Porsche · Model Report
Showing safety data for the 2010 model year only.
Ohlins USA, Inc (Ohlins) is recalling certain Front Struts, part number POS 5N20. These struts were sold as part of Ohlins strut kits part number POZ MN02, intended for installation on 1999-2005 Porsche 911 Carrera 4 and 4S (generation 996), and 2001-2006 Porsche 911 Turbo / Turbo S (generation 996) and kit part number POZ MN05, intended for installation on 2005-2012 Porsche 911 Carrera 4 and 4S (generation 997), and 2006-2013 Porsche 911 Turbo / Turbo S (generation 997). The pin of the strut may experience excessive stress during maximum steering, possibly resulting breakage of the pin.
Porsche is recalling certain model year 2010 911 GT3 vehicles manufactured May 15, 2009, through February 11, 2010. The rear wheel hubs may be prone to failure under certain driving conditions. Also, the original, suggested maintenance intervals may be insufficient to prevent wheel hub failure.
PORSCHE IS RECALLING CERTAIN MODEL YEAR 2010-2011, 911 TURBO; TURBO S, 911 GT3, GT3 RS AND GT2 RS HIGH PERFORMANCE VEHICLES, MANUFACTURED FROM MAY 18, 2009 THROUGH SEPTEMBER 17, 2010, AND EQUIPPED WITH CENTER LOCKING HUB AND WHEEL ASSEMBLIES. OVER TIME THE HUBS CAN WEAR PREMATURELY.
PORSCHE IS RECALLING CERTAIN AFTERMARKET CENTER WHEEL MOUNTING KITS EQUIPPED WITH CENTER WHEEL LOCK AND HUB ASSEMBLIES BEARING THE TORQUE SPECIFICATION INSCRIPTION "500 NM" ON THE CENTER BOLT SOLD FOR USE ON MODEL YEAR 2010 AND 2011 PORSCHE 911 TURBO VEHICLES. SHOULD VEHICLES EQUIPPED WITH THE AFFECTED KITS BE OPERATED UNDER RACING CONDITIONS, THERE IS A POSSIBILITY THAT THE WHEEL RETENTION SYSTEM MAY FAIL.
Last year my 2010 Porsche 911 GT3RS experienced a catastrophic engine failure while on the road. I had to shut off the car in the middle of a 4-lane highway and try to coast to a stop while navigating around much faster traffic risking my safety and the safety of other drivers. There was no warning prior to the failure. Just a sudden bang, followed by shaking and rattling noise. Once the car was towed to an automotive repair shop, the engine was taken apart and it was concluded that a piece from the intake broke off and got swallowed by the engine while on the road. I have images and documentation of the damage and the parts are available for inspection. The trouble is that the failed piece of the intake was part of a manufacturer recall to fix that exact issue back in 2013. After the findings of the repair shop I contacted Porsche Cars North America. The car was subsequently brought in to a Porsche dealer for inspection, where I was told multiple times that a failed recalled part would be covered by the manufacturer's good will repair policy. After 4 months of back and forth with the headquarters I was told that Porsche would not be responsible. I have spoken to other owners of this exact model cars and several of them have confirmed that their replacement intakes have failed, in some cases causing the engine to completely seize while on the road. Thankfully that did not happen to me.
No injuries · No fire · No crash
I HAD THE 8 COOLANT FITTINGS, PRONE TO EPOXY FAILURES, SECURED TO HOUSINGS BY WELDING. COST FOR WELDING WAS $275. *TR
No injuries · No fire · No crash
COOLANT LINES / FITTINGS WELDED/ PINNED - MK2 MEZGER ENGINE HAS A FAULTY DESIGN OF COOLANT HOSES/LINES. UPON RESEARCH ONLINE, I AM NOT THE ONLY PERSON AFFECTED BUT ALL TURBO/GT3/RS/GT2 CARS FROM 2004-CURRENT I HAVE ALSO COME ACROSS CARS WITH LESS THAN 10K MILES THAT HAD THIS PROBLEM SO MY PROBLEM IS NOT ISOLATED. THERE HAS BEEN INCIDENCE ON HIGHWAY WHERE THESE HOSES JUST BURST OR LOSES FITTING AND SPILLS COOLANT CONTENTS ALL OVER THE ROAD. THIS ALSO CAUSE CAR TO SPIN OUT SINCE LOST IN PRESSURE AND TRACTION. VERY DANGEROUS. PORSCHE DEALER WILL ONLY USE DIFFERENT GLUE TO FIT THEM. PROPER WAY IS NOT USE RUBBER HOSE BUT TO USE METAL PIPES AND WELD THEM SO THESE COOLANT LINES DO NOT EVER FALL OUT. THIS COULD HAVE CAUSED CATASTROPHIC INJURY IN PUBLIC ROAD. PORSCHE DENIES ANY FAULTY OR SUB-STANDARD MATERIAL THAT WAS USED IN A CRITICAL COMPONENT OF HIGH PERFORMANCE ENGINE. IN ORDER FOR ME TO FIX THIS, I HAVE TO PAY MY PORSCHE MECHANIC TO REMOVE THE ENGINE, FIND THE COOLANT LINES, REPLACE ALL OF THE HOSES WITH METAL PIPE LINES, WELD THEM, THEN PUT IT BACK IN THE ENGINE BAY. I FEEL THAT I SHOULD HAVE TO PAY FOR THIS OUT OF POCKET FOR SAFETY OF MYSELF OR OTHERS IN PUBLIC ROAD. PORSCHE SUGGESTED THAT THEY WILL USE THE SAME RUBBER HOSES WITH JUST A BETTER ADHESIVE GLUE TO HOLD THEM. THEY WILL FAIL WITHIN TIME. THIS IS A TEMPORARY FIX THEY ARE OFFERING. IT IS FOR SAFETY OF THE MOTORIST. *TR
No injuries · No fire · No crash
RIGHT REAR CENTERLOCK HUB FAILED/SHEARED OFF RESULTING IN HIGH SPEED EXIT FROM ROAD SURFACE AND 800' SLIDE. WHEEL AND TIRE LEFT VEHICLE AND TRAVELED APPROXIMATELY 1500' CROSSING ACTIVE ROAD. CENTERLOCK NUT WAS FOUND ABOUT 700' FROM VEHICLE. ISSUE SEEMS TO BE FAILURE OF THE CENTERLOCK HUB CAN RESULT IN LOSS OF WHEEL AND VEHICLE CRASH. BUTTONWILLOW RACEWAY PARK, CA UPON EXITING BUTTONWILLOW TURN 12 (CW DIRECTION), LOUD POP HEARD FROM RIGHT REAR OF CAR (WITNESS DESCRIBE VERY LOUD POP/BANG "LIKE HAND GRENADE GOING OFF"), VEHICLE IMMEDIATELY ROTATED COUNTER CLOCKWISE AND EXITED ROAD SURFACE, SLIDING SIDEWAYS (RIGHT SIDE IN DIRECTION OF SLIDE), RIGHT SIDE DOWN, LEFT SIDE UP (BOTH OCCUPANTS NOTED THEY FELT THE VEHICLE WAS GOING TO ROLL), PARALLEL TO THE ROAD SURFACE. AFTER SLIDING POSSIBLY 600 FEET, CAR HIT INTERSECTING ROAD (ABOUT 6 INCH RISE IN SURFACE) BECOMING AIRBORNE FOR POSSIBLY 20 FEET PASSING OVER THE ROAD AND PIVOTING CLOCKWISE. UPON LANDING, CAR SLID PARALLEL WITH ORIGINAL ROAD SURFACE, ALIGNED WITH ROAD COMING TO REST AFTER ABOUT 800 FEET AFTER THE HUB FAILED. CAR DID NOT ROLL, THE SLIDE SIDEWAYS AND LIKELY THE IMPACT WITH THE CROSS ROAD DID SIGNIFICANT DAMAGE TO THE CAR. DETAILS ON VEHICLE: - WHEEL WAS INSTALLED 2 DAYS PRIOR TO INCIDENT AFTER CHANGING TO NEW DOT TIRES. PORSCHE CENTERLOCK MOUNTING AND TORQUING PROCEDURE WERE FOLLOWED, TORQUING TO 444 FT LB. - TORQUE WRENCH SETTING WAS VERIFIED AFTER INCIDENT AND FOUND TO BE SET PROPERLY TO 444 FT LB. - DATA SHOWS VEHICLE WAS TRAVELING ABOUT 100 MPH, WITH THROTTLE ON AND LOADED WITH 1.1 - 1.2 LATERAL GS (TURNING LEFT, LOADED ON RIGHT SIDE), BRAKE AND STEERING INFORMATION IS NOT AVAILABLE. WHEN HUB FAILED. *TR