2022 Audi e-tron Pre-Delivery Inspection Guidelines

Audi has issued a Vehicle Detail Report for all 2022 models, including the Audi e-tron, outlining critical steps and warnings for pre-delivery inspection (PDI) and detailing. This document ensures vehicles meet Audi's quality standards before customer delivery, covering everything from exterior cleaning to interior checks and under-hood inspections. Adhering to these guidelines is crucial for maintaining vehicle integrity and ensuring customer satisfaction.

Important Warnings for Vehicle Preparation

This report includes several vital warnings that technicians and detailers must observe to prevent damage, ensure safety, and avoid unnecessary service. These are particularly important during the Audi e-tron pre-delivery inspection process.

• "WARNING: DO NOT use accessories (radio, etc.) while performing detail, as this can discharge the battery."
• "WARNING: Only operate power convertible top with engine running to conserve battery power (A5/S5 Cab, R8 Spyder, TT Roadster ONLY)"
• "WARNING: DO NOT allow convertible top to remain in a partially opened or partially closed position for longer than 5 minutes. This will cause the top to stop functioning and will require service (A5/S5 Cab, R8 Spyder, TT Roadster ONLY)"
• "WARNING: DO NOT treat vehicle parts painted with matte finish paint with conventional polishing materials or hard wax. Specific matte paint care products can be found in the Touch Up Paint and Service Supplies eStore in Access Audi. Use of conventional polishes and waxes can destroy the matte finish effect."
• "WARNING: DO NOT TOUCH ORANGE HIGH VOLTAGE WIRES (Q5 TFSI e A7 TFSI e, A8 TFSI e, e-tron vehicles only)"
• "WARNING! Do not remove airbag warning triangle/warning labels"
• "IMPORTANT: DO NOT use dressings or chemicals containing silicone!"

Pre-Delivery Inspection Overview

The Audi Vehicle Detail Report details a comprehensive checklist for preparing 2022 Audi vehicles for delivery. This ensures every aspect of the vehicle, from its appearance to its functionality, is thoroughly checked.

Exterior Preparation

Technicians must remove protective coverings, wash and dry the vehicle exterior (including door jambs and trunk), and inspect painted surfaces, molding, and glass for any residue or damage. Specific instructions include applying 3M™ Premium Liquid Wax or 3M™ Perfect-It™ Show Car Paste Wax (excluding matte finish paint) and cleaning the windshield with 3M™ Glass Polishing Compound. Tire pressure must also be set to Normal Load Condition, referencing SERVICENET for specific tables.

Interior Preparation

Interior checks involve cleaning all glass, sunroofs, and mirrors. All trim protection, coverings, stickers, and decals must be removed, with a specific warning not to remove airbag warning triangle/warning labels. Upholstery, seat tracks, and all interior surfaces must be inspected and cleaned for marks or fingerprints. The luggage compartment should be vacuumed, and front/rear floor mats installed and checked for color match.

Under Hood Checks

Under the hood, technicians must wipe down the area and remove excess water from the grille and hood. A critical warning for the Audi e-tron pre-delivery inspection and other specific models (Q5 TFSI e, A7 TFSI e, A8 TFSI e) is "DO NOT TOUCH ORANGE HIGH VOLTAGE WIRES." Additionally, it's important not to use dressings or chemicals containing silicone in this area.

Final Quality Inspection

A final re-inspection of the vehicle is required to check for surface scratches, swirl marks, paint chips, dents, wax residue, dust, or lint. This inspection should ideally be performed in the delivery area or under fluorescent lights/bright sunlight in the shop. Any detected damage must be repaired before the vehicle is delivered to the customer.

Detailing Product References

The report references specific Audi Technical Service Bulletins (TSBs) for detailing procedures. TSB 2009967 provides guidelines for detailer responsibilities, specific chemical usage, and part numbers for ordering materials. For cleaning the front and rear windshields, TSB 2020552 offers detailed instructions on using 3M™ Glass Polishing Compound. These TSBs ensure that the correct products and methods are used, especially during the Audi e-tron pre-delivery inspection, to maintain the vehicle's finish and components.

---

NHTSA ID: 10189523