Ford Bronco Service Bulletins (2026)
31 manufacturer communications on file.
- May 6, 2026•Document ID: 11032688Service Bulletin/Repair InstructionsUNKNOWN OR OTHER; SUSPENSION; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 54807
- Date Added:
- May 14, 2026
- Manufacturer:
- FORD
SummarySome 2025-2026 Bronco vehicles may exhibit various cruise control, pre-collision and/or front stabilizer bar disconnect related warning messages displayed in the instrument panel cluster (IPC) with diagnostic trouble code (DTC) U0418:86 stored in the image processing module A (IPMA). DTC U0415:00 may also be stored in the CHCM. <br /><br /> If wheel speed sensor specific DTCs are present in the anti-lock brake (ABS) module and/or warning messages other than those listed above are present, this SSM does not apply. Refer to the Workshop Manual (WSM) for normal diagnostics. <br /><br /> If a vehicle exhibits this condition, carefully inspect the rear wheel speed sensors for correct installation with the rear wheel speed sensor body seated flush against the axle housing. Repair or replace the affected rear wheel speed sensor as needed, clear the DTC, and retest. Refer to WSM, Section 206-09. <br /><br /> This condition does not affect vehicle durability, and additional diagnosis or service is not recommended at this time. Replacement or reprogramming of the IPMA and/or ABS modules will not resolve this
Associated Products (2)Associated Documents - April 24, 2026•Document ID: 11031630Service Bulletin/Repair InstructionsPOWER TRAIN; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; VEHICLE SPEED CONTROL
- Mfr Comm. #:
- SSM 54772
- Date Added:
- April 28, 2026
- Manufacturer:
- FORD
SummarySome 2025-2026 Bronco vehicles may exhibit various cruise control, pre-collision and/or front stabilizer bar disconnect related warning messages displayed in the instrument panel cluster (IPC) with diagnostic trouble code (DTC) U0418:86 stored in the image processing module A (IPMA) and no wheel speed sensor specific DTCs present in the anti-lock brake (ABS) module. DTC U0415:00 may also be stored in the CHCM. If a vehicle exhibits this condition, carefully inspect the rear wheel speed sensors for correct installation with the rear wheel speed sensor body seated flush against the axle housing. Repair or replace the affected rear wheel speed sensor as needed, clear the DTC, and retest. Refer to Workshop Manual (WSM), Section 206-09. If the condition persists, advise the customer that Engineering is working on a software robustness solution that is expected to be available Q2 2026. <br /><br /> This condition does not affect vehicle durability, and additional diagnosis or service is not recommended at this time. Replacement or reprogramming of the IPMA and/or ABS modules will not resolve this condition.
Associated Products (2)Associated Documents - April 23, 2026•Document ID: 11031626Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; UNKNOWN OR OTHER
- Mfr Comm. #:
- SSM 54765
- Date Added:
- April 28, 2026
- Manufacturer:
- FORD
SummarySome 2025-2026 Bronco, Bronco Sport, F-Super Duty, Maverick, Mustang, Mustang Mach-E, Ranger and Transit vehicles may exhibit a no audio/sound condition. This may be due to the software in the audio control module (ACM). To determine if it is a software concern, disconnect the vehicle's 12-volt battery cables for 10 minutes and reconnect. If the concern is still present, continue with normal diagnostics in Workshop Manual (WSM), Section 415-00 Information and Entertainment System > General Information > Diagnosis and Testing and repair as necessary outside of this article. If the no audio/sound concern is resolved, engineering is currently working on a solution for this condition that is expected by September 2026. Replacement or reprogramming of the ACM and or audio digital signal processing module (DSP) may not resolve this condition at this time. Monitor Professional Technician System (PTS) for additional information and schedule service appointments for customers once the repair becomes available. If a customer's vehicle exhibits this concern, submit a Vehicle Concern Report.
Associated Products (21)2026 Ford Bronco2026 Ford Bronco Sport2026 Ford F-2502026 Ford F-3502026 Ford F-4502026 Ford F-5502026 Ford Maverick2026 Ford Mustang2026 Ford Mustang Mach-E2026 Ford Ranger2025 Ford Bronco2025 Ford Bronco Sport2025 Ford F-2502025 Ford F-3502025 Ford F-4502025 Ford F-5502025 Ford Maverick2025 Ford Mustang2025 Ford Mustang Mach-E2025 Ford Ranger+ 1 moreAssociated Documents - April 9, 2026•Document ID: 11031298Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- SSM 54733
- Date Added:
- April 14, 2026
- Manufacturer:
- FORD
SummarySome 2025-2026 Bronco/Expedition/Navigator/F-150/Ranger vehicles may exhibit a "Check Brake System" message in the instrument panel cluster (IPC) and/or an illuminated anti-lock brake system (ABS) indicator with diagnostic trouble code (DTC) C0563 stored in the ABS module. This may be due to air still trapped in the system after prior bleeding attempts and/or brake service mode being enabled. The applicable pinpoint test (PPT) in Workshop Manual (WSM), Section 206-09 has been updated to improve diagnostics for this concern. Make sure the latest software version of Ford Diagnosis and Repair System (FDRS) is being used when performing the brake system pressure bleeding routine.
Associated Products (10)Associated Documents - March 31, 2026•Document ID: 11030818Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL
- Mfr Comm. #:
- SSM 54704
- Date Added:
- April 6, 2026
- Manufacturer:
- FORD
SummarySome 2025-2026 Bronco vehicles may exhibit a "Cruise Control Not Available" or "Adaptive Cruise Control Not Available" and/or "Pre-Collision Assist Not Available" message displayed in the instrument panel cluster (IPC) with diagnostic trouble code (DTC) U0418:86 stored in the image processing module A (IPMA) and no DTCs present in the anti-lock brake (ABS) module
Associated Products (2)Associated Documents - March 27, 2026•Document ID: 11030740Over The AirVISIBILITY/WIPER; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SYNC-26.2.7.6 Bronco
- Date Added:
- April 6, 2026
- Manufacturer:
- FORD
Summary"26S09 Recall Remedy -Update to enable rearview camera image to display when in reverse after infotainment screen thermal shutdown"
Associated Products (1)Associated Documents - March 25, 2026•Document ID: 11030806Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- SSM 54686
- Date Added:
- April 6, 2026
- Manufacturer:
- FORD
SummarySome 2024-2026 Bronco vehicles that have the dealer installed option (DIO)/accessory trailer tow kit installed may exhibit a condition where the trailer module (TRM) is not detected, or a "Procedure Unsuccessful" message is displayed after running a configuration application using the Ford Diagnosis and Repair System (FDRS) scan tool. This may be due to any of the following issues:<br /><br /> -The FDRS scan tool version is not at the latest software level. To correct this condition, run the "Towbar Configuration" application using the latest software version of the FDRS scan tool.<br /><br /> -The "TRM - Trailer Module (TRM) Configuration" application being run instead of the "Towbar Configuration" application. Accessory TRMs are preprogrammed and only the "Towbar Configuration" application should be run to configure the TRM properly for trailer tow capabilities. Too many attempts to program the TRM using the "TRM - Trailer Module (TRM) Configuration" application may result in a faulted TRM.
Associated Products (3)Associated Documents - March 18, 2026•Document ID: 11030790Service Bulletin/Repair InstructionsVEHICLE SPEED CONTROL; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 54673
- Date Added:
- April 6, 2026
- Manufacturer:
- FORD
SummarySome 2025-2026 Bronco Badlands and Raptor only vehicles may exhibit a "Cruise Control Not Available" or "Active Cruise Control Not Available" message displayed in the instrument panel cluster (IPC) with diagnostic trouble code (DTC) U0418:86 stored in the image processing module A (IPMA) and no DTCs present in the anti-lock brake (ABS) module.
Associated Products (2)Associated Documents - March 16, 2026•Document ID: 11030109Service Bulletin/Repair InstructionsVISIBILITY/WIPER; ELECTRICAL SYSTEM; UNKNOWN OR OTHER
- Mfr Comm. #:
- SSM 54665
- Date Added:
- March 18, 2026
- Manufacturer:
- FORD
SummarySome 2026 F-150/Bronco/Ranger/Mustang Mach-E vehicles may exhibit a blank center display screen after deactivating transport mode. To correct the condition, cycle the ignition from On/Ready to Off. Open, close and lock the door and let the vehicle sit for a minimum of 5 minutes. Reprogramming or replacement of any modules will not correct the condition. If the concern continues, refer to Workshop Manual (WSM), Section 415-00 Information and Entertainment System for normal diagnostics.
Associated Products (4)Associated Documents - February 24, 2026•Document ID: 11029052Service Bulletin/Repair InstructionsSTRUCTURE:BODY; ELECTRICAL SYSTEM; UNKNOWN OR OTHER
- Mfr Comm. #:
- SSM 54601
- Date Added:
- February 27, 2026
- Manufacturer:
- FORD
SummaryFord and Lincoln vehicles equipped with wired keyless entry keypad systems and accessory wireless keyless entry keypad systems may or may not come with a wallet card containing the master code. Unlike the integrated wired keypad, the accessory wireless keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool or from the label printed on the body control module (BCM). The Factory Keyless Entry Code application within the diagnostic scan tool will not provide an applicable master code for the accessory wireless keypad. If the wallet card for an accessory keypad is not available, the "Wireless RF Keypad Diagnosis Guide" can be referenced and provides direction on how to retrieve the master code. This guide is located under the Workshop Manual tab > Accessories > Installation > Wireless RF Keypad Diagnosis Guide > PPT C > Step C2.<br /><br /> Note: The only available keypad for some vehicles from the assembly plant is the accessory wireless keyless entry keypad. The integrated wired keypad cannot be installed on vehicles not equipped from the factory with a wired keyless entry k
Associated Products (387)2026 Ford Bronco2026 Ford Bronco Sport2026 Ford Escape2026 Ford Expedition2026 Ford Explorer2026 Ford F-1502026 Ford F-2502026 Ford F-3502026 Ford F-4502026 Ford F-5502026 Ford Maverick2026 Ford Mustang2026 Ford Ranger2025 Ford Bronco2025 Ford Bronco Sport2025 Ford Escape2025 Ford Expedition2025 Ford Explorer2025 Ford F-1502025 Ford F-250+ 367 moreAssociated Documents - February 17, 2026•Document ID: 11029081Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- SSM 54592
- Date Added:
- February 27, 2026
- Manufacturer:
- FORD
SummaryFor 20172026 vehicles equipped with a 10R transmission, a revision to the Road Testing Vehicle procedure has been made in the WSM, located in Section 307-01 > Diagnosis and Testing. This updated procedure improves the diagnosis of customer reported transmission concerns and aids in locating the proper root cause. During diagnosis and testing, details regarding whether the condition is more prevalent when the vehicle is hot or cold, throttle percentage at the time of occurrence, vehicle speed, the specific shift involved, and whether the issue occurs during transmission engagements (N>R, N>D, R>D, or D>R) should be noted. Engineering requests including these detailed operating conditions that will significantly assist with root cause analysis. Diagnosis, testing, and repair should use established labor times outside this article.
Associated Products (85)2026 Ford Bronco2026 Ford Expedition2026 Ford Explorer2026 Ford F-1502026 Ford F-2502026 Ford F-3502026 Ford F-4502026 Ford F-5502026 Ford F-6502026 Ford F-7502026 Ford Mustang2026 Ford Ranger2026 Lincoln Aviator2026 Lincoln Navigator2025 Ford Bronco2025 Ford Expedition2025 Ford Explorer2025 Ford F-1502025 Ford F-2502025 Ford F-350+ 65 moreAssociated Documents