Lincoln Corsair Service Bulletins
306 manufacturer communications on file.
- April 30, 2024•Document ID: 10254148Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- SSM 52499
- Date Added:
- May 3, 2024
- Manufacturer:
- LINCOLN
SummarySome 2020-2022 Corsair vehicles equipped with a head-up display (HUD) may exhibit a condition where the display does not allow the projection height to be adjusted properly. This may be due to the software installed in the HUD. To correct this condition, reprogram the HUD using the latest software level of the Ford Diagnosis and Repair System (FDRS) diagnostic tool. For claiming, use causal part 19G468 and applicable labor operation in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Associated Products (2)Associated Documents - April 29, 2024•Document ID: 10254146Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- SSM 52492
- Date Added:
- May 3, 2024
- Manufacturer:
- LINCOLN
SummarySome 2023-2024 Corsair Hybrid vehicles equipped with a 12 inch instrument panel cluster (IPC) display may exhibit a condition where the flat tow mode cannot be activated. This condition does not affect vehicle durability under normal driving conditions and no additional diagnosis or service is required for this condition at this time. Inform customers that they can continue to drive the vehicle normally but should not attempt to flat tow the vehicle. Engineering is currently working on a software solution for this condition that is expected by the 4th quarter of 2024. Replacement/reprogramming of the IPC will not resolve this condition. Monitor OASIS for additional information and schedule service appointments for customers once the repair becomes available.
Associated Products (2)Associated Documents - April 22, 2024•Document ID: 10254131Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- SSM 52465
- Date Added:
- May 3, 2024
- Manufacturer:
- LINCOLN
SummarySome 2023-2024 Mustang Mach-E/Corsair and 2024 Mustang vehicles may exhibit an audio control module (ACM) programming failure with a message displayed in the Ford Diagnosis and Repair System (FDRS) scan tool indicating Procedure Unsuccessful-Flash Software Failed To Flash. This may be due to the ACM programming routine. To correct this condition, download and click the refresh icon located next to the run icon to update the ACM - Programmable Module Installation (PMI) app. For claiming, use causal part 18C869 and applicable labor operations in Section 11 of the Service Labor Time Standards (SLTS) Manual.
Associated Products (3)Associated Documents - April 16, 2024•Document ID: 10254308Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- OTAPU1022SPBPUP
- Date Added:
- May 6, 2024
- Manufacturer:
- LINCOLN
SummarySoftware Update 24-PU0122--SPB-PUP for 2023 MY Corsair vehicles is now available. Quality Improvements include: - Reduced no start events. - Quicker brake release when customer shifts to R - Remembers Auto Vehicle Hold status thru key cycle - Warning lamp for park brake stuck event. - Message when shift to neutral occurs with driver off brakes. - Will no longer set erroneous "Service Park Brake Limited Function" during initialization.
Associated Products (1)Associated Documents - April 5, 2024•Document ID: 10253555Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- SSM 52419
- Date Added:
- April 24, 2024
- Manufacturer:
- LINCOLN
SummarySome 2023-2024 Escape/Corsair vehicles equipped with a 1.5L or 2.0L EcoBoost engine, 2024 Mustang vehicles equipped with a 2.3L EcoBoost engine, and 2024 Nautilus vehicles may exhibit an engine misfire condition with diagnostic trouble codes (DTC) P0301, P0302, P0303 and/or P0304 set in the powertrain control module (PCM). If the codes are stored in the PCM, remove and inspect the condition of all the spark plugs. If any spark plugs appear to be damaged, use a borescope to inspect the condition of the cylinder walls. If the cylinder walls are scored/scraped/damaged, replace the long block engine assembly (6006) to resolve this condition. If the cylinder walls are not scored/scraped/damaged, replace the damaged spark plug(s) and advise the customer that engineering is investigating this issue. Monitor OASIS for additional information and schedule service appointments for customers once the repair becomes available.
Associated Products (6)Associated Documents - April 4, 2024•Document ID: 10254323Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- OTAPU0221BATCYC
- Date Added:
- May 6, 2024
- Manufacturer:
- LINCOLN
SummaryQuality improvements include: -Improves Key Off Load condition that can lead to 12V battery drain due to Vehicle Dynamics Module.
Associated Products (1)Associated Documents - April 4, 2024•Document ID: 10254321Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- OTAPU0227VIRBSCo
- Date Added:
- May 6, 2024
- Manufacturer:
- LINCOLN
SummaryQuality improvements include: Numerous minor quality fixes in ECG RC9 which are not customer facing. -23 MY Corrects nuisance DTC (Electronic Horizion Availibility)
Associated Products (2)Associated Documents - April 3, 2024•Document ID: 10253552Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- SSM 52410
- Date Added:
- April 24, 2024
- Manufacturer:
- FORD
SummaryVarious vehicles have had pinpoint tests, guided routines and the Warranty and Policy Manual recentlyupdated for diagnostics and repairs on SYNC generation 3 and later applications. When performingdiagnostics and repairs on SYNC Gen 3 or later, select the diagnostics tab and search for related symptoms,DTCs and keywords. The search results will be shown in the search results pane. Read and follow allTechnical Service Bulletins (TSB), Special Service Message (SSM)s or General Service Bulletin (GSB) first if abulletin specifically addresses the vehicle concern. If there are no messages, run the appropriate diagnosticpinpoint test found in the Workshop Manual (WSM). Follow the steps in the pinpoint test. Make sure to note thetitle of the guided routine, using the correct one for the vehicle's symptom or diagnostic trouble code (DTC) iscritical. Depending on the outcome of the pinpoint test, a repair validation code (RVC) may be generated eitherin the pinpoint test or Guided Routine. If the vehicle concern still exists after following the pinpoint tests orguided routine, then a manual RVC can be generated using the RVC Assist Form. A manual RVC can only begenerated once the above process has been followed.
Associated Products (55)2024 Ford Bronco2024 Ford Bronco Sport2024 Ford Edge2024 Ford Escape2024 Ford Expedition2024 Ford F-1502024 Ford Maverick2024 Ford Mustang2024 Ford Ranger2024 Ford Transit Connect2024 Lincoln Aviator2024 Lincoln Corsair2024 Lincoln Nautilus2024 Lincoln Navigator2023 Ford Bronco2023 Ford Bronco Sport2023 Ford Edge2023 Ford Escape2023 Ford Expedition2023 Ford F-150+ 35 moreAssociated Documents - April 1, 2024•Document ID: 10252410Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
- Mfr Comm. #:
- 22N15
- Date Added:
- April 2, 2024
- Manufacturer:
- FORD
SummaryCustomer Satisfaction Program 22N15 Certain 2020-2023 Model Year Bronco Sport, Escape, Corsair, E-Series, F-650/F-750, F-53 Motorhome Chassis, F-59 Commercial Stripped Chassis Vehicles Equipped with Smart Data Link Connector (SDLC) Gateway Module Reprogramming for Inspection and Maintenance (I/M) Testing Adding Not OTA Capable Owner letters. Other documents submitted 01/02/24 & Received OTA letters submitted on 02/01/24
Associated Products (15)Associated Documents - March 8, 2024•Document ID: 10251956Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- SSM 52345
- Date Added:
- March 20, 2024
- Manufacturer:
- FORD
SummarySome 2022-2024 various Ford/Lincoln vehicles equipped with SYNC 4 may experience concern where customers are receiving an error message when trying to enroll in connected services. This may be due to the gateway module (GWM) software. To correct the concern, download and run the Transport and Factory Mode Deactivation app: under HS1 modules select BCM > Transport and Factory Mode > Download > Run. When the pop-up message appears for Change Vehicle Mode - Transport/Factory/Normal Mode, press OK. This will proceed to the Transport and Factory Mode Deactivation screen, select Unlock Vehicle Connectivity Settings (21 MY + Vehicles). A pop-up message appears noting Vehicle Is Now In Normal Mode, select OK. This will return to the Transport and Factory Mode Deactivation screen, select Exit. A final pop-up notification stating that the application is finished, select OK. For claiming, use causal part 14G490 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Associated Products (19)2024 Ford Bronco2024 Ford Edge2024 Ford Escape2024 Ford Expedition2024 Ford F-1502024 Ford Mustang2024 Ford Ranger2024 Ford Transit2024 Lincoln Corsair2024 Lincoln Navigator2023 Ford Bronco2023 Ford Edge2023 Ford Escape2023 Ford Expedition2023 Ford F-1502023 Ford Transit2023 Lincoln Corsair2023 Lincoln Nautilus2023 Lincoln NavigatorAssociated Documents - March 6, 2024•Document ID: 10251952Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- SSM 52335
- Date Added:
- March 20, 2024
- Manufacturer:
- FORD
SummaryFor 2015-2024 Ford and Lincoln vehicles equipped with turbocharged engines and customer concern of an engine oil leak, refer to Workshop Manual (WSM), Section 303-00 for oil leak inspection and testing methods. Ford has evaluated turbochargers replaced for oil leak symptoms and although oil may collect on the external surface of a turbocharger, it is extremely rare for a turbocharger assembly to be the root cause of the oil leak. Careful inspection of the turbocharger oil feed and drain tubes should be performed along with the recommended WSM procedures as needed. Warranty claims for turbocharger replacement going forward will be assessed.
Associated Products (60)2024 Ford Bronco2024 Ford Bronco Sport2024 Ford Edge2024 Ford Escape2024 Ford Expedition2024 Ford Explorer2024 Ford F-1502024 Ford Maverick2024 Ford Mustang2024 Ford Ranger2024 Ford Transit2024 Lincoln Aviator2024 Lincoln Corsair2024 Lincoln Nautilus2023 Ford Bronco2023 Ford Bronco Sport2023 Ford Edge2023 Ford Escape2023 Ford Expedition2023 Ford Explorer+ 40 moreAssociated Documents - March 4, 2024•Document ID: 10251948Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:ADAS:HUD:SOFTWARE
- Mfr Comm. #:
- SSM 52329
- Date Added:
- March 20, 2024
- Manufacturer:
- LINCOLN
SummarySome 2020-2022 Corsair vehicles equipped with a head-up display (HUD) may exhibit a condition the display does not allow the projection height to be adjusted properly. Ford is aware of the concern and this condition does not affect vehicle durability and no additional diagnosis or service is required for this condition at this time. Inform customers that they can continue to drive the vehicle and engineering is currently working on a software solution for this condition that is expected by the end of April 2024. Replacement/reprogramming of the HUD will not resolve this condition. Monitor OASIS for additional information and schedule a service appointments for customers once the repair becomes available.
Associated Products (2)Associated Documents - March 4, 2024•Document ID: 10251945Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:INFOTAINMENT; EQUIPMENT:ELECTRICAL:INFOTAINMENT:SOFTWARE
- Mfr Comm. #:
- SSM 52327
- Date Added:
- March 20, 2024
- Manufacturer:
- LINCOLN
SummarySome 2020-2022 Corsair vehicles equipped with a head-up display (HUD) may exhibit a blank HUD screen condition after programming the module. This may be due to the software level installed in the HUD module and does not affect the instrument panel cluster (IPC) display. To correct this condition, reprogram the HUD module using the latest software level of the Ford Diagnosis and Repair System (FDRS) scan tool. For claiming, use causal part 19G468 and applicable labor operation in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Associated Products (1)Associated Documents - March 1, 2024•Document ID: 10251934Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- SSM 52314
- Date Added:
- March 20, 2024
- Manufacturer:
- FORD
SummaryDuring service and repair requiring removal and replacement of a crankshaft bolt and/or crankshaft damper, achieving proper torque of the crankshaft pulley bolt is critical. Incorrect torque may allow the bolt to loosen resulting in the timing gear breaking and engine damage. Replacement of the bolt is critical to the repair and accurately following the installation procedure in the Workshop Manual (WSM) Section, 303-01 is extremely important. The bolt torque procedure can be found in the crankshaft front seal removal and installation procedure or in the engine assembly procedure.
Associated Products (67)2024 Ford Bronco2024 Ford Bronco Sport2024 Ford E-3502024 Ford E-4502024 Ford Edge2024 Ford Escape2024 Ford Expedition2024 Ford Explorer2024 Ford F-1502024 Ford Maverick2024 Ford Mustang2024 Ford Transit2024 Lincoln Aviator2024 Lincoln Corsair2024 Lincoln Nautilus2024 Lincoln Navigator2023 Ford Bronco2023 Ford Bronco Sport2023 Ford E-3502023 Ford E-450+ 47 moreAssociated Documents - February 29, 2024•Document ID: 10250852Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 52307
- Date Added:
- March 5, 2024
- Manufacturer:
- FORD
SummarySome 2020-2023 Ford and Lincoln SYNC3 equipped vehicles may experience an inaccurate notification in the FordPassî/LincolnWayî app indicating Vehicle Has Entered Deep Sleep Mode. Vehicle Has Entered Deep Sleep Mode message is expected if the vehicle has not been started for 14 consecutive days, battery voltage is at/below 9.5 volts or the body control module (BCM) 12 volt battery state of charge (SoC) drops below 50%. If the vehicle is going into deep sleep due to one of these conditions, follow normal Workshop Manual (WSM) Section 414-01 procedure to correct the concern. If the vehicle is going into deep sleep outside these conditions, this may be due to the telematics control unit (TCU) software. To correct this condition, follow the Service Procedure to update the TCU to the latest software. For claiming, use causal part 14G229 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Associated Products (30)2023 Ford Bronco Sport2023 Ford Explorer2023 Ford Maverick2023 Ford Mustang2023 Ford Ranger2023 Ford Transit Connect2023 Lincoln Aviator2022 Ford Bronco Sport2022 Ford Ecosport2022 Ford Escape2022 Ford Explorer2022 Ford Maverick2022 Ford Mustang2022 Ford Ranger2022 Ford Transit2022 Ford Transit Connect2022 Lincoln Aviator2022 Lincoln Corsair2021 Ford Bronco Sport2021 Ford Ecosport+ 10 moreAssociated Documents - February 19, 2024•Document ID: 10251487Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; BACK OVER PREVENTION:SOFTWARE
- Mfr Comm. #:
- OTAPU0102SVDFXCo
- Date Added:
- March 7, 2024
- Manufacturer:
- LINCOLN
SummarySoftware Update 24-PU0102-SVD-FX for 2024 MY Corsair vehicles is now available. Quality Improvements include: - Improved OTA deployment
Associated Products (1)Associated Documents - February 16, 2024•Document ID: 10250526Service Bulletin/Repair InstructionsSTRUCTURE:BODY:HATCHBACK/LIFTGATE; EQUIPMENT
- Mfr Comm. #:
- SSM 52269
- Date Added:
- February 23, 2024
- Manufacturer:
- FORD
Summary2022-2024 Explorer/Aviator vehicles built on or after 28-May-2022, 2022-2024 Expedition/Navigator vehicles built on or after 08-Jun-2022, 2022-2024 Escape vehicles built on or after 01-Jun-2022 and 2022 Corsair vehicles built on or after 01-Jun-2022 are no longer equipped with a hands free liftgate system. The vehicle is not misbuilt. The addition of any parts is not a warrantable repair. Do not submit a claim for this condition.
Associated Products (16)2024 Ford Escape2024 Ford Expedition2024 Ford Explorer2024 Lincoln Aviator2024 Lincoln Navigator2023 Ford Escape2023 Ford Expedition2023 Ford Explorer2023 Lincoln Aviator2023 Lincoln Navigator2022 Ford Escape2022 Ford Expedition2022 Ford Explorer2022 Lincoln Aviator2022 Lincoln Corsair2022 Lincoln NavigatorAssociated Documents - February 14, 2024•Document ID: 10250523Service Bulletin/Repair InstructionsEQUIPMENT; EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.
- Mfr Comm. #:
- SSM 52261
- Date Added:
- February 23, 2024
- Manufacturer:
- LINCOLN
SummarySome 2023 Escape vehicles with hybrid powertrain built on or before 27-Oct-2023 and 2023 Corsair vehicles with hybrid powertrain built on or before 24-Oct-2023 may exhibit an intermittent no audio condition with diagnostic trouble code (DTC) U1A00:87 stored in the accessory protocol interface module (APIM). When the audio volume control is adjusted using the steering wheel or the center display screen, the center display screen may or may not show a visual change with no change in audio volume. This may be due to the software installed in the audio control module (ACM). To correct this condition, reprogram the ACM using the latest software level of the Ford Diagnosis and Repair System (FDRS) diagnostic tool. For claiming, use causal part 18C869 and applicable labor operation in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Associated Products (1)Associated Documents - February 12, 2024•Document ID: 10251490Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; BACK OVER PREVENTION:SOFTWARE
- Mfr Comm. #:
- OTAPU0630SX2CLSC
- Date Added:
- March 7, 2024
- Manufacturer:
- LINCOLN
SummarySoftware Update 23-PU0630-SX2-CLS for 2023 MY Corsair vehicles is now available. Quality Improvements include: - Update nomenclature to BlueCruise (was Active Glide)
Associated Products (1)Associated Documents - February 6, 2024•Document ID: 10251474Service Bulletin/Repair InstructionsBACK OVER PREVENTION:SOFTWARE; ELECTRICAL SYSTEM
- Mfr Comm. #:
- OTA PU0630RGPLO
- Date Added:
- March 7, 2024
- Manufacturer:
- LINCOLN
SummarySoftware Update FPU 23-PU0630-RGT-PLO for 2023 MY Corsair vehicles is now available. Quality Improvements include: Liftgate fully opens with exterior button press.
Associated Products (1)Associated Documents