Audi S7 Service Bulletins
2,405 manufacturer communications on file.
- September 5, 2013•Document ID: 10121324Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- A101310 2018288-
- Date Added:
- October 31, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 10 number 10-02 dated September 14, 2010. Prior to engine replacement, any debris lodged in transferred assemblies must be removed. If the vehicle's engine experienced a serious mechanical problem, it is possible that small pieces of metal debris resulting from the mechanical problem may have become deposited in the intake manifold, air intake hoses, exhaust manifolds, exhaust down-pipes, turbocharger, supercharger, and/or intercooler. If these pieces are not removed prior to the installation and operation of the replacement engine, the pieces may be drawn into the combustion chamber, which can cause a knocking noise and subsequent serious engine damage.
Associated Products (154)Associated Documents - September 3, 2013•Document ID: 10243778Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Edition51
- Date Added:
- October 10, 2023
- Manufacturer:
- AUDI
SummaryAudi Elsa Newsletter
Associated Products (20)Associated Documents - August 30, 2013•Document ID: 10124668Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- A351314 2030477-
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 35 number 13-13 dated July 12, 2013. The following message appears in the information display: "Gearbox malfunction: you can continue driving". Fault entries are stored in the transmission control module. Fault codes and symptom codes must match exactly or this TSB should not be followed. Instructions for obtaining the symptom codes are in the Service section of this bulletin. Poor internal contact area on circuit board will lead to faults. Oil additives can cause the plastic circuit plates to delaminate, causing contact loss.
Associated Products (11)Associated Documents - August 30, 2013•Document ID: 10124638Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.
- Mfr Comm. #:
- A911302 2018187-
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 91 number 11-20 dated October 21, 2011. Customer may report that cracking, grinding, rattling, humming, whining, or similar interference is coming from one or more speakers. Parts of the speakers (such as the brackets, cables, or covers) or parts of the interior fittings (such as door covers, rear shelf, facings, or covers) can vibrate at certain frequencies, causing noises. The radio tuner or other control modules may be affected by electromagnetic interference from aftermarket electronic devices.
Associated Products (125)Associated Documents - August 20, 2013•Document ID: 10124665Service Bulletin/Repair InstructionsPOWER TRAIN:AUTOMATIC TRANSMISSION; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- A371313 2035049-
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummaryCustomer may report the transmission has a harsh 3-2 downshift when using Sport mode or "S" Mode. Software needs to be updated.
Associated Products (2)Associated Documents - August 16, 2013•Document ID: 10124671Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER
- Mfr Comm. #:
- A211317 2034999-
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummaryOn 4.0l bi-turbo FSI engines, the pipe on the impeller side of the bank 2 turbocharger looks discolored when compared to the pipe on the bank 1 turbocharger. The crankcase breather is only connected to the bank 2 turbocharger inlet. Blow-by gases from the crankcase breather discolor the pipe. This is a normal condition.
Associated Products (18)Associated Documents - August 14, 2013•Document ID: 10124645Service Bulletin/Repair InstructionsVISIBILITY:WINDSHIELD
- Mfr Comm. #:
- A641329 2020552-
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummaryWindshield is streaked, has a snakeskin appearance, or its surface feels rough. Residue from industrial fallout as well as normal road dirt and grime may accumulate on windshield.
Associated Products (144)Associated Documents - August 14, 2013•Document ID: 10124621Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL
- Mfr Comm. #:
- AWA-13-07
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummaryAs part of Audi's ongoing commitment to our environment, Audi is extending the Emissions Control Systems Warranty to cover cleaning of the engine cylinder head secondary air ports to remove carbon buildup under specific conditions to 10 years or 120,000 miles, whichever occurs first, from the vehicle's original in-service date for certain 2009-12 Model Year Audi vehicles with 3.2L engine, and certain 2009-2013 Model Year Audi vehicles with 3.0T engines. The vehicle's original in-service date is defined as the date the vehicle was delivered to either the original purchaser or the original lessee; or if the vehicle was first placed in service as a "demonstrator" or "company" car, on the date such vehicle was first placed in service. The warranty extension is fully transferable to subsequent owners. Audi has determined that under certain driving conditions, carbon buildup can occur in the engine cylinder head secondary airports. Due to the presence of specific fault codes caused by this carbon buildup, the Malfunction Indicator Lamp (MIL) on the instrument cluster may illuminate. The MIL is part of the on-board diagnostic system. In some locales, an illuminated MIL could cause the vehicle to fail an IM emissions inspection, vehicle registration application could be denied. Audi will diagnose, and if necessary clean the engine cylinder head secondary air ports to remove the carbon buildup at no cost to the customer as long as the vehicle is within the time and mileage limits of the warranty extension. This warranty extension covers only the diagnosis and cleaning of the cylinder head secondary air ports to remove the carbon buildup. Reimbursement is applicable only to the repairs described in this Warranty Bulletin.
Associated Products (42)Associated Documents - August 13, 2013•Document ID: 10124616Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- Customer Letter
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummaryAudi has determined that, under certain driving conditions, carbon buildup can occur in the engine cylinder head secondary air ports. Due to the presence of specific fault codes caused by this carbon buildup, the Malfunction Indicator Lamp (MIL) on the instrument cluster may illuminate. The MIL is part of your on-board diagnostic system. Please refer to your owner's manual for additional information about the MIL. In some locales, an illuminated Malfunction Indicator Lamp could cause your vehicle to fail an IM emissions inspection, and your vehicle registration application could be denied. Please be aware that other conditions (unrelated to the issue described in this letter) may cause the MIL in your vehicle to illuminate. Customers should be prepared to cover all diagnosis and repair costs for these other, unrelated conditions.
Associated Products (42)Associated Documents - August 9, 2013•Document ID: 10124649Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- A511306 2009967-
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummarySupersedes Technical Service Bulletin Group 00 number 11-23 dated June 3, 2011. Instructions for vehicle inspection, protection removal, and detailing.
Associated Products (63)Associated Documents - August 5, 2013•Document ID: 10124614Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- Dealer Letter -
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummaryThis communication is to inform you of upcoming Update 24Z6. On Audi vehicles with a 3.0L TFSI engine produced during a certain period, it is possible that the membrane on the vacuum actuator for the intake manifold flaps may tear. As a result, the intake manifold flaps do not function and the engine indicator light turns on. Install new manifold actuators.
Associated Products (21)Associated Documents - August 1, 2013•Document ID: 10124602Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Fluid Capacity C
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummaryThis document contains the fluid capacity chart.
Associated Products (3)Associated Documents - July 29, 2013•Document ID: 10243791Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Edition46
- Date Added:
- October 10, 2023
- Manufacturer:
- AUDI
SummaryAudi Elsa Newsletter
Associated Products (175)Associated Documents - July 23, 2013•Document ID: 10068767Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- 19J1-D
- Date Added:
- June 2, 2016
- Manufacturer:
- AUDI
SummarySUMMARY TO BE PROVIDED ON A FUTURE DATE.
Associated Products (4)Associated Documents - July 23, 2013•Document ID: 10250648Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- 19J1UPDATEc
- Date Added:
- February 26, 2024
- Manufacturer:
- AUDI
Summary4.0 l Quality Package (NVLW)
Associated Products (4)Associated Documents - July 23, 2013•Document ID: 10242608Service Bulletin/Repair InstructionsSTRUCTURE; ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM; EQUIPMENT; STRUCTURE:BODY:BUMPERS:ACTIVE SHUTTERS/GRILL
- Mfr Comm. #:
- 19J1b
- Date Added:
- September 25, 2023
- Manufacturer:
- AUDI
Summary4.0 l Quality Package
Associated Products (8)Associated Documents - July 23, 2013•Document ID: 10124528Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- Update Bulletin
- Date Added:
- December 5, 2017
- Manufacturer:
- AUDI
SummaryA quality package has been defined for Audi vehicles with 4.0L TFSI engine manufactured within a specific period. This Update is in effect until removed. Procedure is valid only for vehicles that show the 19J1 code in the ElsaWeb Campaign/Action Information screen on the day of repair. Vehicle must be within the New Vehicle Limited Warranty. Procedure must be performed within the allotted time frame stated in this Technical Service Bulletin. Procedure must be performed on applicable vehicles in dealer inventory prior to sale. A quality package has been defined for Audi vehicles with 4.0L TFSI engine manufactured within a specific period.
Associated Products (4)Associated Documents - July 22, 2013•Document ID: 10243790Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- Edition45
- Date Added:
- October 10, 2023
- Manufacturer:
- AUDI
SummaryAudi Elsa Newsletter
Associated Products (178)Associated Documents - July 19, 2013•Document ID: 10226502Service Bulletin/Repair InstructionsVEHICLE SPEED CONTROL:ACCELERATOR PEDAL
- Mfr Comm. #:
- 37130920287152
- Date Added:
- November 21, 2022
- Manufacturer:
- AUDI
SummaryRough gear changes both when accelerating and slowing down
Associated Products (92)Associated Documents - July 19, 2013•Document ID: 10210652Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:12V/24V/48V BATTERY; POWER TRAIN:AUTOMATIC TRANSMISSION:INTERNAL:GEARS
- Mfr Comm. #:
- 37 13 09 2028715
- Date Added:
- May 2, 2022
- Manufacturer:
- AUDI
SummaryAfter a mechatronics, torque converter, or complete gearbox replacement, the clutches must be adapted to the new component. This requires a gradual move of the clutch linings toward the optimal operating points in the most diverse load conditions. As a result, sporadic driving power disruptions lasting for less than a second or reduced shift comfort are possible over the first 500 miles. This is normal, and these issues will decrease over time. The issues can also occur if the adaptation values of the gearbox were deleted.
Associated Products (101)Associated Documents