2023-2026 Audi Gesture-Controlled Rear Lid Not Working TSB
Audi has issued TSB 2067818/2 for 2023-2026 models where the gesture-controlled rear lid is not working. The bulletin clarifies that this feature was discontinued from Model Year 2023, and no repair or action is required for the B13034A DTC.

Şu araçlar için de geçerli
- Audi A4
- 2023–2025
- Audi A4 allroad
- 2023–2025
- Audi A5
- 2023–2025
- Audi A6
- 2023–2025
- Audi A6 allroad
- 2023–2024
- Audi A7
- 2023–2025
- Audi e-tron GT
- 2023–2025
- Audi RS 5
- 2023–2025
- Audi RS 7
- 2023–2024
- Audi RS e-tron GT
- 2023–2024
- Audi S4
- 2023–2025
- Audi S5
- 2023–2025
- Audi S6
- 2023–2025
- Audi S7
- 2023–2024
- Audi S8
- 2023–2025
▸ 9 tane daha göster▾ Daha az göster
Owners of various 2023-2026 Audi models may notice that their Audi gesture-controlled rear lid is not working as expected. This behavior is addressed by Audi Technical Service Bulletin (TSB) 55 23 80 2067818/2, issued on October 16, 2023. This bulletin clarifies that the gesture-controlled rear lid function has been discontinued for these model years.
Important Information for Owners
This TSB is critical for owners to understand, as it prevents unnecessary diagnostic work or attempted repairs for a feature that is no longer supported. Audi explicitly states that no work is required to address the non-functional Audi gesture-controlled rear lid.
- No notification: Audi is NOT notifying consumers about this change. Owners should be aware that the feature is no longer available.
- Do not replace parts: Do not attempt to replace components related to the gesture-controlled rear lid system, as this will not resolve the issue. The feature cannot be enabled, even if some parts were initially installed at the factory.
- No warranty claim: This TSB is informational only and is not applicable to any Audi warranty claims.
Symptoms
The primary symptom owners will experience is that the gesture-controlled rear lid not working. This means the rear lid (trunk or tailgate) will not open or close by performing a kicking motion under the bumper, which was previously a supported feature.
Fault Codes / DTCs
Technicians may find the following Diagnostic Trouble Code (DTC) stored in the vehicle's system:
| Code | Description | Module |
|---|---|---|
| B13034A | Control module for rear lid opening, incorrect component installed in the Comfort System Central Control Module (address word 0046) |
This DTC, B13034A, indicates that an incorrect component is installed in the Comfort System Central Control Module. However, as explained in the TSB, this is not a fault requiring repair.
Technical Background
Audi has discontinued the gesture-controlled rear lid function for Model Year 2023 and newer vehicles. This change is identified by PR number BU2. Even if some components of the system, such as control units or sensors, were installed in early 2023 model year vehicles, the feature is deactivated and cannot be enabled.
What Owners Should Know
If you own a 2023-2026 Audi model and your Audi gesture-controlled rear lid is not working, you should be aware that this is not a malfunction. The feature has been intentionally removed from these vehicles. Any related event memory entries or DTC B13034A should be ignored by technicians, as no repair is possible or necessary. The vehicle is functioning as designed for these model years without this specific feature.
Superseded Information
This Technical Service Bulletin, 55 23 80 2067818/2, supersedes the previous TSB Group 55 number 22-71, which was dated August 18, 2022.
Source: NHTSA ID: 10244483
Frequently Asked Questions
- What does Audi TSB 55 23 80 2067818/2 address?
- This Audi Technical Service Bulletin addresses the issue of the gesture-controlled rear lid not working in various 2023-2026 Audi models. It clarifies that this feature has been discontinued from Model Year 2023 onwards.
- Why is my 2023-2026 Audi's gesture-controlled rear lid not working?
- The gesture-controlled rear lid function was discontinued by Audi starting with Model Year 2023 (PR number BU2). Therefore, if you own a 2023-2026 Audi, the feature is intentionally not available and will not work.
- What does DTC B13034A mean in the context of the gesture-controlled rear lid?
- DTC B13034A indicates an 'incorrect component installed in the Comfort System Central Control Module' related to the rear lid opening. However, for 2023-2026 Audi models, this code should be ignored as it reflects the discontinuation of the feature, not a fault requiring repair.
- Do I need to take my Audi to the dealer for the non-functional gesture-controlled rear lid?
- No, according to TSB 55 23 80 2067818/2, no work is required. The gesture-controlled rear lid feature cannot be enabled, and any attempts to repair it would be unnecessary.
Bu TSB'nin diğer revizyonları
Related Articles
2022-2026 Audi e-tron GT 12V Battery Discharged TSB 2075846/3
Audi Technical Service Bulletin 2075846/3 addresses a discharged 12V battery condition in 2022-2026 e-tron GT and RS e-tron GT vehicles, often accompanied by DTC P1D6C00. This TSB outlines a software update procedure to resolve the issue.
2025-2026 Audi e-tron GT Active Suspension Noise TSB
Audi has released Technical Service Bulletin 2080798/1 for 2025-2026 e-tron GT and RS e-tron GT models equipped with active suspension (PR code 1P8). It addresses noises heard when driving over bumps and outlines diagnostic procedures for technicians.
2026 Audi e-tron GT Roll Stabilization Configuration Aborted TSB
Audi Technical Service Bulletin 2080608/1 addresses an issue where roll stabilization configuration for diagnostic addresses 00D4 and 00D5 is aborted on 2026 Audi e-tron GT and RS e-tron GT vehicles. This TSB provides diagnostic steps for technicians.
2021-2026 Audi Ceramic Brake Repair Advisory
Audi has released a manufacturer communication, NHTSA ID 11027374, regarding ceramic brake repairs on various 2021-2026 Audi models. Technicians are required to contact the Technical Assistance Center (TAC) before proceeding with any brake service on vehicles equipped with ceramic brakes.
2022-2026 Audi e-tron GT C1399F0 Brake-In Mode TSB
Audi Technical Service Bulletin (TSB) 2063679/6 addresses Diagnostic Trouble Code (DTC) C1399F0 in 2022-2026 Audi e-tron GT, RS e-tron GT, and S e-tron GT models. This code indicates the vehicle is in a normal brake application mode for new or replaced brake components and typically requires no…
Yorum bırakın
Yorumlar moderasyondan geçer ve görünmesi biraz zaman alabilir. Sadece adınız ve soyadınızın baş harfi herkese açık olarak gösterilir.
Yorumlar
İlk yorum sizden olsun.