Mazda CX-5 Service Bulletins
589 manufacturer communications on file.
- May 4, 2021•Document ID: 10194762Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- SA-030-21
- Date Added:
- June 2, 2021
- Manufacturer:
- MAZDA
SummaryAuxiliary key blank cutting procedure: There are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary Key Trace Cut Method, B. Auxiliary Key Code Cut Method
Associated Products (7)Associated Documents - April 30, 2021•Document ID: 10191535Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 01-004-21-3773a
- Date Added:
- May 4, 2021
- Manufacturer:
- MAZDA
SummarySome vehicles may have the check engine light on with DTC P0524:00 or P055F:00 stored in memory. Contamination in the engine oil may cause the engine oil solenoid valve to become stuck, resulting in improper operation of the oil pump and improper oil pressure. DTC P0524:00 (Engine oil pressure too low), DTC P055F:00 (Engine oil pressure malfunction). The control software of the PCM has been modified to eliminate this concern. In addition, the production process has been modified to reduce contamination in the engine oil solenoid valve, oil pump, spacer and oil filter.
Associated Products (4)Associated Documents - April 30, 2021•Document ID: 10191534Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 01-002-21-3767a
- Date Added:
- May 4, 2021
- Manufacturer:
- MAZDA
SummarySome vehicle may exhibit a tapping noise from the engine during idling; etc., and synchronized to the engine rpm. The tapping noise may be caused by the switchable hydraulic lash adjuster (HLA), which may not work properly due to air bubbles accumulated in the oil passage in it. To eliminate this concern, the switchable HLA has been modified for increased oil supply to reduce air bubbles in the oil passage. NOTE: The switchable HLA can be pressed down with a finger if air bubbles have accumulated in it.
Associated Products (4)Associated Documents - April 27, 2021•Document ID: 10191539Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-013-21d
- Date Added:
- May 4, 2021
- Manufacturer:
- MAZDA
SummaryIMPORTANT NOTE: Some 2020 Mazda3 vehicles may have incorrect infotainment software version 10042 installed. The incorrect software will cause MyMazda App Connected Vehicle enrollment errors. Go to SSPC1. Some customers may complain about any of the following: Infotainment Center Display does not provide the Authorization Code during the MyMazda App Connected Vehicle enrollment (and Software Update Error message on 2020 Mazda3 only). Remote function(s) inoperative. Engine Start / Stop, Door Lock / Unlock, Lights ON / OFF
Associated Products (4)Associated Documents - April 26, 2021•Document ID: 10191538Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- SA-029-21
- Date Added:
- May 4, 2021
- Manufacturer:
- MAZDA
SummaryAPPLE CARPLAY / ANDRID AURO FREQUENTLY ASKED QUESTIONS (FAQ) The following vehicles are not equipped with Apple CarPlay⢠/ Android Autoâ¢, but it can be activated using MDARS. See Activation instructions on MGSS -> Infotainment -> MAZDA CONNECT Updates -> Apple Carplay / Android Auto MDARS Activation Instructions
Associated Products (7)Associated Documents - April 22, 2021•Document ID: 10190956Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- 01-011-21-3800
- Date Added:
- April 26, 2021
- Manufacturer:
- MAZDA
SummarySome customers may experience the CHECK ENGINE light ON with DTC P0126:00 (Thermostat stuck open) and one or more of the following symptoms: The engine takes longer to warm up, The engine temperature gauge fluctuates, The low coolant temperature indicator (blue) light stays on longer or comes on while driving, Poor heater performance, especially at idle. NOTE: Vehicles with SKYACTIV-G 2.5T are not applicable. Due to production variety of the failsafe thermostat integrated in the coolant control valve, engine coolant may enter into a dry hollow in the failsafe thermostat, resulting in unintended opening of the failsafe thermostat at lower temperatures (104-176 ðF (40-80 ðC)). To eliminate this concern, the production process of the coolant control valve has been modified.
Associated Products (4)Associated Documents - April 14, 2021•Document ID: 10190972Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- SA-012-21d
- Date Added:
- April 26, 2021
- Manufacturer:
- MAZDA
SummaryMAZDA CONNECTED SERVICES - FREQUENTLY ASKED QUESTIONS (FAQ): Index: General Questions, Setup and Getting Started, Registration / Enrollment, WI-FI General Information, WI-FI How-To, WI-FI Trial Period, Interacting With The App, Service Issues, Troubleshooting, Reception Level Inspection, Dealer Processes, Conditions for Remote Engine Start Will Not Function, Conditions for Remote Engine Start Function Will turn engine OFF, Educational Videos, Resources
Associated Products (4)Associated Documents - April 7, 2021•Document ID: 10190970Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- SA-014-21c
- Date Added:
- April 26, 2021
- Manufacturer:
- MAZDA
SummarySome customers may complain about an infotainment reboot and the infotainment system recovers if the Navigation SD card is removed (see attached video). NOTE: This concern may be present on a 2019-2020 Mazda3 or a 2020 CX-30 after the customer updates the Navigation SD card map software using Mazda Toolbox.
Associated Products (4)Associated Documents - April 7, 2021•Document ID: 10190968Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- SA-027-21
- Date Added:
- April 26, 2021
- Manufacturer:
- MAZDA
SummaryMAZDA CONNECT Symptom Troubleshooting (7th Generation Vehicles). Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure
Associated Products (4)Associated Documents - April 7, 2021•Document ID: 10190959Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- 16-001-21-3780
- Date Added:
- April 26, 2021
- Manufacturer:
- MAZDA
SummaryNOTE: This service bulletin supersedes "DRW34 - 2021 CX-9 AND CX-5 MAZDA CONNECT SETTINGS CONCERN". Some customers may notice that some items such as the View Monitor, Parking Sensor or Hands-Free Liftgate settings do not appear in customize setting screen.
Associated Products (2)Associated Documents - April 1, 2021•Document ID: 10190966Service Bulletin/Repair InstructionsTIRES:PRESSURE MONITORING AND REGULATING SYSTEMS
- Mfr Comm. #:
- SA-025-21
- Date Added:
- April 26, 2021
- Manufacturer:
- MAZDA
SummaryThe 2021 CX-5 and CX-9 will be the first 6.5 generation vehicles to be equipped with Connected Vehicle Services and some functions will be limited at launch. This service information provides a timeline of the system limitations. Gen 6.5 vs Gen 7 Gen 6.5 (2021 CX-5 and CX-9) Connected Vehicle functions will be similar to Gen 7 (2020 > CX-30 and Mazda3). The main difference is that Gen 6.5 vehicles will not include Tire Pressure Monitoring System (TPMS) information (tire pressure).
Associated Products (2)Associated Documents - March 25, 2021•Document ID: 10189948Service Bulletin/Repair InstructionsEQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-024-21
- Date Added:
- April 6, 2021
- Manufacturer:
- MAZDA
SummaryBe aware that the fuses removed at the factory have been changed. The fuses removed from the relay and fuse block (1) are as follows: Previous, Room (15A), Audio1 (15A), New, Room (25A), BOSE (25A).
Associated Products (1)Associated Documents - March 23, 2021•Document ID: 10189858Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- SA-014-21b
- Date Added:
- April 5, 2021
- Manufacturer:
- MAZDA
SummarySome customers may complaint about an infotainment reboot. The infotainment system recovers if the Navigation SD card is removed (see attached video).
Associated Products (4)Associated Documents - March 16, 2021•Document ID: 10189954Service Bulletin/Repair InstructionsEQUIPMENT; STRUCTURE
- Mfr Comm. #:
- DRW38
- Date Added:
- April 6, 2021
- Manufacturer:
- MAZDA
SummaryDRW38 - RESIDUE OR STAIN BY WRAPGUARD ON BELTLINE - On the subject vehicles shipped from MC on January 8, 2021, added wrap guard was temporarily attached on the beltline molding (both left and right) to protect the beltline molding from misty seawater (for rust prevention). The wrap guard was to be removed prior to shipment. The affected vehicles need to have the wrap guard removed and then inspect the beltline molding for any signs of adhesive residue or possible rust spots.
Associated Products (3)Associated Documents - March 15, 2021•Document ID: 10189951Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:INFOTAINMENT:SOFTWARE
- Mfr Comm. #:
- SA-013-21c
- Date Added:
- April 6, 2021
- Manufacturer:
- MAZDA
SummaryIMPORTANT NOTE: Some 2020 Mazda3 vehicles may have incorrect infotainment software version 10042 installed. The incorrect software will cause MyMazda App Connected Vehicle enrollment errors. Go to SSPC1. Some customers may complain about any of the following: Infotainment Center Display does not provide the Authorization Code during the MyMazda App, Connected Vehicle enrollment (and Software Update Error message on 2020 Mazda3 only). Remote function(s) inoperative. Engine Start / Stop, Door Lock / Unlock, Lights ON / OFF
Associated Products (4)Associated Documents - March 15, 2021•Document ID: 10189950Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; EQUIPMENT ADAPTIVE/MOBILITY
- Mfr Comm. #:
- SA-012-21c
- Date Added:
- April 6, 2021
- Manufacturer:
- MAZDA
SummaryMAZDA CONNECTED SERVICES - FREQUENTLY ASKED QUESTIONS (FAQ): Index: General Questions, Setup and Getting Started, Registration / Enrollment, WI-FI General Information, WI-FI How-To, WI-FI Trial Period, Interacting With The App, Service Issues, Troubleshooting, Reception Level Inspection, Dealer Processes, Conditions for Remote Engine Start Will Not Function, Conditions for Remote Engine Start Function Will turn engine OFF, Educational Videos, Resources
Associated Products (4)Associated Documents - March 15, 2021•Document ID: 10189797Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- MT-001-21
- Date Added:
- April 5, 2021
- Manufacturer:
- MAZDA
SummaryIf you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal Workshop Manual diagnosis. Aftermarket devices may be the cause of the electrical concern. Ask the customer if any aftermarket devices have been installed.
Associated Products (7)Associated Documents - March 11, 2021•Document ID: 10189822Service Bulletin/Repair InstructionsSTRUCTURE
- Mfr Comm. #:
- 09-009-21-3759
- Date Added:
- April 5, 2021
- Manufacturer:
- MAZDA
SummarySome customers may complain about rust at the bottom (inner side) of the doors where the seaming welt is located. It is caused by mud/sand adhering to the side sill, which scratches the paint surface when the door is opened/closed. The mud/sand is most likely brought in by the driver and/or passenger when stepping in and out of the vehicle.
Associated Products (2)Associated Documents - March 8, 2021•Document ID: 10189946Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM:ADAS:HUD:CAMERA/SENSOR; VISIBILITY
- Mfr Comm. #:
- SA-022-21
- Date Added:
- April 6, 2021
- Manufacturer:
- MAZDA
SummaryWhen performing the MGSS Workshop Manual 360ð View Monitor System Aiming Procedure, M-MDS may show error message "Procedure unsuccessful". This may be caused by light glare on the SST.
Associated Products (5)Associated Documents - March 8, 2021•Document ID: 10189871Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-020-21
- Date Added:
- April 5, 2021
- Manufacturer:
- MAZDA
SummaryKey Transmitter Power Saving Function: When the key transmitter Power Saving Function is turned ON, transmitter battery power consumption is restricted, thereby extending the transmitter battery life.
Associated Products (5)Associated Documents