Ram 1500 Service Bulletins
3,710 manufacturer communications on file.
- December 23, 2014•Document ID: 10139921Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 08-079-14 REV. C
- Date Added:
- June 11, 2018
- Manufacturer:
- RAM
SummaryRA3 RA4 Radio Enhancements This bulletin involves inspecting and, if required, updating the radio software. A small number of customers may experience one or more of the following: Low battery condition due to the radio remaining powered up after the ignition has been turned off (U.S Markets Only) The Radio may switch from SiriusXM to an AM station by itself Uconnect registration always present, can not remove Uconnect account Teleprompter does not appear when pressing the Voice Recognition (VR) button VR operation cancels while in media mode Radio may display previous cameras image before displaying the current image Navigation lost vehicle position, during route calculation Navigation displays are missing after vehicle heading changes Navigation giving incorrect guidance to exit the highway FM audio may switch to AM after ignition cycle Text messages appear as sender?s phone number not their name. VR phone button may not work at times Audio muted after AUX device is disconnected VR, ? Listen? to text, will only play 1st message Drive Mode: Eco, sport or normal setting may not be saved after key cycle (LA, LD, LX and ZD Only). Drive Mode: Shift light On/Off, out of sync (LA, LD, LX and ZD Only) SirusXM station information does not update. Speed adjusted volume, may not work AM or FM seek or tuner soft keys may be missing Display screen show ambient temperature as ?- - ? not normal values.Improvements: High Definition (HD) radio buffering. Spanish translation. Radio station, scroll feature. Drive Mode: Launch control button, text improvements (LA, LD, LX and ZD Only). Making assist calls. App functionality and screen displays. Displays correct media, song titles and tracks. Travel Link, Points Of Interest (POI), displaying movies and favorites. Incoming calls, audio enhancements (LA, LD and LX Only). Audio for strong AM stations. VR performance. Settings can only be changed in run mode, not ACC.
Associated Products (11)Associated Documents - December 23, 2014•Document ID: 10062744Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 08-079-14REV.C
- Date Added:
- April 26, 2016
- Manufacturer:
- JEEP
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (10)Associated Documents - December 20, 2014•Document ID: 10229918Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE; ELECTRICAL SYSTEM; POWER TRAIN
- Mfr Comm. #:
- 1807714
- Date Added:
- January 17, 2023
- Manufacturer:
- RAM
SummaryFlash: 3.6L Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find one of the following Diagnostic Trouble Code has been set: P0607 - ECU Internal Performance P2096 - Downstream Fuel Trim System 1 Lean. P2097 - Downstream Fuel Trim System 1 Rich. P2098 - Downstream Fuel Trim System 2 Lean. P2099 - Downstream Fuel Trim System 2 Rich. Scan tool improved accuracy on mode 6, cylinder imbalance.
Associated Products (1)Associated Documents - December 20, 2014•Document ID: 10221087Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EXTERIOR LIGHTING
- Mfr Comm. #:
- 1807714
- Date Added:
- September 26, 2022
- Manufacturer:
- RAM
SummaryFlash: 3.6L Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find one of the following Diagnostic Trouble Code has been set: P0607 - ECU Internal Performance P2096 - Downstream Fuel Trim System 1 Lean. P2097 - Downstream Fuel Trim System 1 Rich. P2098 - Downstream Fuel Trim System 2 Lean. P2099 - Downstream Fuel Trim System 2 Rich. Scan tool improved accuracy on mode 6, cylinder imbalance.
Associated Products (1)Associated Documents - December 20, 2014•Document ID: 10139917Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 18-077-14
- Date Added:
- June 11, 2018
- Manufacturer:
- RAM
SummaryFlash: 3.6L Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find one of the following Diagnostic Trouble Code has been set: P0607 - ECU Internal Performance P2096 - Downstream Fuel Trim System 1 Lean. P2097 - Downstream Fuel Trim System 1 Rich. P2098 - Downstream Fuel Trim System 2 Lean. P2099 - Downstream Fuel Trim System 2 Rich. Scan tool improved accuracy on mode 6, cylinder imbalance.
Associated Products (1)Associated Documents - December 20, 2014•Document ID: 10068581Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 18-077-14
- Date Added:
- June 2, 2016
- Manufacturer:
- RAM
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (1)Associated Documents - December 20, 2014•Document ID: 10066257Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 18-077-14
- Date Added:
- May 19, 2016
- Manufacturer:
- RAM
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (1)Associated Documents - December 19, 2014•Document ID: 10229916Service Bulletin/Repair InstructionsPOWER TRAIN; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 1807314
- Date Added:
- January 17, 2023
- Manufacturer:
- RAM
SummaryFlash: 3.0L Powertrain Diagnostic And System Enhancements EGR System And AC Compressor Relay Operation This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software.
Associated Products (1)Associated Documents - December 19, 2014•Document ID: 10221085Service Bulletin/Repair InstructionsEXTERIOR LIGHTING; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 1807314
- Date Added:
- September 26, 2022
- Manufacturer:
- RAM
SummaryFlash: 3.0L Powertrain Diagnostic And System Enhancements EGR System And AC Compressor Relay Operation This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. The following powertrain system improvements/enhancements are included in this software release. ? Enhancements to improve A/C compressor relay duty cycle operation to prevent ignition off battery draw. ? Powertrain system improvements to enable EGR cleaning routine. ? Software to eliminate Malfunction Indicator Lamp (MIL) Illumination with no defect found for Diagnostic Trouble Code (DTC) P016A-00 - Excessive Time To Enter Closed Loop Air/Fuel Ratio Control.
Associated Products (1)Associated Documents - December 19, 2014•Document ID: 10139915Service Bulletin/Repair InstructionsPOWER TRAIN; EQUIPMENT:APPLIANCE:AIR CONDITIONER
- Mfr Comm. #:
- 18-073-14
- Date Added:
- June 11, 2018
- Manufacturer:
- RAM
SummaryFlash: 3.0L Powertrain Diagnostic And System Enhancements EGR System And AC compressor Relay Operation This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. The following powertrain system improvements/enhancements are included in this software release. * Enhancements to improve A/C compressor relay duty cycle operation to prevent ignition off battery draw. * Powertrain system improvements to enable EGR cleaning routine. * Software to eliminate Malfunction Indicator Lamp (MIL) Illumination with no defect found for Diagnostic Trouble Code (DTC) P016A-00 - Excessive Time To Enter Closed Loop Air/Fuel Ratio Control.
Associated Products (1)Associated Documents - December 19, 2014•Document ID: 10068578Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 18-073-14
- Date Added:
- June 2, 2016
- Manufacturer:
- RAM
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (1)Associated Documents - December 19, 2014•Document ID: 10066254Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 18-073-14
- Date Added:
- May 19, 2016
- Manufacturer:
- RAM
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (1)Associated Documents - December 18, 2014•Document ID: 10229911Service Bulletin/Repair InstructionsPOWER TRAIN; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 1802814
- Date Added:
- January 17, 2023
- Manufacturer:
- RAM
SummaryFlash: MIL Illumination - Diagnostic and System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. It also involves replacement of the Oxygen (O2) Sensor and cleaning or replacement of the Exhaust Gas Temperature (EGT) Sensor 1/2 if necessary depending on Diagnostic Trouble Codes (DTC) that may have set. A small number of customers may experience an intermittent engine shudder or vibration which may not set a Diagnostic Trouble Code (DTC). In addition other customers may experience a High.
Associated Products (1)Associated Documents - December 18, 2014•Document ID: 10221080Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE; SERVICE BRAKES, HYDRAULIC; EXTERIOR LIGHTING; SUSPENSION; ELECTRICAL SYSTEM; BACK OVER PREVENTION; FUEL SYSTEM, DIESEL
- Mfr Comm. #:
- 1802814REVD
- Date Added:
- September 26, 2022
- Manufacturer:
- RAM
SummaryFlash: MIL Illumination - Diagnostic and System Improvements Bulletin involves reprogramming the Powertrain Control Module (PCM) with latest available software. It also involves replacement of the Oxygen (O2) Sensor and cleaning or replacement of Exhaust Gas Temperature (EGT) Sensor 1/2 if necessary, depending on Diagnostic Trouble Codes (DTC) that may have set. A small number of customers may experience an intermittent engine shudder or vibration which may not set a Diagnostic Trouble Code (DTC) other customers may experience a Malfunction Indicator Lamp (MIL) illumination upon which technician may find one or more of following DTCs have been set: P016A-00 - Excessive Time To Enter Closed Loop Air/Fuel Ratio Control. P2459-00 - Diesel Particulate Filter Regeneration Frequency. P0133-00 - O2 Sensor 1/1 Slow Response. P2084-00 - Exhaust Gas Temperature Sensor Circuit Performance - (1/2). P0171-00 - Fuel System 1/1 Lean. P0426-00 - Catalyst Temperature Sensor Circuit Performance (1/1). P0045-00 - Turbocharger Boost Control Circuit/Open. P0087-00 - Fuel Rail Pressure Too Low. P009A-00 - Intake Air Temperature/Ambient Air Temperature Correlation. P0128-00 - Thermostat Rationality. P0234-00 - Turbocharger Overboost Condition. P0420-00 - Catalyst Efficiency (Bank 1). P05F8-00 - Reductant Heater Control Module Performance. P050E-00 - Cold Start Engine Exhaust Temperature Too Low. P200A-00 - Intake Manifold Runner Performance - (Bank 1). P200B-00 - Intake Manifold Runner Performance - (Bank 2). P202E-00 - Reductant Injection Valve Circuit Performance. P204F-00 - Reductant System Performance. P2080-00 - Exhaust Gas Temperature Sensor Circuit Performance. P20BA-00 - Reductant Heater 1 Control Circuit Performance. P20BE-00 - Reductant Pressure Line Heater Control Circuit Performance. P20C2-00 - Reductant Heater 3 Control Circuit Performance. P20E9-00 - Reductant Pressure Too High. P225C-00 - NOX Sensor 1/1 Performance - Signal Stuck High.
Associated Products (1)Associated Documents - December 18, 2014•Document ID: 10139910Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 18-028-14 REV. D
- Date Added:
- June 11, 2018
- Manufacturer:
- RAM
SummaryFlash: MIL Illumination - Diagnostic and System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. It also involves replacement of the Oxygen (O2) Sensor and cleaning or replacement of the Exhaust Gas Temperature (EGT) Sensor 1/2 if necessary depending on Diagnostic Trouble Codes (DTC) that may have set. A small number of customers may experience an intermittent engine shudder or vibration which may not set a Diagnostic Trouble Code (DTC). In addition other customers may experience a Malfunction Indicator Lamp (MIL) illumination upon which the technician may find one or more of the following DTCs have been set: P016A-00 - Excessive Time To Enter Closed Loop Air/Fuel Ratio Control. P2459-00 - Diesel Particulate Filter Regeneration Frequency P0133-00 - O2 Sensor 1/1 Slow Response P2084-00 - Exhaust Gas Temperature Sensor Circuit Performance - (1/2) P0171-00 - Fuel System 1/1 Lean P0426-00 - Catalyst Temperature Sensor Circuit Performance (1/1) P0045-00 - Turbocharger Boost Control Circuit/Open P0087-00 - Fuel Rail Pressure Too Low P009A-00 - Intake Air Temperature/Ambient Air Temperature Correlation P0128-00 - Thermostat Rationality P0234-00 - Turbocharger Overboost Condition P0420-00 - Catalyst Efficiency (Bank 1) P05F8-00 - Reductant Heater Control Module Performance P050E-00 - Cold Start Engine Exhaust Temperature Too Low P200A-00 - Intake Manifold Runner Performance - (Bank 1) P200B-00 - Intake Manifold Runner Performance - (Bank 2) P202E-00 - Reductant Injection Valve Circuit Performance P204F-00 - Reductant System Performance P2080-00 - Exhaust Gas Temperature Sensor Circuit Performance P20BA-00 - Reductant Heater 1 Control Circuit Performance P20BE-00 - Reductant Pressure Line Heater Control Circuit Performance P20C2-00 - Reductant Heater 3 Control Circuit Performance P20E9-00 - Reductant Pressure Too High P225C-00 - NOX Sensor 1/1 Performance - Signal Stuck High
Associated Products (1)Associated Documents - December 18, 2014•Document ID: 10063306Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- 18-028-14REV.D
- Date Added:
- April 26, 2016
- Manufacturer:
- RAM
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (1)Associated Documents - December 9, 2014•Document ID: 10229890Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- 0810814
- Date Added:
- January 17, 2023
- Manufacturer:
- RAM
SummaryRA2 Radio Software Enhancements This bulletin involves updating the radio's software. A customer may have experience one or more of the following: Not able to change state of heated seats and/or steering wheel during stop event on Stop/Start vehicles. Touchscreen confirmation beep may be too loud (Grand Cherokee only). U0208-00 - Loss Communication With Heated Seat Control Module (Cherokee only).Improvements: Only allow vehicle settings to be changed in run mode. To help insure settings are properly saved. Always gray out text message soft keys for non-supporting devices. Voice Recognition (VR) improved accuracy.
Associated Products (7)Associated Documents - December 9, 2014•Document ID: 10229888Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- 0810914
- Date Added:
- January 17, 2023
- Manufacturer:
- RAM
SummaryRG2 Or RJ2 Radio Software Enhancements This bulletin involves updating the radio's software. A customer may have experience one or more of the following: Not able to change state of heated seats and/or steering wheel during stop event on Stop/Start vehicles. Touchscreen confirmation beep may be too loud. The radio does not allow selection of the Polish language. The radio fan continually runs at high speed. Customer perception may be the radio fan is too loud.Improvements: Only allow vehicle settings to be changed in run mode. To help insure settings are properly saved. Always gray out text message soft keys for non-supporting devices. Voice Recognition (VR) improved accuracy.
Associated Products (7)Associated Documents - December 9, 2014•Document ID: 10229887Service Bulletin/Repair InstructionsPOWER TRAIN; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 1802514
- Date Added:
- January 17, 2023
- Manufacturer:
- RAM
SummaryFlash: Powertrain System Improvements/Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. The following powertrain system improvements/enhancements are included in this software release. These enhancements are listed by vehicle application.DS vehicles equipped with a 3.6L engine (sales code ERB). Enhanced Automatic Oil Change Indicator(EAOCI) system improvements to switch to a severe duty cycle algorithm anytime the PCM is replaced to ensure the customer receives a timely oil change required message. Corrected a generic scan tool display issue regarding Mode 6 data accuracy.DS vehicles equipped with a 5.7L engine (sales code EZH). Charging system voltage regulator control improvements. System improvements to prevent Malfunction Indicator Lamp (MIL) illumination with a Diagnostic Trouble Code (DTC) P0300 - Multiple Cylinder Misfire when using a block heater in ambient temperatures greater than -20°F (-29°C). Enhanced Automatic Oil Change Indicator(EAOCI) system improvements to switch to a severe duty cycle algorithm anytime the PCM is replaced to ensure the customer receives a timely oil change required message. Corrected a generic scan tool display issue regarding Mode 6 data accuracy.DJ, DD, and D2 vehicles equipped with a 5.7L engine (sales code EZC) Transmission torque management enhancement when shifting from drive to reverse.
Associated Products (3)Associated Documents - December 9, 2014•Document ID: 10229886Service Bulletin/Repair InstructionsPOWER TRAIN; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 1805014
- Date Added:
- January 17, 2023
- Manufacturer:
- RAM
SummaryFlash: Drone or Vibration Present During MDS Operation This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. New PCM software is being released to address a customer?s concern of a drone or vibration type condition while driving at highway speeds during MDS (Multiple Displacement System) operation.In addition, the following powertrain system improvements/enhancements are also included in this software release: Improved Electronic Voltage Regulator control to more precisely maintain system voltage. Enhanced Automatic Oil Change Indicator(EAOCI) system improvements to switch to a severe duty cycle algorithm anytime the PCM is replaced to ensure the customer receives a timely oil change required message. (Only applies to vehicles using a block heater in ambient temperatures greater than -20°F(-29°C)).
Associated Products (4)Associated Documents