2021-2023 BMW Tail Light Condensation TSB
A manufacturer communication, NHTSA ID 10239610, addresses the issue of condensation appearing on the inner surfaces of taillights in various 2021-2023 BMW models. This can affect one or both taillights and should be inspected by a BMW service center.

Şu araçlar için de geçerli
- BMW 330e
- 2021–2023
- BMW 330i
- 2021–2023
- BMW 430i
- 2021–2023
- BMW 840i
- 2021–2022
- BMW i4
- 2022–2023
- BMW M3
- 2021–2023
- BMW M340i
- 2021–2023
- BMW M4
- 2021–2023
- BMW M440i
- 2021–2022
- BMW M8
- 2021–2022
- BMW M850i
- 2021–2022
- BMW X5
- 2021, 2023
- BMW X6
- 2021–2022
- BMW X7
- 2021–2023
- BMW Z4
- 2021–2023
▸ 9 tane daha göster▾ Daha az göster
Symptoms
Owners of certain 2021-2023 BMW vehicles may notice BMW tail light condensation appearing on the inner surfaces of their taillights. This can affect either one taillight or both, and is visible from the exterior of the vehicle.
The specific symptom described is: "Condensation is present on the inner surfaces in one or both taillights". This indicates moisture has accumulated within the taillight assembly, which can potentially affect light output or longevity of the unit.
Diagnosis and Trigger Conditions
The presence of BMW tail light condensation is typically identified through visual inspection. If you observe moisture or fogging inside your taillight lens, this manufacturer communication applies to your vehicle. The document does not specify particular environmental conditions that trigger the condensation, but it is generally a sign of a seal integrity issue or insufficient ventilation within the lamp housing.
Repair Procedure Summary
This manufacturer communication, NHTSA ID 10239610, addresses the concern of condensation in the taillights. While the document summary does not detail a specific repair procedure, such issues typically require a diagnostic assessment by a BMW technician. Depending on the cause and severity of the condensation, the resolution may involve inspecting the taillight seals, ensuring proper ventilation, or potentially replacing the taillight assembly if it is deemed faulty.
Owner Action
If you are experiencing BMW tail light condensation in your 2021-2023 BMW, it is recommended to schedule an appointment with an authorized BMW service center. Be prepared to describe the issue and point out which taillight(s) are affected. Reference manufacturer communication NHTSA ID 10239610 when discussing the problem with the service advisor.
Your dealer will be able to diagnose the specific cause of the condensation and perform any necessary repairs or replacements under warranty, if applicable.
Important Warnings
BMW is not explicitly notifying consumers about this specific manufacturer communication. Owners should proactively check their vehicles for the described symptom. If you notice "Condensation is present on the inner surfaces in one or both taillights", contact your dealership.
Source: NHTSA ID 10239610
Frequently Asked Questions
- What does 'BMW tail light condensation' mean?
- BMW tail light condensation refers to the presence of moisture or fogging visible on the inside surfaces of your vehicle's taillight lenses. This indicates that water vapor has entered the sealed taillight assembly.
- Which BMW models are affected by taillight condensation according to NHTSA ID 10239610?
- Manufacturer communication NHTSA ID 10239610 applies to various 2021-2023 BMW models, including the X5, Z4, 430i, 330i, X7, M4, M3, 330e, i4, M340i, M850i, X6, M8, and 840i.
- Is BMW notifying owners about this taillight condensation issue?
- No, BMW is not explicitly notifying consumers about this manufacturer communication. Owners should be aware of the potential for 'Condensation is present on the inner surfaces in one or both taillights' and contact their dealer if they observe this symptom.
- What should I do if I see moisture inside my BMW's taillight?
- If you notice moisture or condensation inside your BMW's taillight, you should contact an authorized BMW service center. They can inspect the taillight and determine the appropriate resolution, referencing manufacturer communication NHTSA ID 10239610.
Related Articles
2022 BMW Front Axle Grease Buildup SIB 31 01 22
This BMW Service Information Bulletin SIB 31 01 22 clarifies that grease buildup on front axle CV boots is often normal. It provides guidelines for when a CV boot or axle half-shaft replacement is truly necessary for 2022 BMW X-series and 2 Series Gran Coupe models.
2021-2023 BMW X5, X6, X7 Knee Airbag Warning TSB
BMW has released Service Information Bulletin SIB 65 27 24 to address a common issue in 2021-2023 X5, X6, and X7 models where chafing wiring can cause a knee airbag fault and trigger a red airbag warning light. This bulletin outlines the repair procedure to prevent future damage.
2022-2024 BMW Valvetronic Emissions Recall 24E-A02
BMW's Voluntary Emissions Recall 24E-A02 addresses a DME calibration error affecting Valvetronic systems in certain 2022-2024 X5, X6, X7, XM, and 7 Series vehicles. The recall, documented in SIB 12 02 24, involves a software update to correct the issue.
2022-2025 BMW Emissions Recall: Program Control Units
BMW has announced Emissions Recall 25E-A02, identified as Service Information Bulletin SIB 12 04 25, for certain 2022-2025 models. A software error causes permanent storage of fault memories, requiring control unit reprogramming to comply with emissions regulations.
2022-2023 BMW Delivery Stop: Integrated Braking System
BMW has issued Service Information Bulletin SIB 34 04 25, a delivery stop for certain 2022-2023 models. This action addresses a data input error causing permanent storage of fault memories in the integrated braking system control unit, which is resolved by a software update.
Yorum bırakın
Yorumlar moderasyondan geçer ve görünmesi biraz zaman alabilir. Sadece adınız ve soyadınızın baş harfi herkese açık olarak gösterilir.
Yorumlar
İlk yorum sizden olsun.