Mercedes-Benz · Model Report
Mercedes-Benz Sprinter2012
Showing safety data for the 2012 model year only.
Mercedes-Benz · Model Report
Showing safety data for the 2012 model year only.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2012-2018 Mercedes Benz Sprinter 3500 and Freightliner Sprinter 3500 vehicles upfitted into campers or recreational vehicles. The Electronic Stability Control (ESC) unit may become disabled on these vehicles.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2012 Freightliner and Mercedes Benz Sprinter 2500 and 3500 vehicles. These vehicles are equipped with certain air bag inflators assembled into the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Daimler Vans USA, LLC (Daimler Vans) is recalling certain model year 2007-2009 Dodge Sprinter 2500 and 3500 vehicles manufactured July 1, 2006, to July 31, 2008, 2007-2014 Freightliner Sprinter 2500 and 3500 vehicles manufactured July 1, 2006, to July 1, 2014, and 2010-2014 Mercedes Benz Sprinter 2500 and 3500 vehicles manufactured July 1, 2010, to July 1, 2014. Upon deployment of the driver's frontal air bag, excessive internal pressure may cause the inflator to rupture.
Cummings Mobility Conversion & Supply (Cummings) is recalling certain model year 2006-2014 Ford E-150, E-250, E-350, Chevrolet Express, 2006-2008 Dodge Sprinter, and 2009-2014 Mercedes-Benz Sprinter, and 2013 Ford Transit Connect vehicles manufactured January 1, 2006, to October 8, 2014, equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts manufactured by Ricon Corporation after January 1, 2006. The platform side plate of the affected wheelchair lifts may crack.
This vehicle was subject to NHTSA Recall Number 19V003 involving failure of rear wheel speed sensors. The recall was completed by a dealer in April 2022 at 70,466 miles. At just under 90,000 miles in August 2026 a failure was indicated for the right rear wheel speed sensor. Error code C003A indicated on OBD-II scanner. This failure triggered ABS, ASR/ABS and EPS warning lights for functions including antilock braking, traction control and stability control. This also triggered a check engine light and speed control was disabled. The owners manual indicates a risk of accident. Dealer and MB says there is no additional warranty or action for the wheel speed sensor that repeatedly fails.
No injuries · No fire · No crash
The contact owns a 2012 Mercedes-Benz Sprinter 2500. The contact stated that on various occasions after coming to a stop at a traffic signal, the vehicle was stalling and shaking while depressing the accelerator pedal. The contact stated that the engine revved loudly before accelerating. No warning lights were illuminated. The vehicle was taken to a local dealer on various occasions; however, the failure could not be duplicated. The contact stated that the vehicle was taken to several unknown dealers for routine maintenance services, and the failure could not be duplicated. The vehicle was not yet diagnosed or repaired. The manufacturer was made aware of the failure. The approximate failure mileage was 16,000.
No injuries · No fire · No crash
Wheel speed sensor malfunction, partially addressed in NHTSA recall ID: 21V042 Why only rear speed sensors? As of Aug. 2, 2022, I am facing the replacement of both front speed sensors one of which was replaced a year ago. No ABS braking, No stability control, faulty parts creating on going safety problems not addressed in recall 21V042.
No injuries · No fire · No crash
Had a service call to repair recall items. Technician forgot to install bolts holding the transmission which led to multiple light alerts. Could have been dangerous for driver.
No injuries · No fire · No crash
The contact owns a 2012 Mercedes-Benz Sprinter 3500. The contact received notification of NHTSA Campaign Number: 21V042000 (Electronic Stability Control) however, the part to do the recall repair was not yet available. The dealer was contacted, and it was confirmed that the part was not yet available. The manufacturer was made aware of the issue. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact had not experienced a failure. Vin tool confirms parts not available.
No injuries · No fire · No crash