Jeep · Model Report
Showing safety data for the 2006 model year only.
Chrysler (FCA US LLC) is recalling certain model year 2006 Dodge Viper and Jeep Wrangler and Liberty vehicles manufactured July 1, 2005, to July 31, 2006. In the affected vehicles, the springs within the clutch pedal position switch that prevents the vehicle from starting unless the clutch pedal is pushed down may break. As a result, the vehicle may not be started when the clutch pedal is pushed down or the engine may crank and start without the clutch pedal being pushed down causing the vehicle to unexpectedly lurch.
ON CERTAIN SPORT UTILITY VEHICLES EQUIPPED WITH 6 SPEED MANUAL TRANSMISSIONS, THE HYDRAULIC CLUTCH MASTER CYLINDER LINKAGE ROD MAY BREAK. THIS MAY NOT ALLOW DISENGAGEMENT OF THE CLUTCH WHEN THE PEDAL IS DEPRESSED.
ON CERTAIN PICKUP TRUCKS, SPORT UTILITY AND PASSENGER VEHICLES EQUIPPED WITH 42RLE AUTOMATIC TRANSMISSIONS, THE CUP PLUG THAT RETAINS THE PARK PAWL ANCHOR SHAFT MAY BE IMPROPERLY INSTALLED. IF THE SHAFT MOVES OUT OF POSITION, THE VEHICLE MAY NOT BE ABLE TO ACHIEVE 'PARK' POSITION.
The ECU/PCU has developed a failure to control the idle air intake valve due to an unrepairable defect on the computer. IT can shut the engine down without warning while running, especially when approaching stops. IT requires the operator to try to control the issue using the accelerator pedal to override it and prevent the engine from cutting out. It can happen without warning, and de[pending on the skill level of the driver, an accident can easily result. PLUS there are NO repair parts for the ECU/PCU in the parts system, resulting in an unsafe and unmaintainable vehicle on the highways. The ECU /PCU was used one year only, so the Chrysler engineers knew they had a defect. No older Jeep used this particular unit and no younger ones used it either!
No injuries · No fire · No crash
Unrecalled, unreplaced TAKATA air bags. This particular Jeep has been operated in high temperature/high humidity conditions and which was known to the manufacturers to cause potentially fatal injuries to the driver and front seat passenger. The truck was built by Daimler Chrysler (2006), and neither they, nor the successor companies Fiat/Chrysler and Stellantis have made no efforts whatsoever to contact the owners (I am the original owner from day 1) to effect repair or replacement of the defective air bags and initiator units. The unit was extensively operated in the Paris , Texas area for 2-1/2 years in extremely high humidity/hot temperatures in normal service. They should be considered compromised by your own tests done in the 2006-2012 period.
No injuries · No fire · No crash
The frame of this vehicle has deteriorated to the point of becoming a safety hazard. The frame has rusted through over 50% of the thickness (internally) and has broken through to the outside in several areas around where the suspension and transmission attach. I recognize that this is an older vehicle, but it has larger percentage of rust than other vehicles I have owned and I do not believe it should be this deteriorated. I believe there must have been a manufacturing defect in the design (water/dirt) can get trapped in the frame or the material used was of insufficient corrosion resistance. Component Malfunction: Frame Structural Integrity Safety Risk: Drivetrain/Suspension could detach from vehicle causing safety risk to occupant of vehicle or nearby pedestrians/vehicles/structures. Inspected by dealership: Dealership did not mention it, probably because this is a 'known' issue that they don't have a fix for. (Frame replacement is expensive) Inspected by police: Indiana does not require inspections. (No) Warning Lamps: No. Symptoms appeared in 2020, seem to have accelerated over the last two years/5000 miles.
No injuries · No fire · No crash
The transmission has been shifting very hard and erratic for years and if i hit a bump the steering wheel shakes violently. Has been doing these things since almost new the dealer would not fix any of it.
No injuries · No fire · No crash
December 19th, 2022 Gentlemen/Ladies: This vehicle has been operated over five (5) of its sixteen (16) years in East and West Texas, in an extremely high heat and high humidity environment. It has been also in Central Illinois for about 9 years in a similar environment, and it is known to have the Takata air bag initiator units that are prone to an over 50% dangerous explosion failure rate when actuated. Given that this vehicle is soon to be exported to an equally high heat and humidity environment in service, may I ask why haven't you required Chrysler/Jeep to recall and repair the units in question? Given that there are no doubt several million Jeep Wranglers and Wrangler Unlimiteds with these Takata units in them, it is an unconscionable mistake to allow them to continue in daily service in an unrepaired or updated condition. When, not if these units fail, the results can result in serious injuries and deaths.
No injuries · No fire · No crash