Ram 1500 Service Bulletins
2,018 manufacturer communications on file.
- August 19, 2026•Document ID: 11036359Service Bulletin/Repair InstructionsENGINE; POWER TRAIN
- Mfr Comm. #:
- 18-077-26
- Date Added:
- August 26, 2026
- Manufacturer:
- RAM
SummaryFlash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): ● P0300 - Multiple Cylinder Misfire. Customers may experience one of the following: ● Vehicle runs rough on initial cold start only after an overnight or extended soak. **This bulletin involves reprogramming the PCM with the latest available software.**
Associated Products (1)Associated Documents - August 18, 2026•Document ID: 11036368Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 9100861 Rev 4
- Date Added:
- August 26, 2026
- Manufacturer:
- JEEP
SummaryPUMP, Auxiliary Coolant, High Temperature Before replacing the High Temperature Auxiliary Coolant Pump, please perform the following steps: 1) Key ON/OFF and let the after-run pump run for at least 20 minutes before moving on to step #2. 2) Inspect the pump connector area for presence of water. 3) Inspect the pump connector for corrosion. 4) Inspect the pump for coolant contamination as this can cause the pump to stall. 5) Inspect battery terminals for damage to rule out a battery drainage issue. 6) Ensure the PCM is up-to-date with the latest available flash.
Associated Products (12)Associated Documents - August 18, 2026•Document ID: 11036364Service Bulletin/Repair InstructionsSTRUCTURE:BODY; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 113855
- Date Added:
- August 26, 2026
- Manufacturer:
- RAM
SummarySWITCH AND BEZEL - FRONT DOOR
Associated Products (10)Associated Documents - August 18, 2026•Document ID: 11036363Service Bulletin/Repair InstructionsSTRUCTURE:BODY; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 113854
- Date Added:
- August 26, 2026
- Manufacturer:
- RAM
SummarySWITCH AND BEZEL - FRONT DOOR
Associated Products (10)Associated Documents - August 17, 2026•Document ID: 11036362Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 114072
- Date Added:
- August 26, 2026
- Manufacturer:
- JEEP
SummaryMOTOR - WINDOW REGULATOR
Associated Products (15)Associated Documents - August 17, 2026•Document ID: 11036361Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 114073
- Date Added:
- August 26, 2026
- Manufacturer:
- JEEP
SummaryMOTOR - WINDOW REGULATOR
Associated Products (15)Associated Documents - August 15, 2026•Document ID: 11036269Service Bulletin/Repair InstructionsSTRUCTURE:BODY; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-313-26 REV. A
- Date Added:
- August 19, 2026
- Manufacturer:
- JEEP
SummaryFront Windows Auto-Reverse During Closing Customers may experience the following: SYMPTOM: ● Front windows travel to the closed position but then auto-reverses. This bulletin involves inspecting the date codes on both front power window regulator motors and, if necessary, replacing one or both power window regulator motors
Associated Products (2)Associated Documents - August 14, 2026•Document ID: 11036267Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- 05-003-26
- Date Added:
- August 19, 2026
- Manufacturer:
- RAM
SummaryBrake Fluid Leak At The Brake System Control Module 2 (BSCM2) The customer may comment the following: SYMPTOM: ● Drops of brake fluid are on the ground. This bulletin involves tightening two BSCM2 brake line fittings.
Associated Products (1)Associated Documents - August 13, 2026•Document ID: 11036268Service Bulletin/Repair InstructionsSTRUCTURE:BODY; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-313-26
- Date Added:
- August 19, 2026
- Manufacturer:
- JEEP
SummaryFront Windows Auto-Reverse During Closing Customers may experience the following: SYMPTOM: ● Front windows travel to the closed position but then auto-reverses. This bulletin involves inspecting the date codes on both front power window regulator motors and, if necessary, replacing one or both power window regulator motors
Associated Products (2)Associated Documents - August 7, 2026•Document ID: 11036177Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 9100879
- Date Added:
- August 13, 2026
- Manufacturer:
- RAM
SummaryFront Passenger Display Module Verify "Z" part number availability. Order a "Z" part number for all Exchange Orders, Warranty, Mopar, Customer Pay and Service Contract. Order "68" part number for New, Unsold units only.
Associated Products (10)Associated Documents - August 6, 2026•Document ID: 11036154Service Bulletin/Repair InstructionsPOWER TRAIN; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-308-26
- Date Added:
- August 13, 2026
- Manufacturer:
- RAM
SummaryFlash: Electronic Shift Module (ESM) Updates Customers may comment on one or more of the following: SYMPTOM: ● Shifter is unresponsive. ● Unable to start the vehicle. ● “Service Shifter” message displayed in the Instrument Panel Cluster (IPC). This bulletin involves inspecting and possibly reprogramming the ESM with the latest available software.
Associated Products (1)Associated Documents - August 1, 2026•Document ID: 11035978Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; SERVICE BRAKES
- Mfr Comm. #:
- 08-305-26
- Date Added:
- August 6, 2026
- Manufacturer:
- RAM
SummaryFlash: Brake System Control Module (BSCM) Updates **Customers may experience one or more of the following: SYMPTOM: ● Warning message "Selec-Speed Unavailable" appears in the Instrument Panel Cluster (IPC) when trying to enable the Selec-Speed Control (SSC) function. NOTE: There will be no Diagnostic Trouble Codes (DTCs) and no driveability concerns with this symptom.** ● Anti-Lock Brake System (ABS), Electronic Stability Control (ESC) and 'Decel ACC' lights on in the IPC. Technicians may also find the following: ● DTC C121A-00 - Steering Angle Sensor Not Initialized - Is stored with no Malfunction Indicator Lamp (MIL). This bulletin involves reprogramming the BSCM with the latest available software.
Associated Products (1)Associated Documents - July 30, 2026•Document ID: 11035995Service Bulletin/Repair InstructionsAIR BAGS
- Mfr Comm. #:
- 9100867
- Date Added:
- August 6, 2026
- Manufacturer:
- RAM
SummaryMODULE Air Bag Control Please ensure vehicle voltage is within specified limits. Most faults will store after an ignition cycle if the vehicle voltage is within specified limits. Check TERMINAL RETENTION ON CONNECTOR C1 PIN 11, CIRCUT D 282 CAN FD+_2 and repair any loose connection. For Loss OF Communication faults, please follow the diagnostic service routine in Service Library and confirm these steps before ORC replacement. Reference Service Library Section 28 - DTC-Based Diagnostics / MODULE, Body Control (BCM) / Diagnosis and Testing / U0151-00-LOST COMMUNICATION WITH RESTRAINTS CONTROL MODULE. The Standard Procedure / COMMUNICATION DIAGNOSTIC PROCEDURE must be performed before replacing any component(s) or module(s). AT A MINIMUM THESE PROCEEDURES MUST BE CHECKED: 1). (Refer to 28 - DTC-Based Diagnostics/MODULE, Body Control (BCM) / Standard Procedure). 2). COMMUNICATIONS DIAGNOSTIC PROCEDURE - LOSS OF COMMUNICATION DIAGNOSTIC PROCEDURE If the vehicle has ORC fault B2207 - Occupant Restraint Controller Internal 1 either active or stored, please check for 3rd party (non-Mopar) installed "Pulse" unit at the CHMSL & Cargo Lamp wires. Please take the Service action to check & remove Pulse unit (or other 3rd party brands) spliced in circuit# L56, L14, L51, and/or ground Z946 for the Center High Mounted Stop Lamp (CHMSL) and Cargo Lamps. Please correct the wiring to original OEM standard and replace the ORC module. Please document the "Pulse" unit (and/or other device names for the same function) in the service repair history. The "Pulse" unit (or other brand names) is a 3rd party, non-MOPAR circuit that when spliced into the CHIMSL circuit, can make the CHIMSL blink 3 times before becoming solid on upon activation of the brake switch. Please do not submit warranty claim when the Internal-1 DTC is confirmed to be caused by the "Pulse" or similar unit.
Associated Products (2)Associated Documents - July 28, 2026•Document ID: 11035994Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- 9100861 Rev 3
- Date Added:
- August 6, 2026
- Manufacturer:
- JEEP
SummaryPUMP, Auxiliary Coolant Before replacing the Auxiliary Coolant Pump, please perform the following steps: 1) Key ON/OFF and let the after-run pump run for at least 20 minutes before moving on to step #2. 2) Inspect the pump connector area for presence of water. 3) Inspect the pump connector for corrosion. 4) Inspect the pump for coolant contamination as this can cause the pump to stall. 5) Inspect battery terminals for damage to rule out a battery drainage issue. 6) Ensure the PCM is up-to-date with the latest available flash. If correct repair is not performed then the claim or condition will be recovered by Warranty Operations.
Associated Products (12)Associated Documents - July 28, 2026•Document ID: 11035992Service Bulletin/Repair InstructionsLANE DEPARTURE: BLIND SPOT DETECTION
- Mfr Comm. #:
- 9100274 Rev 1
- Date Added:
- August 6, 2026
- Manufacturer:
- RAM
SummaryBlindspot Module For concern on Blindspot Module setting U11FB-00 Lost Communication with Left Blind Spot Sensor, U11FA-00 Lost Communication with Right Blind Spot Sensor. Some vehicle(s) where the Blindspot Module was replaced had no issues found with the Blindspot Module after testing. Please verify no wiring or connector issues are present prior to module replacement.
Associated Products (4)Associated Documents - July 24, 2026•Document ID: 11035325Service Bulletin/Repair InstructionsENGINE; POWER TRAIN
- Mfr Comm. #:
- 18-075-26
- Date Added:
- July 29, 2026
- Manufacturer:
- RAM
SummaryFlash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P0111-00 - Intake Air Temperature Sensor 1 Circuit Performance (In Active or Stored status) ● P0071-00 - Ambient Air Temperature Sensor Performance (In Active or Stored status) ● P0073-00 - Ambient Air Temperature Sensor Circuit "A" High (In Active or Stored status) ● P062B-00 - Internal Control Module Fuel Injector Control Performance ● P0E7E-00 - Coolant Bypass Valve B Control Circuit (In Active or Stored status)** ● P2AF6-00 - Starter Relay 3 Stuck Off (with PCR). ● P00FD - Battery B State Of Charge Performance. ● P013F-00 - O2 Sensor 2/1 Delayed Response - Lean To Rich Bank. (In Active or Stored status) ● P014A-00 - O2 Sensor 2/2 Delayed Response - Rich to Lean Bank. (In Active or Stored status) ● P013E-00 - O2 Sensor 2/1 Delayed Response - Rich to Lean Bank. (In Active or Stored status) ● P014B-00 - O2 Sensor 2/2 Delayed Response - Lean To Rich Bank. (In Active or Stored status) ● P06DD-00 - Engine Oil Pressure Control Circuit Performance/Stuck Off.(In Active or Stored status) ● P0073-00 - Ambient Air Temperature Sensor Circuit "A" High. (In Active or Stored status) ● P0071-00 - Ambient Air Temperature Sensor Performance. (In Active or Stored status) ● P2C90-00 - Crankcase Ventilation System - Hose "A" Disconnected. (In Active or Stored status) ● P1CEA-00 - Boost Side EVAP Purge System Performance. (In Active or Stored status) ● P05BD-00 - Stop-Start Mode Switch Range/Performance. (In Active or Stored status) ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking. (In Active or Storedstatus) ● U0673-00 - Lost Communication With Ion Sense Module.(In Active or Stored status) Customers may also comment on one or more of the following: ● **High Elevation misfire. ● Electronic Start Stop (ESS) inoperative. This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.
Associated Products (1)Associated Documents - July 24, 2026•Document ID: 11035311Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-280-26 REV. A
- Date Added:
- July 29, 2026
- Manufacturer:
- RAM
SummaryFlash: Integrated Trailer Control Module (ITCM) Update Customers may experience the following: SYMPTOM: ● 'Check Trailer Turn Lamp' message in the Instrument Panel Cluster (IPC) with no trailer connected. This bulletin involves inspecting and possibly reprogramming the ITCM with the latest software.
Associated Products (1)Associated Documents - July 23, 2026•Document ID: 11035336Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 113672
- Date Added:
- July 29, 2026
- Manufacturer:
- RAM
SummaryGEAR KIT - RING AND PINION
Associated Products (2)Associated Documents - July 22, 2026•Document ID: 11035322Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- 18-072-26
- Date Added:
- July 29, 2026
- Manufacturer:
- RAM
SummaryGMET6 SO MIL Changes At Elevation Above 1,000 FT Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0300-00 - Multiple Cylinder Misfire. ● P0301-00 - Cylinder 1 Misfire. ● P0302-00 - Cylinder 2 Misfire. ● P0303-00 - Cylinder 3 Misfire. ● P0304-00 - Cylinder 4 Misfire. ● P0305-00 - Cylinder 5 Misfire. ● P0306-00 - Cylinder 6 Misfire. Customers may experience the following: ● Engine missing or running rough.
Associated Products (1)Associated Documents - July 22, 2026•Document ID: 11035321Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- 18-071-26
- Date Added:
- July 29, 2026
- Manufacturer:
- RAM
SummaryFlash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **U0104-00 - Lost Communication With Cruise Control Module (NA Market Only) (In Active or Stored status). ● U0405-00 - Invalid Data Received From Cruise Control Module (NA Market Only) (In Active or Stored status). NOTE: Vehicles setting DTCs U0405-00 and U0104-00 may experience an inability to be cleared.** ● P06DD-00 - Engine Oil Pressure Control Circuit Performance/Stuck Off. ● P0073-00 - Ambient Air Temperature Sensor Circuit "A" High. ● P0071-00 - Ambient Air Temperature Sensor Performance. ● P2C90-00 - Crankcase Ventilation System - Hose "A" Disconnected. ● P1CEA-00 - Boost Side EVAP Purge System Performance. ● P05BD-00 - Stop-start Mode Switch Range/Performance. ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking. ● U0673-00 - Lost Communication With Ion Sense Module. ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking - in ACTIVE or STORED status. ● P0325-00 - Knock/Combustion Vibration Sensor 1 Circuit - in ACTIVE or STORED status. ● P0330-00 - Knock/Combustion Vibration Sensor 2 Circuit - in ACTIVE or STORED status. ● P032A-00 - Knock-Combustion Vibration Sensor C Circuit - in ACTIVE or STORED status. ● P018B-00 - Fuel Pressure Sensor "B" Circuit Range/Performance - in ACTIVE or STORED status. ● P2AF6-00 - Starter Relay 3 Stuck Off - in ACTIVE or STORED status. ● P0300-00 - Multiple Cylinder Misfire - in ACTIVE or STORED status set during cold start catalyst heating. ● P0301-00 - Cylinder 1 Misfire - in ACTIVE or STORED status set during cold start catalyst heating. ● P0302-00 - Cylinder 2 Misfire - in ACTIVE or STORED status set during cold start catalyst heating. ● P0303-00 - Cylinder 3 Misfire - in ACTIVE or STORED status set during cold start catalyst heating. This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.
Associated Products (1)Associated Documents