2019-2021 Audi A/S/RS Models Rear Axle Lock Nut Recall
Volkswagen Group of America, Inc. (Audi) has issued a recall (NHTSA ID 21V295000, Audi 42L1) for certain 2019-2021 Audi A, S, and RS models. The recall addresses a potential issue where the rear axle trailing arm lock nut may break due to stress corrosion, leading to rear axle misalignment and…

Também se aplica a
- Audi A6
- 2020
- Audi A8
- 2020–2021
- Audi RS Q8
- 2021
- Audi S5
- 2019–2021
- Audi S8
- 2020–2021
Safety Risk: Rear Axle Lock Nut Failure
Volkswagen Group of America, Inc. (Audi) has identified a safety concern affecting certain 2019-2021 Audi A, S, and RS models. The lock nut on the trailing arm of the rear axle may break due to stress corrosion. This critical component failure can lead to the rear axle becoming misaligned. A misaligned rear axle significantly increases the risk of losing control of the vehicle, which in turn elevates the likelihood of a crash. This issue is serious and requires immediate attention.
What's Being Recalled
This recall, identified by NHTSA ID 21V295000 and Audi's internal number 42L1, involves the rear axle assembly. Specifically, the lock nut on the trailing arm is the component of concern. The affected vehicles include various 2019-2021 Audi A, S, and RS models, covering vehicles like the A6, S8, S5, A8, and RS Q8.
Manufacturer's Remedy
Audi dealers will replace the affected lock nuts free of charge. If necessary, the associated bolts will also be replaced to ensure the integrity of the rear axle assembly. This repair aims to prevent the potential misalignment and subsequent loss of control. Owners will not incur any cost for this repair.
How to Check if Your Vehicle is Affected
Owner notification letters were mailed on June 4, 2021, informing owners of the recall and instructing them on the next steps. If you own a 2019-2021 Audi A, S, or RS model and have not received a notification, you can contact Audi customer service directly at 1-800-253-2834. You can also visit the NHTSA website at www.safercar.gov and enter your Vehicle Identification Number (VIN) to confirm if your specific vehicle is included in this 2021 Audi A6 recall.
Important Information for Owners
It is crucial to address this recall promptly to ensure your safety and the proper functioning of your vehicle's suspension. Do not delay in scheduling the necessary repair with an authorized Audi dealer. This 2021 Audi A6 recall is a safety measure designed to prevent serious incidents.
Source: National Highway Traffic Safety Administration (NHTSA) Recall ID: 21V295000
Frequently Asked Questions
- What is the specific problem with the Audi rear axle?
- The problem involves the lock nut on the trailing arm of the rear axle, which may break due to stress corrosion, potentially leading to rear axle misalignment.
- What are the potential consequences of this issue?
- A broken lock nut can cause the rear axle to misalign, leading to a loss of vehicle control and increasing the risk of a crash.
- How will Audi fix this recall (42L1)?
- Audi dealers will replace the faulty lock nuts and, if needed, the associated bolts, free of charge to the owner.
- How can I confirm if my Audi is part of the 2021 Audi A6 recall?
- You can check your VIN on the www.safercar.gov website or contact Audi customer service at 1-800-253-2834, referencing recall 42L1 or NHTSA ID 21V295000.
Related Articles
2021 Audi A6 Problems: Recalls, Complaints & TSBs
The 2021 Audi A6 has been subject to several recalls, primarily concerning its electrical system and suspension components. While no owner complaints or federal investigations have been reported, numerous technical service bulletins address issues ranging from engine stalling and transmission…
2021 Audi A6/A7/S6/S7 Engine Coolant Service Action 19P9 Closure
Audi has issued a closure notice for Service Action 19P9, related to engine coolant concentration, affecting 2021 Audi A6, A7, S6, and S7 models. This notice sets deadlines for dealers to submit claims for completed work.
2021-2025 Audi A4, A6, Q5 Drive Belt Noise TSB 2061461/15
Audi Technical Service Bulletin 2061461/15 addresses grinding, squeaking, or tweeting noises from the starter/generator drive belt, or the belt falling off, in 2021-2025 Audi A4, A6, and Q5 models with the 2.0L TFSI engine. It also covers the 'Electrical system: Malfunction!' warning.
2019-2026 Audi A6/A7 Air Suspension Compressor TSB
Audi has issued Technical Service Bulletin 2062932/2 for 2019-2026 A6 and A7 models concerning inaccurate air suspension compressor pressure readings displayed by the J775 control module. This TSB outlines a diagnostic procedure using a special tool.
2019-2025 Audi Starter/Generator Belt Noise TSB 2061461/14
Audi TSB 2061641/14 addresses starter/generator drive belt noise or detachment in 2019-2025 A4, A5, A6, A7, and Q5 2.0TFSI mild Hybrid models. Symptoms include engine noises and the warning 'Electrical system: Malfunction! Please go to workshop'. The TSB details diagnostic and repair steps for…
Leave a comment
Comments are moderated and may take a moment to appear. Only your first name and the initial of your last name are shown publicly.
Comments
Be the first to comment.