Mazda CX-90 Service Bulletins
502 manufacturer communications on file.
- February 5, 2026•Document ID: 11029491Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- SA-007-26
- Date Added:
- March 4, 2026
- Manufacturer:
- MAZDA
SummaryOn some vehicles, an engine oil leak from the rear of the engine at the turbocharger drain back tube could be be confused as an oil leak from behind the bell housing. The bolt holes for the drain back tube to the block are drilled through to the inside of the engine and thread sealer was not properly applied to the bolts threads, causing oil to leak past the threads. NOTE: The WSM was updated to show these bolts are a to be replaced if removed. New bolts will have thread sealer already applied.
Associated Products (3)Associated Documents - February 3, 2026•Document ID: 11028093Service Bulletin/Repair InstructionsENGINE
- Mfr Comm. #:
- 01-002-26
- Date Added:
- February 3, 2026
- Manufacturer:
- MAZDA
SummarySome vehicles may exihibit a vibration in the accelerator pedal and steering wheel when accelerating during a sharp left-hand turn. An abnormal noise may also be heard from the footwell area. This may be caused by insufficient clearance between the engine mount stopper rubber and the engine mount bracket. Customer may state: - Vehicle shudders/vibrates on left turns, most often when accelerating from a stop or entering a driveway. - They feel a pop or grind in the accelerator pedal when the vibration occurs. - They hear a rumbling or grinding noise, mainly from the right side, during the left-turn shudder. NOTE: The condition does not occur at shallow steering angles or when the vehicle is stationary and the steering effort remains unchanged when the vibration and noise are present.
Associated Products (5)Associated Documents - January 26, 2026•Document ID: 11028133Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- SA-005-26
- Date Added:
- February 3, 2026
- Manufacturer:
- MAZDA
SummaryThere are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary Key Trace Cut Method • B. Auxiliary Key Code Cut Method 2019 and newer models require a 10-digit key code to accurately cut keys • 5-digit codes CANNOT be provided for 2019 and newer vehicles (the traditional 5-digit code from the key tag or driver's door lock cylinder is not sufficient and will not be issued for key cutting on these models). • Only Mazda-approved key cutting machines can process these 10-digit codes. • Many older key machines do not support 10-digit codes and cannot be updated to do so. In these cases, dealers will need to purchase one of the newer Mazda-approved key cutting machines capable of handling this requirement. • For a list of current Mazda-approved machines and purchasing options, refer to the Mazda Dealer Equipment Program or view the current Mazda approved key machines below.
Associated Products (40)2026 Mazda CX-302026 Mazda CX-52026 Mazda CX-502026 Mazda CX-702026 Mazda CX-902026 Mazda Mazda32026 Mazda MX-52025 Mazda CX-302025 Mazda CX-52025 Mazda CX-502025 Mazda CX-702025 Mazda CX-902025 Mazda Mazda32025 Mazda MX-52024 Mazda CX-302024 Mazda CX-52024 Mazda CX-502024 Mazda CX-902024 Mazda Mazda32024 Mazda MX-5+ 20 moreAssociated Documents - January 13, 2026•Document ID: 11028097Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- 09-003-26
- Date Added:
- February 3, 2026
- Manufacturer:
- MAZDA
SummarySome vehicles may exhibit a key-in lock situation when the speed-sensitive door lock activates unexpectedly while idling in the P-range. This may be caused by the noise generated by the Anti-lock Braking System (ABS) wheel speed sensor being mistakenly recognized as a vehicle speed pulse. To eliminate this concern, the IC chip in the ABS wheel speed sensor has been modified.
Associated Products (5)Associated Documents - January 7, 2026•Document ID: 11028095Service Bulletin/Repair InstructionsSEATS
- Mfr Comm. #:
- 09-001-26
- Date Added:
- February 3, 2026
- Manufacturer:
- MAZDA
SummaryThere are wrinkles on the leather seat cushion and/or seat back surface at PDI, when new vehicle is delivered, or when new upholstery is installed under Warranty repair. NOTE: This repair is not a permanent fix, it is meant to make new seats look their best when the vehicle is first presented to the customer. Wrinkles may not be completely removed after the repair is completed. Leather is a natural material and may develop some wrinkles due to aging and wear during normal usage.
Associated Products (33)2026 Mazda CX-302026 Mazda CX-52026 Mazda CX-502026 Mazda CX-702026 Mazda CX-902026 Mazda Mazda32026 Mazda MX-52025 Mazda CX-302025 Mazda CX-52025 Mazda CX-502025 Mazda CX-702025 Mazda CX-902025 Mazda Mazda32025 Mazda MX-52024 Mazda CX-302024 Mazda CX-52024 Mazda CX-502024 Mazda CX-902024 Mazda Mazda32024 Mazda MX-5+ 13 moreAssociated Documents - January 6, 2026•Document ID: 11028129Service Bulletin/Repair InstructionsSTRUCTURE:BODY; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-003-26
- Date Added:
- February 3, 2026
- Manufacturer:
- MAZDA
SummaryCustomers may report that the liftgate does not open or unlatch (from closed or an ajar position). This may happen after a discharged battery or after charging a dead battery.
Associated Products (6)Associated Documents - January 5, 2026•Document ID: 11028127Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- SA-001-26
- Date Added:
- February 3, 2026
- Manufacturer:
- MAZDA
SummarySome customers may report an odor or water in the HVAC system and upon inspection, the cabin air filter may be found to be wet.
Associated Products (40)2026 Mazda CX-302026 Mazda CX-52026 Mazda CX-502026 Mazda CX-702026 Mazda CX-902026 Mazda Mazda32026 Mazda MX-52025 Mazda CX-302025 Mazda CX-52025 Mazda CX-502025 Mazda CX-702025 Mazda CX-902025 Mazda Mazda32025 Mazda MX-52024 Mazda CX-302024 Mazda CX-52024 Mazda CX-502024 Mazda CX-902024 Mazda Mazda32024 Mazda MX-5+ 20 moreAssociated Documents - December 17, 2025•Document ID: 11026917Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-061-25
- Date Added:
- January 4, 2026
- Manufacturer:
- MAZDA
SummaryIf you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.
Associated Products (40)2026 Mazda CX-302026 Mazda CX-502026 Mazda CX-702026 Mazda CX-902026 Mazda Mazda32026 Mazda MX-52025 Mazda CX-302025 Mazda CX-52025 Mazda CX-502025 Mazda CX-702025 Mazda CX-902025 Mazda Mazda32025 Mazda MX-52024 Mazda CX-302024 Mazda CX-52024 Mazda CX-502024 Mazda CX-902024 Mazda Mazda32024 Mazda MX-52023 Mazda CX-30+ 20 moreAssociated Documents - December 17, 2025•Document ID: 11026913Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; UNKNOWN OR OTHER
- Mfr Comm. #:
- SA-060-25
- Date Added:
- January 3, 2026
- Manufacturer:
- MAZDA
SummarySome customers may experience a message "TCU Malfunction. Have the Vehicle Inspected" in the instrument cluster. The following DTC's may be stored: B1252:87-8B:TCU - COMMUNICATION ERROR WITH CONNECTIVITY MASTER UNIT (CMU) • U0198:00-03:CMU - COMMUNICATION ERROR WITH EMERGENCY CALL UNIT/TELEMATICS COMMUNICATION UNIT
Associated Products (10)Associated Documents - December 17, 2025•Document ID: 11026912Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; FUEL/PROPULSION SYSTEM
- Mfr Comm. #:
- SA-059-25
- Date Added:
- January 3, 2026
- Manufacturer:
- MAZDA
SummarySome vehicles may experience the CHECK ENGINE light ON with one of the following DTCs or a combination of these DTCs. P0451 • P2422 • P2451 • P0441 • This may be caused by a concern with the fuel pressure sensor or shutter valve operation.
Associated Products (5)Associated Documents - December 17, 2025•Document ID: 11026908Service Bulletin/Repair InstructionsUNKNOWN OR OTHER; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-017-25d
- Date Added:
- January 3, 2026
- Manufacturer:
- MAZDA
SummaryMazda Connect Services - Frequently Asked Questions (FAQ)
Associated Products (34)2026 Mazda CX-302026 Mazda CX-502026 Mazda CX-702026 Mazda CX-902026 Mazda Mazda32026 Mazda MX-52025 Mazda CX-302025 Mazda CX-52025 Mazda CX-502025 Mazda CX-702025 Mazda CX-902025 Mazda Mazda32025 Mazda MX-52024 Mazda CX-302024 Mazda CX-52024 Mazda CX-502024 Mazda CX-902024 Mazda Mazda32024 Mazda MX-52023 Mazda CX-30+ 14 moreAssociated Documents - December 16, 2025•Document ID: 11026916Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; EXTERIOR LIGHTING; ENGINE
- Mfr Comm. #:
- SA-023-25c
- Date Added:
- January 4, 2026
- Manufacturer:
- MAZDA
SummarySome customers may complain about any of the following: 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative. Engine Start / Stop • Door Lock / Unlock • Lights ON / OFF • Climate Control • 3. MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ". Page
Associated Products (34)2026 Mazda CX-302026 Mazda CX-502026 Mazda CX-702026 Mazda CX-902026 Mazda Mazda32026 Mazda MX-52025 Mazda CX-302025 Mazda CX-52025 Mazda CX-502025 Mazda CX-702025 Mazda CX-902025 Mazda Mazda32025 Mazda MX-52024 Mazda CX-302024 Mazda CX-52024 Mazda CX-502024 Mazda CX-902024 Mazda Mazda32024 Mazda MX-52023 Mazda CX-30+ 14 moreAssociated Documents - December 12, 2025•Document ID: 11026911Service Bulletin/Repair InstructionsENGINE; POWER TRAIN; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SA-058-25
- Date Added:
- January 3, 2026
- Manufacturer:
- MAZDA
SummaryThe 7G large platform utilizes a new 8-speed automatic transmission. Due to changes in the parking lock mechanism, which is now hydraulically operated, the neutral range in the transmission can only be achieved if the engine is running (or “Ready-On” for PHEV). With this design, there is no provision to manually engage neutral. This can cause challenges to dealers, customers, or towing providers when a vehicle cannot start and can't move, usually due to a discharged (dead) battery. In the event that a vehicle cannot be started or achieve “ready-on”, wheel dollies must be used to allow the vehicle to be rolled and moved. NOTE: The following procedure is for moving vehicle around the service shop and not for towing purposes. Please reference the owner's manual for towing instructions.
Associated Products (5)Associated Documents - December 5, 2025•Document ID: 11026910Service Bulletin/Repair InstructionsSERVICE BRAKES; UNKNOWN OR OTHER; SUSPENSION
- Mfr Comm. #:
- SA-057-25
- Date Added:
- January 3, 2026
- Manufacturer:
- MAZDA
SummaryA technician may report that DTC U0415:68 - VCM (Vehicle Control Module) cannot be cleared after replacing the DSC (Dynamic Stability Control) module.
Associated Products (5)Associated Documents - December 4, 2025•Document ID: 11026906Service Bulletin/Repair InstructionsSTRUCTURE:BODY
- Mfr Comm. #:
- 09-045-25
- Date Added:
- January 3, 2026
- Manufacturer:
- MAZDA
SummarySome customers may experience that the fuel lid and charge lid do not lock or unlock during door lock/unlock operation. This is caused by: Improper dimensional accuracy of the lid actuator lock mechanism Incomplete control logic in the R-ESU software To eliminate this concern: The mold design of the lid actuator was modified. The control software of the R-ESU was revised.
Associated Products (18)Associated Documents - December 2, 2025•Document ID: 11026905Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- 09-044-25
- Date Added:
- January 3, 2026
- Manufacturer:
- MAZDA
SummarySome customers may experience a bottle tilts to the left when using the second-row cup holder in 6-passenger center walk-through vehicle. This is caused by a combination of dimensional defects in multiple components. To eliminate this concern the component dimensions have been modified to ensure the cup remains level.
Associated Products (3)Associated Documents - November 27, 2025•Document ID: 11026354Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- SA-056-25
- Date Added:
- December 5, 2025
- Manufacturer:
- MAZDA
SummaryWhen inspected, the differential or PTO oil is dark or black. This is considered normal and NO repair should be performed. During production, differential ring and pinion gears receive a manganese phosphate coating (commonly referred to as black oxide). This coating forms a porous, oil-retentive surface that improves boundary lubrication and reduces adhesive wear during initial contact cycles. Designed as a sacrificial layer, it is gradually removed under load throughout the break-in process. As a result, after the first few hundred miles, or at the initial gear oil service interval, the lubricant may appear darkened by the worn-off coating. It will contain trace ferrous particles from the normal run-in of the gear teeth and bearing surfaces. This condition is expected and does not, by itself, indicate an issue with the differential or PTO gears.
Associated Products (36)2026 Mazda CX-302026 Mazda CX-502026 Mazda CX-702026 Mazda CX-902026 Mazda Mazda32026 Mazda MX-52025 Mazda CX-302025 Mazda CX-52025 Mazda CX-502025 Mazda CX-702025 Mazda CX-902025 Mazda Mazda32025 Mazda MX-52024 Mazda CX-302024 Mazda CX-52024 Mazda CX-502024 Mazda CX-902024 Mazda Mazda32024 Mazda MX-52023 Mazda CX-30+ 16 moreAssociated Documents - November 26, 2025•Document ID: 11026353Service Bulletin/Repair InstructionsSERVICE BRAKES
- Mfr Comm. #:
- SA-055-25
- Date Added:
- December 5, 2025
- Manufacturer:
- MAZDA
SummarySome vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern. NOTE: Before following this Service Alert repair procedure, ensure published TSBs in MGSS have been completed per model year.
Associated Products (40)2026 Mazda CX-302026 Mazda CX-52026 Mazda CX-502026 Mazda CX-702026 Mazda CX-902026 Mazda Mazda32026 Mazda MX-52025 Mazda CX-302025 Mazda CX-52025 Mazda CX-502025 Mazda CX-702025 Mazda CX-902025 Mazda Mazda32025 Mazda MX-52024 Mazda CX-302024 Mazda CX-52024 Mazda CX-502024 Mazda CX-902024 Mazda Mazda32024 Mazda MX-5+ 20 moreAssociated Documents - November 20, 2025•Document ID: 11026352Service Bulletin/Repair InstructionsUNKNOWN OR OTHER
- Mfr Comm. #:
- SA-053-25
- Date Added:
- December 5, 2025
- Manufacturer:
- MAZDA
SummaryThis Service Alert provides additional guidance about operation and procedure of the Driver Personalization System from the start of driver recognition to the end of the driving position restoration. OUTLINE OF PROCEDURE TIMING. Timing (start/completion/discontinuing) of driver recognition and a driving position restoration:
Associated Products (5)Associated Documents - November 19, 2025•Document ID: 11026347Service Bulletin/Repair InstructionsWHEELS
- Mfr Comm. #:
- SA-020-25a
- Date Added:
- December 5, 2025
- Manufacturer:
- MAZDA
SummaryThere have been warranty claims submitted for growling or bearing whine noise in differentials, transfer units and transmissions where the source of the noise was a wheel bearing. This misdiagnosis can lead to multiple repair attempts, warranty debits, and additional inconvenience and/or cost to the customer. To reduce the chance of this occurring, please follow the steps outlined in the repair procedure.
Associated Products (37)2026 Mazda CX-302026 Mazda CX-502026 Mazda CX-702026 Mazda CX-902026 Mazda Mazda32026 Mazda MX-52025 Mazda CX-302025 Mazda CX-52025 Mazda CX-502025 Mazda CX-702025 Mazda CX-902025 Mazda Mazda32025 Mazda MX-52024 Mazda CX-302024 Mazda CX-52024 Mazda CX-502024 Mazda CX-902024 Mazda Mazda32024 Mazda MX-52023 Mazda CX-30+ 17 moreAssociated Documents