2021-2025 Jeep Wrangler / Gladiator Air Filter Quality Inspection
Jeep has issued a Quality Inspection Request (NHTSA ID 11012292) for certain 2021-2025 Wrangler and Gladiator vehicles concerning suspect air filters, part number 68257030AA. Dealers are instructed to identify and return affected parts from inventory.

Also applies to
- Jeep Gladiator
- 2021–2025
- Jeep Wrangler
- 2021, 2022, 2023, 2025
Understanding the Quality Inspection Request for Jeep Air Filters
Jeep has released an important Quality Inspection Request, identified by NHTSA ID 11012292 and Mopar Communication 101792. This communication, titled "FILTER - AIR," is a proactive measure primarily aimed at dealerships to manage their inventory and prevent the installation of potentially suspect air filters. This is not a typical recall for vehicles already on the road experiencing a specific symptom. Instead, it focuses on identifying and removing certain air filters from the supply chain before they can be installed in new vehicles or as replacement parts during service. Owners of 2021-2025 Jeep Wrangler and Gladiator vehicles should be aware of this action, as it pertains to a critical engine component. The primary concern addressed here is the "Jeep Wrangler air filter" quality.
Identifying the Affected Air Filter Part Number and Production Dates
The Quality Inspection Request specifically targets air filter part number 68257030AA. These air filters are deemed suspect if they were manufactured within a precise date range. According to the communication, the suspect parts are those built between 24.06.01 and 24.10.18. This corresponds to a production period from June 1, 2024, to October 18, 2024.
The manufacturing date code is typically stamped directly on the air filter itself. This code usually follows a "YY.MM.DD" format. For instance, a date code of "24.11.08" would signify a manufacturing date of November 8, 2024. It is crucial for both dealerships and owners to note this specific date range when identifying the "Jeep Wrangler air filter" components that are subject to this inspection.
Dealership Responsibilities and Inventory Management
Dealerships that have been identified as possessing stock of these air filters, whether currently in their inventory or in transit, have received clear and detailed instructions. They are mandated to meticulously check their entire stock for the suspect air filter part number 68257030AA.
The directive from Jeep requires dealers to return all identified suspect parts to their designated facing depot. This return process must utilize Return Code 02 and needs to be completed by January 6, 2025. Furthermore, dealers are explicitly advised to cancel any existing open orders for these suspect parts and to promptly place new orders for compliant replacement air filters. Any questions or concerns regarding these return procedures can be directed to [email protected]. This comprehensive inventory management strategy is designed to ensure that only high-quality "Jeep Wrangler air filter" components are utilized in all service and new vehicle applications.
Importance of Air Filter Quality
The air filter is a vital component in your vehicle's engine system. Its primary function is to prevent dust, dirt, and other contaminants from entering the engine, which could otherwise lead to premature wear, reduced performance, and potential damage. A compromised or suspect air filter, such as the 68257030AA units manufactured between June 1 and October 18, 2024, could potentially fail to perform this critical function effectively. While the specific nature of the "suspect" condition is not detailed in the communication, such issues often relate to manufacturing defects that could impair filtration efficiency or structural integrity. Ensuring that only properly functioning air filters are installed is paramount for maintaining engine health and longevity in your 2021-2025 Jeep Wrangler or Gladiator.
What Jeep Owners Should Know
Although this communication is primarily an internal directive for dealerships, it holds relevance for owners of affected 2021-2025 Jeep Wrangler and Gladiator models. If your vehicle requires an air filter replacement, or if you have recently had one installed, it is prudent to be informed about this Quality Inspection Request (NHTSA ID 11012292).
We recommend that you inquire with your dealership about this specific communication. You can ask them to confirm that any air filter installed in your vehicle, or any replacement part number 68257030AA they might use, falls outside the identified suspect production dates of June 1 to October 18, 2024. This proactive approach helps ensure that your "Jeep Wrangler air filter" is not from the batch identified for removal from inventory. Staying informed about such manufacturer communications helps maintain the optimal performance and reliability of your vehicle.
Source: NHTSA ID: 11012292
Gallery
2 images
Frequently Asked Questions
- What is NHTSA ID 11012292 about?
- NHTSA ID 11012292 refers to a Quality Inspection Request issued by Jeep for certain air filters, part number 68257030AA, intended for 2021-2025 Jeep Wrangler and Gladiator vehicles.
- Which air filters are considered suspect?
- Air filters with part number 68257030AA that were manufactured between June 1, 2024 (24.06.01) and October 18, 2024 (24.10.18) are identified as suspect.
- What should I do if I own a 2021-2025 Jeep Wrangler or Gladiator?
- While this is primarily a dealer-level inventory action, if your vehicle needs an air filter replacement, you can ask your dealership to confirm that any installed part number 68257030AA is not from the suspect production batch.
- How can I identify the manufacturing date of an air filter?
- The manufacturing date is typically stamped on the air filter itself, often in a "YY.MM.DD" format. For example, "24.11.08" would mean November 8, 2024.
Related Articles
2024 Jeep Wrangler Problems: Recalls, Complaints & TSBs
The 2024 Jeep Wrangler has faced four safety recalls, primarily concerning exterior lighting and airbag deployment. While no owner complaints or federal investigations have been reported, twenty manufacturer service bulletins address various issues from engine performance and electrical glitches…
2024-2026 Jeep, Ram, Dodge Cylinder Head Bolt Inspection
Mopar has issued a Quality Inspection Request (QIR) concerning cylinder head cover bolts, part number 04893799AJ, for various 2024-2026 Jeep, Ram, and Dodge models. Dealers are instructed to identify and quarantine suspect bolts with a chamfered flange.
2024 Jeep Wrangler PCM Update for Misfire & O2 Sensor DTCs
A Technical Service Bulletin (TSB 18-003-26 REV. A) has been issued for the 2024 Jeep Wrangler to address various engine performance issues, including misfires, rough idle, and O2 sensor fault codes. This update involves reprogramming the Powertrain Control Module (PCM).
2021-2026 Jeep Wrangler / Gladiator Wind Noise TSB S2623000018
This technical service bulletin, S2623000018, addresses "Wind Noise From Hard Top Freedom Panels Near Rear View Mirror While Driving" in 2021-2026 Jeep Wrangler and Gladiator models, detailing a diagnostic and repair procedure involving the header seal.
2024 Jeep Wrangler Heated Steering Wheel Not Working TSB
If your 2024 Jeep Wrangler's heated steering wheel isn't working or isn't warm enough, Technical Service Bulletin (TSB) 08-121-26 from Stellantis outlines a software update for the Comfort Seat Wheel Module (CSWM) to resolve the issue.
Leave a comment
Comments are moderated and may take a moment to appear. Only your first name and the initial of your last name are shown publicly.
Comments
Be the first to comment.