Ford F-150 Complaints
39,812 consumer complaints on file.
- #11758129August 20, 2026VEHICLE SPEED CONTROL, ELECTRICAL SYSTEM
Due to a dangerous design flaw in the 2021 Ford F150, I was put in a potentially dangerous situation by completely losing all power in the vehicle on a backroad. Design flaw is the DCN module, which floods into the vehicles electrical system/body of vehicle through the cowel drain that can supposedly be blocked by a singular piece of pine straw. Due to the design flaw, the vehicle completely lost all power and all electronics failed while driving down the road at 45 mph, putting both me and my father (riding passenger seat) in immediate danger. Ford knows and is aware of the design flaw and has refused to issue a recall, not only affecting my safety, but now I am going back and forth with ford over the fix to the tune of $2800 that they refuse to fix (vehicle is a gold certified cpo, has extended warranty). When asked how to prevent in the future, ford was and is not aware of how to prevent in the future, and I can not get to the cowel drain clog without professional equipment and ford performing. There is no way to tell the cowel drain is clogged or not, and there is not anything in the ford owners manual related to maintenance of the cowel drain. Again, due to the inappropriately designed drain, this caused water leakage into my truck, posing an immediate threat to my life and others around me. I have all of the videos and pictures needed to show the failure of the system to provide to move this forward to get resolved. I had complete loss of power and electronics on the road. I tried to attach video but it would not let me. I can attach via email when requested.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11757955August 19, 2026VISIBILITY/WIPER, EXTERIOR LIGHTING, ELECTRICAL SYSTEM
This vehicle 2016 ford F150 is known to have shorting issues. From literally all wiring harnesses. I had a small fire in my truck due to this issue, caused melting of the ribbon cable in my seat heater control module, which is a known issue from Ford. I have shorting in my turn signal switch (no wipers). Is that safe? I am a research scientist and engineer, I can tell you now it is not safe. If i need to prove it, I can do so with ease and write the necessary literature. If I cant use my AC sometimes, the windows fog, then i cant use the wipers to unfog them, how is this not a visibility issue? Not to mention all the shorts. I have a 40 gallon fuel tank, if any shorts get near it, is that going to be a fun experience for me? Please give Ford a penalty, the average owner of this truck pays thousands a year in repairs. I paid $17,800.00 in 2025 to repair this piece of shit. And it still has major issues. This is something ford needs to address, i want my wiring to be replaced, i bought a new engine, what if i cant use it especailly with the 3 year warranty bc the wiring consistently shorts and fails. unacceptable for a truck that's sticker price is $80k. This is a major problem, I will file claims until im afforded a response
- Crash:
- No
- Fire:
- Yes
- Injuries:
- 0
- Deaths:
- 0
- #11757980August 19, 2026POWER TRAIN
The contact owns a 2017 Ford F-150. The contact stated that while driving 50 MPH, the transmission unexpectedly downshifted and the powertrain warning light illuminated. The transmission was stuck between third and fifth gear. In addition, the transmission failed to shift from park to drive until the vehicle was turned off. The failure was a persistent failure. The vehicle was taken to the dealer, and a portable scanner was attached; DTCs P0722 and P061A were retrieved. The contact received notification of NHTSA Campaign Number: 26V237000 (Power Train). The vehicle was not repaired under the recall. The contact was informed that the failure codes were not the required failure codes associated with the recall. The manufacturer was made aware of the failure, and a case was filed. The failure mileage was approximately 95,000.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11758001August 19, 2026POWER TRAIN
Ford Motor sent notice 26s28 to me regarding a possible problem with my transmission/powertrain. On August 12 they reprogrammed my Powertrain Control Module. In the letter regarding this upgrade they also stated, and I quote: " If your dashboard displays a Malfunction Indicator Lamp(MIL)or Powertrain Warning Lamp(wrench symbol) either before or after the software update is installed, your dealer will run a diagnostic test. If specific diagnostic trouble codes relating to the transmission codes relating to the transmission are found, the dealer will replace the lead frame at no cost to you under Extended Warranty Program 26N04." The day after the software update my truck did for first time ever display a yellow wrench symbol. They said bring it back in and they'd run a diagnostic. They did and it showed a stored code P0717. This code relates directly to the Input/Turbine Speed Sensor. It is a sensor built directly into the lead frame mentioned earlier, which Ford said they'd replace at no cost under 26N04. But from Fords point of view, this is not one of their acceptable codes for free lead frame replacement. WHAT? It is built "directly into the lead frame, and can't be independently replaced." In essence, it IS the Leadframe. This code should obviously be included in the group of acceptable Ford codes as relating to this issue. My case number with Ford is CXH-08937978-D1N4V6. Thank you for your time in reviewing this situation.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11758033August 19, 2026FUEL/PROPULSION SYSTEM
I made an appointment for July 22,2026 with Purvis Ford in Fredericksburg to have the 28S26 recall for a transmission issue outlined in the recall. The process was estimated to be 4-6 hours. Purvis Ford called said the software upgrade was completed and i could get my truck. The truck would not shift out of 1st gear so i turned around and went back to the dealer and told the service advisor the situation. He told me i had to drive it for about two hundred miles to get it adapted to my driving habits. I drove it about 20 miles to my home and never shifted out of low gear. I called the service advisor and he said it needed to be towed back to the dealership for a second recall procedure. That was scheduled for the following Friday. On Thursday they called and said it needed a new transmission. The transmission was working fine when i delivered it to them. I did exact all what they told me to do. I’ve made several calls to Ford customer Service with no help from them. Monday the service manager told me it was going to be test driven by a factory technician and they would get back to me. It’s now Wednesday and no word on what the results are. I called this morning and was supposed to get called back but as of this hour nothing. What course of action do i have at this point.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11758088August 19, 2026POWER TRAIN
The contact owns a 2011 Ford F-150. The contact stated that while driving at an undisclosed speed, the transmission unexpectedly downshifted to a lower gear. The contact stated that there was smoke coming from the exhaust pipe. The contact stated that smoke was covering the roadway. The vehicle was driven to the shoulder of the road. The contact stated that while inspecting the vehicle, there was oil leaking around the manifold. The vehicle was towed to the residence. The dealer was made aware of the failure. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The contact stated that the failure had occurred while driving to the dealer for a scheduled recall repair. The contact received notification of NHTSA Campaign Number: 16V248000 (Power Train). The manufacturer was not made aware of the failure. The failure mileage was approximately 218,000.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11758119August 19, 2026ELECTRICAL SYSTEM
Back up camera not working
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11757857August 19, 2026POWER TRAIN
Beginning approximately one year ago, my Ford F-150 has intermittently experienced a serious transmission problem during acceleration. The transmission appears to momentarily lose the connection between the engine and drivetrain. When this occurs, the truck hesitates or fails to deliver power when I press the accelerator, then suddenly and very harshly engages the next gear. The problem can occur when the vehicle is cold or fully warmed up. This creates a significant safety concern because the vehicle can unexpectedly fail to accelerate when needed, particularly when merging onto a highway, climbing a hill, or accelerating from a traffic light with other vehicles behind me. The sudden, harsh engagement that follows the hesitation is also unexpected and could affect the vehicle's stability or the driver's ability to control the vehicle. I contacted my Ford dealer on August 17, 2026, regarding the problem. The dealer indicated that they are familiar with this type of problem on this transmission and stated that their repair procedure is to replace the entire transmission rather than attempt to repair it. I was told the estimated cost would be approximately $10,000–$12,000. The truck currently has approximately 71,000 miles. Although it is no longer under warranty, I am concerned that a major transmission component is experiencing a potentially serious safety-related failure at this mileage. I believe Ford should investigate this issue and determine whether there is a defect or widespread failure affecting these transmissions. Given the nature of the problem and the potential safety consequences, I also believe Ford should provide financial assistance toward the repair, particularly if this is a known or recurring transmission problem.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11757870August 19, 2026POWER TRAIN
The contact owns a 2011 Ford F-150. The contact stated that while driving at speeds above 50 MPH, the transmission unexpectedly downshifted, causing the vehicle to suddenly decelerate. During the failure, the WRENCH icon was displayed, and the check engine warning light was illuminated. The vehicle was turned off and restarted, and the failure was self-corrected, but the failure persisted. The contact stated that the vehicle was previously serviced under NHTSA Campaign Number: 19V075000 (POWER TRAIN). The contact stated that the vehicle had experienced the failure listed in the recall. The local dealer and manufacturer were not notified of the failure. The failure mileage was 150,000.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11757933August 19, 2026SEAT BELTS, AIR BAGS, ELECTRICAL SYSTEM
There is an issue with my cowl which has 1 drain hole, on passenger side which if gets clogged with debris, causes water to build up and water to intrude from cowl into interior truck causing water intrusion to the body control module and electrical issues, and carpet is wet and creates mold smell and other safety issues. Cowl is not removable
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11757696August 18, 2026SERVICE BRAKES, HYDRAULIC
The contact owns a 2013 Ford F-150. The contact stated that while driving approximately 35 MPH, the brake light warning light illuminated, and while depressing brake pedal, the brake pedal went to the floorboard. The transmission was shifted to a lower gear, and the hazard lights were activated, and the vehicle was slowly driven to the residence. The vehicle was later towed to a dealer to be diagnosed, and it was determined that the brake booster was contaminated with brake fluid, and that the brake master cylinder piston had a tear in the piston seal, and the brake master cylinder and brake booster needed to be replaced. The vehicle was repaired. The contact associated the failure with Manufacturer Recall Number: 16F24. The manufacturer was notified of the failure and a complaint was filed. The failure mileage was 32,145.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11757698August 18, 2026ELECTRICAL SYSTEM, ENGINE, UNKNOWN OR OTHER
I moved my vehicle from driveway to park on the street so my husband could park in the driveway. I then turned my vehicle off and roughly 2 hours later, a lady came screaming "fire fire fire!" I went to see where she was talking about and my truck was smoking under the hood, I then called the fire department and they came to extinguish the fire. I was unaware of any recalls as I am the 3rd owner of this vehicle.
- Crash:
- No
- Fire:
- Yes
- Injuries:
- 0
- Deaths:
- 0
- #11757699August 18, 2026ELECTRICAL SYSTEM, POWER TRAIN, VEHICLE SPEED CONTROL
I purchased a 2017 Ford F-150 on July 9th. It is covered under Safety Recall 26S28 (NHTSA Campaign 26V23700). On July 25th, the vehicle entered highway limp mode due to an Output Speed Sensor failure (Code P0722). A Ford dealership performed the 26S28 software flash but left the failing physical lead frame hardware in the vehicle. On August 15th, the truck reverted to a dangerous limp mode on the highway due to the same unaddressed P0722 hardware failure. Ford Corporate is refusing to authorize the physical hardware replacement under the safety recall framework, leaving the vehicle fundamentally unsafe to drive.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11757737August 18, 2026POWER TRAIN
Vehicle will downshift from 6th gear to 3rd gear at highway speed (55 mph+)
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11757738August 18, 2026POWER TRAIN
Lead Frame failure. 19N01 recall. When the failure occurred I was on I-80 driving at 78 mph. The vehicle suddenly down shifted causing my speed to drop to a dangerous speed. I had to exit the roadway immediately to avoid being rear ended or worse. I never received a recall letter from Ford.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11757829August 18, 2026POWER TRAIN
CDF drum failure and torque converter failure. Started at 70,000 miles by shifting hard going into 8th gear. Now it has completely failed at 81,000 miles. It is a safety concern because now the vehicle goes straight to 4th gear when you shift out the park. Fourth gear is too steep to leave from a stop and can lead to somebody getting rear-ended. This is a well-documented problem for the 10r80 transmission and something needs to be done about it.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11757756August 18, 2026POWER TRAIN
I believe my vehicle is exhibiting the same transmission issues leading up to the failure of transmission components identified in NHTSA Recall #: 26V402. My vehicle is having hard downshifts at low speeds, usually between 3rd and 1st gear, while comping to a stop. It seems to happen randomly. My VIN number was not found to be in the effected vehicles when searching on the NHTSA Recall page.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11757348August 17, 2026ELECTRICAL SYSTEM, ENGINE, POWER TRAIN
Several times now the truck will get "stuck" in N or D and will not move. No loss of power, and can't manually shift out to park. Now waiting for a tow to the dealer, they were supposed to correct this when I took it in the last time it happened but didn't. There are a lot of online complaints IRT this issue with the powerboost 150 and other 150s. Mine was made at the Dearborn plant. Huge safety issue and it needs to be addressed
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11757366August 17, 2026POWER TRAIN
The transmission started skipping 4th gear a couple days later started randomly changing gears from 1st through 10th, and neutral while driving after reaching speed limits. While making a left hand turn it went into neutral and was almost hit broadside by an 18 wheeler with my grandson in the truck. There is a TSB and 3 class action lawsuits on this issue. My vehicle is a 2017 f150 with 50,365 miles which is EXTREMELY low miles for its age. I asked for goodwill assistance but was told no by the dealership and customer support. I called EXECUTIVE AFFAIRS twice and have yet received a call. I written a letter to Ford Consumer Affairs about my situation with contact information but have not received a response. A vehicle with this mileage should not be having a major issue regardless of its age. This is a life threatening safety issue that needs immediate attention. My vehicle is currently at the dealership having this 8600 dollar repair. Ford should be waving this charge or at least financial assistance with it but all I get is being told NO or IGNORED.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0
- #11757372August 17, 2026POWER TRAIN
The transmission intermittently enters a failure mode where the wrench warning lamp illuminates and the transmission locks into its current gear, with no further shifting. This has happened multiple times without warning, including at highway speed. It sometimes recovers on its own and resumes normal shifting, then fails again later. The safety risk is loss of gear selection while moving. Depending on the gear it locks into, the vehicle cannot accelerate to merge or maintain traffic speed, or the engine runs at high RPM with no upshift available. The manufacturer has issued a safety recall for this vehicle line citing unexpected transmission downshift as the hazard, which is the same underlying condition. My family rides in this vehicle and I no longer consider it safe. A Ford dealer confirmed the failure. Codes P0715 and P0717 (input/turbine shaft speed sensor circuit) were retrieved from the powertrain control module. No gear ratio codes and no slip codes were present, indicating an electrical fault rather than mechanical failure. The dealer performed the PCM reprogramming remedy under safety recall 26S28. The condition recurred the same day, on the drive home from the dealership, and has continued since. A software calibration cannot repair a degraded electrical connection, so the remedy did not address the failure on this vehicle. The manufacturer's stated root cause is degradation of electrical connections within the transmission molded lead frame. The transmission range sensor circuit and the turbine shaft speed sensor circuit both run on that same lead frame and terminate at the same case connector. Customer Satisfaction Program 26N04 covers lead frame replacement only when transmission range sensor codes are present. My vehicle is exhibiting failure of the same component through a different circuit on that component, and is excluded from the program despite the same part failing in the same manner.
- Crash:
- No
- Fire:
- No
- Injuries:
- 0
- Deaths:
- 0