Chrysler (FCA US, LLC) is recalling certain 2012-2021 RAM 3500, 3500 Cab Chassis, 4500 Cab Chassis, and 5500 Cab Chassis vehicles. Incorrect information in the Service and Owner's Manuals may cause the flanged lug nuts to be over-tightened, which could result in a broken wheel stud and possible wheel separation.
Chrysler (FCA US LLC) is recalling certain 2015-2017 Ram 1500, 2500 and 3500 pickup trucks equipped with an 8 foot bed and a power locking tailgate. Chrysler is also recalling all 2013-2014 and 2018 Ram 1500, 2500 and 3500 pickup trucks built before April 1, 2018 with a 6 or 8 foot bed and a power locking tailgate. On August 29, 2019 Chrysler expanded the recall to include an additional 693,128 model year 2013-2014 Ram 1500, 2500 and 3500 pickup trucks. The tailgate actuator limiter tab may fracture and cause the tailgate to unlatch and open while driving.
Chrysler (FCA US LLC) is recalling certain 2013-2018 Ram 3500 and 2014-2018 Ram 3500 Chassis Cab and Ram 2500 vehicles. The outboard steering linkage jam nut may loosen, allowing one end of the drag link to separate.
Streetcar ORV LLC (Streetcar) is recalling certain American Expedition Vehicles (AEV) 3" Dualsport aftermarket suspension kits, part numbers N0436000 and N0436001, sold for installation on 2013-2018 RAM 2500 and 3500HD trucks. Improper installation and machining of the original equipment steering knuckle may weaken the joint between the steering drag link and knuckle.
Chrysler (FCA US LLC) is recalling various Dodge, Chrysler, and RAM vehicles equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers. A list of the affected trailer models is available at: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17V824-0103.pdf. These extinguishers may become clogged, preventing the extinguisher from discharging as expected or requiring excessive force to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf
The contact owns a 2013 Ram 3500. The contact stated that the vehicle became uncontrollable and was difficult to maneuver while driving on the road. The vehicle was taken to a local dealer, where the contact was informed that the part was to repair the vehicle was on back order. While driving approximately 45 MPH, the vehicle crashed into a ditch caused by a failure with the drag link. The contact stated that the shift interlock was fractured, causing the gear shifter to detach while the vehicle was driven. The vehicle became stuck in park(P). The vehicle was towed to a mechanic and was repaired with an aftermarket part. The contact stated that the dealer had not repaired the vehicle causing the failure. The customer care department was contacted but was unable to assist with the dealer. The contact was concerned that the aftermarket part might not meet the OE standards. The approximate failure mileage was 155,000.
The contact owns a 2013 Ram 3500. The contact stated that while attempting to sell the vehicle, the contact discovered there was a discrepancy in the mileage. The contact stated that the Carfax mileage was 47,029, and on March 10, 2015, the mileage was recorded at 49,873, and nine days later the mileage was recorded at 47,019.
No injuries · No fire · No crash
The contact owns a 2013 Ram 3500. The contact stated while driving 65-68 MPH over a bumpy road surface, the steering wheel and the front end of the vehicle shuddered significantly. The contact decelerated, exited the freeway, and pulled over to the shoulder of the road. The contact was able to continue driving. The vehicle was taken to the dealer, where the contact was informed that the vehicle had experienced the death wobble. The dealer diagnosed the vehicle and determined that the upper ball joints and control arms needed to be replaced. The dealer replaced the upper control arms. The vehicle was then taken to an independent mechanic, where the upper ball joints were replaced. The contact stated that the failure recurred several times while driving. The contact stated that the upper and lower ball joints, the control arms, the bushings, and other unknown parts were replaced several times; however, the failure persisted. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 100,000.
No injuries · No fire · No crash
I HAVE BEEN HAVING PROBLEMS WITH A RECALL ISSUED BY NHTSA. THE RECALL WAS V06 DRAG LINK. WHEN THE RECALL WA PREFORMED, THE ALIGNMENT NUTS ON THE DRAG LINK WERE WELDED SO THE COULDN'T COME LOOSE. I'VE HAD TO HAVE MY TRUCK REALIGNED 2 TIMES SINCE THE DRAG LINK NUTS WERE WELDED. AS OF RIGHT NOW THE NUTS ARE NOT WELDED AND THE INTEGRITY OF THE DRAG LINK IS COMPROMISED. I'VE HAD IT INTO 3 DIFFERENT INDEPENDENT REPAIR SHOPS AND EACH SAY THAT WELDING THE NUTS SHOULD ONLY BE A TEMPORARY FIX NOT A PERMANENT FIX. SINCE THE WELDING, I'VE HAD STEERING ISSUES WITH MY TRUCK WHICH IS WHY I'VE HAD IT IN THE REAPIR SHOPS. I FEEL THAT THE DRAG LINK NEEDS A TOTAL REPLACEMENT AND NOT A BANDAID FIX. I'VE CONTACTED FCA 2 TIMES AND HAVE A CASE NUMBER, #[XXX]. THE CALLS MADE WERE ON OCT. 10 & OCT 24. I'VE ALSO CONTACTED THE THE RAM DEALERSHIP IN MY AREA WHERE I GET SERVICE DONE AND HAVE "0" RESPONSE FROM THEM. I WOULD LIKE TO KNOW WHAT I CAN DO TO GET THIS ISSUE RESOLVED. THE WELDING OF A STEERING COMPONENT (DRAG LINK) IS NOT A FIX. I HAVE HAD STEERING ISSUES AND DEATH WOBBLE OCCUR SINCE THIS RECALL WAS COMPLETED. I'VE HAD IT IN FOR 2 ALIGNMENTS. I'M WORRIED FOR THE SAFETY OF MY FAMILY NOT HAVING THIS ISSUE TAKEN CARE OF. PLEASE ADVISE ON MY NEXT STEPS THANKS FOR YOUR ATTENTION. RECALL - V06 NHTSA 19V-021 INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
No injuries · No fire · No crash
When having to brake hard, the lining of the pressure line from the pump to the hydro booster comes apart and causes the brakes to not work and the power steering to act up. The plastic lining shoots into the booster causing it to fail. They don’t make a replacement line so I was forced to fabricate one. Very expensive fix.
No injuries · No fire · No crash