Nissan Sentra Service Bulletins
710 manufacturer communications on file.
- November 30, 2020•Document ID: 10183976Service Bulletin/Repair InstructionsEXTERIOR LIGHTING:BRAKE LIGHTS; ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM:STARTER ASSEMBLY
- Mfr Comm. #:
- NTB20-082
- Date Added:
- December 9, 2020
- Manufacturer:
- NISSAN
Summary2016-2019 SENTRA; ENGINE NO CRANK/NO START IF YOU CONFIRM The engine will not crank when pressing the push-button ignition switch and applying the brake pedal. ï· ACCESSORY and IGNITION ON modes can be turned on and off with the no start condition present. ï· The stop lamps will be inoperative with the no-start condition present. ACTION Install a new brake lamp switch and install a rubber grommet with the parts listed in PARTS INFORMATION on the last page of this bulletin.
Associated Products (4)Associated Documents - November 30, 2020•Document ID: 10183979Service Bulletin/Repair InstructionsCOMMUNICATION:MANUFACTURER TELEMATICS; ELECTRICAL SYSTEM
- Mfr Comm. #:
- NTB20-085
- Date Added:
- December 9, 2020
- Manufacturer:
- NISSAN
SummaryTELEMATICS CONTROL UNIT RESET AFTER AUTOMATIC COLLISION NOTIFICATION SERVICE INFORMATION The Telematics Control Unit (TCU) has the ability to send an automatic collision notification when the vehicle is involved in an accident. Once an automatic collision notification is performed, the function becomes disabled. The TCU must be reset to re-enable the automatic collision notification function. This bulletin describes how to reset the TCU after an automatic collision notification has been performed.
Associated Products (7)Associated Documents - November 30, 2020•Document ID: 10183978Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM); EQUIPMENT; ELECTRICAL SYSTEM
- Mfr Comm. #:
- NTB20-084
- Date Added:
- December 9, 2020
- Manufacturer:
- NISSAN
SummaryINTELLIGENT KEY UNIT DTC P161D STORED IN THE ECM SERVICE INFORMATION DTC P161D (IMMOBILIZER) will not cause: ï· The MIL to turn ON. ï· The Remote Engine Start to become inoperative. ï· The âNo Key Detectedâ message to appear. ï· An impact to any of the vehicleâs functions or performance. If other DTCs are stored with P161D, perform the diagnosis and repair procedures, outlined in the ESM, for the other DTCs first. ï· After the other DTCs have been resolved and P161D does not clear, proceed with the diagnosis and repair, outlined in the ESM, for DTC P161D.
Associated Products (3)Associated Documents - November 12, 2020•Document ID: 10184023Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- NTB20-016b
- Date Added:
- December 9, 2020
- Manufacturer:
- NISSAN
SummaryRADIO INTERMITTENTLY REBOOTS DURING AUDIO PLAYBACK VIA BLUETOOTH CONNECTED IPHONE This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Associated Products (15)Associated Documents - November 5, 2020•Document ID: 10184025Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EQUIPMENT
- Mfr Comm. #:
- NTB20-052a
- Date Added:
- December 9, 2020
- Manufacturer:
- NISSAN
SummaryREAR DOOR ALERT SERVICE INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Associated Products (3)Associated Documents - November 5, 2020•Document ID: 10184016Service Bulletin/Repair InstructionsLANE DEPARTURE: SENSING SYSTEM: CAMERA; FORWARD COLLISION AVOIDANCE
- Mfr Comm. #:
- NTB19-042a
- Date Added:
- December 9, 2020
- Manufacturer:
- NISSAN
SummaryAEB WARNING LIGHT BLINKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Associated Products (43)2021 Nissan Altima2021 Nissan Armada2021 Nissan Kicks2021 Nissan Leaf2021 Nissan Maxima2021 Nissan Murano2021 Nissan Rogue2021 Nissan Sentra2021 Nissan Titan2021 Nissan Versa2020 Nissan Altima2020 Nissan Armada2020 Nissan Kicks2020 Nissan Leaf2020 Nissan Maxima2020 Nissan Murano2020 Nissan Rogue2020 Nissan Sentra2020 Nissan Titan2020 Nissan Versa+ 23 moreAssociated Documents - October 14, 2020•Document ID: 10182363Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- NTB20-074
- Date Added:
- November 9, 2020
- Manufacturer:
- NISSAN
Summary2021 ROGUE AND 2020 SENTRA; BCM SERVICE INFORMATION SERVICE INFORMATION ï· When replacing the BCM, ALWAYS replace it with a new one. ï· Module configuration MUST BE performed before pairing the BCM and intelligent key unit. Once the BCM and intelligent key unit have been paired, portions of the configuration are locked and can no longer be changed. ï· When replacing the BCM, it is critical to follow the work procedure as detailed in the ESM. ï For Rogue, go to ELECTRICAL & POWER CONTROL > BODY CONTROL SYSTEM > BASIC INSPECTION > ADDITIONAL SERVICE WHEN REPLACING BCM. ï For Sentra, go to ELECTRICAL & POWER CONTROL > BODY CONTROL SYSTEM > BASIC INSPECTION > INSPECTION & ADJUSTMENT > ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT (BCM).
Associated Products (2)Associated Documents - October 14, 2020•Document ID: 10182362Service Bulletin/Repair InstructionsEQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT
- Mfr Comm. #:
- NTB20-073
- Date Added:
- November 9, 2020
- Manufacturer:
- NISSAN
Summary2021 ROGUE AND 2020 SENTRA; INTELLIGENT KEY UNIT SERVICE INFORMATION SERVICE INFORMATION ï· When replacing the intelligent key unit (hands free module), ALWAYS replace it with a new one. ï· Module configuration MUST BE performed before NATS initialization (key registration). Once NATS initialization has been performed, portions of the configuration are locked and can no longer be changed. ï· When replacing the intelligent key unit, it is critical to follow the work procedure as detailed in the ESM. ï For Rogue, go to BODY EXTERIOR, DOORS, ROOF & VEHICLE SECURITY >DOOR & LOCK > BASIC INSPECTION > ADDITIONAL SERVICE WHEN REPLACING INTELLIGENT KEY UNIT. ï For Sentra, go to BODY EXTERIOR, DOORS, ROOF & VEHICLE SECURITY >DOOR & LOCK > BASIC INSPECTION > INTELLIGENT KEY UNIT >ADDITIONAL SERVICE WHEN REPLACING INTELLIGENT KEY UNIT.
Associated Products (2)Associated Documents - September 16, 2020•Document ID: 10181008Service Bulletin/Repair InstructionsEQUIPMENT:APPLIANCE:AIR CONDITIONER
- Mfr Comm. #:
- NTB99-037a
- Date Added:
- October 8, 2020
- Manufacturer:
- NISSAN
SummarySENTRA/200SX A/C HIGH PRESSURE HOSE SERVICE CAMPAIGN Service Campaign ID # P9111 is no longer active. ï· Repair orders opened after this bulletinâs published date are no longer eligible for reimbursement under Campaign ID # P9111. ï· Discard all previous versions of NTB99-037.
Associated Products (6)Associated Documents - August 31, 2020•Document ID: 10179617Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:ADAS; FORWARD COLLISION AVOIDANCE; LANE DEPARTURE
- Mfr Comm. #:
- NTB20-061
- Date Added:
- September 11, 2020
- Manufacturer:
- NISSAN
SummaryTRAFFIC SIGN RECOGNITION OR LANE DEPARTURE WARNING MALFUNCTION DISPLAYED AND MIL ON WITH DTC C2503-54 AND/OR C1F6B-54 STORED IF YOU CONFIRM The customer states that one of the following warnings is displayed on the vehicle information display along with the AEB Warning Light: ï· Traffic Sign Recognition Malfunction Displayed ï· Lane Departure Warning Malfunction Displayed And ï· The MIL is ON with DTC C2503-54 (CAMERA AIMING INCMP) and/or C1F6B-54 (CAMERA UNIT MALF) stored. NOTE: If DTC C2500-49 and/or C1F6B-49 is stored, this TSB does not apply. ACTION ï· If the vehicle was built on or before 1/31/2020, remove material from the lane camera and then reprogram the lane camera control unit. ï· If the vehicle was built after 1/31/2020 but before 5/29/2020, skip to step 6 and reprogram only the lane camera control unit.
Associated Products (1)Associated Documents - August 26, 2020•Document ID: 10179612Service Bulletin/Repair InstructionsEQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.; ELECTRICAL SYSTEM:WIRING:SWITCHES/KNOBS/BUTTONS
- Mfr Comm. #:
- NTB20-046c
- Date Added:
- September 11, 2020
- Manufacturer:
- NISSAN
SummaryVOLUME KNOB DOES NOT FUNCTION PROPERLY This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Associated Products (9)Associated Documents - July 24, 2020•Document ID: 10178241Service Bulletin/Repair InstructionsEQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- NTB98-048a
- Date Added:
- August 9, 2020
- Manufacturer:
- NISSAN
SummaryVOLUNTARY SERVICE CAMPAIGN ENGINE MOUNT REPLACEMENT Service Campaign ID # PU803 is no longer active. ï· Repair orders opened after this bulletinâs published date are no longer eligible for reimbursement under Campaign ID # PU803. ï· Discard all previous versions of NTB98-048.
Associated Products (2)Associated Documents - July 22, 2020•Document ID: 10178239Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION
- Mfr Comm. #:
- NTB20-055
- Date Added:
- August 9, 2020
- Manufacturer:
- NISSAN
Summary2020 SENTRA; A/T SHIFT LOCK AND REMOTE START INOPERATIVE WITH NEW BCM SERVICE PART SERVICE INFORMATION After installing a new BCM service part, if the Intelligent Key UNLOCK button is pressed before performing the configuration with CONSULT-III plus, certain BCM configuration parameters will be permanently locked in the default setting; one of these parameters is Remote Engine Start (RES). ï· The default setting for Remote Engine Start is WITHOUT. ï· The RES function WILL BE permanently disabled if the UNLOCK button is pressed BEFORE the BCM service part is configured. IMPORTANT: To avoid permanently disabling the RES feature after replacing the BCM, the configuration procedure must be performed first so that all of the vehicle features operate correctly. Avoid pressing the UNLOCK button on the Intelligent Key after a BCM replacement. Wait until the configuration process has completed and the default configuration has been overwritten with the correct data before pressing any Intelligent Key buttons. Things to remember when replacing a BCM: ï· It is not necessary to register Intelligent Keys to a new BCM. ï· Never press the UNLOCK button on the Intelligent Key until the configuration settings step has been completed. ï· Complete the configuration of the BCM either manually, or by downloading saved configuration from the previous BCM (stored in CONSULT-III plus).
Associated Products (1)Associated Documents - July 21, 2020•Document ID: 10178248Service Bulletin/Repair InstructionsEQUIPMENT; FUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- PM948 2020 Sentr
- Date Added:
- August 9, 2020
- Manufacturer:
- NISSAN
SummaryFuel Filler Door Bumper Dealer Inventory *****Dealer Announcement***** Nissan is conducting a dealer inventory quality action to remove excessive rubber from the fuel lid bumpers on 4,860 specific 2020 Sentra vehicles identified in Service Comm. The fuel filler door may be difficult to open due to the base fuel lid bumper sticking to the lid. Affected vehicles are not subject to stop sale and are either currently in dealer inventory or assigned and in transit to the dealer. *****What Dealers Should Do***** PLEASE FOLLOW THE ATTACHED REPAIR INSTRUCTIONS: 1. Verify if vehicles are affected by this quality action using Service Comm or DBS National Service History â Open Campaigns I.D. PM948 . New vehicles in dealer inventory can also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). ⢠Refer to NPSB 15-460 for additional information Please continue to check newly arriving inventory for campaign applicability. 2. Use the attached procedure to remedy vehicles affected by this quality action. . Dealers will receive one (1) trim guide per affected dealership. This special tool will be sent to affected dealers via Fed-Ex on July 22, 2020. ⢠Dealers can contact [email protected] to obtain a replacement trim guide, if needed. 3. The service department should submit the applicable warranty claim for the action performed so it can be closed on Service Comm and release the vehicle. ***** Dealer Responsibility ***** It is the dealerâs responsibility to check Service Comm or DBS National Service History â Open Campaign using the appropriate campaign I.D for the remedy status on each affected vehicle currently in new vehicle inventory.
Associated Products (1)Associated Documents - July 17, 2020•Document ID: 10178236Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ELECTRICAL SYSTEM; STRUCTURE:BODY:DOOR
- Mfr Comm. #:
- NTB20-052
- Date Added:
- August 9, 2020
- Manufacturer:
- NISSAN
Summary2020 SENTRA; REAR DOOR ALERT SERVICE INFORMATION SERVICE INFORMATION This bulletin contains supplemental information related to the rear door alert system on 2020 Sentra models. Although the Electronic Service Manual (ESM) should be the primary source of information for inspection, diagnosis, and repair, the supplemental information in this bulletin will assist in these areas. The information in this bulletin includes: ï· Rear door alert description ï· How to turn the rear door alert system on and off ï· How to turn the horn alert function on and off ï· Vehicle information display messages ï· Rear door alert operation NOTE: Do NOT replace the BCM for a rear door alert concern unless all information in this bulletin has been reviewed and the concern has been verified to be abnormal.
Associated Products (1)Associated Documents - July 16, 2020•Document ID: 10178245Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT
- Mfr Comm. #:
- P5202 2004-05 Al
- Date Added:
- August 9, 2020
- Manufacturer:
- NISSAN
SummaryExpiration Notification - 2.5 Liter Power Valve Dealer Announcement ***** Campaign Summary***** In 2005, Nissan launched a Voluntary Service Campaign on certain 2004 Model Year Nissan Sentra and 2004-2005 Model Year Nissan Altima vehicles equipped with 2.5 Liter engines to inspect and, if necessary, replace the power valve screws with new ones. There is a possibility that the power valve screws located in the intake manifold may become loose. If this condition occurs the Malfunction Indicator Lamp (MIL) may illuminate and unstable engine idling or power loss may occur. Parts specified for this campaign are no longer available through Nissan. This customer service campaign and customer reimbursement for these repairs are no longer available. ***** What Dealers Should Do ***** 1. Service Com will deactivate P5202 on any unrepaired VINs on July 16, 2020. No further dealer action is required. ***** Release Schedule ***** Repair . Campaign bulletin NTB05-058 has been updated to reflect expiration of this voluntary service campaign. Please discard older copies. Owner Notification . No expiration notices are being sent to customers.
Associated Products (3)Associated Documents - July 15, 2020•Document ID: 10178225Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; EQUIPMENT
- Mfr Comm. #:
- NTB05-058c
- Date Added:
- August 9, 2020
- Manufacturer:
- NISSAN
SummaryVOLUNTARY SERVICE CAMPAIGN QR25DE POWER VALVE Service Campaign ID # P5202 is no longer active. ï· Repair orders opened after this bulletinâs published date are no longer eligible for reimbursement under Campaign ID # P5202. ï· Discard all previous versions of NTB05-058.
Associated Products (3)Associated Documents - July 10, 2020•Document ID: 10178249Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE; EQUIPMENT
- Mfr Comm. #:
- PM957 2020 Sentr
- Date Added:
- August 9, 2020
- Manufacturer:
- NISSAN
SummaryFuel Feed Tube Clip Dealer Inventory *****Dealer Announcement***** Nissan is conducting a dealer inventory quality action to inspect the fuel feed tube clip and, if necessary, secure it to the fuel line on 9,667 specific 2020 Sentra vehicles identified in Service Comm. Due to a production issue, a small number of fuel line clips may not have been properly set on the high-pressure fuel line and may need to be secured as a result. If the fuel feed tube clip is missing, or damaged, the fuel line will need to be replaced. Affected vehicles are subject to stop sale and are either currently in dealer inventory or assigned and in transit to the dealer. *****What Dealers Should Do***** PLEASE FOLLOW THE ATTACHED REPAIR INSTRUCTIONS: 1. Verify if vehicles are affected by this quality action using Service Comm or DBS National Service History â Open Campaigns I.D. PM957 ï· New vehicles in dealer inventory can also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). ï§ Refer to NPSB 15-460 for additional information ï· Please continue to check newly arriving inventory for campaign applicability. 2. Please do not drive, loan, sell or trade the specific vehicles in Dealer Inventory subject to this Quality Action. 3. Dealers must use the attached procedure to inspect and, if necessary, secure the fuel tube clip prior to retail delivery of the vehicle. ï· If the fuel feed tube clip is damaged or missing, dealers should replace the fuel line as per the instructions in the Electronic Service Manual (ESM). 4. The service department should submit the applicable warranty claim for the action performed so it can be closed on Service Comm and release the vehicle.
Associated Products (1)Associated Documents - July 1, 2020•Document ID: 10178251Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- U3005 1991-93 Se
- Date Added:
- August 9, 2020
- Manufacturer:
- NISSAN
SummaryExpiration Notification â Fuel Pump Dealer Announcement ***** Campaign Summary***** In 1993, Nissan launched a Voluntary Service Campaign on certain 1991-1993 Model Year Nissan Sentra (B13) and 1993 Altima (U13) vehicles to inspect and, if necessary, replace the fuel pump. It was determined that the fuel pumps on the subject vehicles may experience accelerated brush wear. Parts specified for this campaign are no longer available through Nissan. This customer service campaign and customer reimbursement for these repairs are no longer available. ***** What Dealers Should Do ***** 1. Service Comm will deactivate U3005 on any unrepaired VINs on July 1, 2020. No further dealer action is required.
Associated Products (4)Associated Documents - July 1, 2020•Document ID: 10178247Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:LABELS
- Mfr Comm. #:
- PM606 2007 Sentr
- Date Added:
- August 9, 2020
- Manufacturer:
- NISSAN
SummaryExpiration Notification â Fuse Decal Dealer Announcement ***** Campaign Summary***** In 2006, Nissan launched a Voluntary Service Campaign on certain 2007 Model Year Nissan Sentra (B16) vehicles to replace the fuse cover decal with a new decal containing the correct reference. It was determined some of these vehicles may have an incorrect decal installed on the rear side of the sunglass holder. The incorrect fuse cover decal incorrectly specifies a 15 amp fuse for the stop lamp circuit, instead of the 10 amp fuse. All affected vehicles contain the correct 10 amp fuse. Affected customers were sent a new fuse cover decal including instructions on how to replace the decal themselves. Parts specified for this campaign are no longer available through Nissan. This customer service campaign and customer reimbursement for these repairs are no longer available. ***** What Dealers Should Do ***** 1. Service Comm will deactivate PM606 on any unrepaired VINs on July 1, 2020. No further dealer action is required.
Associated Products (1)Associated Documents