Jeep Wagoneer S Service Bulletins
298 manufacturer communications on file.
- February 10, 2026•Document ID: 11029711OtherUNKNOWN OR OTHER
- Mfr Comm. #:
- HOT! 03D Recall
- Date Added:
- March 5, 2026
- Manufacturer:
- RAM
SummaryFrom: FCA REDACTED CONTENT Sent: Tuesday, February 10, 2026 11:29 AM Subject: HOT! 03D Recall - Launching Today - 2.10 Cleveland West / East Ohio! For your information, VINs live for the below recall went live today with remedy available. Please reach out with any questions! 03D - Certain 2025 and 2026 model year equipped with a trailer tow package. •(DT) Ram 1500 Pickup •(DJ) Ram 2500 Pickup •(D2) Ram 3500 Pickup •(DD) Ram 3500 Cab Chassis •(DP) Ram 4500/5500 Cab Chassis •2024 through 2026 model year (KM) Jeep Wagoneer S •2026 model year (KM) Jeep Cherokee vehicles NOTE: The recall units are NOT showing in VOIM properly right now – HQ is aware •VINs show properly on Service, VIN Inquiry, Configurator FCA REDACTED CONTENT
Associated Products (14)Associated Documents - February 9, 2026•Document ID: 11028886Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 110081
- Date Added:
- February 19, 2026
- Manufacturer:
- RAM
SummaryMODULE - TRAILER BRAKE & TOWING CONTROL
Associated Products (18)Associated Documents - February 6, 2026•Document ID: 11028785Service Bulletin/Repair InstructionsSERVICE BRAKES; ELECTRICAL SYSTEM
- Mfr Comm. #:
- 110082
- Date Added:
- February 12, 2026
- Manufacturer:
- RAM
SummaryMODULE - TRAILER BRAKE & TOWING CONTROL
Associated Products (18)Associated Documents - February 6, 2026•Document ID: 11028744Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; STRUCTURE:BODY
- Mfr Comm. #:
- S2308000120 REV.F
- Date Added:
- February 12, 2026
- Manufacturer:
- JEEP
SummaryRain Sensing Auto Wipers and Auto on Head Lamps Inoperative. Rain Sensor Internal Failure.
Associated Products (49)2026 Dodge Charger2026 Dodge Durango2026 Jeep Compass2026 Jeep Grand Cherokee2026 Jeep Grand Cherokee L2026 Jeep Grand Wagoneer2026 Jeep Wagoneer S2026 Ram 15002026 Ram 25002026 Ram 35002026 Ram 45002026 Ram 55002025 Dodge Charger2025 Dodge Durango2025 Jeep Compass2025 Jeep Grand Cherokee2025 Jeep Grand Cherokee L2025 Jeep Grand Wagoneer2025 Jeep Wagoneer2025 Jeep Wagoneer S+ 29 moreAssociated Documents - February 2, 2026•Document ID: 11028776Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 109287
- Date Added:
- February 12, 2026
- Manufacturer:
- JEEP
SummaryMOTOR - ELECTRIC
Associated Products (1)Associated Documents - February 2, 2026•Document ID: 11028775Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 109288
- Date Added:
- February 12, 2026
- Manufacturer:
- JEEP
SummaryMOTOR - ELECTRIC
Associated Products (3)Associated Documents - January 31, 2026•Document ID: 11028250Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- S2609000002
- Date Added:
- February 4, 2026
- Manufacturer:
- JEEP
SummaryEngine Oil Leak
Associated Products (1)Associated Documents - January 16, 2026•Document ID: 11027736Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- S2308000120 REV.E
- Date Added:
- January 21, 2026
- Manufacturer:
- JEEP
SummaryRain Sensing Auto Wipers and Auto on Head Lamps Inoperative. Rain Sensor Internal Failure.
Associated Products (49)2026 Dodge Charger2026 Dodge Durango2026 Jeep Compass2026 Jeep Grand Cherokee2026 Jeep Grand Cherokee L2026 Jeep Grand Wagoneer2026 Jeep Wagoneer S2026 Ram 15002026 Ram 25002026 Ram 35002026 Ram 45002026 Ram 55002025 Dodge Charger2025 Dodge Durango2025 Jeep Compass2025 Jeep Grand Cherokee2025 Jeep Grand Cherokee L2025 Jeep Grand Wagoneer2025 Jeep Wagoneer2025 Jeep Wagoneer S+ 29 moreAssociated Documents - January 14, 2026•Document ID: 11027723Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- 02-001-26
- Date Added:
- January 21, 2026
- Manufacturer:
- JEEP
SummaryFront Suspension RattleCustomers may experience the following: Customers may experience the following: ● Rattle noise in the front side of the vehicle.This bulletin involves reprogramming the TBM with the latest available software. This bulletin involves replacing the right front strut mounts and setting the toe.
Associated Products (1)Associated Documents - January 6, 2026•Document ID: 11027650Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- 109232
- Date Added:
- January 14, 2026
- Manufacturer:
- JEEP
SummaryLATCH - LIFTGATE
Associated Products (27)2026 Dodge Charger2026 Jeep Grand Cherokee2026 Jeep Grand Cherokee L2026 Jeep Grand Wagoneer2026 Jeep Wagoneer S2025 Dodge Charger2025 Jeep Grand Cherokee2025 Jeep Grand Cherokee L2025 Jeep Grand Wagoneer2025 Jeep Wagoneer2025 Jeep Wagoneer S2024 Dodge Charger2024 Jeep Grand Cherokee2024 Jeep Grand Cherokee L2024 Jeep Grand Wagoneer2024 Jeep Wagoneer2024 Jeep Wagoneer S2023 Jeep Grand Cherokee2023 Jeep Grand Cherokee L2023 Jeep Grand Wagoneer+ 7 moreAssociated Documents - January 6, 2026•Document ID: 11027649Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- 109231
- Date Added:
- January 14, 2026
- Manufacturer:
- JEEP
SummaryLATCH - LIFTGATE
Associated Products (27)2026 Dodge Charger2026 Jeep Grand Cherokee2026 Jeep Grand Cherokee L2026 Jeep Grand Wagoneer2026 Jeep Wagoneer S2025 Dodge Charger2025 Jeep Grand Cherokee2025 Jeep Grand Cherokee L2025 Jeep Grand Wagoneer2025 Jeep Wagoneer2025 Jeep Wagoneer S2024 Dodge Charger2024 Jeep Grand Cherokee2024 Jeep Grand Cherokee L2024 Jeep Grand Wagoneer2024 Jeep Wagoneer2024 Jeep Wagoneer S2023 Jeep Grand Cherokee2023 Jeep Grand Cherokee L2023 Jeep Grand Wagoneer+ 7 moreAssociated Documents - January 6, 2026•Document ID: 11027646Service Bulletin/Repair InstructionsSTEERING
- Mfr Comm. #:
- 109416
- Date Added:
- January 14, 2026
- Manufacturer:
- DODGE
SummaryMODULE - STEERING WHEEL
Associated Products (4)Associated Documents - December 18, 2025•Document ID: 11026804Service Bulletin/Repair InstructionsSUSPENSION
- Mfr Comm. #:
- 9100748
- Date Added:
- December 23, 2025
- Manufacturer:
- JEEP
SummaryBefore replacing front strut assembly components for a noise issue, please inspect the front upper strut mount bushings (LT/RT) by removing the plastic push pins and inspecting the mount BUSHING under the plastic cowl plenum (screen). 1.) If bushing looks worn, replace OR 2.) Replace the front upper strut mount first to see if replacing just the mount(s) resolves the issue.
Associated Products (3)Associated Documents - December 18, 2025•Document ID: 11026788Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-410-25
- Date Added:
- December 23, 2025
- Manufacturer:
- JEEP
SummaryFlash: Motor Control Processor A (MCP A) Updates 6B3 Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P1E18-00 - Internal Control Module Electronic Park Performance. ● P1625-00 - Park Pawl System Failure. ● P1626-00 - Park Pawl Motor Stuck. NOTE: If DTCs P1E25-00, P1625-00 or P1626-00 are active, the vehicle will stay in READY mode since the Electric Vehicle Control Unit (EVCU) is not able to confirm if the park pawl is engaged, and the vehicle will be secured. ● P0A78-00 - Drive Motor A Inverter Performance. ● P0A79-00 - Drive Motor B Inverter Performance. Customers may also comment on one or more of the following: ● Vehicle is not shutting off and draining the 12V battery. ● Unable to start the vehicle. This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then performing a Wheel End Disconnect Position Learn routine.
Associated Products (1)Associated Documents - December 18, 2025•Document ID: 11026787Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-409-25
- Date Added:
- December 23, 2025
- Manufacturer:
- JEEP
SummaryFlash: Motor Control Processor B (MCP B) Updates 6B3 ustomers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P1E18-00 - Internal Control Module Electronic Park Performance. ● P1625-00 - Park Pawl System Failure. ● P1626-00 - Park Pawl Motor Stuck. NOTE: If DTCs P1E25-00, P1625-00 or P1626-00 are active, the vehicle will stay in READY mode since the Electric Vehicle Control Unit (EVCU) is not able to confirm if the park pawl is engaged, and the vehicle will be secured. ● P0A78-00 - Drive Motor A Inverter Performance. ● P0A79-00 - Drive Motor B Inverter Performance. Customers may also comment on one or more of the following: ● Vehicle is not shutting off and draining the 12V battery. ● Unable to start the vehicle This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine.
Associated Products (1)Associated Documents - December 18, 2025•Document ID: 11026782Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-134-25 REV. B
- Date Added:
- December 23, 2025
- Manufacturer:
- JEEP
SummaryFlash: Integrated Dual Charging Module (IDCM) Updates 6B3 Customers may comment on one or more of the following: ● 12 volt battery lamp on the Instrument Panel Cluster (IPC) illuminated due to depleted 12 volt battery. ● Unable to charge at High Voltage Charging station at Level-1, Level-2 or DC Fast Charge. This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine.
Associated Products (1)Associated Documents - December 18, 2025•Document ID: 11026780Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-132-25 REV. B
- Date Added:
- December 23, 2025
- Manufacturer:
- JEEP
SummaryRSU With Additional Sleep Cycles for HV Battery Integrity Check - Flash: Integrated Dual Charging Module (IDCM) Updates 11B3 Customers may comment on one or more of the following: ● 12 volt battery lamp on the Instrument Panel Cluster (IPC) illuminated due to depleted 12 volt battery. ● Unable to charge at High Voltage Charging station at Level-1, Level-2 or DC Fast Charge. This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine.
Associated Products (1)Associated Documents - December 18, 2025•Document ID: 11026778Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-129-25 REV. C
- Date Added:
- December 23, 2025
- Manufacturer:
- JEEP
SummaryFlash: Integrated Dual Charging Module (IDCM) Updates 11B3 Customers may comment on one or more of the following: ● 12 volt battery lamp on the Instrument Panel Cluster (IPC) illuminated due to depleted 12 volt battery. ● Unable to charge at High Voltage Charging station at Level-1, Level-2 or DC Fast Charge. This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine.
Associated Products (1)Associated Documents - December 18, 2025•Document ID: 11026777Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-128-25 REV. B
- Date Added:
- December 23, 2025
- Manufacturer:
- JEEP
SummaryFlash: Battery Pack Control Module (BPCM) Updates 6B3 Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more the following Diagnostic Trouble Codes (DTCs): ● **P0AA7-00 - Hybrid/EV Battery Pack "A" Voltage Isolation Sensor. ● P1614-00 - ECU Reset/Recovery Occurred. ● B1A8A-00 - Multi-Module VIN Handshake Failure. ● P1CDB-00 - Hybrid/EV Wakeup Control 1 Output Circuit Short To Battery. ● P1E25-00 - EV Battery Failure Level 2. ● P0D10-00 - Hybrid/EV Battery Negative Contactor A Stuck Open. ● P0D09-00 - Hybrid/EV Battery Positive Contactor A Stuck Open.** ● P0DE6-00 - Hybrid/EV Battery Pack Cell Voltage Low. NOTE: Active or stored. ● P1DAF - Incompatible Limp In Action Requested. NOTE: Active or stored. ● P1CDE-00 – Hybrid/EV Wakeup Control 2 Output Circuit Short to Ground. ● P1CDA-00 – Hybrid/EV Wakeup Control 1 Output Circuit/Open. ● U00C6-00 – Lost Communication With AIR Pressure Sensor. ● P0F00-00 - Hybrid/EV Battery Module 1 Performance. ● P0F01-00 - Hybrid/EV Battery Module 2 Performance. ● P0F02-00 - Hybrid/EV Battery Module 3 Performance. ● P0F03-00 - Hybrid/EV Battery Module 4 Performance. ● P0F04-00 - Hybrid/EV Battery Module 5 Performance. ● P0F05-00 - Hybrid/EV Battery Module 6 Performance. ● P0F06-00 - Hybrid/EV Battery Module 7 Performance. ● P0F07-00 - Hybrid/EV Battery Module 8 Performance. ● P0F08-00 - Hybrid/EV Battery Module 9 Performance. ● P0F09-00 - Hybrid/EV Battery Module 10 Performance. ● P0F0A-00 - Hybrid/EV Battery Module 11 Performance. ● P0F0B-00 - Hybrid/EV Battery Module 12 Performance. ● P0F0C-00 - Hybrid/EV Battery Module 13 Performance. ● P0CA6-00 - Hybrid/EV Battery Charging Current High NOTE: If the following DTCs are present/active in the BPCM, Battery Pack replacement will be required. Guided Diagnostics will prompt you for the repair action if the diagnostic is present on the vehicle. ● P0ADB-00 - Hybrid/EV Battery Positive Contractor A Control Circuit Low. ● P0AE2-00 - Hybrid/EV Battery Precharge Contactor Circuit Stuck Closed. ● P0AA1-00 - Hybrid/EV Battery Positive Contactor "A" Stuck Closed. ● P0FF8-00 - Hybrid/EV Battery Precharge Contactor Circuit "B" Stuck Closed. Customers may also comment on one or more of the following: ● **Vehicle will not start. ● A warning message will appear in the Instrument Panel Cluster (IPC) informing the driver to stop safely because the vehicle will be shutting down soon.** ● Wrench icon is illuminated on the IPC. ● Vehicle will not enter Drive Ready Mode. This bulletin also includes the following software enhancements: ● **Software enhancements to prevent multiple DTCs from falsely setting. ● Improved battery State of Charge (SoC) accuracy in off-nominal conditions.** ● Bootloader update to prevent battery disconnect unit damage. ● Improvements in detecting pre-existing battery disconnect unit damage. ● Charging related enhancements that may lead to DTC P0CA6 falsely setting This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine
Associated Products (1)Associated Documents - December 18, 2025•Document ID: 11026776Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- 08-127-25 REV. C
- Date Added:
- December 23, 2025
- Manufacturer:
- JEEP
SummaryFlash: Electronic Vehicle Control Unit (EVCU) Updates 6B3 Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● C10FA-00 - Wheel Hub disconnect Actuator Performance Left. ● C10FB-00 - Wheel Hub disconnect Actuator Performance Right. ● C10F8-00 - Left Front Wheel Hub Disconnect Actuator Position Sensor Circuit Range/Performance. ● C10F9-00 - Right Front Wheel Hub Disconnect Actuator Position Sensor Circuit Range/Performance. ● P061B-00 - Internal Control Module Torque Calculation Performance. Customers may also comment on one or more of the following: ● **Will not be able to start the vehicle. ● 12V battery dead resulting in no start. ● Loss of communication between EVCU and BPCM can prevent high-voltage contactors from closing, resulting in a no-start condition. ● Powershot sometimes stuck at 0 seconds remaining which makes customer believe that Powershot is not working. ● Remote start functionality fails when the vehicle is actively charging "Charge Now" feature in app - multiple issues. ● Sometimes fails and does not close contactors, sometimes starts but CPIM lights are not commanded by EVCU and sets B12B4. ● WED closure at zero speed in case of miss at normal close speed. ● Drive-by-brake HMI message update to IPC in case of Limp Home mode. ● DTC U0594 setting after pedal learn (applicable only for plant).** ● Instrument Panel Cluster (IPC), radio range and charge time estimations and messages are not correct. ● Battery range incorrect. ● Improved battery State of Charge (SoC) accuracy in off-nominal conditions. ● Battery heating values incorrect on radio when on Performance Pages display. ● Charging does not start when plugged in. ● Charging is not indicating when battery is at full charge. ● Charging slow or takes too long. ● Bumps and jerks while accelerating or decelerating. ● Wrench icon is illuminated on the IPC. ● Turtle icon is illuminated on the IPC. ● Vehicle enters into limp home mode. In addition, the following software enhancements are also available: ● **Drive-by-brake improvements and an issue resolved where the vehicle incorrectly enters turtle mode while driving. ● Closed loop 12V silent charging which can help mitigate the 12V drain issue on the vehicle.** ● Enables compatibility with the Flo V3 Chargers This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine.
Associated Products (1)Associated Documents