00 - Drive Motor A Inverter Performance. ● P0A79-00 - Drive Motor B Inverter Performance.** ● P1626-00 - Park Pawl Motor Stuck. Customers may also comment on one or more of the following: ● **Will not be able to start the vehicle. ● Vehicle not shutting off and a draining 12V battery.** ● Wrench lamp on in the Instrument Panel Cluster (IPC). ● Not able to move the shifter out of Park. ● Vehicle has reduced power. This bulletin also includes the following software enhancement: ● Software enhancement to prevent erroneous fault identification resulting in inverter shutdown. This bulletin involves reprogramming the BPCM, MCP A, MCP B and the EVCU with the latest available software and then performing a Wheel End Disconnect Position Learn routine
Associated Products (1)Associated Documents - December 18, 2025•Document ID: 11026760Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-022-25 REV. D
- Date Added:
- December 23, 2025
- Manufacturer:
- DODGE
SummaryFlash: Battery Pack Control Module (BPCM) Updates 11B3 Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P1E25 - EV Battery Failure Level 2 ● P0D10 - Battery Charging System Negative Contactor "A" - Actuator Stuck Open ● P0D09 - Battery Charging System Positive Contactor "A" - Actuator Stuck Open** ● P0DE6 - Hybrid/EV Battery Pack Cell Voltage Low. NOTE: Active or stored. ● P1DAF - Incompatible Limp In Action Requested. NOTE: Active or stored. ● P1CDE - Hybrid/EV Wakeup Control 2 Output Circuit Short to Ground. ● P1CDA - Hybrid/EV Wakeup Control 1 Output Circuit/Open. ● U00C6 - Lost Communication With AIR Pressure Sensor. ● P0F00 - Hybrid/EV Battery Module 1 Performance. ● P0F01 - Hybrid/EV Battery Module 2 Performance. ● P0F02 - Hybrid/EV Battery Module 3 Performance. ● P0F03 - Hybrid/EV Battery Module 4 Performance. ● P0F04 - Hybrid/EV Battery Module 5 Performance. ● P0F05 - Hybrid/EV Battery Module 6 Performance. ● P0F06 - Hybrid/EV Battery Module 7 Performance. ● P0F07 - Hybrid/EV Battery Module 8 Performance. ● P0F08 - Hybrid/EV Battery Module 9 Performance. ● P0F09 - Hybrid/EV Battery Module 10 Performance. ● P0F0A - Hybrid/EV Battery Module 11 Performance. ● P0F0B - Hybrid/EV Battery Module 12 Performance. ● P0F0C - Hybrid/EV Battery Module 13 Performance. ● P0CA6-00 - Hybrid/EV Battery Charging Current High. NOTE: If the following DTCs are present/active in the BPCM, Battery Pack replacement will be required. Guided Diagnostics will prompt you for the repair action if the diagnostic is present on the vehicle. ● P0ADB-00 - Hybrid/EV Battery Positive Contractor A Control Circuit Low. ● P0AE2-00 - Hybrid/EV Battery Precharge Contactor Circuit Stuck Closed. ● P0AA1-00 - Hybrid/EV Battery Positive Contactor "A" Stuck Closed. ● P0FF8-00 - Hybrid/EV Battery Precharge Contactor Circuit "B" Stuck Closed. Customers may also comment on one or more of the following: ● **Will not be able to start the vehicle. ● A warning message will appear in the Instrument Panel Cluster (IPC) informing the driver to stop safely because the vehicle will be shutting down soon.** ● Wrench icon is illuminated on the IPC. ● Vehicle will not enter Drive Ready Mode. This bulletin also includes the following software enhancement: ● Bootloader update to prevent battery disconnect unit damage. ● Improvements in detecting pre-existing battery disconnect unit damage. ● Charging related enhancements that may lead to DTC P0CA6 falsely setting This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine.
Associated Products (1)Associated Documents - December 18, 2025•Document ID: 11026759Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-021-25 REV. D
- Date Added:
- December 23, 2025
- Manufacturer:
- DODGE
SummaryFlash: Motor Control Processor B (MCP B) Updates 11B3 Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): ● **P1E18-00 - Internal Control Module Electronic Park Performance. ● P1625-00 - Park Pawl System Failure. ● P0A78-00 - Drive Motor A Inverter Performance. ● P0A79-00 - Drive Motor B Inverter Performance.** ● P1626-00 - Park Pawl Motor Stuck. Customers may also comment on one or more of the following: ● **Will not be able to start the vehicle. ● Vehicle not shutting off and a draining 12V battery.** ● Wrench lamp on in the Instrument Panel Cluster (IPC). ● Not able to move the shifter out of Park. ● Vehicle has reduced power. This bulletin also includes the following software enhancement: ● Software enhancement to prevent erroneous fault identification resulting in inverter shutdown This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine
Associated Products (1)Associated Documents - December 17, 2025•Document ID: 11026810Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- S2508000056 REV.A
- Date Added:
- December 23, 2025
- Manufacturer:
- JEEP
Summary12v Ignition Off Draw (IOD) Caused By Power Electronics Coolant Pump 1 (PECP-1) Continuously Running When Vehicle Is Asleep
Associated Products (4)Associated Documents - December 15, 2025•Document ID: 11026799Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 9100747
- Date Added:
- December 23, 2025
- Manufacturer:
- DODGE
SummaryB1578 DTC active (Audio Antenna Circuit Resistance Below Threshold) in LB production vehicles. Do not diagnose stored or active DTC unless there is a customer facing issue noted. A SOL will be released to give further information.
Associated Products (3)Associated Documents - December 12, 2025•Document ID: 11026677Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-394-25 REV. A
- Date Added:
- December 17, 2025
- Manufacturer:
- DODGE
SummaryTelematics Box Module (TBM) Backup Battery Replacement When DTC B1E21 Is Present Technicians may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): ● B1E21-96 - Backup Battery Component Internal Failure.
Associated Products (106)2026 Alfa Romeo Stelvio2026 Alfa Romeo Tonale2026 Chrysler Pacifica2026 Dodge Charger2026 Dodge Durango2026 Dodge Hornet2026 Jeep Compass2026 Jeep Gladiator2026 Jeep Grand Cherokee2026 Jeep Grand Cherokee L2026 Jeep Grand Wagoneer2026 Jeep Recon2026 Jeep Wagoneer2026 Jeep Wagoneer S2026 Jeep Wrangler2026 Ram 15002026 Ram 25002026 Ram 35002026 Ram 45002026 Ram 5500+ 86 moreAssociated Documents - December 12, 2025•Document ID: 11026642Service Bulletin/Repair InstructionsSEATS
- Mfr Comm. #:
- S2508000107
- Date Added:
- December 17, 2025
- Manufacturer:
- JEEP
SummaryComfort Seat Module (CSM) or Comfort Steering Wheel Module (CSWM) do Not Operate
Associated Products (33)2026 Dodge Charger2026 Jeep Grand Cherokee2026 Jeep Grand Cherokee L2026 Jeep Grand Wagoneer2026 Jeep Wagoneer2026 Jeep Wagoneer S2026 Ram 15002026 Ram 25002026 Ram 35002026 Ram 45002026 Ram 55002025 Dodge Charger2025 Jeep Grand Cherokee2025 Jeep Grand Cherokee L2025 Jeep Grand Wagoneer2025 Jeep Wagoneer2025 Jeep Wagoneer S2025 Ram 15002025 Ram 25002025 Ram 3500+ 13 moreAssociated Documents - December 10, 2025•Document ID: 11026660Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 9100734
- Date Added:
- December 17, 2025
- Manufacturer:
- JEEP
SummaryIf the DTC B1E21-96: Backup Battery-Component Internal Failure is active and customer states Popup message will show at the radio: "Battery of Uconnect Box requires service. SOS call and related functions may be unavailable. Please visit an authorized dealer." PLEASE do not Replace the TBM module, only replace TBM Internal Battery (inside Telematics Box Module) and order PN68493347
Associated Products (105)2026 Alfa Romeo Stelvio2026 Alfa Romeo Tonale2026 Chrysler Pacifica2026 Chrysler Voyager2026 Dodge Charger2026 Dodge Durango2026 Dodge Hornet2026 Jeep Compass2026 Jeep Gladiator2026 Jeep Grand Cherokee2026 Jeep Grand Cherokee L2026 Jeep Grand Wagoneer2026 Jeep Recon2026 Jeep Renegade2026 Jeep Wagoneer2026 Jeep Wagoneer S2026 Jeep Wrangler2026 Ram 15002026 Ram 25002026 Ram 3500+ 85 moreAssociated Documents - December 10, 2025•Document ID: 11026635Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- S2508000105
- Date Added:
- December 17, 2025
- Manufacturer:
- JEEP
SummaryVehicle Does Not Start or Has Multiple Warning Lamps That Are On, Airbag Warning Lamp, Seatbelt Reminder Light, ABS Light & SOS Unavailable Message
Associated Products (4)Associated Documents - December 9, 2025•Document ID: 11026672Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-395-25
- Date Added:
- December 17, 2025
- Manufacturer:
- JEEP
SummaryDepleted Battery Caused By Auxiliary Coolant Pumps Customers may comment on one or more of the following: ● Vehicle does not start due to a depleted battery. ● Customers may describe that a pump type noise is heard from the vehicle after ignition is set to OFF This bulletin involves replacing the auxiliary coolant pump assembly.Depleted Battery Caused By Auxiliary Coolant Pumps Customers may comment on one or more of the following: ● Vehicle does not start due to a depleted battery. ● Customers may describe that a pump type noise is heard from the vehicle after ignition is set to OFF This bulletin involves replacing the auxiliary coolant pump assembly.
Associated Products (5)Associated Documents - December 5, 2025•Document ID: 11026549Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-394-25
- Date Added:
- December 11, 2025
- Manufacturer:
- ALFA ROMEO
SummaryTelematics Box Module (TBM) Backup Battery Replacement When DTC B1E21 Is Present echnicians may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): ● B1E21-96 - Backup Battery Component Internal Failure
Associated Products (103)2026 Alfa Romeo Stelvio2026 Alfa Romeo Tonale2026 Chrysler Pacifica2026 Chrysler Voyager2026 Dodge Charger2026 Dodge Durango2026 Dodge Hornet2026 Jeep Compass2026 Jeep Gladiator2026 Jeep Grand Cherokee2026 Jeep Grand Cherokee L2026 Jeep Grand Wagoneer2026 Jeep Recon2026 Jeep Wagoneer2026 Jeep Wrangler2026 Ram 15002026 Ram 25002026 Ram 35002026 Ram 45002026 Ram 5500+ 83 moreAssociated Documents