Ford Bronco Service Bulletins
477 manufacturer communications on file.
- March 18, 2026•Document ID: 11030790Service Bulletin/Repair InstructionsVEHICLE SPEED CONTROL; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 54673
- Date Added:
- April 6, 2026
- Manufacturer:
- FORD
SummarySome 2025-2026 Bronco Badlands and Raptor only vehicles may exhibit a "Cruise Control Not Available" or "Active Cruise Control Not Available" message displayed in the instrument panel cluster (IPC) with diagnostic trouble code (DTC) U0418:86 stored in the image processing module A (IPMA) and no DTCs present in the anti-lock brake (ABS) module.
Associated Products (2)Associated Documents - March 16, 2026•Document ID: 11030109Service Bulletin/Repair InstructionsVISIBILITY/WIPER; UNKNOWN OR OTHER; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 54665
- Date Added:
- March 18, 2026
- Manufacturer:
- FORD
SummarySome 2026 F-150/Bronco/Ranger/Mustang Mach-E vehicles may exhibit a blank center display screen after deactivating transport mode. To correct the condition, cycle the ignition from On/Ready to Off. Open, close and lock the door and let the vehicle sit for a minimum of 5 minutes. Reprogramming or replacement of any modules will not correct the condition. If the concern continues, refer to Workshop Manual (WSM), Section 415-00 Information and Entertainment System for normal diagnostics.
Associated Products (3)Associated Documents - March 6, 2026•Document ID: 11030471Over The AirELECTRICAL SYSTEM; UNKNOWN OR OTHER; VISIBILITY/WIPER
- Mfr Comm. #:
- SYNC-25.1.7.10.1 Bronco
- Date Added:
- April 2, 2026
- Manufacturer:
- FORD
Summary"25S49 Recall Remedy: -Infotainment software update to address frozen screens"
Associated Products (3)Associated Documents - March 5, 2026•Document ID: 11030441Over The AirVISIBILITY/WIPER; UNKNOWN OR OTHER; ELECTRICAL SYSTEM
- Mfr Comm. #:
- IPC-25.21 Bronco
- Date Added:
- April 1, 2026
- Manufacturer:
- FORD
Summary"25SC3 Recall remedy: -Instrument Panel Cluster update to prevent a potential black screen at start up"
Associated Products (1)Associated Documents - March 4, 2026•Document ID: 11029929Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; POWER TRAIN
- Mfr Comm. #:
- SSM 54629
- Date Added:
- March 11, 2026
- Manufacturer:
- FORD
SummarySome 2021-2023 Bronco vehicles may exhibit a charging system lamp that illuminates intermittently, and/or diagnostic trouble code (DTC) B11DB:08 in the body control module (BCM). This may be due to a loose fuse terminal for the low voltage high current fuse (3A). If this condition is present, compare fuse removal effort between the low voltage high current fuse and like fuses in the battery junction box (BCMC). If removal effort for the fuse is low, replace the low voltage high current fuse panel assembly to correct this condition. Refer to Workshop Manual (WSM) Section 414-01 > Removal and Installation > Low Voltage High Current Fuse. For claiming, use causal part 14526 and labor time MT14526SSM with a limit of 0.5 hours.
Associated Products (3)Associated Documents - February 27, 2026•Document ID: 11029535Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; UNKNOWN OR OTHER
- Mfr Comm. #:
- SSM 54609
- Date Added:
- March 4, 2026
- Manufacturer:
- FORD
SummarySome 2025 Bronco vehicles equipped with a 7-speaker audio system (minor feature code IDBAL) may exhibit an intermittent no audio condition. To confirm a vehicle is built with a certain minor feature code, review the build information by clicking "Additional Information" under Vehicle ID Tab > Vehicle Information, or double-clicking the vehicle identification number (VIN) in the upper left corner on Professional Technician System (PTS). To correct this condition, reprogram the audio front control module (ACM) using the latest software level of the Ford Diagnosis and Repair System (FDRS) scan tool. For claiming use causal part 18806 and labor operations 12651D and 12651D4.
Associated Products (1)Associated Documents - February 24, 2026•Document ID: 11029052Service Bulletin/Repair InstructionsUNKNOWN OR OTHER; STRUCTURE:BODY; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 54601
- Date Added:
- February 27, 2026
- Manufacturer:
- FORD
SummaryFord and Lincoln vehicles equipped with wired keyless entry keypad systems and accessory wireless keyless entry keypad systems may or may not come with a wallet card containing the master code. Unlike the integrated wired keypad, the accessory wireless keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool or from the label printed on the body control module (BCM). The Factory Keyless Entry Code application within the diagnostic scan tool will not provide an applicable master code for the accessory wireless keypad. If the wallet card for an accessory keypad is not available, the "Wireless RF Keypad Diagnosis Guide" can be referenced and provides direction on how to retrieve the master code. This guide is located under the Workshop Manual tab > Accessories > Installation > Wireless RF Keypad Diagnosis Guide > PPT C > Step C2.<br /><br /> Note: The only available keypad for some vehicles from the assembly plant is the accessory wireless keyless entry keypad. The integrated wired keypad cannot be installed on vehicles not equipped from the factory with a wired keyless entry k
Associated Products (62)2026 Ford Bronco2026 Ford Bronco Sport2026 Ford Escape2026 Ford Expedition2026 Ford Explorer2026 Ford F-1502026 Ford Maverick2026 Ford Mustang2026 Ford Ranger2025 Ford Bronco2025 Ford Bronco Sport2025 Ford Escape2025 Ford Expedition2025 Ford Explorer2025 Ford F-1502025 Ford Maverick2025 Ford Mustang2025 Ford Ranger2025 Ford Transit2024 Ford Bronco+ 42 moreAssociated Documents - February 17, 2026•Document ID: 11029082Service Bulletin/Repair InstructionsPOWER TRAIN; ENGINE; FUEL/PROPULSION SYSTEM
- Mfr Comm. #:
- SSM 54593
- Date Added:
- February 27, 2026
- Manufacturer:
- FORD
SummarySome 2024-2025 F-150, Expedition/Navigator, Escape/Corsair, Bronco, Explorer, Mustang, Maverick vehicles equipped with a 1.5/2.0/2.3/3.5L EcoBoost engine and built on 01-Oct-2024 and through 31-May-2025 may exhibit an extended crank condition, strong fuel smell in the engine oil, high engine oil level and/or may have various drivability diagnostic trouble codes (DTCs) stored in the powertrain control module (PCM) with an illuminated malfunction indicator lamp (MIL). This may be due to an internal fuel leak of the high-pressure fuel pump causing fuel to enter the crankcase and reduce fuel pressure in the direct injection fuel rail. Diagnose this condition using Pinpoint Test HP located in Workshop Manual (WSM), Section 303-04. If no DTCs are stored in the PCM, proceed from Step HP1 to Step HP5 and continue testing. Repair as necessary outside of this article. For claiming, if high-pressure fuel pump replacement is required, use causal part number 9D376 and labor operation code 9543A. If the root cause is identified as anything other than the fuel injection pump, claim the repair outside of this article.
Associated Products (20)2025 Ford Bronco2025 Ford Bronco Sport2025 Ford Escape2025 Ford Expedition2025 Ford Explorer2025 Ford F-1502025 Ford Maverick2025 Ford Mustang2025 Ford Ranger2025 Lincoln Corsair2025 Lincoln Navigator2024 Ford Bronco Sport2024 Ford Escape2024 Ford Expedition2024 Ford Explorer2024 Ford F-1502024 Ford Maverick2024 Ford Mustang2024 Lincoln Corsair2024 Lincoln NavigatorAssociated Documents - February 17, 2026•Document ID: 11029081Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- SSM 54592
- Date Added:
- February 27, 2026
- Manufacturer:
- FORD
SummaryFor 20172026 vehicles equipped with a 10R transmission, a revision to the Road Testing Vehicle procedure has been made in the WSM, located in Section 307-01 > Diagnosis and Testing. This updated procedure improves the diagnosis of customer reported transmission concerns and aids in locating the proper root cause. During diagnosis and testing, details regarding whether the condition is more prevalent when the vehicle is hot or cold, throttle percentage at the time of occurrence, vehicle speed, the specific shift involved, and whether the issue occurs during transmission engagements (N>R, N>D, R>D, or D>R) should be noted. Engineering requests including these detailed operating conditions that will significantly assist with root cause analysis. Diagnosis, testing, and repair should use established labor times outside this article.
Associated Products (43)2026 Ford Bronco2026 Ford Expedition2026 Ford Explorer2026 Ford F-1502026 Ford F-6502026 Ford Mustang2026 Ford Ranger2026 Lincoln Aviator2026 Lincoln Navigator2025 Ford Bronco2025 Ford Expedition2025 Ford Explorer2025 Ford F-1502025 Ford Mustang2025 Ford Ranger2025 Ford Transit2025 Lincoln Aviator2025 Lincoln Navigator2024 Ford Bronco2024 Ford Explorer+ 23 moreAssociated Documents - February 16, 2026•Document ID: 11028839Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- TSB 26-2054
- Date Added:
- February 17, 2026
- Manufacturer:
- FORD
SummarySome 2025 Bronco/Ranger vehicles equipped with a 2.7L EcoBoost engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P04DB stored in the powertrain control module (PCM) with no other relevant DTCs present. This may be due to the software in the PCM.
Associated Products (2)Associated Documents - February 12, 2026•Document ID: 11028833Service Bulletin/Repair InstructionsUNKNOWN OR OTHER; ELECTRICAL SYSTEM
- Mfr Comm. #:
- TSB 26-2049
- Date Added:
- February 17, 2026
- Manufacturer:
- FORD
SummarySome 2025 Bronco vehicles may exhibit a condition where the 24-hour clock reverts back to the 12-hour format after each key cycle. This may be due to the software in the accessory protocol interface module (APIM).
Associated Products (1)Associated Documents - February 11, 2026•Document ID: 11028842Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- SSM 54568
- Date Added:
- February 17, 2026
- Manufacturer:
- FORD
SummarySome 2024-2025 Bronco vehicles may exhibit a wind noise that has been isolated to the hard top front panel seal. An updated part has been released for service (M2DZ-78503A22-C). Refer to Workshop Manual, Section 501-18B Hard Top > Removal and Installation > Hard Top Front Panel Seal.
Associated Products (2)Associated Documents - February 10, 2026•Document ID: 11028830Service Bulletin/Repair InstructionsPOWER TRAIN; STRUCTURE:BODY; UNKNOWN OR OTHER; ELECTRICAL SYSTEM
- Mfr Comm. #:
- TSB 25-2621
- Date Added:
- February 17, 2026
- Manufacturer:
- LINCOLN
SummarySome vehicles listed in the Model statement above may exhibit a no crank/no start condition where the customer cannot start their vehicle. The vehicle may also exhibit a "No Key Detected" message displayed on the instrument panel cluster (IPC), and no key fob works in the back up slot. The remote keyless entry (RKE) functionality will work to lock/unlock the vehicle.
Associated Products (14)Associated Documents - February 4, 2026•Document ID: 11029001Over The AirUNKNOWN OR OTHER; VISIBILITY/WIPER; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SYNC-25.2.1.6.5.2 Bronco
- Date Added:
- February 25, 2026
- Manufacturer:
- FORD
SummaryQuality Improvements Include: - Bug Fixing and Feature improvements. - Resolves black screen issue caused when there is no SiriusXM disk space.
Associated Products (4)Associated Documents - February 2, 2026•Document ID: 11028793Service Bulletin/Repair InstructionsPOWER TRAIN; ENGINE
- Mfr Comm. #:
- SSM 54544
- Date Added:
- February 12, 2026
- Manufacturer:
- FORD
SummarySome 2025 Bronco/Ranger vehicles equipped with a 2.7L EcoBoost engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P04DB stored in the powertrain control module (PCM) with no other relevant DTCs present. Refer to Workshop Manual (WSM), Section 303-08B Engine Emission Control > Diagnosis and Testing > Crankcase Ventilation > Pinpoint Test > steps HG1-3 to check for leaks in the positive crankcase ventilation (PCV) and repair as needed. If no leaks are found in the PCV system, this condition may be due to the software in the PCM. This condition does not affect vehicle durability and no additional diagnosis is required for this condition at this time. The replacement of components or reprogramming of modules will not resolve this condition. Clear the DTC and return the vehicle to the customer. Inform customers that they can continue to drive the vehicle and engineering is currently working on a solution for this condition that is expected in Q2 2026. If a vehicle comes in for this condition, submit a Global Concern Report (GCR) and monitor Professional Tech
Associated Products (2)Associated Documents - January 14, 2026•Document ID: 11027721Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- TSB 25-2637
- Date Added:
- January 21, 2026
- Manufacturer:
- FORD
SummaryThis article supersedes 25-2493 to update the Service Procedure. Some of the vehicles listed in the Model statement above may exhibit a rattle from the right loadspace trim panel at high audio system volumes. This may be due to loose and/or broken attachments.
Associated Products (1)Associated Documents - January 8, 2026•Document ID: 11027610Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- TSB 25-2625
- Date Added:
- January 13, 2026
- Manufacturer:
- FORD
SummaryThis article supersedes 24-2387 to update the Parts List, Service Procedure enhancements, and labor operation allowances in place of M-time. Some of the vehicles listed in the Model statement above equipped with a factory subwoofer may exhibit a rattle from right loadspace trim panel at high audio system volumes. This may be due to lose and/or broken attachments.
Associated Products (4)Associated Documents - January 8, 2026•Document ID: 11027609Service Bulletin/Repair InstructionsSUSPENSION; UNKNOWN OR OTHER
- Mfr Comm. #:
- TSB 25-2613
- Date Added:
- January 13, 2026
- Manufacturer:
- FORD
SummaryThis article supersedes TSB 24-2408 to update the parts list. Some of the vehicles listed in the Model statement above may exhibit a loud front end clink/clunk noise that leads to the identification of a cracked or broken front differential frame mount bracket. This may be due to flexing of the front differential from driving in 4L for extended periods of time. Note: Advise the customer that 4L/Rock Crawl drive mode should only be used when necessary, as using 4L when not necessary can cause damage to the vehicle. Refer to the Owner's Manual for additional information.
Associated Products (4)Associated Documents - January 7, 2026•Document ID: 11027613Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- SSM 54479
- Date Added:
- January 14, 2026
- Manufacturer:
- FORD
SummarySome 2025 Bronco vehicles equipped with a 7 speaker audio system (minor feature code IDBAL) may exhibit diagnostic trouble codes (DTCs) B128A:01, B128A:11, B128A:12, B128A:13, B1288:11, B1288:12 and/or B1238:17 stored in the audio front control module (ACM). To confirm a vehicle is built with a certain minor feature code, review the build information by clicking "Additional Information" under Vehicle ID Tab > Vehicle Information, or double-clicking the vehicle identification number (VIN) in the upper left corner on Professional Technician System (PTS). Clear the DTCs and if the DTCs return with no customer facing symptoms, this condition may be due to the ACM software. Replacement of the ACM and/or speakers will not resolve this condition. Inform the customers that they can continue to drive the vehicle and engineering is currently working on a solution for this condition that is expected in Q2 2026. Continue to monitor PTS for additional information and schedule service appointments for customers once the repair becomes available.
Associated Products (1)Associated Documents - December 18, 2025•Document ID: 11027148Service Bulletin/Repair InstructionsUNKNOWN OR OTHER; ELECTRICAL SYSTEM; FUEL/PROPULSION SYSTEM
- Mfr Comm. #:
- SSM 54453
- Date Added:
- January 7, 2026
- Manufacturer:
- FORD
SummarySome 2025 Bronco vehicles equipped with a 7-speaker audio system (minor feature code IDBAL) may exhibit an intermittent no audio condition. To confirm a vehicle is built with a certain minor feature code, review the build information by clicking "Additional Information" under Vehicle ID Tab > Vehicle Information, or double-clicking the vehicle identification number (VIN) in the upper left corner on Professional Technician System (PTS). To correct this condition, disconnect the negative battery cable and wait two minutes before reconnecting to temporarily restore audio. Inform the customers that they can continue to drive the vehicle and engineering is currently working on a solution for this condition that is expected in Q2 2026. Continue to monitor PTS for additional information and schedule service appointments for customers once the repair becomes available.
Associated Products (1)Associated Documents