Toyota · Model Report
Showing safety data for the 2006 model year only.
Southeast Toyota Distributors, LLC (SET) is recalling certain 2005-2011 4Runner, Highlander, Sequoia, and Sienna, 2005-2010 Avalon and Tundra, 2006-2008 Camry Solara, 2006-2010 Highlander hybrid, 2006-2011 Rav4 and Tacoma, 2007-2010 FJ Cruiser, 2007-2011 Camry hybrid, 2009-2010 Venza, 2010-2012 Prius, 1988-1990 and 2005-2010 Camry, and 1989 and 2009-2010 Corolla vehicles equipped with aftermarket accessory seat heaters with a copper strand heating element. The electrical wiring in the seat heaters may be damaged when the seat cushion is compressed.
Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2010-2011 Prius and Corolla, 2009-2011 Venza, 2006-2010 Avalon, 2007-2010 FJ Cruiser, 2005-2011 Sienna and Sequoia, 2006-2011 Tacoma 4x2 and 4x4, Camry, Highlander, Tundra 4x2 and 4x4, and 2007-2011 Rav4 and 4Runner. The affected vehicles may experience compression of the seat cushion which may damage the seat heater wiring.
Toyota is recalling certain model year 2006-2010 Highlander hybrid vehicles manufactured February 16, 2005, through July 29, 2010; and model year 2006-2008 Lexus RX400h vehicles manufactured February 23, 2005, through December 2, 2008. The Intelligent Power Module (IPM) inside the inverter module may contain transistors that have higher operating temperatures than the solder can support and the transistors may be heat damaged by the solder. If this occurs, various warning lamps, including the malfunction indicator lamp, slip indicator light, brake system warning light, and master warning light, will be illuminated on the instrument panel.
TOYOTA IS RECALLING CERTAIN MODEL YEAR 2004 AVALON VEHICLES; 2004 AND 2005 CAMRY, CAMRY SOLARA, HIGHLANDER, AND SIENNA VEHICLES, 2006 HIGHLANDER HYBRID; 2004 AND 2005 LEXUS ES330 AND RX330; AND 2006 LEXUS RX400H VEHICLES MANUFACTURED FROM JUNE 1, 2004 THROUGH MARCH 31, 2005, EQUIPPED WITH THE 1MZ-FE OR 3MZ-FE ENGINE. THE AMOUNT OF ADHESIVE AGENT APPLIED BETWEEN THE OUTER RING AND THE TORSIONAL RUBBER DAMPER (INNER RING) IN THE CRANKSHAFT PULLEY MAY BE INADEQUATE. IF THE ADHESIVE IS INSUFFICIENT, THERE IS A POSSIBILITY THAT THE OUTER RING MAY BECOME MISALIGNED AND IT MAY NOT PROPERLY ROTATE WITH THE INNER RING, CAUSING NOISE AND/OR ILLUMINATION OF THE BATTERY DISCHARGE INDICATOR LIGHT.
TOYOTA IS RECALLING CERTAIN MODEL YEAR 2006-2007 HIGHLANDER HYBRID AND LEXUS RX400H PASSENGER CARS MANUFACTURED FROM FEBRUARY 16, 2005, THROUGH AUGUST 30, 2006. A MODULE INSIDE THE INVERTER MODULE MAY CONTAIN INADEQUATELY SOLDERED TRANSISTORS THAT DURING HIGH-LOAD DRIVING, MAY BE DAMAGED BY HEAT CAUSED BY THE LARGE CURRENT. IF THIS OCCURS, VARIOUS WARNING LAMPS, INCLUDING THE MALFUNCTION INDICATOR LAMP, SLIP INDICATOR LIGHT, BRAKE SYSTEM WARNING LIGHT, AND MASTER WARNING LIGHT, WILL BE ILLUMINATED ON THE INSTRUMENT PANEL.
Multiple warning lights appeared on the dash board including ABS, also check VSC system in the dialogue window. Code C1391 (Abnormal leak in accumulator) appeared in a diagnostic scan. After some internet research, it appears this a common problem with the 2006 Toyota Highlander and is a very costly repair $2000-$4000. The leaky accumulator creates an unsafe driving condition as the ABS and VSC system are disabled due to the leak. Due to the high number of failures for these vehicles, I feel that Toyota should take responsibility and warranty this part and repair. Thank you
No injuries · No fire · No crash
The Antilock Braking Actuator has failed. This seems to be a known issue and was already recalled on the Toyota Camry. Toyota sells the part for $1500 locally and labor will be added to that as well - which will put the cost of replacing this critical part almost above the current value of the vehicle. This is a safety issue if I lose braking capability. It has not yet catastrophically failed, but is making a buzzing sound which is the indication of this unit losing brake fluid pressure and trying to keep the brake booster pump running to restore the pressure. The booster pump will burn out, possibly catch fire and/or blow the fuse and then the braking will loose power assist, and with unit in place....that makes braking almost impossible as it is NOT a typical brake system, all fluid goes through this failed module and without the electronic boost assist, one can not press the pedal hard enough to engage the brakes.
No injuries · No fire · No crash
The ABS/Brake Actuator is going out. There is a stuttering as I'm coming to a stop, but when I brake from normal speeds to slow down, there is no stutter/vibration. Only when I'm going very slow and about to stop the car is when I feel a vibration/stutter in the vehicle. When pressing the brakes all the way down, there is a weird chirping/clicking noise that comes from under the hood towards the passenger side of the car. I do not have and did not get any warning lights about this, even still I don't have any. I have taken it to 2 mechanic shops now and they both have diagnosed the brake/ABS actuator failing.
No injuries · No fire · No crash
ABS actuator/accumulator issue on 2006 Toyota Highlander hybrid limited. Internal component failure there are recalls on others but not this particular year. Was driving along hit the brakes and got hard pedal. Yes there were other indicator lights on including the VSC system and traction control I came to an intersection and I couldn't stop I couldn't even kind of stop it was all hard pedal were before it was normal as if there wasn't an issue. I've done a lot of research and I've seen a lot of forums and people are complaining that Toyota isn't backing this problem my 2006 Toyota is in perfect condition not a single problem except for this break issue and if you take it to Toyota the park cost $2,200 in about roughly over $5,000 to fix it well who wants to put that kind of money into a car of that year the problem is it's just a shame and a safety deal that it put my family's life at risk we could have crashed it if I wasn't an actual driver by trade I wouldn't have known how to react in other families could be harmed in this. It's worth looking into I did not need to make her police report because I veered off into a field that saved my family's life. As of now I'm hoping to open a recall campaign and just have that part replaced I could have a car that could drive another 100,000 miles and give and keepToyota good name
No injuries · No fire · No crash
The contact owns a 2006 Toyota Highlander. The contact stated that while driving approximately 60 MPH, the vehicle failed to decelerate while the brake pedal was depressed. The contact stated that excessive pressure was needed on the brake pedal to stop the vehicle. The ABS and ESC warning lights were illuminated. In addition, there was an abnormal sound coming from underneath the vehicle. The vehicle was towed to a local independent mechanic, where it was diagnosed and determined that the ABS unit needed to be replaced. The vehicle was towed to another independent mechanic for a second opinion, and it was confirmed that the ABS unit needed to be replaced. The vehicle was taken to a local dealer, where it was diagnosed and determined that the brake actuator needed to be upgraded. The vehicle was diagnosed, and parts were ordered for the repair. The manufacturer was not made aware of the failure. The failure mileage was approximately 195,000.
No injuries · No fire · No crash